DPDK patches and discussions
 help / color / mirror / Atom feed
From: Kalesh A P <kalesh-anakkur.purayil@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, ajit.khaparde@broadcom.com
Subject: [dpdk-dev]  [PATCH 1/2] net/bnxt: fix the check for validating link speed
Date: Fri, 22 May 2020 23:02:53 +0530
Message-ID: <20200522173254.18643-2-kalesh-anakkur.purayil@broadcom.com> (raw)
In-Reply-To: <20200522173254.18643-1-kalesh-anakkur.purayil@broadcom.com>

From: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>

bnxt PMD uses the macro BNXT_SUPPORTED_SPEEDS to validate
the user requested speed. But this has all the speed values
supported by the PMD and is not chip specific.

The check against this macro returns success when the user
tries set the speed to 100G on a port even if the chip does
not support 100G speed.

Fixed it to use bnxt_get_speed_capabilities() to check the
supported speeds by the chip.

Fixes: 1d0704f4d793 ("net/bnxt: add device configure operation")
Cc: stable@dpdk.org

Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
 drivers/net/bnxt/bnxt.h        |  1 +
 drivers/net/bnxt/bnxt_ethdev.c |  2 +-
 drivers/net/bnxt/bnxt_hwrm.c   | 14 +++++++++-----
 3 files changed, 11 insertions(+), 6 deletions(-)

diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h
index 446764c..2c3aef6 100644
--- a/drivers/net/bnxt/bnxt.h
+++ b/drivers/net/bnxt/bnxt.h
@@ -780,4 +780,5 @@ void bnxt_cancel_fc_thread(struct bnxt *bp);
 void bnxt_flow_cnt_alarm_cb(void *arg);
 int bnxt_flow_stats_req(struct bnxt *bp);
 int bnxt_flow_stats_cnt(struct bnxt *bp);
+uint32_t bnxt_get_speed_capabilities(struct bnxt *bp);
 #endif
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index ae495da..e635781 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -778,7 +778,7 @@ static int bnxt_shutdown_nic(struct bnxt *bp)
  * Device configuration and status function
  */
 
-static uint32_t bnxt_get_speed_capabilities(struct bnxt *bp)
+uint32_t bnxt_get_speed_capabilities(struct bnxt *bp)
 {
 	uint32_t link_speed = bp->link_info->support_speeds;
 	uint32_t speed_capa = 0;
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index c1798b5..945bc90 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -2788,13 +2788,18 @@ static uint16_t bnxt_parse_eth_link_speed(uint32_t conf_link_speed)
 		ETH_LINK_SPEED_40G | ETH_LINK_SPEED_50G | \
 		ETH_LINK_SPEED_100G | ETH_LINK_SPEED_200G)
 
-static int bnxt_valid_link_speed(uint32_t link_speed, uint16_t port_id)
+static int bnxt_validate_link_speed(struct bnxt *bp)
 {
+	uint32_t link_speed = bp->eth_dev->data->dev_conf.link_speeds;
+	uint16_t port_id = bp->eth_dev->data->port_id;
+	uint32_t link_speed_capa;
 	uint32_t one_speed;
 
 	if (link_speed == ETH_LINK_SPEED_AUTONEG)
 		return 0;
 
+	link_speed_capa = bnxt_get_speed_capabilities(bp);
+
 	if (link_speed & ETH_LINK_SPEED_FIXED) {
 		one_speed = link_speed & ~ETH_LINK_SPEED_FIXED;
 
@@ -2804,14 +2809,14 @@ static int bnxt_valid_link_speed(uint32_t link_speed, uint16_t port_id)
 				link_speed, port_id);
 			return -EINVAL;
 		}
-		if ((one_speed & BNXT_SUPPORTED_SPEEDS) != one_speed) {
+		if ((one_speed & link_speed_capa) != one_speed) {
 			PMD_DRV_LOG(ERR,
 				"Unsupported advertised speed (%u) for port %u\n",
 				link_speed, port_id);
 			return -EINVAL;
 		}
 	} else {
-		if (!(link_speed & BNXT_SUPPORTED_SPEEDS)) {
+		if (!(link_speed & link_speed_capa)) {
 			PMD_DRV_LOG(ERR,
 				"Unsupported advertised speeds (%u) for port %u\n",
 				link_speed, port_id);
@@ -2957,8 +2962,7 @@ int bnxt_set_hwrm_link_config(struct bnxt *bp, bool link_up)
 	if (!BNXT_SINGLE_PF(bp) || BNXT_VF(bp))
 		return 0;
 
-	rc = bnxt_valid_link_speed(dev_conf->link_speeds,
-			bp->eth_dev->data->port_id);
+	rc = bnxt_validate_link_speed(bp);
 	if (rc)
 		goto error;
 
-- 
2.10.1


  reply	other threads:[~2020-05-22 17:17 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22 17:32 [dpdk-dev] [PATCH 0/2] bnxt bug fixes Kalesh A P
2020-05-22 17:32 ` Kalesh A P [this message]
2020-05-22 17:42   ` [dpdk-dev] [PATCH v2 0/2] bnxt fixes Kalesh A P
2020-05-22 17:42     ` [dpdk-dev] [PATCH v2 1/2] net/bnxt: fix the check for validating link speed Kalesh A P
2020-05-22 17:42     ` [dpdk-dev] [PATCH v2 2/2] net/bnxt: performance fix for Arm Kalesh A P
2020-05-22 21:22     ` [dpdk-dev] [PATCH v2 0/2] bnxt fixes Ajit Khaparde
2020-05-22 17:32 ` [dpdk-dev] [PATCH 2/2] net/bnxt: performance fix for ARM Kalesh A P

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200522173254.18643-2-kalesh-anakkur.purayil@broadcom.com \
    --to=kalesh-anakkur.purayil@broadcom.com \
    --cc=ajit.khaparde@broadcom.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git