From: Ye Xiaolong <xiaolong.ye@intel.com>
To: taox.zhu@intel.com
Cc: qiming.yang@intel.com, wenzhuo.lu@intel.com, dev@dpdk.org
Subject: Re: [dpdk-dev] [DPDK] net/ice: set vlan tpid is not supported by ice
Date: Fri, 8 Nov 2019 14:55:10 +0800 [thread overview]
Message-ID: <20191108065510.GC34994@intel.com> (raw)
In-Reply-To: <20191031102923.70585-1-taox.zhu@intel.com>
On 10/31, taox.zhu@intel.com wrote:
>From: Zhu Tao <taox.zhu@intel.com>
>
>Set vlan tpid is not supported by ice hardware. Delete driver code
>that doesn't work.
>
>Signed-off-by: Zhu Tao <taox.zhu@intel.com>
>---
> drivers/net/ice/ice_ethdev.c | 54 ------------------------------------
> 1 file changed, 54 deletions(-)
>
>diff --git a/drivers/net/ice/ice_ethdev.c b/drivers/net/ice/ice_ethdev.c
>index d74675842..ec0234091 100644
>--- a/drivers/net/ice/ice_ethdev.c
>+++ b/drivers/net/ice/ice_ethdev.c
>@@ -69,9 +69,6 @@ static int ice_dev_set_link_down(struct rte_eth_dev *dev);
>
> static int ice_mtu_set(struct rte_eth_dev *dev, uint16_t mtu);
> static int ice_vlan_offload_set(struct rte_eth_dev *dev, int mask);
>-static int ice_vlan_tpid_set(struct rte_eth_dev *dev,
>- enum rte_vlan_type vlan_type,
>- uint16_t tpid);
> static int ice_rss_reta_update(struct rte_eth_dev *dev,
> struct rte_eth_rss_reta_entry64 *reta_conf,
> uint16_t reta_size);
>@@ -156,7 +153,6 @@ static const struct eth_dev_ops ice_eth_dev_ops = {
> .mac_addr_remove = ice_macaddr_remove,
> .vlan_filter_set = ice_vlan_filter_set,
> .vlan_offload_set = ice_vlan_offload_set,
>- .vlan_tpid_set = ice_vlan_tpid_set,
> .reta_update = ice_rss_reta_update,
> .reta_query = ice_rss_reta_query,
> .rss_hash_update = ice_rss_hash_update,
>@@ -3340,56 +3336,6 @@ ice_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> return 0;
> }
>
>-static int
>-ice_vlan_tpid_set(struct rte_eth_dev *dev,
>- enum rte_vlan_type vlan_type,
>- uint16_t tpid)
>-{
>- struct ice_hw *hw = ICE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
>- uint64_t reg_r = 0, reg_w = 0;
>- uint16_t reg_id = 0;
>- int ret = 0;
>- int qinq = dev->data->dev_conf.rxmode.offloads &
>- DEV_RX_OFFLOAD_VLAN_EXTEND;
>-
>- switch (vlan_type) {
>- case ETH_VLAN_TYPE_OUTER:
>- if (qinq)
>- reg_id = 3;
>- else
>- reg_id = 5;
>- break;
>- case ETH_VLAN_TYPE_INNER:
>- if (qinq) {
>- reg_id = 5;
>- } else {
>- PMD_DRV_LOG(ERR,
>- "Unsupported vlan type in single vlan.");
>- return -EINVAL;
>- }
>- break;
>- default:
>- PMD_DRV_LOG(ERR, "Unsupported vlan type %d", vlan_type);
>- return -EINVAL;
>- }
>- reg_r = ICE_READ_REG(hw, GL_SWT_L2TAGCTRL(reg_id));
>- PMD_DRV_LOG(DEBUG, "Debug read from ICE GL_SWT_L2TAGCTRL[%d]: "
>- "0x%08"PRIx64"", reg_id, reg_r);
>-
>- reg_w = reg_r & (~(GL_SWT_L2TAGCTRL_ETHERTYPE_M));
>- reg_w |= ((uint64_t)tpid << GL_SWT_L2TAGCTRL_ETHERTYPE_S);
>- if (reg_r == reg_w) {
>- PMD_DRV_LOG(DEBUG, "No need to write");
>- return 0;
>- }
>-
>- ICE_WRITE_REG(hw, GL_SWT_L2TAGCTRL(reg_id), reg_w);
>- PMD_DRV_LOG(DEBUG, "Debug write 0x%08"PRIx64" to "
>- "ICE GL_SWT_L2TAGCTRL[%d]", reg_w, reg_id);
>-
>- return ret;
>-}
>-
> static int
> ice_get_rss_lut(struct ice_vsi *vsi, uint8_t *lut, uint16_t lut_size)
> {
>--
>2.17.1
>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Applied to dpdk-next-net-intel. Thanks.
prev parent reply other threads:[~2019-11-08 6:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-31 10:29 taox.zhu
2019-11-04 3:30 ` Yang, Qiming
2019-11-08 6:55 ` Ye Xiaolong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191108065510.GC34994@intel.com \
--to=xiaolong.ye@intel.com \
--cc=dev@dpdk.org \
--cc=qiming.yang@intel.com \
--cc=taox.zhu@intel.com \
--cc=wenzhuo.lu@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).