From: Ivan Dyukov <i.dyukov@samsung.com>
To: dev@dpdk.org, maxime.coquelin@redhat.com, tiwei.bie@intel.com
Cc: Ivan Dyukov <i.dyukov@samsung.com>
Subject: [dpdk-dev] [PATCH 2/2] net/virtio: add link speed devarg
Date: Mon, 20 Jan 2020 17:16:03 +0300 [thread overview]
Message-ID: <20200120141603.18719-3-i.dyukov@samsung.com> (raw)
In-Reply-To: <20200120141603.18719-1-i.dyukov@samsung.com>
Some applications like pktgen use link_speed to calculate
transmit rate. It limits outcome traffic to hardcoded 10G.
This patch adds link_speed devarg which allows to configure
link_speed of virtio device.
Signed-off-by: Ivan Dyukov <i.dyukov@samsung.com>
---
drivers/net/virtio/virtio_ethdev.c | 99 +++++++++++++++++++++++++-----
drivers/net/virtio/virtio_pci.h | 1 +
2 files changed, 85 insertions(+), 15 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d6ccbd7b2..29cf53911 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -45,6 +45,11 @@ static int virtio_dev_promiscuous_enable(struct rte_eth_dev *dev);
static int virtio_dev_promiscuous_disable(struct rte_eth_dev *dev);
static int virtio_dev_allmulticast_enable(struct rte_eth_dev *dev);
static int virtio_dev_allmulticast_disable(struct rte_eth_dev *dev);
+static uint32_t virtio_dev_speed_capa_get(uint32_t link_speed);
+static int virtio_dev_devargs_parse(
+ struct rte_devargs *devargs,
+ int *vdpa,
+ uint32_t *link_speed);
static int virtio_dev_info_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info);
static int virtio_dev_link_update(struct rte_eth_dev *dev,
@@ -1861,6 +1866,7 @@ int
eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
{
struct virtio_hw *hw = eth_dev->data->dev_private;
+ uint32_t link_speed = ETH_SPEED_NUM_10G;
int ret;
if (sizeof(struct virtio_net_hdr_mrg_rxbuf) > RTE_PKTMBUF_HEADROOM) {
@@ -1886,7 +1892,11 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
return 0;
}
-
+ ret = virtio_dev_devargs_parse(eth_dev->device->devargs,
+ NULL, &link_speed);
+ if (ret < 0)
+ return ret;
+ hw->link_speed = link_speed;
/*
* Pass the information to the rte_eth_dev_close() that it should also
* release the private port resources.
@@ -1953,6 +1963,14 @@ eth_virtio_dev_uninit(struct rte_eth_dev *eth_dev)
return 0;
}
+#define VIRTIO_ARG_LINK_SPEED "link_speed"
+#define VIRTIO_ARG_VDPA "vdpa"
+
+static const char *valid_args[] = {
+ VIRTIO_ARG_LINK_SPEED,
+ VIRTIO_ARG_VDPA,
+ NULL
+};
static int vdpa_check_handler(__rte_unused const char *key,
const char *value, void *ret_val)
@@ -1965,30 +1983,82 @@ static int vdpa_check_handler(__rte_unused const char *key,
return 0;
}
+static uint32_t
+virtio_dev_speed_capa_get(uint32_t link_speed) {
+ switch (link_speed) {
+ case ETH_SPEED_NUM_10G:
+ return ETH_LINK_SPEED_10G;
+ case ETH_SPEED_NUM_20G:
+ return ETH_LINK_SPEED_20G;
+ case ETH_SPEED_NUM_25G:
+ return ETH_LINK_SPEED_25G;
+ case ETH_SPEED_NUM_40G:
+ return ETH_LINK_SPEED_40G;
+ case ETH_SPEED_NUM_50G:
+ return ETH_LINK_SPEED_50G;
+ case ETH_SPEED_NUM_56G:
+ return ETH_LINK_SPEED_56G;
+ case ETH_SPEED_NUM_100G:
+ return ETH_LINK_SPEED_100G;
+ default:
+ return 0;
+ }
+}
+
+static int link_speed_handler(const char *key __rte_unused,
+ const char *value, void *ret_val)
+{
+ uint32_t val;
+ if (!value || !ret_val)
+ return -EINVAL;
+ val = strtoul(value, NULL, 0);
+ /* validate input */
+ if (virtio_dev_speed_capa_get(val) == 0)
+ return -EINVAL;
+ *(uint32_t *)ret_val = val;
+
+ return 0;
+}
+
static int
-virtio_dev_devargs_parse(struct rte_devargs *devargs, int *vdpa)
+virtio_dev_devargs_parse(struct rte_devargs *devargs, int *vdpa,
+ uint32_t *link_speed)
{
struct rte_kvargs *kvlist;
- const char *key = "vdpa";
int ret = 0;
if (devargs == NULL)
return 0;
- kvlist = rte_kvargs_parse(devargs->args, NULL);
- if (kvlist == NULL)
+ kvlist = rte_kvargs_parse(devargs->args, valid_args);
+ if (kvlist == NULL) {
+ PMD_INIT_LOG(ERR, "error when parsing param");
return 0;
+ }
+
- if (!rte_kvargs_count(kvlist, key))
- goto exit;
- if (vdpa)
+ if (vdpa && rte_kvargs_count(kvlist, VIRTIO_ARG_VDPA) == 1) {
/* vdpa mode selected when there's a key-value pair:
vdpa=1 */
- ret = rte_kvargs_process(kvlist, key,
+ ret = rte_kvargs_process(kvlist, VIRTIO_ARG_VDPA,
vdpa_check_handler, vdpa);
- if (ret < 0) {
- goto exit;
+ if (ret < 0) {
+ PMD_INIT_LOG(ERR, "error to parse %s",
+ VIRTIO_ARG_VDPA);
+ goto exit;
+ }
+ }
+ if (link_speed &&
+ rte_kvargs_count(kvlist, VIRTIO_ARG_LINK_SPEED) == 1) {
+ ret = rte_kvargs_process(kvlist,
+ VIRTIO_ARG_LINK_SPEED,
+ link_speed_handler, link_speed);
+ if (ret < 0) {
+ PMD_INIT_LOG(ERR, "error to parse %s",
+ VIRTIO_ARG_LINK_SPEED);
+ goto exit;
+ }
}
@@ -2003,7 +2073,7 @@ static int eth_virtio_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
int vdpa = 0;
int ret = 0;
- ret = virtio_dev_devargs_parse(pci_dev->device.devargs, &vdpa);
+ ret = virtio_dev_devargs_parse(pci_dev->device.devargs, &vdpa, NULL);
if (ret < 0) {
PMD_DRV_LOG(ERR,
"devargs parsing is failed");
@@ -2385,7 +2455,7 @@ virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complet
memset(&link, 0, sizeof(link));
link.link_duplex = ETH_LINK_FULL_DUPLEX;
- link.link_speed = ETH_SPEED_NUM_10G;
+ link.link_speed = hw->link_speed;
link.link_autoneg = ETH_LINK_FIXED;
if (!hw->started) {
@@ -2440,8 +2510,7 @@ virtio_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
{
uint64_t tso_mask, host_features;
struct virtio_hw *hw = dev->data->dev_private;
-
- dev_info->speed_capa = ETH_LINK_SPEED_10G; /* fake value */
+ dev_info->speed_capa = virtio_dev_speed_capa_get(hw->link_speed);
dev_info->max_rx_queues =
RTE_MIN(hw->max_queue_pairs, VIRTIO_MAX_RX_QUEUES);
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index a38cb45ad..688eda914 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -253,6 +253,7 @@ struct virtio_hw {
uint16_t port_id;
uint8_t mac_addr[RTE_ETHER_ADDR_LEN];
uint32_t notify_off_multiplier;
+ uint32_t link_speed; /* link speed in MB */
uint8_t *isr;
uint16_t *notify_base;
struct virtio_pci_common_cfg *common_cfg;
--
2.17.1
prev parent reply other threads:[~2020-01-20 14:18 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20200120141733eucas1p230624b7ac81aab9347cd1aec9cc059e0@eucas1p2.samsung.com>
2020-01-20 14:16 ` [dpdk-dev] " Ivan Dyukov
[not found] ` <CGME20200120141757eucas1p268f4c94063dfe05186314ed9ee00e10a@eucas1p2.samsung.com>
2020-01-20 14:16 ` [dpdk-dev] [PATCH 1/2] net/virtio: refactor devargs parsing Ivan Dyukov
[not found] ` <CGME20200120141803eucas1p237734f0e71549561006618f4c8ee637e@eucas1p2.samsung.com>
2020-01-20 14:16 ` Ivan Dyukov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200120141603.18719-3-i.dyukov@samsung.com \
--to=i.dyukov@samsung.com \
--cc=dev@dpdk.org \
--cc=maxime.coquelin@redhat.com \
--cc=tiwei.bie@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).