DPDK patches and discussions
 help / color / mirror / Atom feed
From: Bill Zhou <dongz@mellanox.com>
To: ferruh.yigit@intel.com, matan@mellanox.com, wenzhuo.lu@intel.com,
	beilei.xing@intel.com, bernard.iremonger@intel.com,
	orika@mellanox.com, john.mcnamara@intel.com,
	marko.kovacevic@intel.com
Cc: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4] app/testpmd: support flow aging
Date: Sun,  3 May 2020 11:59:48 +0300	[thread overview]
Message-ID: <20200503085948.27167-1-dongz@mellanox.com> (raw)
In-Reply-To: <20200502140023.5274-1-dongz@mellanox.com>

Currently, there is no way to check the aging event or to get the current
aged flows in testpmd, this patch include those implements, it's included:

- Add new item "flow_aged" to the current print event command arguments.
- Add new command to list all aged flows, meanwhile, we can set parameter
  to destroy it.

Signed-off-by: Bill Zhou <dongz@mellanox.com>
---
v2: Update the way of registering aging event, add new command to control
if the event need be print or not. Update the output of the delete aged
flow command format.
v3: Change the command from only set aged flow output to set one gloable
verbose bitmap for all events output.
v4: Add the event output to current global print event arguments.
---
 app/test-pmd/cmdline.c                      |   4 +
 app/test-pmd/cmdline_flow.c                 |  62 +++++++++++
 app/test-pmd/config.c                       | 108 ++++++++++++++++++--
 app/test-pmd/parameters.c                   |   6 +-
 app/test-pmd/testpmd.c                      |   4 +-
 app/test-pmd/testpmd.h                      |   3 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  62 +++++++++++
 7 files changed, 235 insertions(+), 14 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 1375f223eb..bcf9080c48 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1125,6 +1125,10 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"    Restrict ingress traffic to the defined"
 			" flow rules\n\n"
 
+			"flow aged {port_id} [destroy]\n"
+			"    List and destroy aged flows"
+			" flow rules\n\n"
+
 			"set vxlan ip-version (ipv4|ipv6) vni (vni) udp-src"
 			" (udp-src) udp-dst (udp-dst) ip-src (ip-src) ip-dst"
 			" (ip-dst) eth-src (eth-src) eth-dst (eth-dst)\n"
diff --git a/app/test-pmd/cmdline_flow.c b/app/test-pmd/cmdline_flow.c
index 45bcff3cf5..4e2006c543 100644
--- a/app/test-pmd/cmdline_flow.c
+++ b/app/test-pmd/cmdline_flow.c
@@ -67,6 +67,7 @@ enum index {
 	DUMP,
 	QUERY,
 	LIST,
+	AGED,
 	ISOLATE,
 
 	/* Destroy arguments. */
@@ -78,6 +79,9 @@ enum index {
 	/* List arguments. */
 	LIST_GROUP,
 
+	/* Destroy aged flow arguments. */
+	AGED_DESTROY,
+
 	/* Validate/create arguments. */
 	GROUP,
 	PRIORITY,
@@ -664,6 +668,9 @@ struct buffer {
 		struct {
 			int set;
 		} isolate; /**< Isolated mode arguments. */
+		struct {
+			int destroy;
+		} aged; /**< Aged arguments. */
 	} args; /**< Command arguments. */
 };
 
@@ -719,6 +726,12 @@ static const enum index next_list_attr[] = {
 	ZERO,
 };
 
+static const enum index next_aged_attr[] = {
+	AGED_DESTROY,
+	END,
+	ZERO,
+};
+
 static const enum index item_param[] = {
 	ITEM_PARAM_IS,
 	ITEM_PARAM_SPEC,
@@ -1466,6 +1479,9 @@ static int parse_action(struct context *, const struct token *,
 static int parse_list(struct context *, const struct token *,
 		      const char *, unsigned int,
 		      void *, unsigned int);
+static int parse_aged(struct context *, const struct token *,
+		      const char *, unsigned int,
+		      void *, unsigned int);
 static int parse_isolate(struct context *, const struct token *,
 			 const char *, unsigned int,
 			 void *, unsigned int);
@@ -1649,6 +1665,7 @@ static const struct token token_list[] = {
 			      FLUSH,
 			      DUMP,
 			      LIST,
+			      AGED,
 			      QUERY,
 			      ISOLATE)),
 		.call = parse_init,
@@ -1708,6 +1725,13 @@ static const struct token token_list[] = {
 		.args = ARGS(ARGS_ENTRY(struct buffer, port)),
 		.call = parse_list,
 	},
+	[AGED] = {
+		.name = "aged",
+		.help = "list and destroy aged flows",
+		.next = NEXT(next_aged_attr, NEXT_ENTRY(PORT_ID)),
+		.args = ARGS(ARGS_ENTRY(struct buffer, port)),
+		.call = parse_aged,
+	},
 	[ISOLATE] = {
 		.name = "isolate",
 		.help = "restrict ingress traffic to the defined flow rules",
@@ -1741,6 +1765,12 @@ static const struct token token_list[] = {
 		.args = ARGS(ARGS_ENTRY_PTR(struct buffer, args.list.group)),
 		.call = parse_list,
 	},
+	[AGED_DESTROY] = {
+		.name = "destroy",
+		.help = "specify aged flows need be destroyed",
+		.call = parse_aged,
+		.comp = comp_none,
+	},
 	/* Validate/create attributes. */
 	[GROUP] = {
 		.name = "group",
@@ -5367,6 +5397,35 @@ parse_list(struct context *ctx, const struct token *token,
 	return len;
 }
 
+/** Parse tokens for list all aged flows command. */
+static int
+parse_aged(struct context *ctx, const struct token *token,
+	   const char *str, unsigned int len,
+	   void *buf, unsigned int size)
+{
+	struct buffer *out = buf;
+
+	/* Token name must match. */
+	if (parse_default(ctx, token, str, len, NULL, 0) < 0)
+		return -1;
+	/* Nothing else to do if there is no buffer. */
+	if (!out)
+		return len;
+	if (!out->command) {
+		if (ctx->curr != AGED)
+			return -1;
+		if (sizeof(*out) > size)
+			return -1;
+		out->command = ctx->curr;
+		ctx->objdata = 0;
+		ctx->object = out;
+		ctx->objmask = NULL;
+	}
+	if (ctx->curr == AGED_DESTROY)
+		out->args.aged.destroy = 1;
+	return len;
+}
+
 /** Parse tokens for isolate command. */
 static int
 parse_isolate(struct context *ctx, const struct token *token,
@@ -6367,6 +6426,9 @@ cmd_flow_parsed(const struct buffer *in)
 	case ISOLATE:
 		port_flow_isolate(in->port, in->args.isolate.set);
 		break;
+	case AGED:
+		port_flow_aged(in->port, in->args.aged.destroy);
+		break;
 	default:
 		break;
 	}
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 72f25d1521..035d336ab5 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1367,6 +1367,26 @@ port_flow_validate(portid_t port_id,
 	return 0;
 }
 
+/** Update age action context by port_flow pointer. */
+void
+update_age_action_context(const struct rte_flow_action *actions,
+			struct port_flow *pf)
+{
+	struct rte_flow_action_age *age = NULL;
+
+	for (; actions->type != RTE_FLOW_ACTION_TYPE_END; actions++) {
+		switch (actions->type) {
+		case RTE_FLOW_ACTION_TYPE_AGE:
+			age = (struct rte_flow_action_age *)
+				(uintptr_t)actions->conf;
+			age->context = pf;
+			return;
+		default:
+			break;
+		}
+	}
+}
+
 /** Create flow rule. */
 int
 port_flow_create(portid_t port_id,
@@ -1377,28 +1397,27 @@ port_flow_create(portid_t port_id,
 	struct rte_flow *flow;
 	struct rte_port *port;
 	struct port_flow *pf;
-	uint32_t id;
+	uint32_t id = 0;
 	struct rte_flow_error error;
 
-	/* Poisoning to make sure PMDs update it in case of error. */
-	memset(&error, 0x22, sizeof(error));
-	flow = rte_flow_create(port_id, attr, pattern, actions, &error);
-	if (!flow)
-		return port_flow_complain(&error);
 	port = &ports[port_id];
 	if (port->flow_list) {
 		if (port->flow_list->id == UINT32_MAX) {
 			printf("Highest rule ID is already assigned, delete"
 			       " it first");
-			rte_flow_destroy(port_id, flow, NULL);
 			return -ENOMEM;
 		}
 		id = port->flow_list->id + 1;
-	} else
-		id = 0;
+	}
 	pf = port_flow_new(attr, pattern, actions, &error);
-	if (!pf) {
-		rte_flow_destroy(port_id, flow, NULL);
+	if (!pf)
+		return port_flow_complain(&error);
+	update_age_action_context(actions, pf);
+	/* Poisoning to make sure PMDs update it in case of error. */
+	memset(&error, 0x22, sizeof(error));
+	flow = rte_flow_create(port_id, attr, pattern, actions, &error);
+	if (!flow) {
+		free(pf);
 		return port_flow_complain(&error);
 	}
 	pf->next = port->flow_list;
@@ -1570,6 +1589,73 @@ port_flow_query(portid_t port_id, uint32_t rule,
 	return 0;
 }
 
+/** List simply and destroy all aged flows. */
+void
+port_flow_aged(portid_t port_id, uint8_t destroy)
+{
+	void **contexts;
+	int nb_context, total = 0, idx;
+	struct rte_flow_error error;
+	struct port_flow *pf;
+
+	if (port_id_is_invalid(port_id, ENABLED_WARN) ||
+	    port_id == (portid_t)RTE_PORT_ALL)
+		return;
+	total = rte_flow_get_aged_flows(port_id, NULL, 0, &error);
+	printf("Port %u total aged flows: %d\n", port_id, total);
+	if (total < 0) {
+		port_flow_complain(&error);
+		return;
+	}
+	if (total == 0)
+		return;
+	contexts = malloc(sizeof(void *) * total);
+	if (contexts == NULL) {
+		printf("Cannot allocate contexts for aged flow\n");
+		return;
+	}
+	printf("ID\tGroup\tPrio\tAttr\n");
+	nb_context = rte_flow_get_aged_flows(port_id, contexts, total, &error);
+	if (nb_context != total) {
+		printf("Port:%d get aged flows count(%d) != total(%d)\n",
+			port_id, nb_context, total);
+		free(contexts);
+		return;
+	}
+	for (idx = 0; idx < nb_context; idx++) {
+		pf = (struct port_flow *)contexts[idx];
+		if (!pf) {
+			printf("Error: get Null context in port %u\n", port_id);
+			continue;
+		}
+		printf("%" PRIu32 "\t%" PRIu32 "\t%" PRIu32 "\t%c%c%c\t\n",
+		       pf->id,
+		       pf->rule.attr->group,
+		       pf->rule.attr->priority,
+		       pf->rule.attr->ingress ? 'i' : '-',
+		       pf->rule.attr->egress ? 'e' : '-',
+		       pf->rule.attr->transfer ? 't' : '-');
+	}
+	if (destroy) {
+		int ret;
+		uint32_t flow_id;
+
+		total = 0;
+		printf("\n");
+		for (idx = 0; idx < nb_context; idx++) {
+			pf = (struct port_flow *)contexts[idx];
+			if (!pf)
+				continue;
+			flow_id = pf->id;
+			ret = port_flow_destroy(port_id, 1, &flow_id);
+			if (!ret)
+				total++;
+		}
+		printf("%d flows be destroyed\n", total);
+	}
+	free(contexts);
+}
+
 /** List flow rules. */
 void
 port_flow_list(portid_t port_id, uint32_t n, const uint32_t group[n])
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 30c1753c32..92b5575626 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -187,9 +187,9 @@ usage(char* progname)
 	printf("  --no-rmv-interrupt: disable device removal interrupt.\n");
 	printf("  --bitrate-stats=N: set the logical core N to perform "
 		"bit-rate calculation.\n");
-	printf("  --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
+	printf("  --print-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
 	       "enable print of designated event or all of them.\n");
-	printf("  --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|all>: "
+	printf("  --mask-event <unknown|intr_lsc|queue_state|intr_reset|vf_mbox|macsec|intr_rmv|flow_aged|all>: "
 	       "disable print of designated event or all of them.\n");
 	printf("  --flow-isolate-all: "
 	       "requests flow API isolated mode on all ports at initialization time.\n");
@@ -545,6 +545,8 @@ parse_event_printing_config(const char *optarg, int enable)
 		mask = UINT32_C(1) << RTE_ETH_EVENT_NEW;
 	else if (!strcmp(optarg, "dev_released"))
 		mask = UINT32_C(1) << RTE_ETH_EVENT_DESTROY;
+	else if (!strcmp(optarg, "flow_aged"))
+		mask = UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED;
 	else if (!strcmp(optarg, "all"))
 		mask = ~UINT32_C(0);
 	else {
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index 99bacddbfd..a2d0be56b3 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -375,6 +375,7 @@ static const char * const eth_event_desc[] = {
 	[RTE_ETH_EVENT_INTR_RMV] = "device removal",
 	[RTE_ETH_EVENT_NEW] = "device probed",
 	[RTE_ETH_EVENT_DESTROY] = "device released",
+	[RTE_ETH_EVENT_FLOW_AGED] = "flow aged",
 	[RTE_ETH_EVENT_MAX] = NULL,
 };
 
@@ -388,7 +389,8 @@ uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
 			    (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
 			    (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) |
 			    (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
-			    (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
+			    (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV) |
+			    (UINT32_C(1) << RTE_ETH_EVENT_FLOW_AGED);
 /*
  * Decide if all memory are locked for performance.
  */
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 7ff4c5dba3..fb391672a8 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -747,12 +747,15 @@ int port_flow_create(portid_t port_id,
 		     const struct rte_flow_attr *attr,
 		     const struct rte_flow_item *pattern,
 		     const struct rte_flow_action *actions);
+void update_age_action_context(const struct rte_flow_action *actions,
+		     struct port_flow *pf);
 int port_flow_destroy(portid_t port_id, uint32_t n, const uint32_t *rule);
 int port_flow_flush(portid_t port_id);
 int port_flow_dump(portid_t port_id, const char *file_name);
 int port_flow_query(portid_t port_id, uint32_t rule,
 		    const struct rte_flow_action *action);
 void port_flow_list(portid_t port_id, uint32_t n, const uint32_t *group);
+void port_flow_aged(portid_t port_id, uint8_t destroy);
 int port_flow_isolate(portid_t port_id, int set);
 
 void rx_ring_desc_display(portid_t port_id, queueid_t rxq_id, uint16_t rxd_id);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a360ecccfd..19260cc2d9 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -3616,6 +3616,10 @@ following sections.
 
    flow dump {port_id} {output_file}
 
+- List and destroy aged flow rules::
+
+   flow aged {port_id} [destroy]
+
 Validating flow rules
 ~~~~~~~~~~~~~~~~~~~~~
 
@@ -4503,6 +4507,64 @@ Otherwise, it will complain error occurred::
 
    Caught error type [...] ([...]): [...]
 
+Listing and destroying aged flow rules
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+``flow aged`` simply lists aged flow rules be get from api ``rte_flow_get_aged_flows``,
+and ``destroy`` parameter can be used to destroy those flow rules in PMD.
+
+   flow aged {port_id} [destroy]
+
+Listing current aged flow rules::
+
+   testpmd> flow aged 0
+   Port 0 total aged flows: 0
+   testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.14 / end
+      actions age timeout 5 / queue index 0 /  end
+   Flow rule #0 created
+   testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.15 / end
+      actions age timeout 4 / queue index 0 /  end
+   Flow rule #1 created
+   testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.16 / end
+      actions age timeout 2 / queue index 0 /  end
+   Flow rule #2 created
+   testpmd> flow create 0 ingress pattern eth / ipv4 src is 2.2.2.17 / end
+      actions age timeout 3 / queue index 0 /  end
+   Flow rule #3 created
+
+
+Aged Rules are simply list as command ``flow list {port_id}``, but strip the detail rule
+information, all the aged flows are sorted by the longest timeout time. For example, if
+those rules be configured in the same time, ID 2 will be the first aged out rule, the next
+will be ID 3, ID 1, ID 0::
+
+   testpmd> flow aged 0
+   Port 0 total aged flows: 4
+   ID      Group   Prio    Attr
+   2       0       0       i--
+   3       0       0       i--
+   1       0       0       i--
+   0       0       0       i--
+
+If attach ``destroy`` parameter, the command will destroy all the list aged flow rules.
+
+   testpmd> flow aged 0 destroy
+   Port 0 total aged flows: 4
+   ID      Group   Prio    Attr
+   2       0       0       i--
+   3       0       0       i--
+   1       0       0       i--
+   0       0       0       i--
+
+   Flow rule #2 destroyed
+   Flow rule #3 destroyed
+   Flow rule #1 destroyed
+   Flow rule #0 destroyed
+   4 flows be destroyed
+   testpmd> flow aged 0
+   Port 0 total aged flows: 0
+
+
 Sample QinQ flow rules
 ~~~~~~~~~~~~~~~~~~~~~~
 
-- 
2.21.0


  reply	other threads:[~2020-05-03  8:59 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-24 10:55 [dpdk-dev] [PATCH] " Bill Zhou
2020-04-24 16:25 ` Ferruh Yigit
2020-04-26  7:23   ` Bill Zhou
2020-04-27 14:13     ` Ferruh Yigit
2020-04-27 15:12       ` Matan Azrad
2020-04-30 22:26         ` Ferruh Yigit
2020-04-30 15:53 ` [dpdk-dev] [PATCH v2] " Bill Zhou
2020-04-30 22:43   ` Ferruh Yigit
2020-05-01  6:51     ` Matan Azrad
2020-05-01  9:27       ` Ferruh Yigit
2020-05-01 11:28         ` Matan Azrad
2020-05-01 11:54           ` Ferruh Yigit
2020-05-01 12:45             ` Matan Azrad
2020-05-01 13:38               ` Ferruh Yigit
2020-05-01 15:14                 ` Matan Azrad
2020-05-01 15:44                   ` Ferruh Yigit
2020-05-02 14:00   ` [dpdk-dev] [PATCH v3] " Bill Zhou
2020-05-03  8:59     ` Bill Zhou [this message]
2020-05-03  9:46       ` [dpdk-dev] [PATCH v4] " Matan Azrad
2020-05-03 14:58       ` Ori Kam
2020-05-05  8:37       ` Ferruh Yigit
2020-05-05  9:11         ` Matan Azrad
2020-05-05  9:23           ` Ferruh Yigit
2020-05-05  9:49       ` [dpdk-dev] [PATCH v5] " Bill Zhou
2020-05-05 10:09         ` Ori Kam
2020-05-05 15:11           ` Ferruh Yigit
2020-05-06  8:04             ` Matan Azrad

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200503085948.27167-1-dongz@mellanox.com \
    --to=dongz@mellanox.com \
    --cc=beilei.xing@intel.com \
    --cc=bernard.iremonger@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=john.mcnamara@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=matan@mellanox.com \
    --cc=orika@mellanox.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).