DPDK patches and discussions
 help / color / mirror / Atom feed
From: Selwin Sebastian <Selwin.Sebastian@amd.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, thomas@monjalon.net,
	david.marchand@redhat.com,
	Selwin Sebastian <Selwin.Sebastian@amd.com>
Subject: [dpdk-dev] [PATCH v3] drivers: add a HW quirk for register definitions
Date: Tue, 14 Jan 2020 23:00:19 +0530	[thread overview]
Message-ID: <20200114173019.14097-1-Selwin.Sebastian@amd.com> (raw)

V1000/R1000 processors are using the same PCI ids for the network
device as SNOWYOWL processor but has altered register definitions
for determining the window settings for the indirect PCS access.
Add support to check for this hardware and if found use the new
register values.

Added a new routine rte_pci_search_device to pci driver to search
for a device.

Signed-off-by: Selwin Sebastian <Selwin.Sebastian@amd.com>
---
 drivers/bus/pci/pci_common.c     | 17 +++++++++++++++++
 drivers/bus/pci/rte_bus_pci.h    | 12 ++++++++++++
 drivers/net/axgbe/axgbe_common.h |  2 ++
 drivers/net/axgbe/axgbe_ethdev.c | 18 +++++++++++++++---
 4 files changed, 46 insertions(+), 3 deletions(-)

diff --git a/drivers/bus/pci/pci_common.c b/drivers/bus/pci/pci_common.c
index 3f5542076..e991a2580 100644
--- a/drivers/bus/pci/pci_common.c
+++ b/drivers/bus/pci/pci_common.c
@@ -393,6 +393,23 @@ rte_pci_add_device(struct rte_pci_device *pci_dev)
 	TAILQ_INSERT_TAIL(&rte_pci_bus.device_list, pci_dev, next);
 }
 
+/* Search for a specific device in PCI bus */
+
+int
+rte_pci_search_device(int vendor_id, int device_id)
+{
+	struct rte_pci_device *pdev;
+	pdev = TAILQ_FIRST(&rte_pci_bus.device_list);
+
+	while (pdev != NULL) {
+		if (pdev->id.vendor_id == vendor_id &&
+			pdev->id.device_id == device_id)
+			return true;
+		pdev = TAILQ_NEXT(pdev, next);
+	}
+	return false;
+}
+
 /* Insert a device into a predefined position in PCI bus */
 void
 rte_pci_insert_device(struct rte_pci_device *exist_pci_dev,
diff --git a/drivers/bus/pci/rte_bus_pci.h b/drivers/bus/pci/rte_bus_pci.h
index 29bea6d70..42b6c7e03 100644
--- a/drivers/bus/pci/rte_bus_pci.h
+++ b/drivers/bus/pci/rte_bus_pci.h
@@ -354,6 +354,18 @@ void rte_pci_ioport_read(struct rte_pci_ioport *p,
 void rte_pci_ioport_write(struct rte_pci_ioport *p,
 		const void *data, size_t len, off_t offset);
 
+/*
+ * Search for a specific device in pci bus
+ *
+ * @param vendor_id
+ *   vendor_id of the device to search
+ * @param device_id
+ *   device_id of the device to search
+ * @return
+ *   1 on success, 0 on failure
+ */
+int rte_pci_search_device(int vendor_id, int device_id);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/drivers/net/axgbe/axgbe_common.h b/drivers/net/axgbe/axgbe_common.h
index 34f60f156..4a3fbac16 100644
--- a/drivers/net/axgbe/axgbe_common.h
+++ b/drivers/net/axgbe/axgbe_common.h
@@ -841,6 +841,8 @@
 #define PCS_V1_WINDOW_SELECT		0x03fc
 #define PCS_V2_WINDOW_DEF		0x9060
 #define PCS_V2_WINDOW_SELECT		0x9064
+#define PCS_V2_RV_WINDOW_DEF		0x1060
+#define PCS_V2_RV_WINDOW_SELECT		0x1064
 
 /* PCS register entry bit positions and sizes */
 #define PCS_V2_WINDOW_DEF_OFFSET_INDEX	6
diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index d1f160e79..01975236b 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -29,6 +29,7 @@ static int  axgbe_dev_info_get(struct rte_eth_dev *dev,
 
 /* The set of PCI devices this driver supports */
 #define AMD_PCI_VENDOR_ID       0x1022
+#define AMD_PCI_RV_ROOT_COMPLEX_ID	0x15d0
 #define AMD_PCI_AXGBE_DEVICE_V2A 0x1458
 #define AMD_PCI_AXGBE_DEVICE_V2B 0x1459
 
@@ -605,6 +606,18 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev)
 	pci_dev = RTE_DEV_TO_PCI(eth_dev->device);
 	pdata->pci_dev = pci_dev;
 
+	/*
+	 * Use root complex device ID to differentiate RV AXGBE vs SNOWY AXGBE
+	 */
+	if (rte_pci_search_device(AMD_PCI_VENDOR_ID,
+				AMD_PCI_RV_ROOT_COMPLEX_ID)) {
+			pdata->xpcs_window_def_reg = PCS_V2_RV_WINDOW_DEF;
+			pdata->xpcs_window_sel_reg = PCS_V2_RV_WINDOW_SELECT;
+	} else {
+		pdata->xpcs_window_def_reg = PCS_V2_WINDOW_DEF;
+		pdata->xpcs_window_sel_reg = PCS_V2_WINDOW_SELECT;
+	}
+
 	pdata->xgmac_regs =
 		(void *)pci_dev->mem_resource[AXGBE_AXGMAC_BAR].addr;
 	pdata->xprop_regs = (void *)((uint8_t *)pdata->xgmac_regs
@@ -620,14 +633,13 @@ eth_axgbe_dev_init(struct rte_eth_dev *eth_dev)
 		pdata->vdata = &axgbe_v2b;
 
 	/* Configure the PCS indirect addressing support */
-	reg = XPCS32_IOREAD(pdata, PCS_V2_WINDOW_DEF);
+	reg = XPCS32_IOREAD(pdata, pdata->xpcs_window_def_reg);
 	pdata->xpcs_window = XPCS_GET_BITS(reg, PCS_V2_WINDOW_DEF, OFFSET);
 	pdata->xpcs_window <<= 6;
 	pdata->xpcs_window_size = XPCS_GET_BITS(reg, PCS_V2_WINDOW_DEF, SIZE);
 	pdata->xpcs_window_size = 1 << (pdata->xpcs_window_size + 7);
 	pdata->xpcs_window_mask = pdata->xpcs_window_size - 1;
-	pdata->xpcs_window_def_reg = PCS_V2_WINDOW_DEF;
-	pdata->xpcs_window_sel_reg = PCS_V2_WINDOW_SELECT;
+
 	PMD_INIT_LOG(DEBUG,
 		     "xpcs window :%x, size :%x, mask :%x ", pdata->xpcs_window,
 		     pdata->xpcs_window_size, pdata->xpcs_window_mask);
-- 
2.17.1


             reply	other threads:[~2020-01-14 11:58 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-14 17:30 Selwin Sebastian [this message]
2020-01-14 12:30 ` Ferruh Yigit
2020-01-14 12:35 ` David Marchand
2020-01-14 13:18   ` Ferruh Yigit
2020-01-20  7:14     ` Sebastian, Selwin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200114173019.14097-1-Selwin.Sebastian@amd.com \
    --to=selwin.sebastian@amd.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).