From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, Marko Kovacevic <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
Bruce Richardson <bruce.richardson@intel.com>,
"Radu Nicolau" <radu.nicolau@intel.com>,
Akhil Goyal <akhil.goyal@nxp.com>,
"Tomasz Kantecki" <tomasz.kantecki@intel.com>
Cc: <dev@dpdk.org>, Pavan Nikhilesh <pbhagavatula@marvell.com>
Subject: [dpdk-dev] [PATCH 1/2] examples/l3fwd: increase number of routes
Date: Wed, 30 Oct 2019 10:53:16 +0530 [thread overview]
Message-ID: <20191030052318.1167-1-pbhagavatula@marvell.com> (raw)
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Increase the number of routes from 8 to 16 that are statically added for
lpm and em mode as most of the SoCs support more than 8 interfaces.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
examples/l3fwd/l3fwd_em.c | 72 ++++++++++++++++++++++++++++++++++++++
examples/l3fwd/l3fwd_lpm.c | 16 +++++++++
2 files changed, 88 insertions(+)
diff --git a/examples/l3fwd/l3fwd_em.c b/examples/l3fwd/l3fwd_em.c
index 74a7c8fa4..c07a5b937 100644
--- a/examples/l3fwd/l3fwd_em.c
+++ b/examples/l3fwd/l3fwd_em.c
@@ -103,6 +103,18 @@ static struct ipv4_l3fwd_em_route ipv4_l3fwd_em_route_array[] = {
{{RTE_IPV4(201, 0, 0, 0), RTE_IPV4(200, 20, 0, 1), 102, 12, IPPROTO_TCP}, 1},
{{RTE_IPV4(111, 0, 0, 0), RTE_IPV4(100, 30, 0, 1), 101, 11, IPPROTO_TCP}, 2},
{{RTE_IPV4(211, 0, 0, 0), RTE_IPV4(200, 40, 0, 1), 102, 12, IPPROTO_TCP}, 3},
+ {{RTE_IPV4(121, 0, 0, 0), RTE_IPV4(100, 10, 0, 1), 101, 11, IPPROTO_TCP}, 4},
+ {{RTE_IPV4(221, 0, 0, 0), RTE_IPV4(200, 20, 0, 1), 102, 12, IPPROTO_TCP}, 5},
+ {{RTE_IPV4(131, 0, 0, 0), RTE_IPV4(100, 30, 0, 1), 101, 11, IPPROTO_TCP}, 6},
+ {{RTE_IPV4(231, 0, 0, 0), RTE_IPV4(200, 40, 0, 1), 102, 12, IPPROTO_TCP}, 7},
+ {{RTE_IPV4(141, 0, 0, 0), RTE_IPV4(100, 30, 0, 1), 101, 11, IPPROTO_TCP}, 8},
+ {{RTE_IPV4(241, 0, 0, 0), RTE_IPV4(200, 40, 0, 1), 102, 12, IPPROTO_TCP}, 9},
+ {{RTE_IPV4(151, 0, 0, 0), RTE_IPV4(100, 30, 0, 1), 101, 11, IPPROTO_TCP}, 10},
+ {{RTE_IPV4(251, 0, 0, 0), RTE_IPV4(200, 40, 0, 1), 102, 12, IPPROTO_TCP}, 11},
+ {{RTE_IPV4(161, 0, 0, 0), RTE_IPV4(100, 30, 0, 1), 101, 11, IPPROTO_TCP}, 12},
+ {{RTE_IPV4(261, 0, 0, 0), RTE_IPV4(200, 40, 0, 1), 102, 12, IPPROTO_TCP}, 13},
+ {{RTE_IPV4(171, 0, 0, 0), RTE_IPV4(100, 30, 0, 1), 101, 11, IPPROTO_TCP}, 14},
+ {{RTE_IPV4(271, 0, 0, 0), RTE_IPV4(200, 40, 0, 1), 102, 12, IPPROTO_TCP}, 15},
};
static struct ipv6_l3fwd_em_route ipv6_l3fwd_em_route_array[] = {
@@ -125,6 +137,66 @@ static struct ipv6_l3fwd_em_route ipv6_l3fwd_em_route_array[] = {
{0xfe, 0xb0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
{0xfe, 0xb0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
102, 12, IPPROTO_TCP}, 3},
+
+ {{
+ {0xfe, 0xc0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xc0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 101, 11, IPPROTO_TCP}, 4},
+
+ {{
+ {0xfe, 0xd0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xd0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 102, 12, IPPROTO_TCP}, 5},
+
+ {{
+ {0xfe, 0xe0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xe0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 101, 11, IPPROTO_TCP}, 6},
+
+ {{
+ {0xfe, 0xf0, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xf0, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 102, 12, IPPROTO_TCP}, 7},
+
+ {{
+ {0xfe, 0x81, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0x81, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 101, 11, IPPROTO_TCP}, 8},
+
+ {{
+ {0xfe, 0x92, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0x92, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 102, 12, IPPROTO_TCP}, 9},
+
+ {{
+ {0xfe, 0xa3, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xa3, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 101, 11, IPPROTO_TCP}, 10},
+
+ {{
+ {0xfe, 0xb4, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xb4, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 102, 12, IPPROTO_TCP}, 11},
+
+ {{
+ {0xfe, 0xc5, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xc5, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 101, 11, IPPROTO_TCP}, 12},
+
+ {{
+ {0xfe, 0xd6, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xd6, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 102, 12, IPPROTO_TCP}, 13},
+
+ {{
+ {0xfe, 0xe7, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xe7, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 101, 11, IPPROTO_TCP}, 14},
+
+ {{
+ {0xfe, 0xf8, 0, 0, 0, 0, 0, 0, 0x02, 0x1e, 0x67, 0xff, 0xfe, 0, 0, 0},
+ {0xfe, 0xf8, 0, 0, 0, 0, 0, 0, 0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
+ 102, 12, IPPROTO_TCP}, 15},
};
struct rte_hash *ipv4_l3fwd_em_lookup_struct[NB_SOCKETS];
diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
index a3a65f7fc..ace5823b5 100644
--- a/examples/l3fwd/l3fwd_lpm.c
+++ b/examples/l3fwd/l3fwd_lpm.c
@@ -51,6 +51,14 @@ static struct ipv4_l3fwd_lpm_route ipv4_l3fwd_lpm_route_array[] = {
{RTE_IPV4(192, 18, 5, 0), 24, 5},
{RTE_IPV4(192, 18, 6, 0), 24, 6},
{RTE_IPV4(192, 18, 7, 0), 24, 7},
+ {RTE_IPV4(192, 18, 8, 0), 24, 8},
+ {RTE_IPV4(192, 18, 9, 0), 24, 9},
+ {RTE_IPV4(192, 18, 10, 0), 24, 10},
+ {RTE_IPV4(192, 18, 11, 0), 24, 11},
+ {RTE_IPV4(192, 18, 12, 0), 24, 12},
+ {RTE_IPV4(192, 18, 13, 0), 24, 13},
+ {RTE_IPV4(192, 18, 14, 0), 24, 14},
+ {RTE_IPV4(192, 18, 15, 0), 24, 15},
};
/* 2001:0200::/48 is IANA reserved range for IPv6 benchmarking (RFC5180) */
@@ -63,6 +71,14 @@ static struct ipv6_l3fwd_lpm_route ipv6_l3fwd_lpm_route_array[] = {
{{32, 1, 2, 0, 0, 0, 0, 0, 0, 5, 0, 0, 0, 0, 0, 0}, 48, 5},
{{32, 1, 2, 0, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 0}, 48, 6},
{{32, 1, 2, 0, 0, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0}, 48, 7},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0}, 48, 8},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 9, 0, 0, 0, 0, 0, 0}, 48, 9},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 10, 0, 0, 0, 0, 0, 0}, 48, 10},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 11, 0, 0, 0, 0, 0, 0}, 48, 11},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 12, 0, 0, 0, 0, 0, 0}, 48, 12},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0, 0, 0}, 48, 13},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 14, 0, 0, 0, 0, 0, 0}, 48, 14},
+ {{32, 1, 2, 0, 0, 0, 0, 0, 0, 15, 0, 0, 0, 0, 0, 0}, 48, 15},
};
#define IPV4_L3FWD_LPM_NUM_ROUTES \
--
2.17.1
next reply other threads:[~2019-10-30 5:23 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-30 5:23 pbhagavatula [this message]
2019-10-30 5:23 ` [dpdk-dev] [PATCH 2/2] examples/l3fwd: print port bdf when initializing routes pbhagavatula
2019-11-08 8:51 ` [dpdk-dev] [PATCH 1/2] examples/l3fwd: increase number of routes David Marchand
2020-08-02 18:16 ` [dpdk-dev] [PATCH v2 1/3] " pbhagavatula
2020-08-02 18:16 ` [dpdk-dev] [PATCH v2 2/3] examples/l3fwd: use IP reserved addresses for EM mode pbhagavatula
2020-10-23 14:11 ` David Marchand
2020-08-02 18:16 ` [dpdk-dev] [PATCH v2 3/3] examples/l3fwd: print port bdf when initializing routes pbhagavatula
2021-10-03 20:11 ` [dpdk-dev] [PATCH 1/3] examples/l3fwd: increase number of routes pbhagavatula
2021-10-03 20:11 ` [dpdk-dev] [PATCH 2/3] examples/l3fwd: print port bdf when adding routes pbhagavatula
2021-11-04 10:28 ` Walsh, Conor
2021-11-05 7:27 ` Pavan Nikhilesh Bhagavatula
2021-10-03 20:11 ` [dpdk-dev] [PATCH 3/3] examples/l3fwd: use reserved addresses for EM mode pbhagavatula
2021-10-03 20:24 ` [dpdk-dev] [PATCH v4 1/3] examples/l3fwd: increase number of routes pbhagavatula
2021-10-03 20:24 ` [dpdk-dev] [PATCH v4 2/3] examples/l3fwd: print port bdf when adding routes pbhagavatula
2021-10-03 20:24 ` [dpdk-dev] [PATCH v4 3/3] examples/l3fwd: use reserved addresses for EM mode pbhagavatula
2021-11-03 20:53 ` David Marchand
2021-11-05 7:30 ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2021-11-04 10:28 ` [dpdk-dev] [PATCH v4 1/3] examples/l3fwd: increase number of routes Walsh, Conor
2021-11-05 7:27 ` Pavan Nikhilesh Bhagavatula
2021-11-05 8:38 ` [dpdk-dev] [PATCH v5 " pbhagavatula
2021-11-05 8:38 ` [dpdk-dev] [PATCH v5 2/3] examples/l3fwd: print port bdf when adding routes pbhagavatula
2021-11-05 9:34 ` Walsh, Conor
2021-11-05 8:38 ` [dpdk-dev] [PATCH v5 3/3] examples/l3fwd: use reserved addresses for EM mode pbhagavatula
2021-11-16 10:03 ` David Marchand
2021-11-05 9:28 ` [dpdk-dev] [PATCH v5 1/3] examples/l3fwd: increase number of routes Walsh, Conor
2021-10-04 15:46 ` [dpdk-dev] [PATCH " Stephen Hemminger
2019-11-11 7:46 [dpdk-dev] [PATCH 1/2] " Pavan Nikhilesh Bhagavatula
2020-07-30 21:28 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191030052318.1167-1-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).