From: Harman Kalra <hkalra@marvell.com>
To: "Wei Hu (Xavier)" <xavier.huwei@huawei.com>
Cc: <beilei.xing@intel.com>, <jia.guo@intel.com>,
<xiao.w.wang@intel.com>, <qi.z.zhang@intel.com>,
<heinrich.kuhn@netronome.com>, <jerinj@marvell.com>,
<ndabilpuram@marvell.com>, <kirankumark@marvell.com>,
<rmody@marvell.com>, <shshaikh@marvell.com>,
"dev@dpdk.org" <dev@dpdk.org>
Subject: Re: [dpdk-dev] [EXT] Re: [PATCH v4 2/2] ethdev: fix VLAN offloads set if no relative capabilities
Date: Mon, 29 Jun 2020 20:17:09 +0530 [thread overview]
Message-ID: <20200629144708.GA193041@outlook.office365.com> (raw)
In-Reply-To: <b978008d-e5e7-7e79-7335-6e6ed386161f@huawei.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
On Mon, Jun 29, 2020 at 09:34:00AM +0800, Wei Hu (Xavier) wrote:
> External Email
>
> ----------------------------------------------------------------------
> Hi, Heinrich Kuhn & Harman Kalra & Jerin Jacob & Nithin Dabilpuram & Kiran
> Kumar K &
>
> Rasesh Mody & Shahed Shaikh & Qi Zhang & Xiao Wang & Beilei Xing & Jeff Guo.
>
> Could you please help to review this patch and give 'Acked-by' if there are
> no objects.
>
> Thanks, Xavier
>
> On 2020/6/22 16:09, Wei Hu (Xavier) wrote:
> > Currently, there is a potential problem that calling the API function
> > rte_eth_dev_set_vlan_offload to start VLAN hardware offloads which the
> > driver does not support. If the PMD driver does not support certain VLAN
> > hardware offloads and does not check for it, the hardware setting will
> > not change, but the VLAN offloads in dev->data->dev_conf.rxmode.offloads
> > will be turned on.
> >
> > It is supposed to check the hardware capabilities to decide whether the
> > relative callback needs to be called just like the behavior in the API
> > function named rte_eth_dev_configure. And it is also needed to cleanup
> > duplicated checks which are done in some PMDs. Also, note that it is
> > behaviour change for some PMDs which simply ignore (with error/warning log
> > message) unsupported VLAN offloads, but now it will fail.
> >
> > Fixes: a4996bd89c42 ("ethdev: new Rx/Tx offloads API")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
> > Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
> > Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
> > Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
> > ---
> > v3 -> v4: Delete "next_mask" label and modify the function that when the
> > offload is not supported the function fail.
> > v2 -> v3: Add __rte_unused to avoid unused parameter 'dev' and 'mask'
> > warning.
> > v1 -> v2: Cleanup duplicated checks which are done in some PMDs.
> > ---
> > drivers/net/dpaa2/dpaa2_ethdev.c | 12 +++---------
> > drivers/net/enic/enic_ethdev.c | 12 ------------
> > drivers/net/fm10k/fm10k_ethdev.c | 23 ++---------------------
> > drivers/net/hinic/hinic_pmd_ethdev.c | 6 ------
> > drivers/net/i40e/i40e_ethdev.c | 5 -----
> > drivers/net/nfp/nfp_net.c | 5 -----
> > drivers/net/octeontx/octeontx_ethdev_ops.c | 10 ----------
> > drivers/net/octeontx2/otx2_vlan.c | 5 -----
> > drivers/net/qede/qede_ethdev.c | 3 ---
> > lib/librte_ethdev/rte_ethdev.c | 21 +++++++++++++++++++++
> > 10 files changed, 26 insertions(+), 76 deletions(-)
> >
> > diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c
> > index 2f031ec..17a7a49 100644
> > --- a/drivers/net/dpaa2/dpaa2_ethdev.c
> > +++ b/drivers/net/dpaa2/dpaa2_ethdev.c
> > @@ -147,7 +147,7 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> > {
> > struct dpaa2_dev_priv *priv = dev->data->dev_private;
> > struct fsl_mc_io *dpni = dev->process_private;
> > - int ret;
> > + int ret = 0;
> > PMD_INIT_FUNC_TRACE();
> > @@ -155,7 +155,7 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> > /* VLAN Filter not avaialble */
> > if (!priv->max_vlan_filters) {
> > DPAA2_PMD_INFO("VLAN filter not available");
> > - goto next_mask;
> > + return -ENOTSUP;
> > }
> > if (dev->data->dev_conf.rxmode.offloads &
> > @@ -168,14 +168,8 @@ dpaa2_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> > if (ret < 0)
> > DPAA2_PMD_INFO("Unable to set vlan filter = %d", ret);
> > }
> > -next_mask:
> > - if (mask & ETH_VLAN_EXTEND_MASK) {
> > - if (dev->data->dev_conf.rxmode.offloads &
> > - DEV_RX_OFFLOAD_VLAN_EXTEND)
> > - DPAA2_PMD_INFO("VLAN extend offload not supported");
> > - }
> > - return 0;
> > + return ret;
> > }
> > static int
> > diff --git a/drivers/net/enic/enic_ethdev.c b/drivers/net/enic/enic_ethdev.c
> > index 32d5397..ef8900d 100644
> > --- a/drivers/net/enic/enic_ethdev.c
> > +++ b/drivers/net/enic/enic_ethdev.c
> > @@ -374,18 +374,6 @@ static int enicpmd_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
> > enic->ig_vlan_strip_en = 0;
> > }
> > - if ((mask & ETH_VLAN_FILTER_MASK) &&
> > - (offloads & DEV_RX_OFFLOAD_VLAN_FILTER)) {
> > - dev_warning(enic,
> > - "Configuration of VLAN filter is not supported\n");
> > - }
> > -
> > - if ((mask & ETH_VLAN_EXTEND_MASK) &&
> > - (offloads & DEV_RX_OFFLOAD_VLAN_EXTEND)) {
> > - dev_warning(enic,
> > - "Configuration of extended VLAN is not supported\n");
> > - }
> > -
> > return enic_set_vlan_strip(enic);
> > }
> > diff --git a/drivers/net/fm10k/fm10k_ethdev.c b/drivers/net/fm10k/fm10k_ethdev.c
> > index f537ab2..f5b854e 100644
> > --- a/drivers/net/fm10k/fm10k_ethdev.c
> > +++ b/drivers/net/fm10k/fm10k_ethdev.c
> > @@ -1575,28 +1575,9 @@ fm10k_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
> > }
> > static int
> > -fm10k_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> > +fm10k_vlan_offload_set(struct rte_eth_dev *dev __rte_unused,
> > + int mask __rte_unused)
> > {
> > - if (mask & ETH_VLAN_STRIP_MASK) {
> > - if (!(dev->data->dev_conf.rxmode.offloads &
> > - DEV_RX_OFFLOAD_VLAN_STRIP))
> > - PMD_INIT_LOG(ERR, "VLAN stripping is "
> > - "always on in fm10k");
> > - }
> > -
> > - if (mask & ETH_VLAN_EXTEND_MASK) {
> > - if (dev->data->dev_conf.rxmode.offloads &
> > - DEV_RX_OFFLOAD_VLAN_EXTEND)
> > - PMD_INIT_LOG(ERR, "VLAN QinQ is not "
> > - "supported in fm10k");
> > - }
> > -
> > - if (mask & ETH_VLAN_FILTER_MASK) {
> > - if (!(dev->data->dev_conf.rxmode.offloads &
> > - DEV_RX_OFFLOAD_VLAN_FILTER))
> > - PMD_INIT_LOG(ERR, "VLAN filter is always on in fm10k");
> > - }
> > -
> > return 0;
> > }
> > diff --git a/drivers/net/hinic/hinic_pmd_ethdev.c b/drivers/net/hinic/hinic_pmd_ethdev.c
> > index 0c3e1c0..0009a61 100644
> > --- a/drivers/net/hinic/hinic_pmd_ethdev.c
> > +++ b/drivers/net/hinic/hinic_pmd_ethdev.c
> > @@ -1701,12 +1701,6 @@ static int hinic_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> > nic_dev->proc_dev_name, dev->data->port_id);
> > }
> > - if (mask & ETH_VLAN_EXTEND_MASK) {
> > - PMD_DRV_LOG(ERR, "Don't support vlan qinq, device: %s, port_id: %d",
> > - nic_dev->proc_dev_name, dev->data->port_id);
> > - return -ENOTSUP;
> > - }
> > -
> > return 0;
> > }
> > diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> > index 970a31c..9211cf5 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -3877,11 +3877,6 @@ i40e_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> > struct i40e_vsi *vsi = pf->main_vsi;
> > struct rte_eth_rxmode *rxmode;
> > - if (mask & ETH_QINQ_STRIP_MASK) {
> > - PMD_DRV_LOG(ERR, "Strip qinq is not supported.");
> > - return -ENOTSUP;
> > - }
> > -
> > rxmode = &dev->data->dev_conf.rxmode;
> > if (mask & ETH_VLAN_FILTER_MASK) {
> > if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_FILTER)
> > diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
> > index 2460ee1..b7a91ae 100644
> > --- a/drivers/net/nfp/nfp_net.c
> > +++ b/drivers/net/nfp/nfp_net.c
> > @@ -2353,11 +2353,6 @@ nfp_net_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> > hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
> > new_ctrl = 0;
> > - if ((mask & ETH_VLAN_FILTER_OFFLOAD) ||
> > - (mask & ETH_VLAN_EXTEND_OFFLOAD))
> > - PMD_DRV_LOG(INFO, "No support for ETH_VLAN_FILTER_OFFLOAD or"
> > - " ETH_VLAN_EXTEND_OFFLOAD");
> > -
> > /* Enable vlan strip if it is not configured yet */
> > if ((mask & ETH_VLAN_STRIP_OFFLOAD) &&
> > !(hw->ctrl & NFP_NET_CFG_CTRL_RXVLAN))
> > diff --git a/drivers/net/octeontx/octeontx_ethdev_ops.c b/drivers/net/octeontx/octeontx_ethdev_ops.c
> > index ff627a6..dbe13ce 100644
> > --- a/drivers/net/octeontx/octeontx_ethdev_ops.c
> > +++ b/drivers/net/octeontx/octeontx_ethdev_ops.c
> > @@ -43,16 +43,6 @@ octeontx_dev_vlan_offload_set(struct rte_eth_dev *dev, int mask)
> > rxmode = &dev->data->dev_conf.rxmode;
> > - if (mask & ETH_VLAN_EXTEND_MASK) {
> > - octeontx_log_err("Extend offload not supported");
> > - return -ENOTSUP;
> > - }
> > -
> > - if (mask & ETH_VLAN_STRIP_MASK) {
> > - octeontx_log_err("VLAN strip offload not supported");
> > - return -ENOTSUP;
> > - }
> > -
> > if (mask & ETH_VLAN_FILTER_MASK) {
> > if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_FILTER) {
> > rc = octeontx_vlan_hw_filter(nic, true);
> > diff --git a/drivers/net/octeontx2/otx2_vlan.c b/drivers/net/octeontx2/otx2_vlan.c
> > index 322a565..7357b06 100644
> > --- a/drivers/net/octeontx2/otx2_vlan.c
> > +++ b/drivers/net/octeontx2/otx2_vlan.c
> > @@ -717,11 +717,6 @@ otx2_nix_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
> > rxmode = ð_dev->data->dev_conf.rxmode;
> > - if (mask & ETH_VLAN_EXTEND_MASK) {
> > - otx2_err("Extend offload not supported");
> > - return -ENOTSUP;
> > - }
> > -
> > if (mask & ETH_VLAN_STRIP_MASK) {
> > if (rxmode->offloads & DEV_RX_OFFLOAD_VLAN_STRIP) {
> > offloads |= DEV_RX_OFFLOAD_VLAN_STRIP;
> > diff --git a/drivers/net/qede/qede_ethdev.c b/drivers/net/qede/qede_ethdev.c
> > index c4f8f12..04d17c7 100644
> > --- a/drivers/net/qede/qede_ethdev.c
> > +++ b/drivers/net/qede/qede_ethdev.c
> > @@ -1036,9 +1036,6 @@ static int qede_vlan_offload_set(struct rte_eth_dev *eth_dev, int mask)
> > }
> > }
> > - if (mask & ETH_VLAN_EXTEND_MASK)
> > - DP_ERR(edev, "Extend VLAN not supported\n");
> > -
> > qdev->vlan_offload_mask = mask;
> > DP_INFO(edev, "VLAN offload mask %d\n", mask);
> > diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> > index b0b0474..bf79749 100644
> > --- a/lib/librte_ethdev/rte_ethdev.c
> > +++ b/lib/librte_ethdev/rte_ethdev.c
> > @@ -3260,12 +3260,14 @@ rte_eth_dev_set_vlan_ether_type(uint16_t port_id,
> > int
> > rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
> > {
> > + struct rte_eth_dev_info dev_info;
> > struct rte_eth_dev *dev;
> > int ret = 0;
> > int mask = 0;
> > int cur, org = 0;
> > uint64_t orig_offloads;
> > uint64_t dev_offloads;
> > + uint64_t new_offloads;
> > RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> > dev = &rte_eth_devices[port_id];
> > @@ -3319,6 +3321,25 @@ rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask)
> > if (mask == 0)
> > return ret;
> > + ret = rte_eth_dev_info_get(port_id, &dev_info);
> > + if (ret != 0)
> > + return ret;
> > +
> > + /*
> > + * New added Rx VLAN offloading which are not enabled in
> > + * rte_eth_dev_configure() must be within its device capabilities
> > + */
> > + if ((dev_offloads & dev_info.rx_offload_capa) != dev_offloads) {
> > + new_offloads = dev_offloads & ~orig_offloads;
> > + RTE_ETHDEV_LOG(ERR,
> > + "Ethdev port_id=%u requested new added VLAN offloads "
> > + "0x%" PRIx64 " must be within Rx offloads capabilities "
> > + "0x%" PRIx64 " in %s()\n",
> > + port_id, new_offloads, dev_info.rx_offload_capa,
> > + __func__);
> > + return -EINVAL;
> > + }
> > +
> > RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->vlan_offload_set, -ENOTSUP);
> > dev->data->dev_conf.rxmode.offloads = dev_offloads;
> > ret = (*dev->dev_ops->vlan_offload_set)(dev, mask);
>
next prev parent reply other threads:[~2020-06-29 14:47 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-22 8:08 [dpdk-dev] [PATCH v4 0/2] ethdev: minor bugfixes Wei Hu (Xavier)
2020-06-22 8:08 ` [dpdk-dev] [PATCH v4 1/2] ethdev: fix data room size verification in Rx queue setup Wei Hu (Xavier)
2020-06-22 8:24 ` Sachin Saxena (OSS)
2020-06-22 8:09 ` [dpdk-dev] [PATCH v4 2/2] ethdev: fix VLAN offloads set if no relative capabilities Wei Hu (Xavier)
2020-06-22 8:27 ` Sachin Saxena (OSS)
2020-06-22 9:08 ` Wangxiaoyun (Cloud)
2020-06-29 1:34 ` Wei Hu (Xavier)
2020-06-29 14:47 ` Harman Kalra [this message]
2020-07-01 2:32 ` [dpdk-dev] [EXT] " Wei Hu (Xavier)
2020-07-03 1:28 ` [dpdk-dev] " Wei Hu (Xavier)
2020-07-05 11:22 ` Jeff Guo
2020-07-06 6:32 ` Wei Hu (Xavier)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200629144708.GA193041@outlook.office365.com \
--to=hkalra@marvell.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=heinrich.kuhn@netronome.com \
--cc=jerinj@marvell.com \
--cc=jia.guo@intel.com \
--cc=kirankumark@marvell.com \
--cc=ndabilpuram@marvell.com \
--cc=qi.z.zhang@intel.com \
--cc=rmody@marvell.com \
--cc=shshaikh@marvell.com \
--cc=xavier.huwei@huawei.com \
--cc=xiao.w.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).