DPDK patches and discussions
 help / color / mirror / Atom feed
From: Somnath Kotur <somnath.kotur@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com
Subject: [dpdk-dev] [PATCH 05/10] net/bnxt: add support to extract data from the ulp blob
Date: Mon, 13 Jul 2020 11:58:23 +0530
Message-ID: <20200713062828.19626-6-somnath.kotur@broadcom.com> (raw)
In-Reply-To: <20200713062828.19626-1-somnath.kotur@broadcom.com>

From: Kishore Padmanabha <kishore.padmanabha@broadcom.com>

Extended the ulp blob to extract data from the blob for a given
offset and length. The support is added only for little endian
format.

Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
---
 drivers/net/bnxt/tf_ulp/ulp_utils.c | 76 +++++++++++++++++++++++++++++++++++++
 drivers/net/bnxt/tf_ulp/ulp_utils.h | 17 +++++++++
 2 files changed, 93 insertions(+)

diff --git a/drivers/net/bnxt/tf_ulp/ulp_utils.c b/drivers/net/bnxt/tf_ulp/ulp_utils.c
index 3afaac6..a923da8 100644
--- a/drivers/net/bnxt/tf_ulp/ulp_utils.c
+++ b/drivers/net/bnxt/tf_ulp/ulp_utils.c
@@ -418,6 +418,82 @@ ulp_blob_pad_push(struct ulp_blob *blob,
 	return datalen;
 }
 
+/* Get data from src and put into dst using little-endian format */
+static void
+ulp_bs_get_lsb(uint8_t *src, uint16_t bitpos, uint8_t bitlen, uint8_t *dst)
+{
+	uint8_t bitoffs = bitpos % ULP_BLOB_BYTE;
+	uint16_t index  = ULP_BITS_2_BYTE_NR(bitpos);
+	uint8_t mask, partial, shift;
+
+	shift = bitoffs;
+	partial = ULP_BLOB_BYTE - bitoffs;
+	if (bitoffs + bitlen <= ULP_BLOB_BYTE) {
+		mask = ((1 << bitlen) - 1) << shift;
+		*dst = (src[index] & mask) >> shift;
+	} else {
+		mask = ((1 << partial) - 1) << shift;
+		*dst = (src[index] & mask) >> shift;
+		index++;
+		partial = bitlen - partial;
+		mask = ((1 << partial) - 1);
+		*dst |= (src[index] & mask) << (ULP_BLOB_BYTE - bitoffs);
+	}
+}
+
+/* Assuming that src is in little-Endian Format */
+static void
+ulp_bs_pull_lsb(uint8_t *src, uint8_t *dst, uint32_t size,
+		uint32_t offset, uint32_t len)
+{
+	uint32_t idx;
+	uint32_t cnt = ULP_BITS_2_BYTE_NR(len);
+
+	/* iterate bytewise to get data */
+	for (idx = 0; idx < cnt; idx++) {
+		ulp_bs_get_lsb(src, offset, ULP_BLOB_BYTE,
+			       &dst[size - 1 - idx]);
+		offset += ULP_BLOB_BYTE;
+		len -= ULP_BLOB_BYTE;
+	}
+
+	/* Extract the last reminder data that is not 8 byte boundary */
+	if (len)
+		ulp_bs_get_lsb(src, offset, len, &dst[size - 1 - idx]);
+}
+
+/*
+ * Extract data from the binary blob using given offset.
+ *
+ * blob [in] The blob that data is extracted from. The blob must
+ * be initialized prior to pulling data.
+ *
+ * data [in] A pointer to put the data.
+ * data_size [in] size of the data buffer in bytes.
+ *offset [in] - Offset in the blob to extract the data in bits format.
+ * len [in] The number of bits to be pulled from the blob.
+ *
+ * Output: zero on success, -1 on failure
+ */
+int32_t
+ulp_blob_pull(struct ulp_blob *blob, uint8_t *data, uint32_t data_size,
+	      uint16_t offset, uint16_t len)
+{
+	/* validate the arguments */
+	if (!blob || (offset + len) > blob->bitlen ||
+	    ULP_BYTE_2_BITS(data_size) < len) {
+		BNXT_TF_DBG(ERR, "invalid argument\n");
+		return -1; /* failure */
+	}
+
+	if (blob->byte_order == BNXT_ULP_BYTE_ORDER_BE) {
+		BNXT_TF_DBG(ERR, "Big endian pull not implemented\n");
+		return -1; /* failure */
+	}
+	ulp_bs_pull_lsb(blob->data, data, data_size, offset, len);
+	return 0;
+}
+
 /*
  * Get the data portion of the binary blob.
  *
diff --git a/drivers/net/bnxt/tf_ulp/ulp_utils.h b/drivers/net/bnxt/tf_ulp/ulp_utils.h
index 97c7750..22dfb17 100644
--- a/drivers/net/bnxt/tf_ulp/ulp_utils.h
+++ b/drivers/net/bnxt/tf_ulp/ulp_utils.h
@@ -229,6 +229,23 @@ ulp_blob_data_get(struct ulp_blob *blob,
 		  uint16_t *datalen);
 
 /*
+ * Extract data from the binary blob using given offset.
+ *
+ * blob [in] The blob that data is extracted from. The blob must
+ * be initialized prior to pulling data.
+ *
+ * data [in] A pointer to put the data.
+ * data_size [in] size of the data buffer in bytes.
+ *offset [in] - Offset in the blob to extract the data in bits format.
+ * len [in] The number of bits to be pulled from the blob.
+ *
+ * Output: zero on success, -1 on failure
+ */
+int32_t
+ulp_blob_pull(struct ulp_blob *blob, uint8_t *data, uint32_t data_size,
+	      uint16_t offset, uint16_t len);
+
+/*
  * Adds pad to an initialized blob at the current offset
  *
  * blob [in] The blob that data is added to.  The blob must
-- 
2.7.4


  parent reply	other threads:[~2020-07-13  6:34 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-13  6:28 [dpdk-dev] [v2 PATCH 00/10] bnxt patches Somnath Kotur
2020-07-13  6:28 ` [dpdk-dev] [PATCH 01/10] net/bnxt: add option to delay EEM sysmem mapping Somnath Kotur
2020-07-13  6:28 ` [dpdk-dev] [PATCH 02/10] net/bnxt: implement TF Identifier search Somnath Kotur
2020-07-13  6:28 ` [dpdk-dev] [PATCH 03/10] net/bnxt: check index range in bulk get Somnath Kotur
2020-07-13  6:28 ` [dpdk-dev] [PATCH 04/10] net/bnxt: add changes to support 2 table scopes Somnath Kotur
2020-07-13  6:28 ` Somnath Kotur [this message]
2020-07-13  6:28 ` [dpdk-dev] [PATCH 06/10] net/bnxt: ignore ipv4 tos mask Somnath Kotur
2020-07-13  6:28 ` [dpdk-dev] [PATCH 07/10] net/bnxt: add support for identifier search and ref count Somnath Kotur
2020-07-13  6:28 ` [dpdk-dev] [PATCH 08/10] net/bnxt: consider vlan fields for the template match criteria Somnath Kotur
2020-07-13  6:28 ` [dpdk-dev] [PATCH 09/10] net/bnxt: increase the number of egress flow entries Somnath Kotur
2020-07-13  6:28 ` [dpdk-dev] [PATCH 10/10] net/bnxt: add support for decrement ttl action Somnath Kotur
2020-07-13  7:56 ` [dpdk-dev] [v2 PATCH 00/10] bnxt patches Thomas Monjalon
  -- strict thread matches above, loose matches on Subject: below --
2020-07-13  6:15 [dpdk-dev] [PATCH " Somnath Kotur
2020-07-13  6:15 ` [dpdk-dev] [PATCH 05/10] net/bnxt: add support to extract data from the ulp blob Somnath Kotur
2020-07-13  9:42 ` [dpdk-dev] [PATCH v3 00/10] bnxt patches Somnath Kotur
2020-07-13  9:42   ` [dpdk-dev] [PATCH 05/10] net/bnxt: add support to extract data from the ulp blob Somnath Kotur
2020-07-15 13:50 ` [dpdk-dev] [PATCH v4 00/10] bnxt patches Somnath Kotur
2020-07-15 13:50   ` [dpdk-dev] [PATCH 05/10] net/bnxt: add support to extract data from the ulp blob Somnath Kotur

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200713062828.19626-6-somnath.kotur@broadcom.com \
    --to=somnath.kotur@broadcom.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git