From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id C6CAAA0524; Fri, 31 Jan 2020 18:04:27 +0100 (CET) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id AB1CA1C0C3; Fri, 31 Jan 2020 18:04:27 +0100 (CET) Received: from mx0b-0016f401.pphosted.com (mx0b-0016f401.pphosted.com [67.231.156.173]) by dpdk.org (Postfix) with ESMTP id DDD751C030; Fri, 31 Jan 2020 18:04:25 +0100 (CET) Received: from pps.filterd (m0045851.ppops.net [127.0.0.1]) by mx0b-0016f401.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 00VGuGqN032458; Fri, 31 Jan 2020 09:04:20 -0800 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=marvell.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=pfpt0818; bh=ufhLCgLyMdgvXhTyzVBPImoY45UJtuYoF8lxmE5S2VY=; b=FreqnbzNk7PgCEKbGDOm4d0hydJkz/tEI9G2Lh3jiOuU2Fb3VJ1U4E2kPknqjiqdjoWN CB9kPZaB9kvQqpg7Lz+60o5hJhN+K5xyuQopjub7rn90qCJzclnMkWWEsxBpFyywFUtQ aC+c4C/S/vEW4sAsvExUQlymhR0PjqLynaej9oHsuS+WnGQOCivYPXz/r6k6vOd0ELoI ZO05U4ktScblLw3IGqqrqloh31f0DZk9d6VdHZ0HCdOnH9zG9ms6p15vGZ468C27Q/LH gy6mie5/it5yk8Q6nzWiGc38QHtfbKmTFr72paXMhinBY8nf4YNbEvgObgFElyJwjH38 7A== Received: from sc-exch03.marvell.com ([199.233.58.183]) by mx0b-0016f401.pphosted.com with ESMTP id 2xrp2tmgd2-6 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-SHA384 bits=256 verify=NOT); Fri, 31 Jan 2020 09:04:19 -0800 Received: from SC-EXCH03.marvell.com (10.93.176.83) by SC-EXCH03.marvell.com (10.93.176.83) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Fri, 31 Jan 2020 09:03:23 -0800 Received: from maili.marvell.com (10.93.176.43) by SC-EXCH03.marvell.com (10.93.176.83) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Fri, 31 Jan 2020 09:03:23 -0800 Received: from jerin-lab.marvell.com (jerin-lab.marvell.com [10.28.34.14]) by maili.marvell.com (Postfix) with ESMTP id 75F493F7040; Fri, 31 Jan 2020 09:03:13 -0800 (PST) From: To: CC: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , Date: Fri, 31 Jan 2020 22:32:01 +0530 Message-ID: <20200131170201.3236153-6-jerinj@marvell.com> X-Mailer: git-send-email 2.24.1 In-Reply-To: <20200131170201.3236153-1-jerinj@marvell.com> References: <20200131170201.3236153-1-jerinj@marvell.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.138, 18.0.572 definitions=2020-01-31_04:2020-01-31, 2020-01-31 signatures=0 Subject: [dpdk-dev] [RFC PATCH 5/5] example/l3fwd_graph: l3fwd using graph architecture X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" From: Nithin Dabilpuram This example application showcase the l3fwd implementation using graph architecture. The graphical topology representation of the l3fwd-graph is the following, http://bit.ly/39UPPGm Signed-off-by: Nithin Dabilpuram --- examples/Makefile | 3 + examples/l3fwd-graph/Makefile | 58 ++ examples/l3fwd-graph/main.c | 1131 ++++++++++++++++++++++++++++++ examples/l3fwd-graph/meson.build | 13 + examples/meson.build | 6 +- 5 files changed, 1209 insertions(+), 2 deletions(-) create mode 100644 examples/l3fwd-graph/Makefile create mode 100644 examples/l3fwd-graph/main.c create mode 100644 examples/l3fwd-graph/meson.build diff --git a/examples/Makefile b/examples/Makefile index feff79784..96a2b9575 100644 --- a/examples/Makefile +++ b/examples/Makefile @@ -51,6 +51,9 @@ DIRS-$(CONFIG_RTE_LIBRTE_ACL) += l3fwd-acl ifeq ($(CONFIG_RTE_LIBRTE_LPM)$(CONFIG_RTE_LIBRTE_HASH),yy) DIRS-$(CONFIG_RTE_LIBRTE_POWER) += l3fwd-power endif +ifeq ($(CONFIG_RTE_LIBRTE_GRAPH), y) +DIRS-y += l3fwd-graph +endif DIRS-y += link_status_interrupt DIRS-y += multi_process DIRS-y += ntb diff --git a/examples/l3fwd-graph/Makefile b/examples/l3fwd-graph/Makefile new file mode 100644 index 000000000..7596de500 --- /dev/null +++ b/examples/l3fwd-graph/Makefile @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(C) 2020 Marvell International Ltd. + +# binary name +APP = l3fwd-graph + +# all source are stored in SRCS-y +SRCS-y := main.c + +# Build using pkg-config variables if possible +ifeq ($(shell pkg-config --exists libdpdk && echo 0),0) + +all: shared +.PHONY: shared static +shared: build/$(APP)-shared + ln -sf $(APP)-shared build/$(APP) +static: build/$(APP)-static + ln -sf $(APP)-static build/$(APP) + +PKGCONF=pkg-config --define-prefix + +PC_FILE := $(shell $(PKGCONF) --path libdpdk) +CFLAGS += -O3 $(shell $(PKGCONF) --cflags libdpdk) -DALLOW_EXPERIMENTAL_API +LDFLAGS_SHARED = $(shell $(PKGCONF) --libs libdpdk) +LDFLAGS_STATIC = -Wl,-Bstatic $(shell $(PKGCONF) --static --libs libdpdk) + +build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build + $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED) + +build/$(APP)-static: $(SRCS-y) Makefile $(PC_FILE) | build + $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_STATIC) + +build: + @mkdir -p $@ + +.PHONY: clean +clean: + rm -f build/$(APP) build/$(APP)-static build/$(APP)-shared + test -d build && rmdir -p build || true + +else # Build using legacy build system + +ifeq ($(RTE_SDK),) +$(error "Please define RTE_SDK environment variable") +endif + +# Default target, detect a build directory, by looking for a path with a .config +RTE_TARGET ?= $(notdir $(abspath $(dir $(firstword $(wildcard $(RTE_SDK)/*/.config))))) + +include $(RTE_SDK)/mk/rte.vars.mk + +CFLAGS += -DALLOW_EXPERIMENTAL_API +CFLAGS += -I$(SRCDIR) +CFLAGS += -O3 $(USER_FLAGS) +CFLAGS += $(WERROR_FLAGS) + +include $(RTE_SDK)/mk/rte.extapp.mk +endif diff --git a/examples/l3fwd-graph/main.c b/examples/l3fwd-graph/main.c new file mode 100644 index 000000000..7be41c4dc --- /dev/null +++ b/examples/l3fwd-graph/main.c @@ -0,0 +1,1131 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright(C) 2020 Marvell International Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* Log type */ +#define RTE_LOGTYPE_L3FWD_GRAPH RTE_LOGTYPE_USER1 + +/* + * Configurable number of RX/TX ring descriptors + */ +#define RTE_TEST_RX_DESC_DEFAULT 1024 +#define RTE_TEST_TX_DESC_DEFAULT 1024 + +#define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS +#define MAX_RX_QUEUE_PER_PORT 128 + +#define MAX_RX_QUEUE_PER_LCORE 16 + +#define MAX_LCORE_PARAMS 1024 + +#define NB_SOCKETS 8 + +/* Static global variables used within this file. */ +static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; +static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; + +/**< Ports set in promiscuous mode off by default. */ +static int promiscuous_on; + +static int numa_on = 1; /**< NUMA is enabled by default. */ +static int per_port_pool; /**< Use separate buffer pools per port; disabled */ + /**< by default */ + +static volatile bool force_quit; + +/* ethernet addresses of ports */ +static uint64_t dest_eth_addr[RTE_MAX_ETHPORTS]; +static struct rte_ether_addr ports_eth_addr[RTE_MAX_ETHPORTS]; +xmm_t val_eth[RTE_MAX_ETHPORTS]; + +/* mask of enabled ports */ +static uint32_t enabled_port_mask; + +struct lcore_rx_queue { + uint16_t port_id; + uint8_t queue_id; + char node_name[RTE_NODE_NAMESIZE]; +}; + +/* lcore conf */ +struct lcore_conf { + uint16_t n_rx_queue; + struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE]; + + struct rte_graph *graph; + char name[RTE_GRAPH_NAMESIZE]; + rte_graph_t graph_id; +} __rte_cache_aligned; + +static struct lcore_conf lcore_conf[RTE_MAX_LCORE]; + +struct lcore_params { + uint16_t port_id; + uint8_t queue_id; + uint8_t lcore_id; +} __rte_cache_aligned; + +static struct lcore_params lcore_params_array[MAX_LCORE_PARAMS]; +static struct lcore_params lcore_params_array_default[] = { + {0, 0, 2}, + {0, 1, 2}, + {0, 2, 2}, + {1, 0, 2}, + {1, 1, 2}, + {1, 2, 2}, + {2, 0, 2}, + {3, 0, 3}, + {3, 1, 3}, +}; + +static struct lcore_params * lcore_params = lcore_params_array_default; +static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) / + sizeof(lcore_params_array_default[0]); + +static struct rte_eth_conf port_conf = { + .rxmode = { + .mq_mode = ETH_MQ_RX_RSS, + .max_rx_pkt_len = RTE_ETHER_MAX_LEN, + .split_hdr_size = 0, + }, + .rx_adv_conf = { + .rss_conf = { + .rss_key = NULL, + .rss_hf = ETH_RSS_IP, + }, + }, + .txmode = { + .mq_mode = ETH_MQ_TX_NONE, + }, +}; + +static struct rte_mempool *pktmbuf_pool[RTE_MAX_ETHPORTS][NB_SOCKETS]; + +static struct rte_node_ethdev_config ethdev_conf[RTE_MAX_ETHPORTS]; + +struct ipv4_l3fwd_lpm_route { + uint32_t ip; + uint8_t depth; + uint8_t if_out; +}; + +#define IPV4_L3FWD_LPM_NUM_ROUTES \ + (sizeof(ipv4_l3fwd_lpm_route_array) / sizeof(ipv4_l3fwd_lpm_route_array[0])) +/* 198.18.0.0/16 are set aside for RFC2544 benchmarking. */ +static struct ipv4_l3fwd_lpm_route ipv4_l3fwd_lpm_route_array[] = { + {RTE_IPV4(198, 18, 0, 0), 24, 0}, + {RTE_IPV4(198, 18, 1, 0), 24, 1}, + {RTE_IPV4(198, 18, 2, 0), 24, 2}, + {RTE_IPV4(198, 18, 3, 0), 24, 3}, + {RTE_IPV4(198, 18, 4, 0), 24, 4}, + {RTE_IPV4(198, 18, 5, 0), 24, 5}, + {RTE_IPV4(198, 18, 6, 0), 24, 6}, + {RTE_IPV4(198, 18, 7, 0), 24, 7}, +}; + +static int +check_lcore_params(void) +{ + uint8_t queue, lcore; + uint16_t i; + int socketid; + + for (i = 0; i < nb_lcore_params; ++i) { + queue = lcore_params[i].queue_id; + if (queue >= MAX_RX_QUEUE_PER_PORT) { + printf("invalid queue number: %hhu\n", queue); + return -1; + } + lcore = lcore_params[i].lcore_id; + if (!rte_lcore_is_enabled(lcore)) { + printf("error: lcore %hhu is not enabled in lcore mask\n", lcore); + return -1; + } + + if (lcore == rte_get_master_lcore()) { + printf("error: lcore %u is master lcore\n", lcore); + return -1; + } + if ((socketid = rte_lcore_to_socket_id(lcore) != 0) && + (numa_on == 0)) { + printf("warning: lcore %hhu is on socket %d with numa off \n", + lcore, socketid); + } + } + return 0; +} + +static int +check_port_config(void) +{ + uint16_t portid; + uint16_t i; + + for (i = 0; i < nb_lcore_params; ++i) { + portid = lcore_params[i].port_id; + if ((enabled_port_mask & (1 << portid)) == 0) { + printf("port %u is not enabled in port mask\n", portid); + return -1; + } + if (!rte_eth_dev_is_valid_port(portid)) { + printf("port %u is not present on the board\n", portid); + return -1; + } + } + return 0; +} + +static uint8_t +get_port_n_rx_queues(const uint16_t port) +{ + int queue = -1; + uint16_t i; + + for (i = 0; i < nb_lcore_params; ++i) { + if (lcore_params[i].port_id == port) { + if (lcore_params[i].queue_id == queue+1) + queue = lcore_params[i].queue_id; + else + rte_exit(EXIT_FAILURE, "queue ids of the port %d must be" + " in sequence and must start with 0\n", + lcore_params[i].port_id); + } + } + return (uint8_t)(++queue); +} + +static int +init_lcore_rx_queues(void) +{ + uint16_t i, nb_rx_queue; + uint8_t lcore; + + for (i = 0; i < nb_lcore_params; ++i) { + lcore = lcore_params[i].lcore_id; + nb_rx_queue = lcore_conf[lcore].n_rx_queue; + if (nb_rx_queue >= MAX_RX_QUEUE_PER_LCORE) { + printf("error: too many queues (%u) for lcore: %u\n", + (unsigned)nb_rx_queue + 1, (unsigned)lcore); + return -1; + } else { + lcore_conf[lcore].rx_queue_list[nb_rx_queue].port_id = + lcore_params[i].port_id; + lcore_conf[lcore].rx_queue_list[nb_rx_queue].queue_id = + lcore_params[i].queue_id; + lcore_conf[lcore].n_rx_queue++; + } + } + return 0; +} + +/* display usage */ +static void +print_usage(const char *prgname) +{ + fprintf(stderr, "%s [EAL options] --" + " -p PORTMASK" + " [-P]" + " [-E]" + " [-L]" + " --config (port,queue,lcore)[,(port,queue,lcore)]" + " [--eth-dest=X,MM:MM:MM:MM:MM:MM]" + " [--enable-jumbo [--max-pkt-len PKTLEN]]" + " [--no-numa]" + " [--per-port-pool]\n\n" + + " -p PORTMASK: Hexadecimal bitmask of ports to configure\n" + " -P : Enable promiscuous mode\n" + " --config (port,queue,lcore): Rx queue configuration\n" + " --eth-dest=X,MM:MM:MM:MM:MM:MM: Ethernet destination for port X\n" + " --enable-jumbo: Enable jumbo frames\n" + " --max-pkt-len: Under the premise of enabling jumbo,\n" + " maximum packet length in decimal (64-9600)\n" + " --no-numa: Disable numa awareness\n" + " --per-port-pool: Use separate buffer pool per port\n\n", + prgname); +} + +static int +parse_max_pkt_len(const char *pktlen) +{ + char *end = NULL; + unsigned long len; + + /* parse decimal string */ + len = strtoul(pktlen, &end, 10); + if ((pktlen[0] == '\0') || (end == NULL) || (*end != '\0')) + return -1; + + if (len == 0) + return -1; + + return len; +} + +static int +parse_portmask(const char *portmask) +{ + char *end = NULL; + unsigned long pm; + + /* parse hexadecimal string */ + pm = strtoul(portmask, &end, 16); + if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0')) + return -1; + + if (pm == 0) + return -1; + + return pm; +} + +static int +parse_config(const char *q_arg) +{ + char s[256]; + const char *p, *p0 = q_arg; + char *end; + enum fieldnames { + FLD_PORT = 0, + FLD_QUEUE, + FLD_LCORE, + _NUM_FLD + }; + unsigned long int_fld[_NUM_FLD]; + char *str_fld[_NUM_FLD]; + int i; + unsigned size; + + nb_lcore_params = 0; + + while ((p = strchr(p0,'(')) != NULL) { + ++p; + if((p0 = strchr(p,')')) == NULL) + return -1; + + size = p0 - p; + if(size >= sizeof(s)) + return -1; + + snprintf(s, sizeof(s), "%.*s", size, p); + if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') != _NUM_FLD) + return -1; + for (i = 0; i < _NUM_FLD; i++){ + errno = 0; + int_fld[i] = strtoul(str_fld[i], &end, 0); + if (errno != 0 || end == str_fld[i] || int_fld[i] > 255) + return -1; + } + if (nb_lcore_params >= MAX_LCORE_PARAMS) { + printf("exceeded max number of lcore params: %hu\n", + nb_lcore_params); + return -1; + } + lcore_params_array[nb_lcore_params].port_id = + (uint8_t)int_fld[FLD_PORT]; + lcore_params_array[nb_lcore_params].queue_id = + (uint8_t)int_fld[FLD_QUEUE]; + lcore_params_array[nb_lcore_params].lcore_id = + (uint8_t)int_fld[FLD_LCORE]; + ++nb_lcore_params; + } + lcore_params = lcore_params_array; + return 0; +} + +static void +parse_eth_dest(const char *optarg) +{ + uint16_t portid; + char *port_end; + uint8_t c, *dest, peer_addr[6]; + + errno = 0; + portid = strtoul(optarg, &port_end, 10); + if (errno != 0 || port_end == optarg || *port_end++ != ',') + rte_exit(EXIT_FAILURE, + "Invalid eth-dest: %s", optarg); + if (portid >= RTE_MAX_ETHPORTS) + rte_exit(EXIT_FAILURE, + "eth-dest: port %d >= RTE_MAX_ETHPORTS(%d)\n", + portid, RTE_MAX_ETHPORTS); + + if (cmdline_parse_etheraddr(NULL, port_end, + &peer_addr, sizeof(peer_addr)) < 0) + rte_exit(EXIT_FAILURE, + "Invalid ethernet address: %s\n", + port_end); + dest = (uint8_t *)&dest_eth_addr[portid]; + for (c = 0; c < 6; c++) + dest[c] = peer_addr[c]; + *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid]; +} + +#define MAX_JUMBO_PKT_LEN 9600 +#define MEMPOOL_CACHE_SIZE 256 + +static const char short_options[] = + "p:" /* portmask */ + "P" /* promiscuous */ + "L" /* enable long prefix match */ + "E" /* enable exact match */ + ; + +#define CMD_LINE_OPT_CONFIG "config" +#define CMD_LINE_OPT_ETH_DEST "eth-dest" +#define CMD_LINE_OPT_NO_NUMA "no-numa" +#define CMD_LINE_OPT_ENABLE_JUMBO "enable-jumbo" +#define CMD_LINE_OPT_PER_PORT_POOL "per-port-pool" +enum { + /* long options mapped to a short option */ + + /* first long only option value must be >= 256, so that we won't + * conflict with short options */ + CMD_LINE_OPT_MIN_NUM = 256, + CMD_LINE_OPT_CONFIG_NUM, + CMD_LINE_OPT_ETH_DEST_NUM, + CMD_LINE_OPT_NO_NUMA_NUM, + CMD_LINE_OPT_ENABLE_JUMBO_NUM, + CMD_LINE_OPT_PARSE_PER_PORT_POOL, +}; + +static const struct option lgopts[] = { + {CMD_LINE_OPT_CONFIG, 1, 0, CMD_LINE_OPT_CONFIG_NUM}, + {CMD_LINE_OPT_ETH_DEST, 1, 0, CMD_LINE_OPT_ETH_DEST_NUM}, + {CMD_LINE_OPT_NO_NUMA, 0, 0, CMD_LINE_OPT_NO_NUMA_NUM}, + {CMD_LINE_OPT_ENABLE_JUMBO, 0, 0, CMD_LINE_OPT_ENABLE_JUMBO_NUM}, + {CMD_LINE_OPT_PER_PORT_POOL, 0, 0, CMD_LINE_OPT_PARSE_PER_PORT_POOL}, + {NULL, 0, 0, 0} +}; + +/* + * This expression is used to calculate the number of mbufs needed + * depending on user input, taking into account memory for rx and + * tx hardware rings, cache per lcore and mtable per port per lcore. + * RTE_MAX is used to ensure that NB_MBUF never goes below a minimum + * value of 8192 + */ +#define NB_MBUF(nports) RTE_MAX( \ + (nports*nb_rx_queue*nb_rxd + \ + nports*nb_lcores*RTE_GRAPH_BURST_SIZE + \ + nports*n_tx_queue*nb_txd + \ + nb_lcores*MEMPOOL_CACHE_SIZE), \ + (unsigned)8192) + +/* Parse the argument given in the command line of the application */ +static int +parse_args(int argc, char **argv) +{ + int opt, ret; + char **argvopt; + int option_index; + char *prgname = argv[0]; + + argvopt = argv; + + /* Error or normal output strings. */ + while ((opt = getopt_long(argc, argvopt, short_options, + lgopts, &option_index)) != EOF) { + + switch (opt) { + /* portmask */ + case 'p': + enabled_port_mask = parse_portmask(optarg); + if (enabled_port_mask == 0) { + fprintf(stderr, "Invalid portmask\n"); + print_usage(prgname); + return -1; + } + break; + + case 'P': + promiscuous_on = 1; + break; + + /* long options */ + case CMD_LINE_OPT_CONFIG_NUM: + ret = parse_config(optarg); + if (ret) { + fprintf(stderr, "Invalid config\n"); + print_usage(prgname); + return -1; + } + break; + + case CMD_LINE_OPT_ETH_DEST_NUM: + parse_eth_dest(optarg); + break; + + case CMD_LINE_OPT_NO_NUMA_NUM: + numa_on = 0; + break; + + case CMD_LINE_OPT_ENABLE_JUMBO_NUM: { + const struct option lenopts = { + "max-pkt-len", required_argument, 0, 0 + }; + + port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME; + port_conf.txmode.offloads |= DEV_TX_OFFLOAD_MULTI_SEGS; + + /* + * if no max-pkt-len set, use the default + * value RTE_ETHER_MAX_LEN. + */ + if (getopt_long(argc, argvopt, "", + &lenopts, &option_index) == 0) { + ret = parse_max_pkt_len(optarg); + if (ret < 64 || ret > MAX_JUMBO_PKT_LEN) { + fprintf(stderr, + "invalid maximum packet length\n"); + print_usage(prgname); + return -1; + } + port_conf.rxmode.max_rx_pkt_len = ret; + } + break; + } + + case CMD_LINE_OPT_PARSE_PER_PORT_POOL: + printf("per port buffer pool is enabled\n"); + per_port_pool = 1; + break; + + default: + print_usage(prgname); + return -1; + } + } + + if (optind >= 0) + argv[optind-1] = prgname; + + ret = optind-1; + optind = 1; /* reset getopt lib */ + return ret; +} + +static void +print_ethaddr(const char *name, const struct rte_ether_addr *eth_addr) +{ + char buf[RTE_ETHER_ADDR_FMT_SIZE]; + rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE, eth_addr); + printf("%s%s", name, buf); +} + +static int +init_mem(uint16_t portid, unsigned int nb_mbuf) +{ + int socketid; + unsigned lcore_id; + char s[64]; + + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { + if (rte_lcore_is_enabled(lcore_id) == 0) + continue; + + if (numa_on) + socketid = rte_lcore_to_socket_id(lcore_id); + else + socketid = 0; + + if (socketid >= NB_SOCKETS) { + rte_exit(EXIT_FAILURE, + "Socket %d of lcore %u is out of range %d\n", + socketid, lcore_id, NB_SOCKETS); + } + + if (pktmbuf_pool[portid][socketid] == NULL) { + snprintf(s, sizeof(s), "mbuf_pool_%d:%d", + portid, socketid); + /* Create a pool with priv size of a cacheline */ + pktmbuf_pool[portid][socketid] = + rte_pktmbuf_pool_create(s, nb_mbuf, + MEMPOOL_CACHE_SIZE, RTE_CACHE_LINE_SIZE, + RTE_MBUF_DEFAULT_BUF_SIZE, socketid); + if (pktmbuf_pool[portid][socketid] == NULL) + rte_exit(EXIT_FAILURE, + "Cannot init mbuf pool on socket %d\n", + socketid); + else + printf("Allocated mbuf pool on socket %d\n", + socketid); + + } + } + return 0; +} + +/* Check the link status of all ports in up to 9s, and print them finally */ +static void +check_all_ports_link_status(uint32_t port_mask) +{ +#define CHECK_INTERVAL 100 /* 100ms */ +#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */ + uint16_t portid; + uint8_t count, all_ports_up, print_flag = 0; + struct rte_eth_link link; + + printf("\nChecking link status"); + fflush(stdout); + for (count = 0; count <= MAX_CHECK_TIME; count++) { + if (force_quit) + return; + all_ports_up = 1; + RTE_ETH_FOREACH_DEV(portid) { + if (force_quit) + return; + if ((port_mask & (1 << portid)) == 0) + continue; + memset(&link, 0, sizeof(link)); + rte_eth_link_get_nowait(portid, &link); + /* print link status if flag set */ + if (print_flag == 1) { + if (link.link_status) + printf( + "Port%d Link Up. Speed %u Mbps -%s\n", + portid, link.link_speed, + (link.link_duplex == ETH_LINK_FULL_DUPLEX) ? + ("full-duplex") : ("half-duplex\n")); + else + printf("Port %d Link Down\n", portid); + continue; + } + /* clear all_ports_up flag if any link down */ + if (link.link_status == ETH_LINK_DOWN) { + all_ports_up = 0; + break; + } + } + /* after finally printing all link status, get out */ + if (print_flag == 1) + break; + + if (all_ports_up == 0) { + printf("."); + fflush(stdout); + rte_delay_ms(CHECK_INTERVAL); + } + + /* set the print_flag if all ports up or timeout */ + if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) { + print_flag = 1; + printf("done\n"); + } + } +} + +static void +signal_handler(int signum) +{ + if (signum == SIGINT || signum == SIGTERM) { + printf("\n\nSignal %d received, preparing to exit...\n", + signum); + force_quit = true; + } +} + +static void +print_stats(void) +{ + const char topLeft[] = { 27, '[', '1', ';', '1', 'H','\0' }; + const char clr[] = { 27, '[', '2', 'J', '\0' }; + struct rte_graph_cluster_stats_param s_param; + struct rte_graph_cluster_stats *stats; + const char *pattern = "worker_*"; + + /* Prepare stats object */ + memset(&s_param, 0, sizeof(s_param)); + s_param.f = stdout; + s_param.socket_id = SOCKET_ID_ANY; + s_param.graph_patterns = &pattern; + s_param.nb_graph_patterns = 1; + + stats = rte_graph_cluster_stats_create(&s_param); + if (stats == NULL) + rte_exit(EXIT_FAILURE, + "Unable to create stats object\n"); + + while (!force_quit) { + /* Clear screen and move to top left */ + printf("%s%s", clr, topLeft); + rte_graph_cluster_stats_get(stats, 0); + rte_delay_ms(1E3); + } + + rte_graph_cluster_stats_destroy(stats); +} + +/* main processing loop */ +static int +graph_main_loop(void *conf) +{ + struct lcore_conf *qconf; + struct rte_graph *graph; + unsigned lcore_id; + + RTE_SET_USED(conf); + + lcore_id = rte_lcore_id(); + qconf = &lcore_conf[lcore_id]; + graph = qconf->graph; + + if (!graph) { + RTE_LOG(INFO, L3FWD_GRAPH, + "lcore %u has nothing to do\n", lcore_id); + return 0; + } + + RTE_LOG(INFO, L3FWD_GRAPH, + "entering main loop on lcore %u, graph %s(%p)\n", + lcore_id, qconf->name, graph); + + while (likely(!force_quit)) { + rte_graph_walk(graph); + } + + return 0; +} + +int +main(int argc, char **argv) +{ + const char *node_patterns[64] = {"ip4*", "ethdev_tx-*", "pkt_drop", }; + uint8_t rewrite_data[2 * sizeof(struct rte_ether_addr)]; + uint8_t nb_rx_queue, queue, socketid; + struct rte_ether_addr *ether_addr; + struct rte_graph_param graph_conf; + struct rte_eth_dev_info dev_info; + unsigned nb_ports, nb_conf = 0; + uint32_t n_tx_queue, nb_lcores; + struct rte_eth_txconf *txconf; + uint16_t queueid, portid, i; + struct lcore_conf *qconf; + uint16_t nb_patterns = 3; + uint16_t nb_graphs = 0; + uint8_t rewrite_len; + unsigned lcore_id; + int ret; + + /* init EAL */ + ret = rte_eal_init(argc, argv); + if (ret < 0) + rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n"); + argc -= ret; + argv += ret; + + force_quit = false; + signal(SIGINT, signal_handler); + signal(SIGTERM, signal_handler); + + /* pre-init dst MACs for all ports to 02:00:00:00:00:xx */ + for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) { + dest_eth_addr[portid] = + RTE_ETHER_LOCAL_ADMIN_ADDR + ((uint64_t)portid << 40); + *(uint64_t *)(val_eth + portid) = dest_eth_addr[portid]; + } + + /* parse application arguments (after the EAL ones) */ + ret = parse_args(argc, argv); + if (ret < 0) + rte_exit(EXIT_FAILURE, "Invalid L3FWD_GRAPH parameters\n"); + + if (check_lcore_params() < 0) + rte_exit(EXIT_FAILURE, "check_lcore_params failed\n"); + + ret = init_lcore_rx_queues(); + if (ret < 0) + rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n"); + + nb_ports = rte_eth_dev_count_avail(); + + if (check_port_config() < 0) + rte_exit(EXIT_FAILURE, "check_port_config failed\n"); + + nb_lcores = rte_lcore_count(); + + /* initialize all ports */ + RTE_ETH_FOREACH_DEV(portid) { + struct rte_eth_conf local_port_conf = port_conf; + + /* skip ports that are not enabled */ + if ((enabled_port_mask & (1 << portid)) == 0) { + printf("\nSkipping disabled port %d\n", portid); + continue; + } + + /* init port */ + printf("Initializing port %d ... ", portid ); + fflush(stdout); + + nb_rx_queue = get_port_n_rx_queues(portid); + n_tx_queue = nb_lcores; + if (n_tx_queue > MAX_TX_QUEUE_PER_PORT) + n_tx_queue = MAX_TX_QUEUE_PER_PORT; + printf("Creating queues: nb_rxq=%d nb_txq=%u... ", + nb_rx_queue, (unsigned)n_tx_queue ); + + rte_eth_dev_info_get(portid, &dev_info); + if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE) + local_port_conf.txmode.offloads |= + DEV_TX_OFFLOAD_MBUF_FAST_FREE; + + local_port_conf.rx_adv_conf.rss_conf.rss_hf &= + dev_info.flow_type_rss_offloads; + if (local_port_conf.rx_adv_conf.rss_conf.rss_hf != + port_conf.rx_adv_conf.rss_conf.rss_hf) { + printf("Port %u modified RSS hash function based on hardware support," + "requested:%#"PRIx64" configured:%#"PRIx64"\n", + portid, + port_conf.rx_adv_conf.rss_conf.rss_hf, + local_port_conf.rx_adv_conf.rss_conf.rss_hf); + } + + ret = rte_eth_dev_configure(portid, nb_rx_queue, + (uint16_t)n_tx_queue, &local_port_conf); + if (ret < 0) + rte_exit(EXIT_FAILURE, + "Cannot configure device: err=%d, port=%d\n", + ret, portid); + + ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd, + &nb_txd); + if (ret < 0) + rte_exit(EXIT_FAILURE, + "Cannot adjust number of descriptors: err=%d, " + "port=%d\n", ret, portid); + + rte_eth_macaddr_get(portid, &ports_eth_addr[portid]); + print_ethaddr(" Address:", &ports_eth_addr[portid]); + printf(", "); + print_ethaddr("Destination:", + (const struct rte_ether_addr *)&dest_eth_addr[portid]); + printf(", "); + + /* + * prepare src MACs for each port. + */ + rte_ether_addr_copy(&ports_eth_addr[portid], + (struct rte_ether_addr *)(val_eth + portid) + 1); + + /* init memory */ + if (!per_port_pool) { + /* portid = 0; this is *not* signifying the first port, + * rather, it signifies that portid is ignored. + */ + ret = init_mem(0, NB_MBUF(nb_ports)); + } else { + ret = init_mem(portid, NB_MBUF(1)); + } + if (ret < 0) + rte_exit(EXIT_FAILURE, "init_mem failed\n"); + + /* init one TX queue per couple (lcore,port) */ + queueid = 0; + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { + if (rte_lcore_is_enabled(lcore_id) == 0) + continue; + + qconf = &lcore_conf[lcore_id]; + + if (numa_on) + socketid = + (uint8_t)rte_lcore_to_socket_id(lcore_id); + else + socketid = 0; + + printf("txq=%u,%d,%d ", lcore_id, queueid, socketid); + fflush(stdout); + + txconf = &dev_info.default_txconf; + txconf->offloads = local_port_conf.txmode.offloads; + ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd, + socketid, txconf); + if (ret < 0) + rte_exit(EXIT_FAILURE, + "rte_eth_tx_queue_setup: err=%d, " + "port=%d\n", ret, portid); + queueid++; + } + + /* Setup ethdev node config */ + ethdev_conf[nb_conf].port_id = portid; + ethdev_conf[nb_conf].num_rx_queues = nb_rx_queue; + ethdev_conf[nb_conf].num_tx_queues = n_tx_queue; + if (!per_port_pool) + ethdev_conf[nb_conf].mp = + pktmbuf_pool[0]; + + else + ethdev_conf[nb_conf].mp = + pktmbuf_pool[portid]; + ethdev_conf[nb_conf].mp_count = NB_SOCKETS; + + nb_conf++; + printf("\n"); + } + + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { + if (rte_lcore_is_enabled(lcore_id) == 0) + continue; + qconf = &lcore_conf[lcore_id]; + printf("\nInitializing rx queues on lcore %u ... ", lcore_id ); + fflush(stdout); + /* init RX queues */ + for(queue = 0; queue < qconf->n_rx_queue; ++queue) { + struct rte_eth_rxconf rxq_conf; + + portid = qconf->rx_queue_list[queue].port_id; + queueid = qconf->rx_queue_list[queue].queue_id; + + if (numa_on) + socketid = + (uint8_t)rte_lcore_to_socket_id(lcore_id); + else + socketid = 0; + + printf("rxq=%d,%d,%d ", portid, queueid, socketid); + fflush(stdout); + + rte_eth_dev_info_get(portid, &dev_info); + rxq_conf = dev_info.default_rxconf; + rxq_conf.offloads = port_conf.rxmode.offloads; + if (!per_port_pool) + ret = rte_eth_rx_queue_setup(portid, queueid, + nb_rxd, socketid, + &rxq_conf, + pktmbuf_pool[0][socketid]); + else + ret = rte_eth_rx_queue_setup(portid, queueid, + nb_rxd, socketid, + &rxq_conf, + pktmbuf_pool[portid][socketid]); + if (ret < 0) + rte_exit(EXIT_FAILURE, + "rte_eth_rx_queue_setup: err=%d, port=%d\n", + ret, portid); + + /* Add this queue node to its graph */ + snprintf(qconf->rx_queue_list[queue].node_name, + RTE_NODE_NAMESIZE, "ethdev_rx-%u-%u", + portid, queueid); + } + + /* Alloc a graph to this lcore only if source exists */ + if (qconf->n_rx_queue) { + qconf->graph_id = nb_graphs; + nb_graphs++; + } + } + + printf("\n"); + + /* Ethdev node config, skip rx queue mapping */ + ret = rte_node_eth_config(ethdev_conf, nb_conf, nb_graphs); + if (ret) + rte_exit(EXIT_FAILURE, + "rte_node_eth_config: err=%d\n", ret); + + /* start ports */ + RTE_ETH_FOREACH_DEV(portid) { + if ((enabled_port_mask & (1 << portid)) == 0) { + continue; + } + /* Start device */ + ret = rte_eth_dev_start(portid); + if (ret < 0) + rte_exit(EXIT_FAILURE, + "rte_eth_dev_start: err=%d, port=%d\n", + ret, portid); + + /* + * If enabled, put device in promiscuous mode. + * This allows IO forwarding mode to forward packets + * to itself through 2 cross-connected ports of the + * target machine. + */ + if (promiscuous_on) + rte_eth_promiscuous_enable(portid); + } + + printf("\n"); + + check_all_ports_link_status(enabled_port_mask); + + /* Graph Initialization */ + memset(&graph_conf, 0, sizeof(graph_conf)); + graph_conf.node_patterns = node_patterns; + + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { + rte_graph_t graph_id; + rte_edge_t i; + + if (rte_lcore_is_enabled(lcore_id) == 0) + continue; + + qconf = &lcore_conf[lcore_id]; + + /* Skip graph creation if no source exists */ + if (!qconf->n_rx_queue) + continue; + + /* Add rx node patterns of this lcore */ + for (i = 0; i < qconf->n_rx_queue; i++) { + graph_conf.node_patterns[nb_patterns + i] + = qconf->rx_queue_list[i].node_name; + } + + graph_conf.nb_node_patterns = nb_patterns + i; + graph_conf.socket_id = rte_lcore_to_socket_id(lcore_id); + + snprintf(qconf->name, sizeof(qconf->name), + "worker_%u", lcore_id); + + graph_id = rte_graph_create(qconf->name, &graph_conf); + if (graph_id != qconf->graph_id) + rte_exit(EXIT_FAILURE, + "rte_graph_create(): graph_id=%d not " + " as expected for lcore %u(%u\n", + graph_id, lcore_id, qconf->graph_id); + + qconf->graph = rte_graph_lookup(qconf->name); + if (!qconf->graph) + rte_exit(EXIT_FAILURE, + "rte_graph_lookup(): graph %s not found\n", + qconf->name); + + } + + /* Update mac header rewrite data */ + memset(&rewrite_data, 0, sizeof(rewrite_data)); + rewrite_len = sizeof(rewrite_data); + ether_addr = (struct rte_ether_addr *)rewrite_data; + ether_addr[0].addr_bytes[0] = RTE_ETHER_LOCAL_ADMIN_ADDR; + ether_addr[1].addr_bytes[0] = RTE_ETHER_LOCAL_ADMIN_ADDR; + + /* Add route to ip4 graph infra */ + for (i = 0; i < IPV4_L3FWD_LPM_NUM_ROUTES; i++) { + char route_str[INET6_ADDRSTRLEN * 4]; + char abuf[INET6_ADDRSTRLEN]; + struct in_addr in; + uint32_t dst_port; + uint16_t next_hop; + + /* skip unused ports */ + if ((1 << ipv4_l3fwd_lpm_route_array[i].if_out & + enabled_port_mask) == 0) + continue; + + dst_port = ipv4_l3fwd_lpm_route_array[i].if_out; + next_hop = i; + + in.s_addr = htonl(ipv4_l3fwd_lpm_route_array[i].ip); + snprintf(route_str, sizeof(route_str), "%s / %d (%d)", + inet_ntop(AF_INET, &in, abuf, sizeof(abuf)), + ipv4_l3fwd_lpm_route_array[i].depth, + ipv4_l3fwd_lpm_route_array[i].if_out); + + ret = rte_node_ip4_route_add(ipv4_l3fwd_lpm_route_array[i].ip, + ipv4_l3fwd_lpm_route_array[i].depth, next_hop, + IP4_LOOKUP_NEXT_REWRITE); + + if (ret < 0) + rte_exit(EXIT_FAILURE, + "Unable to add ip4 route %s to graph\n", + route_str); + + ether_addr[0].addr_bytes[5] = dst_port + 1; + + /* Add next hop for a given destination */ + ret = rte_node_ip4_rewrite_add(next_hop, rewrite_data, + rewrite_len, dst_port); + if (ret < 0) + rte_exit(EXIT_FAILURE, + "Unable to add next hop %u for " + "route %s\n", next_hop, route_str); + + RTE_LOG(INFO, L3FWD_GRAPH, + "Added route %s, next_hop %u\n", + route_str, next_hop); + } + + /* launch per-lcore init on every slave lcore */ + rte_eal_mp_remote_launch(graph_main_loop, NULL, SKIP_MASTER); + + /* Accumulate and print stats on master until exit */ + if (rte_graph_has_stats_feature()) + print_stats(); + + /* Wait for slave cores to exit */ + ret = 0; + RTE_LCORE_FOREACH_SLAVE(lcore_id) { + ret = rte_eal_wait_lcore(lcore_id); + /* Destroy graph */ + rte_graph_destroy(lcore_conf[lcore_id].name); + if (ret < 0) { + ret = -1; + break; + } + } + + /* stop ports */ + RTE_ETH_FOREACH_DEV(portid) { + if ((enabled_port_mask & (1 << portid)) == 0) + continue; + printf("Closing port %d...", portid); + rte_eth_dev_stop(portid); + rte_eth_dev_close(portid); + printf(" Done\n"); + } + printf("Bye...\n"); + + return ret; +} diff --git a/examples/l3fwd-graph/meson.build b/examples/l3fwd-graph/meson.build new file mode 100644 index 000000000..a816bd890 --- /dev/null +++ b/examples/l3fwd-graph/meson.build @@ -0,0 +1,13 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright(C) 2020 Marvell International Ltd. + +# meson file, for building this example as part of a main DPDK build. +# +# To build this example as a standalone application with an already-installed +# DPDK instance, use 'make' + +deps += ['graph', 'eal', 'lpm', 'ethdev', 'node' ] +sources = files( + 'main.c' +) +allow_experimental_apis = true diff --git a/examples/meson.build b/examples/meson.build index 1f2b6f516..3b540012f 100644 --- a/examples/meson.build +++ b/examples/meson.build @@ -2,8 +2,10 @@ # Copyright(c) 2017-2019 Intel Corporation driver_libs = [] +node_libs = [] if get_option('default_library') == 'static' driver_libs = dpdk_drivers + node_libs = dpdk_graph_nodes endif execinfo = cc.find_library('execinfo', required: false) @@ -23,7 +25,7 @@ all_examples = [ 'l2fwd', 'l2fwd-cat', 'l2fwd-event', 'l2fwd-crypto', 'l2fwd-jobstats', 'l2fwd-keepalive', 'l3fwd', - 'l3fwd-acl', 'l3fwd-power', + 'l3fwd-acl', 'l3fwd-power', 'l3fwd-graph', 'link_status_interrupt', 'multi_process/client_server_mp/mp_client', 'multi_process/client_server_mp/mp_server', @@ -99,7 +101,7 @@ foreach example: examples endif executable('dpdk-' + name, sources, include_directories: includes, - link_whole: driver_libs, + link_whole: driver_libs + node_libs, link_args: dpdk_extra_ldflags, c_args: cflags, dependencies: dep_objs) -- 2.24.1