From: Qi Zhang <qi.z.zhang@intel.com>
To: beilei.xing@intel.com, xiaolong.ye@intel.com
Cc: dev@dpdk.org, Qi Zhang <qi.z.zhang@intel.com>, stable@dpdk.org
Subject: [dpdk-dev] [PATCH] net/ice: remove bulk alloc compile option
Date: Wed, 4 Mar 2020 19:40:38 +0800 [thread overview]
Message-ID: <20200304114038.39644-1-qi.z.zhang@intel.com> (raw)
Remove CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC with below
consideration:
1. a default Rx path can always be selected by setting a proper
rx_free_thresh value at runtime, see
ice_check_rx_burst_bulk_alloc_preconditions.
2. its not a big deal to always reserve more space for desc ring.
"ring_size = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);"
3. Fixes a potential invalid memory access in ice_reset_rx_queue.
if CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC is turned on while
ice_check_rx_burst_bulk_alloc_preconditions return fail.
below code will have problem.
for (i = 0; i < ICE_RX_MAX_BURST; ++i)
rxq->sw_ring[rxq->nb_rx_desc + i].mbuf = &rxq->fake_mbuf;
Fixes: 50370662b727 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
config/common_base | 1 -
doc/guides/nics/ice.rst | 4 ---
drivers/net/ice/ice_rxtx.c | 64 ++++++++++------------------------------------
3 files changed, 13 insertions(+), 56 deletions(-)
diff --git a/config/common_base b/config/common_base
index 7ca2f28b1..c31175f9d 100644
--- a/config/common_base
+++ b/config/common_base
@@ -337,7 +337,6 @@ CONFIG_RTE_LIBRTE_ICE_PMD=y
CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
# Compile burst-oriented IAVF PMD driver
diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
index cde3fd620..8af32dabf 100644
--- a/doc/guides/nics/ice.rst
+++ b/doc/guides/nics/ice.rst
@@ -54,10 +54,6 @@ Please note that enabling debugging options may affect system performance.
Toggle display of generic debugging messages.
-- ``CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC`` (default ``y``)
-
- Toggle bulk allocation for RX.
-
- ``CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC`` (default ``n``)
Toggle to use a 16-byte RX descriptor, by default the RX descriptor is 32 byte.
diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c
index 60c411bfa..c7e5fc484 100644
--- a/drivers/net/ice/ice_rxtx.c
+++ b/drivers/net/ice/ice_rxtx.c
@@ -236,17 +236,15 @@ _ice_rx_queue_release_mbufs(struct ice_rx_queue *rxq)
rxq->sw_ring[i].mbuf = NULL;
}
}
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
- if (rxq->rx_nb_avail == 0)
- return;
- for (i = 0; i < rxq->rx_nb_avail; i++) {
- struct rte_mbuf *mbuf;
-
- mbuf = rxq->rx_stage[rxq->rx_next_avail + i];
- rte_pktmbuf_free_seg(mbuf);
- }
- rxq->rx_nb_avail = 0;
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
+ if (rxq->rx_nb_avail == 0)
+ return;
+ for (i = 0; i < rxq->rx_nb_avail; i++) {
+ struct rte_mbuf *mbuf;
+
+ mbuf = rxq->rx_stage[rxq->rx_next_avail + i];
+ rte_pktmbuf_free_seg(mbuf);
+ }
+ rxq->rx_nb_avail = 0;
}
static void
@@ -309,16 +307,10 @@ ice_switch_rx_queue(struct ice_hw *hw, uint16_t q_idx, bool on)
}
static inline int
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
ice_check_rx_burst_bulk_alloc_preconditions(struct ice_rx_queue *rxq)
-#else
-ice_check_rx_burst_bulk_alloc_preconditions
- (__rte_unused struct ice_rx_queue *rxq)
-#endif
{
int ret = 0;
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
if (!(rxq->rx_free_thresh >= ICE_RX_MAX_BURST)) {
PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions: "
"rxq->rx_free_thresh=%d, "
@@ -338,9 +330,6 @@ ice_check_rx_burst_bulk_alloc_preconditions
rxq->nb_rx_desc, rxq->rx_free_thresh);
ret = -EINVAL;
}
-#else
- ret = -EINVAL;
-#endif
return ret;
}
@@ -357,17 +346,11 @@ ice_reset_rx_queue(struct ice_rx_queue *rxq)
return;
}
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
- if (ice_check_rx_burst_bulk_alloc_preconditions(rxq) == 0)
- len = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);
- else
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
- len = rxq->nb_rx_desc;
+ len = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);
for (i = 0; i < len * sizeof(union ice_rx_flex_desc); i++)
((volatile char *)rxq->rx_ring)[i] = 0;
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
memset(&rxq->fake_mbuf, 0x0, sizeof(rxq->fake_mbuf));
for (i = 0; i < ICE_RX_MAX_BURST; ++i)
rxq->sw_ring[rxq->nb_rx_desc + i].mbuf = &rxq->fake_mbuf;
@@ -375,7 +358,6 @@ ice_reset_rx_queue(struct ice_rx_queue *rxq)
rxq->rx_nb_avail = 0;
rxq->rx_next_avail = 0;
rxq->rx_free_trigger = (uint16_t)(rxq->rx_free_thresh - 1);
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
rxq->rx_tail = 0;
rxq->nb_rx_hold = 0;
@@ -926,13 +908,11 @@ ice_rx_queue_setup(struct rte_eth_dev *dev,
/* Allocate the maximun number of RX ring hardware descriptor. */
len = ICE_MAX_RING_DESC;
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
/**
* Allocating a little more memory because vectorized/bulk_alloc Rx
* functions doesn't check boundaries each time.
*/
len += ICE_RX_MAX_BURST;
-#endif
/* Allocate the maximum number of RX ring hardware descriptor. */
ring_size = sizeof(union ice_rx_flex_desc) * len;
@@ -952,11 +932,8 @@ ice_rx_queue_setup(struct rte_eth_dev *dev,
rxq->rx_ring_dma = rz->iova;
rxq->rx_ring = rz->addr;
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
+ /* always reserve more for bulk alloc */
len = (uint16_t)(nb_desc + ICE_RX_MAX_BURST);
-#else
- len = nb_desc;
-#endif
/* Allocate the software ring. */
rxq->sw_ring = rte_zmalloc_socket(NULL,
@@ -977,17 +954,14 @@ ice_rx_queue_setup(struct rte_eth_dev *dev,
use_def_burst_func = ice_check_rx_burst_bulk_alloc_preconditions(rxq);
if (!use_def_burst_func) {
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions are "
"satisfied. Rx Burst Bulk Alloc function will be "
"used on port=%d, queue=%d.",
rxq->port_id, rxq->queue_id);
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
} else {
PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions are "
- "not satisfied, Scattered Rx is requested, "
- "or RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC is "
- "not enabled on port=%d, queue=%d.",
+ "not satisfied, Scattered Rx is requested. "
+ "on port=%d, queue=%d.",
rxq->port_id, rxq->queue_id);
ad->rx_bulk_alloc_allowed = false;
}
@@ -1399,7 +1373,6 @@ ice_rxd_to_pkt_fields(struct rte_mbuf *mb,
#endif
}
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
#define ICE_LOOK_AHEAD 8
#if (ICE_LOOK_AHEAD != 8)
#error "PMD ICE: ICE_LOOK_AHEAD must be 8\n"
@@ -1620,15 +1593,6 @@ ice_recv_pkts_bulk_alloc(void *rx_queue,
return nb_rx;
}
-#else
-static uint16_t
-ice_recv_pkts_bulk_alloc(void __rte_unused *rx_queue,
- struct rte_mbuf __rte_unused **rx_pkts,
- uint16_t __rte_unused nb_pkts)
-{
- return 0;
-}
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
static uint16_t
ice_recv_scattered_pkts(void *rx_queue,
@@ -1872,9 +1836,7 @@ ice_dev_supported_ptypes_get(struct rte_eth_dev *dev)
ptypes = ptypes_os;
if (dev->rx_pkt_burst == ice_recv_pkts ||
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
dev->rx_pkt_burst == ice_recv_pkts_bulk_alloc ||
-#endif
dev->rx_pkt_burst == ice_recv_scattered_pkts)
return ptypes;
--
2.13.6
next reply other threads:[~2020-03-04 11:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-04 11:40 Qi Zhang [this message]
2020-03-06 8:46 ` Ye Xiaolong
2020-03-06 23:29 ` Zhang, Qi Z
2020-03-08 4:13 ` Ye Xiaolong
-- strict thread matches above, loose matches on Subject: below --
2020-03-04 11:39 Qi Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200304114038.39644-1-qi.z.zhang@intel.com \
--to=qi.z.zhang@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=stable@dpdk.org \
--cc=xiaolong.ye@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).