From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org
Cc: maryam.tahhan@intel.com, reshma.pattan@intel.com,
Hemant Agrawal <hemant.agrawal@nxp.com>
Subject: [dpdk-dev] [PATCH v2] app/procinfo: enhance port mempool and crypto info
Date: Sat, 11 Jul 2020 15:23:43 +0530 [thread overview]
Message-ID: <20200711095343.10523-1-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <20200710160610.22844-1-hemant.agrawal@nxp.com>
This patch enhances the port info for more details about
the port and queues.
This patch also add support to get info about the mempool
ops and security context for crypto devices.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
app/proc-info/main.c | 84 +++++++++++++++++++++++++++++++++++++-------
1 file changed, 72 insertions(+), 12 deletions(-)
diff --git a/app/proc-info/main.c b/app/proc-info/main.c
index abeca4aab..818c85d61 100644
--- a/app/proc-info/main.c
+++ b/app/proc-info/main.c
@@ -661,6 +661,7 @@ show_port(void)
{
uint16_t i = 0;
int ret = 0, j, k;
+ int rxq_count;
snprintf(bdr_str, MAX_STRING_LEN, " show - Port PMD %"PRIu64,
rte_get_tsc_hz());
@@ -672,12 +673,26 @@ show_port(void)
struct rte_eth_dev_info dev_info;
struct rte_eth_rxq_info queue_info;
struct rte_eth_rss_conf rss_conf;
+ struct rte_ether_addr ethaddr;
+ char name[RTE_ETH_NAME_MAX_LEN];
memset(&rss_conf, 0, sizeof(rss_conf));
- snprintf(bdr_str, MAX_STRING_LEN, " Port (%u)", i);
+ rte_eth_dev_get_name_by_port(i, name);
+
+ snprintf(bdr_str, MAX_STRING_LEN, " Port (%u)(%s)", i, name);
STATS_BDR_STR(5, bdr_str);
printf(" - generic config\n");
+ ret = rte_eth_macaddr_get(i, ðaddr);
+ if (ret != 0) {
+ printf("macaddr get failed (port %u): %s\n",
+ i, rte_strerror(-ret));
+ } else {
+ char buf[RTE_ETHER_ADDR_FMT_SIZE];
+ rte_ether_format_addr(buf, RTE_ETHER_ADDR_FMT_SIZE,
+ ðaddr);
+ printf("\t -- MAC:%s\n", buf);
+ }
printf("\t -- Socket %d\n", rte_eth_dev_socket_id(i));
ret = rte_eth_link_get(i, &link);
@@ -685,18 +700,21 @@ show_port(void)
printf("Link get failed (port %u): %s\n",
i, rte_strerror(-ret));
} else {
- printf("\t -- link speed %d duplex %d,"
- " auto neg %d status %d\n",
- link.link_speed,
- link.link_duplex,
- link.link_autoneg,
- link.link_status);
+ printf("\t -- link speed: %d Mbps %s,"
+ ":auto neg %d :status-%s\n",
+ link.link_speed,
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ ("full-duplex") : ("half-duplex"),
+ link.link_autoneg,
+ (link.link_status) ? ("up") : ("down"));
}
- printf("\t -- promiscuous (%d)\n",
- rte_eth_promiscuous_get(i));
+ printf("\t -- promiscuous: %s\n",
+ rte_eth_promiscuous_get(i) ? "enabled" : "disabled");
ret = rte_eth_dev_get_mtu(i, &mtu);
if (ret == 0)
printf("\t -- mtu (%d)\n", mtu);
+ printf("\t -- multicast mode: %s\n",
+ rte_eth_allmulticast_get(i) ? "enabled" : "disabled");
ret = rte_eth_dev_info_get(i, &dev_info);
if (ret != 0) {
@@ -704,7 +722,17 @@ show_port(void)
i, strerror(-ret));
return;
}
-
+ printf("\t -- Driver name: %s\n", dev_info.driver_name);
+ if (dev_info.device->devargs && dev_info.device->devargs->args)
+ printf("\t -- Devargs: %s\n",
+ dev_info.device->devargs->args);
+ printf("\t -- min size of RX buf: %u\n",
+ dev_info.min_rx_bufsize);
+ printf("\t -- max config length of RX pkt: %u\n",
+ dev_info.max_rx_pktlen);
+
+ printf("\t -- num of RX queues: %u\n", dev_info.nb_rx_queues);
+ printf("\t -- num of TX queues: %u\n", dev_info.nb_tx_queues);
printf(" - queue\n");
for (j = 0; j < dev_info.nb_rx_queues; j++) {
ret = rte_eth_rx_queue_info_get(i, j, &queue_info);
@@ -718,7 +746,15 @@ show_port(void)
queue_info.nb_desc,
queue_info.conf.offloads,
queue_info.mp->socket_id);
+ printf("\t -- mempool name: %s\n",
+ (queue_info.mp == NULL) ?
+ "NULL" : queue_info.mp->name);
+
}
+ rxq_count = rte_eth_rx_queue_count(i, j);
+ if (rxq_count >= 0)
+ printf("\t -- used rx desc count: %d\n",
+ rxq_count);
}
ret = rte_eth_dev_rss_hash_conf_get(i, &rss_conf);
@@ -734,7 +770,7 @@ show_port(void)
}
}
- printf(" - cyrpto context\n");
+ printf(" - crypto context\n");
#ifdef RTE_LIBRTE_SECURITY
void *p_ctx = rte_eth_dev_get_sec_ctx(i);
printf("\t -- security context - %p\n", p_ctx);
@@ -1064,7 +1100,7 @@ display_crypto_feature_info(uint64_t x)
printf("\t\t + AESNI: CPU (%c), HW (%c)\n",
(x & RTE_CRYPTODEV_FF_CPU_AESNI) ? 'y' : 'n',
(x & RTE_CRYPTODEV_FF_HW_ACCELERATED) ? 'y' : 'n');
- printf("\t\t + INLINE (%c)\n",
+ printf("\t\t + SECURITY OFFLOAD(%c)\n",
(x & RTE_CRYPTODEV_FF_SECURITY) ? 'y' : 'n');
printf("\t\t + ARM: NEON (%c), CE (%c)\n",
(x & RTE_CRYPTODEV_FF_CPU_NEON) ? 'y' : 'n',
@@ -1122,6 +1158,26 @@ show_crypto(void)
stats.dequeued_count,
stats.dequeue_err_count);
}
+#ifdef RTE_LIBRTE_SECURITY
+ void *p_ctx = rte_cryptodev_get_sec_ctx(i);
+ printf("\t -- security context - %p\n", p_ctx);
+
+ if (p_ctx) {
+ printf("\t -- size %u\n",
+ rte_security_session_get_size(p_ctx));
+ const struct rte_security_capability *s_cap =
+ rte_security_capabilities_get(p_ctx);
+ if (s_cap) {
+ printf("\t -- action (0x%x), protocol (0x%x),"
+ " offload flags (0x%x)\n",
+ s_cap->action,
+ s_cap->protocol,
+ s_cap->ol_flags);
+ printf("\t -- capabilities - oper type %x\n",
+ s_cap->crypto_capabilities->op);
+ }
+ }
+#endif
}
STATS_BDR_STR(50, "");
@@ -1176,8 +1232,10 @@ show_mempool(char *name)
if (name != NULL) {
struct rte_mempool *ptr = rte_mempool_lookup(name);
+ struct rte_mempool_ops *ops;
if (ptr != NULL) {
flags = ptr->flags;
+ ops = rte_mempool_get_ops(ptr->ops_index);
printf(" - Name: %s on socket %d\n"
" - flags:\n"
"\t -- No spread (%c)\n"
@@ -1207,6 +1265,8 @@ show_mempool(char *name)
printf(" - Count: avail (%u), in use (%u)\n",
rte_mempool_avail_count(ptr),
rte_mempool_in_use_count(ptr));
+ printf(" - ops_index %d ops_name %s\n",
+ ptr->ops_index, ops ? ops->name:"NA");
STATS_BDR_STR(50, "");
return;
--
2.17.1
next prev parent reply other threads:[~2020-07-11 9:58 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-10 16:06 [dpdk-dev] [PATCH] app/procinfo: enhance port and mempool info Hemant Agrawal
2020-07-10 18:07 ` Stephen Hemminger
2020-07-11 9:53 ` Hemant Agrawal [this message]
2020-07-12 3:12 ` [dpdk-dev] [PATCH v2] app/procinfo: enhance port mempool and crypto info Stephen Hemminger
2020-07-13 3:49 ` Hemant Agrawal
2020-07-15 0:07 ` Stephen Hemminger
2020-07-15 0:43 ` Hemant Agrawal
2020-07-13 9:57 ` Pattan, Reshma
2020-07-13 13:15 ` [dpdk-dev] [PATCH v3 1/2] app/proc-info: enhance mempool to print ops name Hemant Agrawal
2020-07-13 13:15 ` [dpdk-dev] [PATCH v3 2/2] app/proc-info: add crypto security context info Hemant Agrawal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200711095343.10523-1-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=dev@dpdk.org \
--cc=maryam.tahhan@intel.com \
--cc=reshma.pattan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).