From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org
Cc: maryam.tahhan@intel.com, reshma.pattan@intel.com,
Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: [dpdk-dev] [PATCH] app/procinfo: enhance port and mempool info
Date: Fri, 10 Jul 2020 21:36:10 +0530 [thread overview]
Message-ID: <20200710160610.22844-1-hemant.agrawal@nxp.com> (raw)
This patch enhances the port info for more details about
the port and queues.
This patch also add support to get info about the mempool
ops.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
app/proc-info/main.c | 63 ++++++++++++++++++++++++++++++++++++--------
1 file changed, 52 insertions(+), 11 deletions(-)
diff --git a/app/proc-info/main.c b/app/proc-info/main.c
index abeca4aab..2dda1e201 100644
--- a/app/proc-info/main.c
+++ b/app/proc-info/main.c
@@ -661,6 +661,7 @@ show_port(void)
{
uint16_t i = 0;
int ret = 0, j, k;
+ int rxq_count;
snprintf(bdr_str, MAX_STRING_LEN, " show - Port PMD %"PRIu64,
rte_get_tsc_hz());
@@ -672,12 +673,27 @@ show_port(void)
struct rte_eth_dev_info dev_info;
struct rte_eth_rxq_info queue_info;
struct rte_eth_rss_conf rss_conf;
+ struct rte_ether_addr ethaddr;
+ char name[RTE_ETH_NAME_MAX_LEN];
memset(&rss_conf, 0, sizeof(rss_conf));
- snprintf(bdr_str, MAX_STRING_LEN, " Port (%u)", i);
+ rte_eth_dev_get_name_by_port(i, name);
+
+ snprintf(bdr_str, MAX_STRING_LEN, " Port (%u)(%s)", i, name);
STATS_BDR_STR(5, bdr_str);
printf(" - generic config\n");
+ ret = rte_eth_macaddr_get(i, ðaddr);
+ if (ret != 0) {
+ printf("macaddr get failed (port %u): %s\n",
+ i, rte_strerror(-ret));
+ } else {
+ printf("\t MAC: %02" PRIx8 ":%02" PRIx8 ":%02" PRIx8
+ ":%02" PRIx8 ":%02" PRIx8 ":%02" PRIx8"\n",
+ ethaddr.addr_bytes[0], ethaddr.addr_bytes[1],
+ ethaddr.addr_bytes[2], ethaddr.addr_bytes[3],
+ ethaddr.addr_bytes[4], ethaddr.addr_bytes[5]);
+ }
printf("\t -- Socket %d\n", rte_eth_dev_socket_id(i));
ret = rte_eth_link_get(i, &link);
@@ -685,18 +701,21 @@ show_port(void)
printf("Link get failed (port %u): %s\n",
i, rte_strerror(-ret));
} else {
- printf("\t -- link speed %d duplex %d,"
- " auto neg %d status %d\n",
- link.link_speed,
- link.link_duplex,
- link.link_autoneg,
- link.link_status);
+ printf("\t -- link speed: %d Mbps %s,"
+ ":auto neg %d :status-%s\n",
+ link.link_speed,
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ ("full-duplex") : ("half-duplex"),
+ link.link_autoneg,
+ (link.link_status) ? ("up") : ("down"));
}
- printf("\t -- promiscuous (%d)\n",
- rte_eth_promiscuous_get(i));
+ printf("\t -- promiscuous: %s\n",
+ rte_eth_promiscuous_get(i) ? "enabled" : "disabled");
ret = rte_eth_dev_get_mtu(i, &mtu);
if (ret == 0)
printf("\t -- mtu (%d)\n", mtu);
+ printf("\t -- multicast mode: %s\n",
+ rte_eth_allmulticast_get(i) ? "enabled" : "disabled");
ret = rte_eth_dev_info_get(i, &dev_info);
if (ret != 0) {
@@ -704,7 +723,17 @@ show_port(void)
i, strerror(-ret));
return;
}
-
+ printf("\t -- Driver name: %s\n", dev_info.driver_name);
+ if (dev_info.device->devargs && dev_info.device->devargs->args)
+ printf("\t -- Devargs: %s\n",
+ dev_info.device->devargs->args);
+ printf("\t -- min size of RX buf: %u\n",
+ dev_info.min_rx_bufsize);
+ printf("\t -- max config length of RX pkt: %u\n",
+ dev_info.max_rx_pktlen);
+
+ printf("\t -- num of RX queues: %u\n", dev_info.nb_rx_queues);
+ printf("\t -- num of TX queues: %u\n", dev_info.nb_tx_queues);
printf(" - queue\n");
for (j = 0; j < dev_info.nb_rx_queues; j++) {
ret = rte_eth_rx_queue_info_get(i, j, &queue_info);
@@ -718,7 +747,15 @@ show_port(void)
queue_info.nb_desc,
queue_info.conf.offloads,
queue_info.mp->socket_id);
+ printf("\t -- mempool name: %s\n",
+ (queue_info.mp == NULL) ?
+ "NULL" : queue_info.mp->name);
+
}
+ rxq_count = rte_eth_rx_queue_count(i, j);
+ if (rxq_count >= 0)
+ printf("\t -- used rx desc count: %d\n",
+ rxq_count);
}
ret = rte_eth_dev_rss_hash_conf_get(i, &rss_conf);
@@ -734,7 +771,7 @@ show_port(void)
}
}
- printf(" - cyrpto context\n");
+ printf(" - crypto context\n");
#ifdef RTE_LIBRTE_SECURITY
void *p_ctx = rte_eth_dev_get_sec_ctx(i);
printf("\t -- security context - %p\n", p_ctx);
@@ -1176,8 +1213,10 @@ show_mempool(char *name)
if (name != NULL) {
struct rte_mempool *ptr = rte_mempool_lookup(name);
+ struct rte_mempool_ops *ops;
if (ptr != NULL) {
flags = ptr->flags;
+ ops = rte_mempool_get_ops(ptr->ops_index);
printf(" - Name: %s on socket %d\n"
" - flags:\n"
"\t -- No spread (%c)\n"
@@ -1207,6 +1246,8 @@ show_mempool(char *name)
printf(" - Count: avail (%u), in use (%u)\n",
rte_mempool_avail_count(ptr),
rte_mempool_in_use_count(ptr));
+ printf(" - ops_index %d ops_name %s\n",
+ ptr->ops_index, ops ? ops->name:"NA");
STATS_BDR_STR(50, "");
return;
--
2.17.1
next reply other threads:[~2020-07-10 16:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-10 16:06 Hemant Agrawal [this message]
2020-07-10 18:07 ` Stephen Hemminger
2020-07-11 9:53 ` [dpdk-dev] [PATCH v2] app/procinfo: enhance port mempool and crypto info Hemant Agrawal
2020-07-12 3:12 ` Stephen Hemminger
2020-07-13 3:49 ` Hemant Agrawal
2020-07-15 0:07 ` Stephen Hemminger
2020-07-15 0:43 ` Hemant Agrawal
2020-07-13 9:57 ` Pattan, Reshma
2020-07-13 13:15 ` [dpdk-dev] [PATCH v3 1/2] app/proc-info: enhance mempool to print ops name Hemant Agrawal
2020-07-13 13:15 ` [dpdk-dev] [PATCH v3 2/2] app/proc-info: add crypto security context info Hemant Agrawal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200710160610.22844-1-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=dev@dpdk.org \
--cc=maryam.tahhan@intel.com \
--cc=reshma.pattan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).