From: <pbhagavatula@marvell.com>
To: <jerinj@marvell.com>, Thomas Monjalon <thomas@monjalon.net>,
"Marko Kovacevic" <marko.kovacevic@intel.com>,
Ori Kam <orika@mellanox.com>,
"Bruce Richardson" <bruce.richardson@intel.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Akhil Goyal <akhil.goyal@nxp.com>,
Tomasz Kantecki <tomasz.kantecki@intel.com>,
Sunil Kumar Kori <skori@marvell.com>,
"Pavan Nikhilesh" <pbhagavatula@marvell.com>
Cc: <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v8 01/10] examples/l2fwd-event: add default poll mode routines
Date: Wed, 30 Oct 2019 21:56:42 +0530 [thread overview]
Message-ID: <20191030162651.3001-2-pbhagavatula@marvell.com> (raw)
In-Reply-To: <20191030162651.3001-1-pbhagavatula@marvell.com>
From: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add the default l2fwd poll mode routines similar to examples/l2fwd.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
MAINTAINERS | 5 +
examples/Makefile | 1 +
examples/l2fwd-event/Makefile | 59 ++++
examples/l2fwd-event/l2fwd_common.c | 91 ++++++
examples/l2fwd-event/l2fwd_common.h | 127 ++++++++
examples/l2fwd-event/l2fwd_poll.c | 177 +++++++++++
examples/l2fwd-event/l2fwd_poll.h | 25 ++
examples/l2fwd-event/main.c | 446 ++++++++++++++++++++++++++++
examples/l2fwd-event/meson.build | 15 +
examples/meson.build | 2 +-
10 files changed, 947 insertions(+), 1 deletion(-)
create mode 100644 examples/l2fwd-event/Makefile
create mode 100644 examples/l2fwd-event/l2fwd_common.c
create mode 100644 examples/l2fwd-event/l2fwd_common.h
create mode 100644 examples/l2fwd-event/l2fwd_poll.c
create mode 100644 examples/l2fwd-event/l2fwd_poll.h
create mode 100644 examples/l2fwd-event/main.c
create mode 100644 examples/l2fwd-event/meson.build
diff --git a/MAINTAINERS b/MAINTAINERS
index 717c31801..3df03f9fe 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1496,6 +1496,11 @@ M: Tomasz Kantecki <tomasz.kantecki@intel.com>
F: doc/guides/sample_app_ug/l2_forward_cat.rst
F: examples/l2fwd-cat/
+M: Sunil Kumar Kori <skori@marvell.com>
+M: Pavan Nikhilesh <pbhagavatula@marvell.com>
+F: examples/l2fwd-event/
+T: git://dpdk.org/next/dpdk-next-eventdev
+
F: examples/l3fwd/
F: doc/guides/sample_app_ug/l3_forward.rst
diff --git a/examples/Makefile b/examples/Makefile
index 75c56710f..c4d1343de 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -36,6 +36,7 @@ endif
DIRS-$(CONFIG_RTE_LIBRTE_HASH) += ipv4_multicast
DIRS-$(CONFIG_RTE_LIBRTE_KNI) += kni
DIRS-y += l2fwd
+DIRS-y += l2fwd-event
ifneq ($(PQOS_INSTALL_PATH),)
DIRS-y += l2fwd-cat
endif
diff --git a/examples/l2fwd-event/Makefile b/examples/l2fwd-event/Makefile
new file mode 100644
index 000000000..73f02dd3b
--- /dev/null
+++ b/examples/l2fwd-event/Makefile
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(C) 2019 Marvell International Ltd.
+#
+
+# binary name
+APP = l2fwd-event
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+SRCS-y += l2fwd_poll.c
+SRCS-y += l2fwd_common.c
+
+# Build using pkg-config variables if possible
+ifeq ($(shell pkg-config --exists libdpdk && echo 0),0)
+
+all: shared
+.PHONY: shared static
+shared: build/$(APP)-shared
+ ln -sf $(APP)-shared build/$(APP)
+static: build/$(APP)-static
+ ln -sf $(APP)-static build/$(APP)
+
+PKGCONF=pkg-config --define-prefix
+
+PC_FILE := $(shell $(PKGCONF) --path libdpdk)
+CFLAGS += -O3 $(shell $(PKGCONF) --cflags libdpdk)
+LDFLAGS_SHARED = $(shell $(PKGCONF) --libs libdpdk)
+LDFLAGS_STATIC = -Wl,-Bstatic $(shell $(PKGCONF) --static --libs libdpdk)
+
+build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build
+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED)
+
+build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build
+ $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC)
+
+build:
+ @mkdir -p $@
+
+.PHONY: clean
+clean:
+ rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared
+ test -d build && rmdir -p build || true
+
+else # Build using legacy build system
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, detect a build directory, by looking for a path with a .config
+RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config)))))
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+include $(RTE_SDK)/mk/rte.extapp.mk
+endif
diff --git a/examples/l2fwd-event/l2fwd_common.c b/examples/l2fwd-event/l2fwd_common.c
new file mode 100644
index 000000000..c206415d0
--- /dev/null
+++ b/examples/l2fwd-event/l2fwd_common.c
@@ -0,0 +1,91 @@
+#include "l2fwd_common.h"
+
+int
+l2fwd_event_init_ports(struct l2fwd_resources *rsrc)
+{
+ uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+ uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+ struct rte_eth_conf port_conf = {
+ .rxmode = {
+ .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
+ .split_hdr_size = 0,
+ },
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+ };
+ uint16_t nb_ports_available = 0;
+ uint16_t port_id;
+ int ret;
+
+ /* Initialise each port */
+ RTE_ETH_FOREACH_DEV(port_id) {
+ struct rte_eth_conf local_port_conf = port_conf;
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_rxconf rxq_conf;
+ struct rte_eth_txconf txq_conf;
+
+ /* skip ports that are not enabled */
+ if ((rsrc->enabled_port_mask & (1 << port_id)) == 0) {
+ printf("Skipping disabled port %u\n", port_id);
+ continue;
+ }
+ nb_ports_available++;
+
+ /* init port */
+ printf("Initializing port %u... ", port_id);
+ fflush(stdout);
+ rte_eth_dev_info_get(port_id, &dev_info);
+ if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
+ local_port_conf.txmode.offloads |=
+ DEV_TX_OFFLOAD_MBUF_FAST_FREE;
+ ret = rte_eth_dev_configure(port_id, 1, 1, &local_port_conf);
+ if (ret < 0)
+ rte_panic("Cannot configure device: err=%d, port=%u\n",
+ ret, port_id);
+
+ ret = rte_eth_dev_adjust_nb_rx_tx_desc(port_id, &nb_rxd,
+ &nb_txd);
+ if (ret < 0)
+ rte_panic("Cannot adjust number of descriptors: err=%d, port=%u\n",
+ ret, port_id);
+
+ rte_eth_macaddr_get(port_id, &rsrc->eth_addr[port_id]);
+
+ /* init one RX queue */
+ fflush(stdout);
+ rxq_conf = dev_info.default_rxconf;
+ rxq_conf.offloads = local_port_conf.rxmode.offloads;
+ ret = rte_eth_rx_queue_setup(port_id, 0, nb_rxd,
+ rte_eth_dev_socket_id(port_id),
+ &rxq_conf,
+ rsrc->pktmbuf_pool);
+ if (ret < 0)
+ rte_panic("rte_eth_rx_queue_setup:err=%d, port=%u\n",
+ ret, port_id);
+
+ /* init one TX queue on each port */
+ fflush(stdout);
+ txq_conf = dev_info.default_txconf;
+ txq_conf.offloads = local_port_conf.txmode.offloads;
+ ret = rte_eth_tx_queue_setup(port_id, 0, nb_txd,
+ rte_eth_dev_socket_id(port_id),
+ &txq_conf);
+ if (ret < 0)
+ rte_panic("rte_eth_tx_queue_setup:err=%d, port=%u\n",
+ ret, port_id);
+
+ rte_eth_promiscuous_enable(port_id);
+
+ printf("Port %u,MAC address: %02X:%02X:%02X:%02X:%02X:%02X\n\n",
+ port_id,
+ rsrc->eth_addr[port_id].addr_bytes[0],
+ rsrc->eth_addr[port_id].addr_bytes[1],
+ rsrc->eth_addr[port_id].addr_bytes[2],
+ rsrc->eth_addr[port_id].addr_bytes[3],
+ rsrc->eth_addr[port_id].addr_bytes[4],
+ rsrc->eth_addr[port_id].addr_bytes[5]);
+ }
+
+ return nb_ports_available;
+}
diff --git a/examples/l2fwd-event/l2fwd_common.h b/examples/l2fwd-event/l2fwd_common.h
new file mode 100644
index 000000000..7b74f92b3
--- /dev/null
+++ b/examples/l2fwd-event/l2fwd_common.h
@@ -0,0 +1,127 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef __L2FWD_COMMON_H__
+#define __L2FWD_COMMON_H__
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <sys/queue.h>
+#include <netinet/in.h>
+#include <setjmp.h>
+#include <stdarg.h>
+#include <ctype.h>
+#include <errno.h>
+#include <getopt.h>
+#include <signal.h>
+#include <stdbool.h>
+
+#include <rte_common.h>
+#include <rte_malloc.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_eal.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_prefetch.h>
+#include <rte_lcore.h>
+#include <rte_per_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_interrupts.h>
+#include <rte_random.h>
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_eventdev.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_spinlock.h>
+
+#define MAX_PKT_BURST 32
+#define MAX_RX_QUEUE_PER_LCORE 16
+#define MAX_TX_QUEUE_PER_PORT 16
+
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 1024
+
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+#define MEMPOOL_CACHE_SIZE 256
+
+#define DEFAULT_TIMER_PERIOD 10 /* default period is 10 seconds */
+#define MAX_TIMER_PERIOD 86400 /* 1 day max */
+
+/* Per-port statistics struct */
+struct l2fwd_port_statistics {
+ uint64_t dropped;
+ uint64_t tx;
+ uint64_t rx;
+} __rte_cache_aligned;
+
+struct l2fwd_resources {
+ volatile uint8_t force_quit;
+ uint8_t mac_updating;
+ uint8_t rx_queue_per_lcore;
+ uint16_t nb_rxd;
+ uint16_t nb_txd;
+ uint32_t enabled_port_mask;
+ uint64_t timer_period;
+ struct rte_mempool *pktmbuf_pool;
+ uint32_t dst_ports[RTE_MAX_ETHPORTS];
+ struct rte_ether_addr eth_addr[RTE_MAX_ETHPORTS];
+ struct l2fwd_port_statistics port_stats[RTE_MAX_ETHPORTS];
+ void *poll_rsrc;
+} __rte_cache_aligned;
+
+static __rte_always_inline void
+l2fwd_mac_updating(struct rte_mbuf *m, uint32_t dest_port_id,
+ struct rte_ether_addr *addr)
+{
+ struct rte_ether_hdr *eth;
+ void *tmp;
+
+ eth = rte_pktmbuf_mtod(m, struct rte_ether_hdr *);
+
+ /* 02:00:00:00:00:xx */
+ tmp = ð->d_addr.addr_bytes[0];
+ *((uint64_t *)tmp) = 0x000000000002 + ((uint64_t)dest_port_id << 40);
+
+ /* src addr */
+ rte_ether_addr_copy(addr, ð->s_addr);
+}
+
+static __rte_always_inline struct l2fwd_resources *
+l2fwd_get_rsrc(void)
+{
+ static const char name[RTE_MEMZONE_NAMESIZE] = "rsrc";
+ const struct rte_memzone *mz;
+
+ mz = rte_memzone_lookup(name);
+ if (mz != NULL)
+ return mz->addr;
+
+ mz = rte_memzone_reserve(name, sizeof(struct l2fwd_resources), 0, 0);
+ if (mz != NULL) {
+ struct l2fwd_resources *rsrc = mz->addr;
+
+ memset(rsrc, 0, sizeof(struct l2fwd_resources));
+ rsrc->mac_updating = true;
+ rsrc->rx_queue_per_lcore = 1;
+ rsrc->timer_period = 10 * rte_get_timer_hz();
+
+ return mz->addr;
+ }
+
+ rte_panic("Unable to allocate memory for l2fwd resources\n");
+
+ return NULL;
+}
+
+int l2fwd_event_init_ports(struct l2fwd_resources *rsrc);
+
+#endif /* __L2FWD_COMMON_H__ */
diff --git a/examples/l2fwd-event/l2fwd_poll.c b/examples/l2fwd-event/l2fwd_poll.c
new file mode 100644
index 000000000..cc96b14cb
--- /dev/null
+++ b/examples/l2fwd-event/l2fwd_poll.c
@@ -0,0 +1,177 @@
+#include "l2fwd_poll.h"
+
+static inline void
+l2fwd_poll_simple_forward(struct l2fwd_resources *rsrc, struct rte_mbuf *m,
+ uint32_t portid)
+{
+ struct rte_eth_dev_tx_buffer *buffer;
+ uint32_t dst_port;
+ int sent;
+
+ dst_port = rsrc->dst_ports[portid];
+
+ if (rsrc->mac_updating)
+ l2fwd_mac_updating(m, dst_port, &rsrc->eth_addr[dst_port]);
+
+ buffer = ((struct l2fwd_poll_resources *)rsrc->poll_rsrc)->tx_buffer[
+ dst_port];
+ sent = rte_eth_tx_buffer(dst_port, 0, buffer, m);
+ if (sent)
+ rsrc->port_stats[dst_port].tx += sent;
+}
+
+/* main poll mode processing loop */
+static void
+l2fwd_poll_main_loop(struct l2fwd_resources *rsrc)
+{
+ uint64_t prev_tsc, diff_tsc, cur_tsc, drain_tsc;
+ struct l2fwd_poll_resources *poll_rsrc = rsrc->poll_rsrc;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct rte_eth_dev_tx_buffer *buf;
+ struct lcore_queue_conf *qconf;
+ uint32_t i, j, port_id, nb_rx;
+ struct rte_mbuf *m;
+ uint32_t lcore_id;
+ int32_t sent;
+
+ drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S *
+ BURST_TX_DRAIN_US;
+ prev_tsc = 0;
+
+ lcore_id = rte_lcore_id();
+ qconf = &poll_rsrc->lcore_queue_conf[lcore_id];
+
+ if (qconf->n_rx_port == 0) {
+ printf("lcore %u has nothing to do\n", lcore_id);
+ return;
+ }
+
+ printf("entering main loop on lcore %u\n", lcore_id);
+
+ for (i = 0; i < qconf->n_rx_port; i++) {
+
+ port_id = qconf->rx_port_list[i];
+ printf(" -- lcoreid=%u port_id=%u\n", lcore_id, port_id);
+
+ }
+
+ while (!rsrc->force_quit) {
+
+ cur_tsc = rte_rdtsc();
+
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+ for (i = 0; i < qconf->n_rx_port; i++) {
+ port_id =
+ rsrc->dst_ports[qconf->rx_port_list[i]];
+ buf = poll_rsrc->tx_buffer[port_id];
+ sent = rte_eth_tx_buffer_flush(port_id, 0, buf);
+ if (sent)
+ rsrc->port_stats[port_id].tx += sent;
+ }
+
+ prev_tsc = cur_tsc;
+ }
+
+ /*
+ * Read packet from RX queues
+ */
+ for (i = 0; i < qconf->n_rx_port; i++) {
+
+ port_id = qconf->rx_port_list[i];
+ nb_rx = rte_eth_rx_burst(port_id, 0, pkts_burst,
+ MAX_PKT_BURST);
+
+ rsrc->port_stats[port_id].rx += nb_rx;
+
+ for (j = 0; j < nb_rx; j++) {
+ m = pkts_burst[j];
+ rte_prefetch0(rte_pktmbuf_mtod(m, void *));
+ l2fwd_poll_simple_forward(rsrc, m, port_id);
+ }
+ }
+ }
+}
+
+static void
+l2fwd_poll_lcore_config(struct l2fwd_resources *rsrc)
+{
+ struct l2fwd_poll_resources *poll_rsrc = rsrc->poll_rsrc;
+ struct lcore_queue_conf *qconf = NULL;
+ uint32_t rx_lcore_id = 0;
+ uint16_t port_id;
+
+ /* Initialize the port/queue configuration of each logical core */
+ RTE_ETH_FOREACH_DEV(port_id) {
+ /* skip ports that are not enabled */
+ if ((rsrc->enabled_port_mask & (1 << port_id)) == 0)
+ continue;
+
+ /* get the lcore_id for this port */
+ while (rte_lcore_is_enabled(rx_lcore_id) == 0 ||
+ poll_rsrc->lcore_queue_conf[rx_lcore_id].n_rx_port ==
+ rsrc->rx_queue_per_lcore) {
+ rx_lcore_id++;
+ if (rx_lcore_id >= RTE_MAX_LCORE)
+ rte_panic("Not enough cores\n");
+ }
+
+ if (qconf != &poll_rsrc->lcore_queue_conf[rx_lcore_id]) {
+ /* Assigned a new logical core in the loop above. */
+ qconf = &poll_rsrc->lcore_queue_conf[rx_lcore_id];
+ }
+
+ qconf->rx_port_list[qconf->n_rx_port] = port_id;
+ qconf->n_rx_port++;
+ printf("Lcore %u: RX port %u\n", rx_lcore_id, port_id);
+ }
+}
+
+static void
+l2fwd_poll_init_tx_buffers(struct l2fwd_resources *rsrc)
+{
+ struct l2fwd_poll_resources *poll_rsrc = rsrc->poll_rsrc;
+ uint16_t port_id;
+ int ret;
+
+ RTE_ETH_FOREACH_DEV(port_id) {
+ /* Initialize TX buffers */
+ poll_rsrc->tx_buffer[port_id] = rte_zmalloc_socket("tx_buffer",
+ RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
+ rte_eth_dev_socket_id(port_id));
+ if (poll_rsrc->tx_buffer[port_id] == NULL)
+ rte_panic("Cannot allocate buffer for tx on port %u\n",
+ port_id);
+
+ rte_eth_tx_buffer_init(poll_rsrc->tx_buffer[port_id],
+ MAX_PKT_BURST);
+
+ ret = rte_eth_tx_buffer_set_err_callback(
+ poll_rsrc->tx_buffer[port_id],
+ rte_eth_tx_buffer_count_callback,
+ &rsrc->port_stats[port_id].dropped);
+ if (ret < 0)
+ rte_panic("Cannot set error callback for tx buffer on port %u\n",
+ port_id);
+ }
+}
+
+void
+l2fwd_poll_resource_setup(struct l2fwd_resources *rsrc)
+{
+ struct l2fwd_poll_resources *poll_rsrc;
+
+ poll_rsrc = rte_zmalloc("l2fwd_poll_rsrc",
+ sizeof(struct l2fwd_poll_resources), 0);
+ if (poll_rsrc == NULL)
+ rte_panic("Failed to allocate resources for l2fwd poll mode\n");
+
+ rsrc->poll_rsrc = poll_rsrc;
+ l2fwd_poll_lcore_config(rsrc);
+ l2fwd_poll_init_tx_buffers(rsrc);
+
+ poll_rsrc->poll_main_loop = l2fwd_poll_main_loop;
+}
diff --git a/examples/l2fwd-event/l2fwd_poll.h b/examples/l2fwd-event/l2fwd_poll.h
new file mode 100644
index 000000000..d59b0c844
--- /dev/null
+++ b/examples/l2fwd-event/l2fwd_poll.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#ifndef __L2FWD_POLL_H__
+#define __L2FWD_POLL_H__
+
+#include "l2fwd_common.h"
+
+typedef void (*poll_main_loop_cb)(struct l2fwd_resources *rsrc);
+
+struct lcore_queue_conf {
+ uint32_t rx_port_list[MAX_RX_QUEUE_PER_LCORE];
+ uint32_t n_rx_port;
+} __rte_cache_aligned;
+
+struct l2fwd_poll_resources {
+ poll_main_loop_cb poll_main_loop;
+ struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
+ struct lcore_queue_conf lcore_queue_conf[RTE_MAX_LCORE];
+};
+
+void l2fwd_poll_resource_setup(struct l2fwd_resources *rsrc);
+
+#endif
diff --git a/examples/l2fwd-event/main.c b/examples/l2fwd-event/main.c
new file mode 100644
index 000000000..a4e41ddb4
--- /dev/null
+++ b/examples/l2fwd-event/main.c
@@ -0,0 +1,446 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2019 Marvell International Ltd.
+ */
+
+#include "l2fwd_poll.h"
+
+/* display usage */
+static void
+l2fwd_event_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- -p PORTMASK [-q NQ]\n"
+ " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
+ " -q NQ: number of queue (=ports) per lcore (default is 1)\n"
+ " -T PERIOD: statistics will be refreshed each PERIOD seconds "
+ " (0 to disable, 10 default, 86400 maximum)\n"
+ " --[no-]mac-updating: Enable or disable MAC addresses updating (enabled by default)\n"
+ " When enabled:\n"
+ " - The source MAC address is replaced by the TX port MAC address\n"
+ " - The destination MAC address is replaced by 02:00:00:00:00:TX_PORT_ID\n",
+ prgname);
+}
+
+static int
+l2fwd_event_parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+}
+
+static unsigned int
+l2fwd_event_parse_nqueue(const char *q_arg)
+{
+ char *end = NULL;
+ unsigned long n;
+
+ /* parse hexadecimal string */
+ n = strtoul(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return 0;
+ if (n == 0)
+ return 0;
+ if (n >= MAX_RX_QUEUE_PER_LCORE)
+ return 0;
+
+ return n;
+}
+
+static int
+l2fwd_event_parse_timer_period(const char *q_arg)
+{
+ char *end = NULL;
+ int n;
+
+ /* parse number string */
+ n = strtol(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+ if (n >= MAX_TIMER_PERIOD)
+ return -1;
+
+ return n;
+}
+
+static const char short_options[] =
+ "p:" /* portmask */
+ "q:" /* number of queues */
+ "T:" /* timer period */
+ ;
+
+#define CMD_LINE_OPT_MAC_UPDATING "mac-updating"
+#define CMD_LINE_OPT_NO_MAC_UPDATING "no-mac-updating"
+
+enum {
+ /* long options mapped to a short option */
+
+ /* first long only option value must be >= 256, so that we won't
+ * conflict with short options
+ */
+ CMD_LINE_OPT_MIN_NUM = 256,
+};
+
+/* Parse the argument given in the command line of the application */
+static int
+l2fwd_event_parse_args(int argc, char **argv,
+ struct l2fwd_resources *rsrc)
+{
+ int mac_updating = 1;
+ struct option lgopts[] = {
+ { CMD_LINE_OPT_MAC_UPDATING, no_argument, &mac_updating, 1},
+ { CMD_LINE_OPT_NO_MAC_UPDATING, no_argument, &mac_updating, 0},
+ {NULL, 0, 0, 0}
+ };
+ int opt, ret, timer_secs;
+ char *prgname = argv[0];
+ char **argvopt;
+ int option_index;
+
+ argvopt = argv;
+ while ((opt = getopt_long(argc, argvopt, short_options,
+ lgopts, &option_index)) != EOF) {
+
+ switch (opt) {
+ /* portmask */
+ case 'p':
+ rsrc->enabled_port_mask =
+ l2fwd_event_parse_portmask(optarg);
+ if (rsrc->enabled_port_mask == 0) {
+ printf("invalid portmask\n");
+ l2fwd_event_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* nqueue */
+ case 'q':
+ rsrc->rx_queue_per_lcore =
+ l2fwd_event_parse_nqueue(optarg);
+ if (rsrc->rx_queue_per_lcore == 0) {
+ printf("invalid queue number\n");
+ l2fwd_event_usage(prgname);
+ return -1;
+ }
+ break;
+
+ /* timer period */
+ case 'T':
+ timer_secs = l2fwd_event_parse_timer_period(optarg);
+ if (timer_secs < 0) {
+ printf("invalid timer period\n");
+ l2fwd_event_usage(prgname);
+ return -1;
+ }
+ rsrc->timer_period = timer_secs;
+ /* convert to number of cycles */
+ rsrc->timer_period *= rte_get_timer_hz();
+ break;
+
+ /* long options */
+ case 0:
+ break;
+
+ default:
+ l2fwd_event_usage(prgname);
+ return -1;
+ }
+ }
+
+ rsrc->mac_updating = mac_updating;
+
+ if (optind >= 0)
+ argv[optind-1] = prgname;
+
+ ret = optind-1;
+ optind = 1; /* reset getopt lib */
+ return ret;
+}
+
+static int
+l2fwd_launch_one_lcore(void *args)
+{
+ struct l2fwd_resources *rsrc = args;
+ struct l2fwd_poll_resources *poll_rsrc = rsrc->poll_rsrc;
+
+ poll_rsrc->poll_main_loop(rsrc);
+
+ return 0;
+}
+
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(struct l2fwd_resources *rsrc,
+ uint32_t port_mask)
+{
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+ uint16_t port_id;
+ uint8_t count, all_ports_up, print_flag = 0;
+ struct rte_eth_link link;
+
+ printf("\nChecking link status...");
+ fflush(stdout);
+ for (count = 0; count <= MAX_CHECK_TIME; count++) {
+ if (rsrc->force_quit)
+ return;
+ all_ports_up = 1;
+ RTE_ETH_FOREACH_DEV(port_id) {
+ if (rsrc->force_quit)
+ return;
+ if ((port_mask & (1 << port_id)) == 0)
+ continue;
+ memset(&link, 0, sizeof(link));
+ rte_eth_link_get_nowait(port_id, &link);
+ /* print link status if flag set */
+ if (print_flag == 1) {
+ if (link.link_status)
+ printf(
+ "Port%d Link Up. Speed %u Mbps - %s\n",
+ port_id, link.link_speed,
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ ("full-duplex") : ("half-duplex\n"));
+ else
+ printf("Port %d Link Down\n", port_id);
+ continue;
+ }
+ /* clear all_ports_up flag if any link down */
+ if (link.link_status == ETH_LINK_DOWN) {
+ all_ports_up = 0;
+ break;
+ }
+ }
+ /* after finally printing all link status, get out */
+ if (print_flag == 1)
+ break;
+
+ if (all_ports_up == 0) {
+ printf(".");
+ fflush(stdout);
+ rte_delay_ms(CHECK_INTERVAL);
+ }
+
+ /* set the print_flag if all ports up or timeout */
+ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+ print_flag = 1;
+ printf("done\n");
+ }
+ }
+}
+
+/* Print out statistics on packets dropped */
+static void
+print_stats(struct l2fwd_resources *rsrc)
+{
+ uint64_t total_packets_dropped, total_packets_tx, total_packets_rx;
+ uint32_t port_id;
+
+ total_packets_dropped = 0;
+ total_packets_tx = 0;
+ total_packets_rx = 0;
+
+ const char clr[] = {27, '[', '2', 'J', '\0' };
+ const char topLeft[] = {27, '[', '1', ';', '1', 'H', '\0' };
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, topLeft);
+
+ printf("\nPort statistics ====================================");
+
+ for (port_id = 0; port_id < RTE_MAX_ETHPORTS; port_id++) {
+ /* skip disabled ports */
+ if ((rsrc->enabled_port_mask & (1 << port_id)) == 0)
+ continue;
+ printf("\nStatistics for port %u ------------------------------"
+ "\nPackets sent: %24"PRIu64
+ "\nPackets received: %20"PRIu64
+ "\nPackets dropped: %21"PRIu64,
+ port_id,
+ rsrc->port_stats[port_id].tx,
+ rsrc->port_stats[port_id].rx,
+ rsrc->port_stats[port_id].dropped);
+
+ total_packets_dropped +=
+ rsrc->port_stats[port_id].dropped;
+ total_packets_tx += rsrc->port_stats[port_id].tx;
+ total_packets_rx += rsrc->port_stats[port_id].rx;
+ }
+ printf("\nAggregate statistics ==============================="
+ "\nTotal packets sent: %18"PRIu64
+ "\nTotal packets received: %14"PRIu64
+ "\nTotal packets dropped: %15"PRIu64,
+ total_packets_tx,
+ total_packets_rx,
+ total_packets_dropped);
+ printf("\n====================================================\n");
+}
+
+static void
+l2fwd_event_print_stats(struct l2fwd_resources *rsrc)
+{
+ uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
+ const uint64_t timer_period = rsrc->timer_period;
+
+ while (!rsrc->force_quit) {
+ /* if timer is enabled */
+ if (timer_period > 0) {
+ cur_tsc = rte_rdtsc();
+ diff_tsc = cur_tsc - prev_tsc;
+
+ /* advance the timer */
+ timer_tsc += diff_tsc;
+
+ /* if timer has reached its timeout */
+ if (unlikely(timer_tsc >= timer_period)) {
+ print_stats(rsrc);
+ /* reset the timer */
+ timer_tsc = 0;
+ }
+ prev_tsc = cur_tsc;
+ }
+ }
+}
+
+
+static void
+signal_handler(int signum)
+{
+ struct l2fwd_resources *rsrc = l2fwd_get_rsrc();
+ if (signum == SIGINT || signum == SIGTERM) {
+ printf("\n\nSignal %d received, preparing to exit...\n",
+ signum);
+ rsrc->force_quit = true;
+ }
+}
+
+int
+main(int argc, char **argv)
+{
+ struct l2fwd_resources *rsrc;
+ uint16_t nb_ports_available = 0;
+ uint32_t nb_ports_in_mask = 0;
+ uint16_t port_id, last_port;
+ uint32_t nb_mbufs;
+ uint16_t nb_ports;
+ int ret;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_panic("Invalid EAL arguments\n");
+ argc -= ret;
+ argv += ret;
+
+ rsrc = l2fwd_get_rsrc();
+
+ signal(SIGINT, signal_handler);
+ signal(SIGTERM, signal_handler);
+
+ /* parse application arguments (after the EAL ones) */
+ ret = l2fwd_event_parse_args(argc, argv, rsrc);
+ if (ret < 0)
+ rte_panic("Invalid L2FWD arguments\n");
+
+ printf("MAC updating %s\n", rsrc->mac_updating ? "enabled" :
+ "disabled");
+
+ nb_ports = rte_eth_dev_count_avail();
+ if (nb_ports == 0)
+ rte_panic("No Ethernet ports - bye\n");
+
+ /* check port mask to possible port mask */
+ if (rsrc->enabled_port_mask & ~((1 << nb_ports) - 1))
+ rte_panic("Invalid portmask; possible (0x%x)\n",
+ (1 << nb_ports) - 1);
+
+ /* reset l2fwd_dst_ports */
+ for (port_id = 0; port_id < RTE_MAX_ETHPORTS; port_id++)
+ rsrc->dst_ports[port_id] = 0;
+ last_port = 0;
+
+ /*
+ * Each logical core is assigned a dedicated TX queue on each port.
+ */
+ RTE_ETH_FOREACH_DEV(port_id) {
+ /* skip ports that are not enabled */
+ if ((rsrc->enabled_port_mask & (1 << port_id)) == 0)
+ continue;
+
+ if (nb_ports_in_mask % 2) {
+ rsrc->dst_ports[port_id] = last_port;
+ rsrc->dst_ports[last_port] = port_id;
+ } else {
+ last_port = port_id;
+ }
+
+ nb_ports_in_mask++;
+ }
+ if (nb_ports_in_mask % 2) {
+ printf("Notice: odd number of ports in portmask.\n");
+ rsrc->dst_ports[last_port] = last_port;
+ }
+
+ nb_mbufs = RTE_MAX(nb_ports * (RTE_TEST_RX_DESC_DEFAULT +
+ RTE_TEST_TX_DESC_DEFAULT +
+ MAX_PKT_BURST + rte_lcore_count() *
+ MEMPOOL_CACHE_SIZE), 8192U);
+
+ /* create the mbuf pool */
+ rsrc->pktmbuf_pool = rte_pktmbuf_pool_create("mbuf_pool",
+ nb_mbufs, MEMPOOL_CACHE_SIZE, 0,
+ RTE_MBUF_DEFAULT_BUF_SIZE, rte_socket_id());
+ if (rsrc->pktmbuf_pool == NULL)
+ rte_panic("Cannot init mbuf pool\n");
+
+ nb_ports_available = l2fwd_event_init_ports(rsrc);
+ if (!nb_ports_available)
+ rte_panic("All available ports are disabled. Please set portmask.\n");
+
+ l2fwd_poll_resource_setup(rsrc);
+
+ /* initialize port stats */
+ memset(&rsrc->port_stats, 0,
+ sizeof(struct l2fwd_port_statistics));
+
+ /* All settings are done. Now enable eth devices */
+ RTE_ETH_FOREACH_DEV(port_id) {
+ /* skip ports that are not enabled */
+ if ((rsrc->enabled_port_mask &
+ (1 << port_id)) == 0)
+ continue;
+
+ ret = rte_eth_dev_start(port_id);
+ if (ret < 0)
+ rte_panic("rte_eth_dev_start:err=%d, port=%u\n", ret,
+ port_id);
+ }
+
+ check_all_ports_link_status(rsrc, rsrc->enabled_port_mask);
+
+ /* launch per-lcore init on every lcore */
+ rte_eal_mp_remote_launch(l2fwd_launch_one_lcore, rsrc,
+ SKIP_MASTER);
+ l2fwd_event_print_stats(rsrc);
+ rte_eal_mp_wait_lcore();
+
+ RTE_ETH_FOREACH_DEV(port_id) {
+ if ((rsrc->enabled_port_mask &
+ (1 << port_id)) == 0)
+ continue;
+ printf("Closing port %d...", port_id);
+ rte_eth_dev_stop(port_id);
+ rte_eth_dev_close(port_id);
+ printf(" Done\n");
+ }
+ printf("Bye...\n");
+
+ return 0;
+}
diff --git a/examples/l2fwd-event/meson.build b/examples/l2fwd-event/meson.build
new file mode 100644
index 000000000..c936aa72e
--- /dev/null
+++ b/examples/l2fwd-event/meson.build
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(C) 2019 Marvell International Ltd.
+#
+
+# meson file, for building this example as part of a main DPDK build.
+#
+# To build this example as a standalone application with an already-installed
+# DPDK instance, use 'make'
+
+deps += 'eventdev'
+sources = files(
+ 'main.c',
+ 'l2fwd_poll.c',
+ 'l2fwd_common.c',
+)
diff --git a/examples/meson.build b/examples/meson.build
index 98ae50a49..9d468706d 100644
--- a/examples/meson.build
+++ b/examples/meson.build
@@ -20,7 +20,7 @@ all_examples = [
'ip_fragmentation', 'ip_pipeline',
'ip_reassembly', 'ipsec-secgw',
'ipv4_multicast', 'kni',
- 'l2fwd', 'l2fwd-cat',
+ 'l2fwd', 'l2fwd-cat', 'l2fwd-event',
'l2fwd-crypto', 'l2fwd-jobstats',
'l2fwd-keepalive', 'l3fwd',
'l3fwd-acl', 'l3fwd-power',
--
2.17.1
next prev parent reply other threads:[~2019-10-30 16:27 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-30 16:26 [dpdk-dev] [PATCH v8 00/10] example/l2fwd-event: introduce l2fwd-event example pbhagavatula
2019-10-30 16:26 ` pbhagavatula [this message]
2019-10-30 16:26 ` [dpdk-dev] [PATCH v8 02/10] examples/l2fwd-event: add infra for eventdev pbhagavatula
2019-10-30 16:26 ` [dpdk-dev] [PATCH v8 03/10] examples/l2fwd-event: add infra to split eventdev framework pbhagavatula
2019-10-30 16:26 ` [dpdk-dev] [PATCH v8 04/10] examples/l2fwd-event: add event device setup pbhagavatula
2019-10-30 16:26 ` [dpdk-dev] [PATCH v8 05/10] examples/l2fwd-event: add eventdev queue and port setup pbhagavatula
2019-10-30 16:26 ` [dpdk-dev] [PATCH v8 06/10] examples/l2fwd-event: add event Rx/Tx adapter setup pbhagavatula
2019-10-30 16:26 ` [dpdk-dev] [PATCH v8 07/10] examples/l2fwd-event: add service core setup pbhagavatula
2019-10-30 16:26 ` [dpdk-dev] [PATCH v8 08/10] examples/l2fwd-event: add eventdev main loop pbhagavatula
2019-10-30 16:26 ` [dpdk-dev] [PATCH v8 09/10] examples/l2fwd-event: add graceful teardown pbhagavatula
2019-10-30 17:03 ` [dpdk-dev] [PATCH v8 10/10] doc: add application usage guide for l2fwd-event pbhagavatula
2019-10-30 18:17 ` [dpdk-dev] [PATCH v8 00/10] example/l2fwd-event: introduce l2fwd-event example Jerin Jacob
2019-11-04 17:11 ` Jerin Jacob
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191030162651.3001-2-pbhagavatula@marvell.com \
--to=pbhagavatula@marvell.com \
--cc=akhil.goyal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=marko.kovacevic@intel.com \
--cc=orika@mellanox.com \
--cc=radu.nicolau@intel.com \
--cc=skori@marvell.com \
--cc=thomas@monjalon.net \
--cc=tomasz.kantecki@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).