From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from dpdk.org (dpdk.org [92.243.14.124]) by inbox.dpdk.org (Postfix) with ESMTP id 416A9A0540; Mon, 13 Jul 2020 17:14:24 +0200 (CEST) Received: from [92.243.14.124] (localhost [127.0.0.1]) by dpdk.org (Postfix) with ESMTP id 1EC561D639; Mon, 13 Jul 2020 17:14:24 +0200 (CEST) Received: from mx0b-0016f401.pphosted.com (mx0b-0016f401.pphosted.com [67.231.156.173]) by dpdk.org (Postfix) with ESMTP id 7A3761D615 for ; Mon, 13 Jul 2020 17:14:22 +0200 (CEST) Received: from pps.filterd (m0045851.ppops.net [127.0.0.1]) by mx0b-0016f401.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 06DF9w3h016724; Mon, 13 Jul 2020 08:14:21 -0700 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=marvell.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=pfpt0818; bh=XuzxdlrSCusSe0KiGJzg0I3sHK0L6QnCvEpuuygTjzg=; b=hdQzWE9v8BRj70NgmxM0W2OIGWsoifutnMsrUxgo9mSxwKt2Pl6nfdDMXt9JmRfhr5SI 6uARwB5qUCJn1g4wknCT/ocuWSgiagWHL7E2SCBvbvT5sHK9hvELYHzynvCIdxa3fDaq tmCaD/Mv8kn/KHoC78BZ66fhbSQOj9o3nAH5PwbeSx0V69qugA1EKWNy3Hoone7FPrDt QpuOpSmds175Ai5oC3YRr8q8FwUGlkRnHvGvtfPzkq8x1xwh0znTBugiTqu1W8bpsugK u9NpoYg7ZT65m/QG/BFCq8cwFuG99DyshAXfYDZ8Bb3SbNRQFPVHKRCRSdf3Lt7asIBY cw== Received: from sc-exch03.marvell.com ([199.233.58.183]) by mx0b-0016f401.pphosted.com with ESMTP id 328mmhh7pr-2 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-SHA384 bits=256 verify=NOT); Mon, 13 Jul 2020 08:14:21 -0700 Received: from DC5-EXCH01.marvell.com (10.69.176.38) by SC-EXCH03.marvell.com (10.93.176.83) with Microsoft SMTP Server (TLS) id 15.0.1497.2; Mon, 13 Jul 2020 08:14:18 -0700 Received: from maili.marvell.com (10.69.176.80) by DC5-EXCH01.marvell.com (10.69.176.38) with Microsoft SMTP Server id 15.0.1497.2 via Frontend Transport; Mon, 13 Jul 2020 08:14:19 -0700 Received: from dut1171.mv.qlogic.com (unknown [10.112.88.18]) by maili.marvell.com (Postfix) with ESMTP id EC6EB3F7044; Mon, 13 Jul 2020 08:14:18 -0700 (PDT) Received: from dut1171.mv.qlogic.com (localhost [127.0.0.1]) by dut1171.mv.qlogic.com (8.14.7/8.14.7) with ESMTP id 06DFEIQS017596; Mon, 13 Jul 2020 08:14:18 -0700 Received: (from root@localhost) by dut1171.mv.qlogic.com (8.14.7/8.14.7/Submit) id 06DFEIjQ017595; Mon, 13 Jul 2020 08:14:18 -0700 From: Manish Chopra To: , , , CC: , , , , , , , , , , , Date: Mon, 13 Jul 2020 08:13:13 -0700 Message-ID: <20200713151319.17547-2-manishc@marvell.com> X-Mailer: git-send-email 2.12.0 In-Reply-To: <20200713151319.17547-1-manishc@marvell.com> References: <20200713151319.17547-1-manishc@marvell.com> MIME-Version: 1.0 Content-Type: text/plain X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.235, 18.0.687 definitions=2020-07-13_14:2020-07-13, 2020-07-13 signatures=0 Subject: [dpdk-dev] [PATCH v2 1/7] lib/librte_pci: add rte_pci_regs.h X-BeenThere: dev@dpdk.org X-Mailman-Version: 2.1.15 Precedence: list List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" This is merely copy of latest linux/pci_regs.h in order to avoid dependency of dpdk on user headers. Signed-off-by: Manish Chopra Signed-off-by: Igor Russkikh --- drivers/bus/pci/linux/pci_uio.c | 2 +- drivers/bus/pci/linux/pci_vfio.c | 2 +- drivers/net/bnx2x/bnx2x.h | 2 +- drivers/net/hns3/hns3_ethdev_vf.c | 2 +- drivers/vdpa/ifc/base/ifcvf_osdep.h | 2 +- lib/librte_pci/Makefile | 1 + lib/librte_pci/meson.build | 2 +- lib/librte_pci/rte_pci_regs.h | 1075 +++++++++++++++++++++++++++ 8 files changed, 1082 insertions(+), 6 deletions(-) create mode 100644 lib/librte_pci/rte_pci_regs.h diff --git a/drivers/bus/pci/linux/pci_uio.c b/drivers/bus/pci/linux/pci_uio.c index b62200153..698eace00 100644 --- a/drivers/bus/pci/linux/pci_uio.c +++ b/drivers/bus/pci/linux/pci_uio.c @@ -10,12 +10,12 @@ #include #include #include -#include #if defined(RTE_ARCH_X86) #include #endif +#include #include #include #include diff --git a/drivers/bus/pci/linux/pci_vfio.c b/drivers/bus/pci/linux/pci_vfio.c index fdeb9a8ca..96494fcfd 100644 --- a/drivers/bus/pci/linux/pci_vfio.c +++ b/drivers/bus/pci/linux/pci_vfio.c @@ -4,13 +4,13 @@ #include #include -#include #include #include #include #include #include +#include #include #include #include diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index 69cc1430a..4ec269dc6 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -18,6 +18,7 @@ #include #include #include +#include #include "bnx2x_osal.h" #include "bnx2x_ethdev.h" @@ -31,7 +32,6 @@ #include "elink.h" #ifndef RTE_EXEC_ENV_FREEBSD -#include #define PCIY_PMG PCI_CAP_ID_PM #define PCIY_MSI PCI_CAP_ID_MSI diff --git a/drivers/net/hns3/hns3_ethdev_vf.c b/drivers/net/hns3/hns3_ethdev_vf.c index 54e5dac52..81f9e7edc 100644 --- a/drivers/net/hns3/hns3_ethdev_vf.c +++ b/drivers/net/hns3/hns3_ethdev_vf.c @@ -9,8 +9,8 @@ #include #include #include -#include +#include #include #include #include diff --git a/drivers/vdpa/ifc/base/ifcvf_osdep.h b/drivers/vdpa/ifc/base/ifcvf_osdep.h index 6aef25ea4..0a759703d 100644 --- a/drivers/vdpa/ifc/base/ifcvf_osdep.h +++ b/drivers/vdpa/ifc/base/ifcvf_osdep.h @@ -6,8 +6,8 @@ #define _IFCVF_OSDEP_H_ #include -#include +#include #include #include #include diff --git a/lib/librte_pci/Makefile b/lib/librte_pci/Makefile index 7943f30ca..4d153b9ac 100644 --- a/lib/librte_pci/Makefile +++ b/lib/librte_pci/Makefile @@ -15,5 +15,6 @@ EXPORT_MAP := rte_pci_version.map SRCS-$(CONFIG_RTE_LIBRTE_PCI) += rte_pci.c SYMLINK-$(CONFIG_RTE_LIBRTE_PCI)-include += rte_pci.h +SYMLINK-y-include += rte_pci_regs.h include $(RTE_SDK)/mk/rte.lib.mk diff --git a/lib/librte_pci/meson.build b/lib/librte_pci/meson.build index dd41cd506..5c7afbbfb 100644 --- a/lib/librte_pci/meson.build +++ b/lib/librte_pci/meson.build @@ -2,4 +2,4 @@ # Copyright(c) 2017 Intel Corporation sources = files('rte_pci.c') -headers = files('rte_pci.h') +headers = files('rte_pci.h', 'rte_pci_regs.h') diff --git a/lib/librte_pci/rte_pci_regs.h b/lib/librte_pci/rte_pci_regs.h new file mode 100644 index 000000000..1d11f4de5 --- /dev/null +++ b/lib/librte_pci/rte_pci_regs.h @@ -0,0 +1,1075 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * PCI standard defines + * Copyright 1994, Drew Eckhardt + * Copyright 1997--1999 Martin Mares + * + * For more information, please consult the following manuals (look at + * http://www.pcisig.com/ for how to get them): + * + * PCI BIOS Specification + * PCI Local Bus Specification + * PCI to PCI Bridge Specification + * PCI System Design Guide + * + * For HyperTransport information, please consult the following manuals + * from http://www.hypertransport.org : + * + * The HyperTransport I/O Link Specification + */ + +#ifndef _RTE_PCI_REGS_H_ +#define _RTE_PCI_REGS_H_ + +/* + * Conventional PCI and PCI-X Mode 1 devices have 256 bytes of + * configuration space. PCI-X Mode 2 and PCIe devices have 4096 bytes of + * configuration space. + */ +#define PCI_CFG_SPACE_SIZE 256 +#define PCI_CFG_SPACE_EXP_SIZE 4096 + +/* + * Under PCI, each device has 256 bytes of configuration address space, + * of which the first 64 bytes are standardized as follows: + */ +#define PCI_STD_HEADER_SIZEOF 64 +#define PCI_STD_NUM_BARS 6 /* Number of standard BARs */ +#define PCI_VENDOR_ID 0x00 /* 16 bits */ +#define PCI_DEVICE_ID 0x02 /* 16 bits */ +#define PCI_COMMAND 0x04 /* 16 bits */ +#define PCI_COMMAND_IO 0x1 /* Enable response in I/O space */ +#define PCI_COMMAND_MEMORY 0x2 /* Enable response in Memory space */ +#define PCI_COMMAND_MASTER 0x4 /* Enable bus mastering */ +#define PCI_COMMAND_SPECIAL 0x8 /* Enable response to special cycles */ +#define PCI_COMMAND_INVALIDATE 0x10 /* Use memory write and invalidate */ +#define PCI_COMMAND_VGA_PALETTE 0x20 /* Enable palette snooping */ +#define PCI_COMMAND_PARITY 0x40 /* Enable parity checking */ +#define PCI_COMMAND_WAIT 0x80 /* Enable address/data stepping */ +#define PCI_COMMAND_SERR 0x100 /* Enable SERR */ +#define PCI_COMMAND_FAST_BACK 0x200 /* Enable back-to-back writes */ +#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */ + +#define PCI_STATUS 0x06 /* 16 bits */ +#define PCI_STATUS_IMM_READY 0x01 /* Immediate Readiness */ +#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */ +#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */ +#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */ +#define PCI_STATUS_UDF 0x40 /* Support User Definable Features [obsolete] */ +#define PCI_STATUS_FAST_BACK 0x80 /* Accept fast-back to back */ +#define PCI_STATUS_PARITY 0x100 /* Detected parity error */ +#define PCI_STATUS_DEVSEL_MASK 0x600 /* DEVSEL timing */ +#define PCI_STATUS_DEVSEL_FAST 0x000 +#define PCI_STATUS_DEVSEL_MEDIUM 0x200 +#define PCI_STATUS_DEVSEL_SLOW 0x400 +#define PCI_STATUS_SIG_TARGET_ABORT 0x800 /* Set on target abort */ +#define PCI_STATUS_REC_TARGET_ABORT 0x1000 /* Master ack of " */ +#define PCI_STATUS_REC_MASTER_ABORT 0x2000 /* Set on master abort */ +#define PCI_STATUS_SIG_SYSTEM_ERROR 0x4000 /* Set when we drive SERR */ +#define PCI_STATUS_DETECTED_PARITY 0x8000 /* Set on parity error */ + +#define PCI_CLASS_REVISION 0x08 /* High 24 bits are class, low 8 revision */ +#define PCI_REVISION_ID 0x08 /* Revision ID */ +#define PCI_CLASS_PROG 0x09 /* Reg. Level Programming Interface */ +#define PCI_CLASS_DEVICE 0x0a /* Device class */ + +#define PCI_CACHE_LINE_SIZE 0x0c /* 8 bits */ +#define PCI_LATENCY_TIMER 0x0d /* 8 bits */ +#define PCI_HEADER_TYPE 0x0e /* 8 bits */ +#define PCI_HEADER_TYPE_NORMAL 0 +#define PCI_HEADER_TYPE_BRIDGE 1 +#define PCI_HEADER_TYPE_CARDBUS 2 + +#define PCI_BIST 0x0f /* 8 bits */ +#define PCI_BIST_CODE_MASK 0x0f /* Return result */ +#define PCI_BIST_START 0x40 /* 1 to start BIST, 2 secs or less */ +#define PCI_BIST_CAPABLE 0x80 /* 1 if BIST capable */ + +/* + * Base addresses specify locations in memory or I/O space. + * Decoded size can be determined by writing a value of + * 0xffffffff to the register, and reading it back. Only + * 1 bits are decoded. + */ +#define PCI_BASE_ADDRESS_0 0x10 /* 32 bits */ +#define PCI_BASE_ADDRESS_1 0x14 /* 32 bits [htype 0,1 only] */ +#define PCI_BASE_ADDRESS_2 0x18 /* 32 bits [htype 0 only] */ +#define PCI_BASE_ADDRESS_3 0x1c /* 32 bits */ +#define PCI_BASE_ADDRESS_4 0x20 /* 32 bits */ +#define PCI_BASE_ADDRESS_5 0x24 /* 32 bits */ +#define PCI_BASE_ADDRESS_SPACE 0x01 /* 0 = memory, 1 = I/O */ +#define PCI_BASE_ADDRESS_SPACE_IO 0x01 +#define PCI_BASE_ADDRESS_SPACE_MEMORY 0x00 +#define PCI_BASE_ADDRESS_MEM_TYPE_MASK 0x06 +#define PCI_BASE_ADDRESS_MEM_TYPE_32 0x00 /* 32 bit address */ +#define PCI_BASE_ADDRESS_MEM_TYPE_1M 0x02 /* Below 1M [obsolete] */ +#define PCI_BASE_ADDRESS_MEM_TYPE_64 0x04 /* 64 bit address */ +#define PCI_BASE_ADDRESS_MEM_PREFETCH 0x08 /* prefetchable? */ +#define PCI_BASE_ADDRESS_MEM_MASK (~0x0fUL) +#define PCI_BASE_ADDRESS_IO_MASK (~0x03UL) +/* bit 1 is reserved if address_space = 1 */ + +/* Header type 0 (normal devices) */ +#define PCI_CARDBUS_CIS 0x28 +#define PCI_SUBSYSTEM_VENDOR_ID 0x2c +#define PCI_SUBSYSTEM_ID 0x2e +#define PCI_ROM_ADDRESS 0x30 /* Bits 31..11 are address, 10..1 reserved */ +#define PCI_ROM_ADDRESS_ENABLE 0x01 +#define PCI_ROM_ADDRESS_MASK (~0x7ffU) + +#define PCI_CAPABILITY_LIST 0x34 /* Offset of first capability list entry */ + +/* 0x35-0x3b are reserved */ +#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */ +#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */ +#define PCI_MIN_GNT 0x3e /* 8 bits */ +#define PCI_MAX_LAT 0x3f /* 8 bits */ + +/* Header type 1 (PCI-to-PCI bridges) */ +#define PCI_PRIMARY_BUS 0x18 /* Primary bus number */ +#define PCI_SECONDARY_BUS 0x19 /* Secondary bus number */ +#define PCI_SUBORDINATE_BUS 0x1a /* Highest bus number behind the bridge */ +#define PCI_SEC_LATENCY_TIMER 0x1b /* Latency timer for secondary interface */ +#define PCI_IO_BASE 0x1c /* I/O range behind the bridge */ +#define PCI_IO_LIMIT 0x1d +#define PCI_IO_RANGE_TYPE_MASK 0x0fUL /* I/O bridging type */ +#define PCI_IO_RANGE_TYPE_16 0x00 +#define PCI_IO_RANGE_TYPE_32 0x01 +#define PCI_IO_RANGE_MASK (~0x0fUL) /* Standard 4K I/O windows */ +#define PCI_IO_1K_RANGE_MASK (~0x03UL) /* Intel 1K I/O windows */ +#define PCI_SEC_STATUS 0x1e /* Secondary status register, only bit 14 used */ +#define PCI_MEMORY_BASE 0x20 /* Memory range behind */ +#define PCI_MEMORY_LIMIT 0x22 +#define PCI_MEMORY_RANGE_TYPE_MASK 0x0fUL +#define PCI_MEMORY_RANGE_MASK (~0x0fUL) +#define PCI_PREF_MEMORY_BASE 0x24 /* Prefetchable memory range behind */ +#define PCI_PREF_MEMORY_LIMIT 0x26 +#define PCI_PREF_RANGE_TYPE_MASK 0x0fUL +#define PCI_PREF_RANGE_TYPE_32 0x00 +#define PCI_PREF_RANGE_TYPE_64 0x01 +#define PCI_PREF_RANGE_MASK (~0x0fUL) +#define PCI_PREF_BASE_UPPER32 0x28 /* Upper half of prefetchable memory range */ +#define PCI_PREF_LIMIT_UPPER32 0x2c +#define PCI_IO_BASE_UPPER16 0x30 /* Upper half of I/O addresses */ +#define PCI_IO_LIMIT_UPPER16 0x32 +/* 0x34 same as for htype 0 */ +/* 0x35-0x3b is reserved */ +#define PCI_ROM_ADDRESS1 0x38 /* Same as PCI_ROM_ADDRESS, but for htype 1 */ +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_BRIDGE_CONTROL 0x3e +#define PCI_BRIDGE_CTL_PARITY 0x01 /* Enable parity detection on secondary interface */ +#define PCI_BRIDGE_CTL_SERR 0x02 /* The same for SERR forwarding */ +#define PCI_BRIDGE_CTL_ISA 0x04 /* Enable ISA mode */ +#define PCI_BRIDGE_CTL_VGA 0x08 /* Forward VGA addresses */ +#define PCI_BRIDGE_CTL_MASTER_ABORT 0x20 /* Report master aborts */ +#define PCI_BRIDGE_CTL_BUS_RESET 0x40 /* Secondary bus reset */ +#define PCI_BRIDGE_CTL_FAST_BACK 0x80 /* Fast Back2Back enabled on secondary interface */ + +/* Header type 2 (CardBus bridges) */ +#define PCI_CB_CAPABILITY_LIST 0x14 +/* 0x15 reserved */ +#define PCI_CB_SEC_STATUS 0x16 /* Secondary status */ +#define PCI_CB_PRIMARY_BUS 0x18 /* PCI bus number */ +#define PCI_CB_CARD_BUS 0x19 /* CardBus bus number */ +#define PCI_CB_SUBORDINATE_BUS 0x1a /* Subordinate bus number */ +#define PCI_CB_LATENCY_TIMER 0x1b /* CardBus latency timer */ +#define PCI_CB_MEMORY_BASE_0 0x1c +#define PCI_CB_MEMORY_LIMIT_0 0x20 +#define PCI_CB_MEMORY_BASE_1 0x24 +#define PCI_CB_MEMORY_LIMIT_1 0x28 +#define PCI_CB_IO_BASE_0 0x2c +#define PCI_CB_IO_BASE_0_HI 0x2e +#define PCI_CB_IO_LIMIT_0 0x30 +#define PCI_CB_IO_LIMIT_0_HI 0x32 +#define PCI_CB_IO_BASE_1 0x34 +#define PCI_CB_IO_BASE_1_HI 0x36 +#define PCI_CB_IO_LIMIT_1 0x38 +#define PCI_CB_IO_LIMIT_1_HI 0x3a +#define PCI_CB_IO_RANGE_MASK (~0x03UL) +/* 0x3c-0x3d are same as for htype 0 */ +#define PCI_CB_BRIDGE_CONTROL 0x3e +#define PCI_CB_BRIDGE_CTL_PARITY 0x01 /* Similar to standard bridge control register */ +#define PCI_CB_BRIDGE_CTL_SERR 0x02 +#define PCI_CB_BRIDGE_CTL_ISA 0x04 +#define PCI_CB_BRIDGE_CTL_VGA 0x08 +#define PCI_CB_BRIDGE_CTL_MASTER_ABORT 0x20 +#define PCI_CB_BRIDGE_CTL_CB_RESET 0x40 /* CardBus reset */ +#define PCI_CB_BRIDGE_CTL_16BIT_INT 0x80 /* Enable interrupt for 16-bit cards */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM0 0x100 /* Prefetch enable for both memory regions */ +#define PCI_CB_BRIDGE_CTL_PREFETCH_MEM1 0x200 +#define PCI_CB_BRIDGE_CTL_POST_WRITES 0x400 +#define PCI_CB_SUBSYSTEM_VENDOR_ID 0x40 +#define PCI_CB_SUBSYSTEM_ID 0x42 +#define PCI_CB_LEGACY_MODE_BASE 0x44 /* 16-bit PC Card legacy mode base address (ExCa) */ +/* 0x48-0x7f reserved */ + +/* Capability lists */ + +#define PCI_CAP_LIST_ID 0 /* Capability ID */ +#define PCI_CAP_ID_PM 0x01 /* Power Management */ +#define PCI_CAP_ID_AGP 0x02 /* Accelerated Graphics Port */ +#define PCI_CAP_ID_VPD 0x03 /* Vital Product Data */ +#define PCI_CAP_ID_SLOTID 0x04 /* Slot Identification */ +#define PCI_CAP_ID_MSI 0x05 /* Message Signalled Interrupts */ +#define PCI_CAP_ID_CHSWP 0x06 /* CompactPCI HotSwap */ +#define PCI_CAP_ID_PCIX 0x07 /* PCI-X */ +#define PCI_CAP_ID_HT 0x08 /* HyperTransport */ +#define PCI_CAP_ID_VNDR 0x09 /* Vendor-Specific */ +#define PCI_CAP_ID_DBG 0x0A /* Debug port */ +#define PCI_CAP_ID_CCRC 0x0B /* CompactPCI Central Resource Control */ +#define PCI_CAP_ID_SHPC 0x0C /* PCI Standard Hot-Plug Controller */ +#define PCI_CAP_ID_SSVID 0x0D /* Bridge subsystem vendor/device ID */ +#define PCI_CAP_ID_AGP3 0x0E /* AGP Target PCI-PCI bridge */ +#define PCI_CAP_ID_SECDEV 0x0F /* Secure Device */ +#define PCI_CAP_ID_EXP 0x10 /* PCI Express */ +#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */ +#define PCI_CAP_ID_SATA 0x12 /* SATA Data/Index Conf. */ +#define PCI_CAP_ID_AF 0x13 /* PCI Advanced Features */ +#define PCI_CAP_ID_EA 0x14 /* PCI Enhanced Allocation */ +#define PCI_CAP_ID_MAX PCI_CAP_ID_EA +#define PCI_CAP_LIST_NEXT 1 /* Next capability in the list */ +#define PCI_CAP_FLAGS 2 /* Capability defined flags (16 bits) */ +#define PCI_CAP_SIZEOF 4 + +/* Power Management Registers */ + +#define PCI_PM_PMC 2 /* PM Capabilities Register */ +#define PCI_PM_CAP_VER_MASK 0x0007 /* Version */ +#define PCI_PM_CAP_PME_CLOCK 0x0008 /* PME clock required */ +#define PCI_PM_CAP_RESERVED 0x0010 /* Reserved field */ +#define PCI_PM_CAP_DSI 0x0020 /* Device specific initialization */ +#define PCI_PM_CAP_AUX_POWER 0x01C0 /* Auxiliary power support mask */ +#define PCI_PM_CAP_D1 0x0200 /* D1 power state support */ +#define PCI_PM_CAP_D2 0x0400 /* D2 power state support */ +#define PCI_PM_CAP_PME 0x0800 /* PME pin supported */ +#define PCI_PM_CAP_PME_MASK 0xF800 /* PME Mask of all supported states */ +#define PCI_PM_CAP_PME_D0 0x0800 /* PME# from D0 */ +#define PCI_PM_CAP_PME_D1 0x1000 /* PME# from D1 */ +#define PCI_PM_CAP_PME_D2 0x2000 /* PME# from D2 */ +#define PCI_PM_CAP_PME_D3 0x4000 /* PME# from D3 (hot) */ +#define PCI_PM_CAP_PME_D3cold 0x8000 /* PME# from D3 (cold) */ +#define PCI_PM_CAP_PME_SHIFT 11 /* Start of the PME Mask in PMC */ +#define PCI_PM_CTRL 4 /* PM control and status register */ +#define PCI_PM_CTRL_STATE_MASK 0x0003 /* Current power state (D0 to D3) */ +#define PCI_PM_CTRL_NO_SOFT_RESET 0x0008 /* No reset for D3hot->D0 */ +#define PCI_PM_CTRL_PME_ENABLE 0x0100 /* PME pin enable */ +#define PCI_PM_CTRL_DATA_SEL_MASK 0x1e00 /* Data select (??) */ +#define PCI_PM_CTRL_DATA_SCALE_MASK 0x6000 /* Data scale (??) */ +#define PCI_PM_CTRL_PME_STATUS 0x8000 /* PME pin status */ +#define PCI_PM_PPB_EXTENSIONS 6 /* PPB support extensions (??) */ +#define PCI_PM_PPB_B2_B3 0x40 /* Stop clock when in D3hot (??) */ +#define PCI_PM_BPCC_ENABLE 0x80 /* Bus power/clock control enable (??) */ +#define PCI_PM_DATA_REGISTER 7 /* (??) */ +#define PCI_PM_SIZEOF 8 + +/* AGP registers */ + +#define PCI_AGP_VERSION 2 /* BCD version number */ +#define PCI_AGP_RFU 3 /* Rest of capability flags */ +#define PCI_AGP_STATUS 4 /* Status register */ +#define PCI_AGP_STATUS_RQ_MASK 0xff000000 /* Maximum number of requests - 1 */ +#define PCI_AGP_STATUS_SBA 0x0200 /* Sideband addressing supported */ +#define PCI_AGP_STATUS_64BIT 0x0020 /* 64-bit addressing supported */ +#define PCI_AGP_STATUS_FW 0x0010 /* FW transfers supported */ +#define PCI_AGP_STATUS_RATE4 0x0004 /* 4x transfer rate supported */ +#define PCI_AGP_STATUS_RATE2 0x0002 /* 2x transfer rate supported */ +#define PCI_AGP_STATUS_RATE1 0x0001 /* 1x transfer rate supported */ +#define PCI_AGP_COMMAND 8 /* Control register */ +#define PCI_AGP_COMMAND_RQ_MASK 0xff000000 /* Master: Maximum number of requests */ +#define PCI_AGP_COMMAND_SBA 0x0200 /* Sideband addressing enabled */ +#define PCI_AGP_COMMAND_AGP 0x0100 /* Allow processing of AGP transactions */ +#define PCI_AGP_COMMAND_64BIT 0x0020 /* Allow processing of 64-bit addresses */ +#define PCI_AGP_COMMAND_FW 0x0010 /* Force FW transfers */ +#define PCI_AGP_COMMAND_RATE4 0x0004 /* Use 4x rate */ +#define PCI_AGP_COMMAND_RATE2 0x0002 /* Use 2x rate */ +#define PCI_AGP_COMMAND_RATE1 0x0001 /* Use 1x rate */ +#define PCI_AGP_SIZEOF 12 + +/* Vital Product Data */ + +#define PCI_VPD_ADDR 2 /* Address to access (15 bits!) */ +#define PCI_VPD_ADDR_MASK 0x7fff /* Address mask */ +#define PCI_VPD_ADDR_F 0x8000 /* Write 0, 1 indicates completion */ +#define PCI_VPD_DATA 4 /* 32-bits of data returned here */ +#define PCI_CAP_VPD_SIZEOF 8 + +/* Slot Identification */ + +#define PCI_SID_ESR 2 /* Expansion Slot Register */ +#define PCI_SID_ESR_NSLOTS 0x1f /* Number of expansion slots available */ +#define PCI_SID_ESR_FIC 0x20 /* First In Chassis Flag */ +#define PCI_SID_CHASSIS_NR 3 /* Chassis Number */ + +/* Message Signalled Interrupt registers */ + +#define PCI_MSI_FLAGS 2 /* Message Control */ +#define PCI_MSI_FLAGS_ENABLE 0x0001 /* MSI feature enabled */ +#define PCI_MSI_FLAGS_QMASK 0x000e /* Maximum queue size available */ +#define PCI_MSI_FLAGS_QSIZE 0x0070 /* Message queue size configured */ +#define PCI_MSI_FLAGS_64BIT 0x0080 /* 64-bit addresses allowed */ +#define PCI_MSI_FLAGS_MASKBIT 0x0100 /* Per-vector masking capable */ +#define PCI_MSI_RFU 3 /* Rest of capability flags */ +#define PCI_MSI_ADDRESS_LO 4 /* Lower 32 bits */ +#define PCI_MSI_ADDRESS_HI 8 /* Upper 32 bits (if PCI_MSI_FLAGS_64BIT set) */ +#define PCI_MSI_DATA_32 8 /* 16 bits of data for 32-bit devices */ +#define PCI_MSI_MASK_32 12 /* Mask bits register for 32-bit devices */ +#define PCI_MSI_PENDING_32 16 /* Pending intrs for 32-bit devices */ +#define PCI_MSI_DATA_64 12 /* 16 bits of data for 64-bit devices */ +#define PCI_MSI_MASK_64 16 /* Mask bits register for 64-bit devices */ +#define PCI_MSI_PENDING_64 20 /* Pending intrs for 64-bit devices */ + +/* MSI-X registers (in MSI-X capability) */ +#define PCI_MSIX_FLAGS 2 /* Message Control */ +#define PCI_MSIX_FLAGS_QSIZE 0x07FF /* Table size */ +#define PCI_MSIX_FLAGS_MASKALL 0x4000 /* Mask all vectors for this function */ +#define PCI_MSIX_FLAGS_ENABLE 0x8000 /* MSI-X enable */ +#define PCI_MSIX_TABLE 4 /* Table offset */ +#define PCI_MSIX_TABLE_BIR 0x00000007 /* BAR index */ +#define PCI_MSIX_TABLE_OFFSET 0xfffffff8 /* Offset into specified BAR */ +#define PCI_MSIX_PBA 8 /* Pending Bit Array offset */ +#define PCI_MSIX_PBA_BIR 0x00000007 /* BAR index */ +#define PCI_MSIX_PBA_OFFSET 0xfffffff8 /* Offset into specified BAR */ +#define PCI_MSIX_FLAGS_BIRMASK PCI_MSIX_PBA_BIR /* deprecated */ +#define PCI_CAP_MSIX_SIZEOF 12 /* size of MSIX registers */ + +/* MSI-X Table entry format (in memory mapped by a BAR) */ +#define PCI_MSIX_ENTRY_SIZE 16 +#define PCI_MSIX_ENTRY_LOWER_ADDR 0 /* Message Address */ +#define PCI_MSIX_ENTRY_UPPER_ADDR 4 /* Message Upper Address */ +#define PCI_MSIX_ENTRY_DATA 8 /* Message Data */ +#define PCI_MSIX_ENTRY_VECTOR_CTRL 12 /* Vector Control */ +#define PCI_MSIX_ENTRY_CTRL_MASKBIT 0x00000001 + +/* CompactPCI Hotswap Register */ + +#define PCI_CHSWP_CSR 2 /* Control and Status Register */ +#define PCI_CHSWP_DHA 0x01 /* Device Hiding Arm */ +#define PCI_CHSWP_EIM 0x02 /* ENUM# Signal Mask */ +#define PCI_CHSWP_PIE 0x04 /* Pending Insert or Extract */ +#define PCI_CHSWP_LOO 0x08 /* LED On / Off */ +#define PCI_CHSWP_PI 0x30 /* Programming Interface */ +#define PCI_CHSWP_EXT 0x40 /* ENUM# status - extraction */ +#define PCI_CHSWP_INS 0x80 /* ENUM# status - insertion */ + +/* PCI Advanced Feature registers */ + +#define PCI_AF_LENGTH 2 +#define PCI_AF_CAP 3 +#define PCI_AF_CAP_TP 0x01 +#define PCI_AF_CAP_FLR 0x02 +#define PCI_AF_CTRL 4 +#define PCI_AF_CTRL_FLR 0x01 +#define PCI_AF_STATUS 5 +#define PCI_AF_STATUS_TP 0x01 +#define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */ + +/* PCI Enhanced Allocation registers */ + +#define PCI_EA_NUM_ENT 2 /* Number of Capability Entries */ +#define PCI_EA_NUM_ENT_MASK 0x3f /* Num Entries Mask */ +#define PCI_EA_FIRST_ENT 4 /* First EA Entry in List */ +#define PCI_EA_FIRST_ENT_BRIDGE 8 /* First EA Entry for Bridges */ +#define PCI_EA_ES 0x00000007 /* Entry Size */ +#define PCI_EA_BEI 0x000000f0 /* BAR Equivalent Indicator */ + +/* EA fixed Secondary and Subordinate bus numbers for Bridge */ +#define PCI_EA_SEC_BUS_MASK 0xff +#define PCI_EA_SUB_BUS_MASK 0xff00 +#define PCI_EA_SUB_BUS_SHIFT 8 + +/* 0-5 map to BARs 0-5 respectively */ +#define PCI_EA_BEI_BAR0 0 +#define PCI_EA_BEI_BAR5 5 +#define PCI_EA_BEI_BRIDGE 6 /* Resource behind bridge */ +#define PCI_EA_BEI_ENI 7 /* Equivalent Not Indicated */ +#define PCI_EA_BEI_ROM 8 /* Expansion ROM */ +/* 9-14 map to VF BARs 0-5 respectively */ +#define PCI_EA_BEI_VF_BAR0 9 +#define PCI_EA_BEI_VF_BAR5 14 +#define PCI_EA_BEI_RESERVED 15 /* Reserved - Treat like ENI */ +#define PCI_EA_PP 0x0000ff00 /* Primary Properties */ +#define PCI_EA_SP 0x00ff0000 /* Secondary Properties */ +#define PCI_EA_P_MEM 0x00 /* Non-Prefetch Memory */ +#define PCI_EA_P_MEM_PREFETCH 0x01 /* Prefetchable Memory */ +#define PCI_EA_P_IO 0x02 /* I/O Space */ +#define PCI_EA_P_VF_MEM_PREFETCH 0x03 /* VF Prefetchable Memory */ +#define PCI_EA_P_VF_MEM 0x04 /* VF Non-Prefetch Memory */ +#define PCI_EA_P_BRIDGE_MEM 0x05 /* Bridge Non-Prefetch Memory */ +#define PCI_EA_P_BRIDGE_MEM_PREFETCH 0x06 /* Bridge Prefetchable Memory */ +#define PCI_EA_P_BRIDGE_IO 0x07 /* Bridge I/O Space */ +/* 0x08-0xfc reserved */ +#define PCI_EA_P_MEM_RESERVED 0xfd /* Reserved Memory */ +#define PCI_EA_P_IO_RESERVED 0xfe /* Reserved I/O Space */ +#define PCI_EA_P_UNAVAILABLE 0xff /* Entry Unavailable */ +#define PCI_EA_WRITABLE 0x40000000 /* Writable: 1 = RW, 0 = HwInit */ +#define PCI_EA_ENABLE 0x80000000 /* Enable for this entry */ +#define PCI_EA_BASE 4 /* Base Address Offset */ +#define PCI_EA_MAX_OFFSET 8 /* MaxOffset (resource length) */ +/* bit 0 is reserved */ +#define PCI_EA_IS_64 0x00000002 /* 64-bit field flag */ +#define PCI_EA_FIELD_MASK 0xfffffffc /* For Base & Max Offset */ + +/* PCI-X registers (Type 0 (non-bridge) devices) */ + +#define PCI_X_CMD 2 /* Modes & Features */ +#define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ +#define PCI_X_CMD_ERO 0x0002 /* Enable Relaxed Ordering */ +#define PCI_X_CMD_READ_512 0x0000 /* 512 byte maximum read byte count */ +#define PCI_X_CMD_READ_1K 0x0004 /* 1Kbyte maximum read byte count */ +#define PCI_X_CMD_READ_2K 0x0008 /* 2Kbyte maximum read byte count */ +#define PCI_X_CMD_READ_4K 0x000c /* 4Kbyte maximum read byte count */ +#define PCI_X_CMD_MAX_READ 0x000c /* Max Memory Read Byte Count */ + /* Max # of outstanding split transactions */ +#define PCI_X_CMD_SPLIT_1 0x0000 /* Max 1 */ +#define PCI_X_CMD_SPLIT_2 0x0010 /* Max 2 */ +#define PCI_X_CMD_SPLIT_3 0x0020 /* Max 3 */ +#define PCI_X_CMD_SPLIT_4 0x0030 /* Max 4 */ +#define PCI_X_CMD_SPLIT_8 0x0040 /* Max 8 */ +#define PCI_X_CMD_SPLIT_12 0x0050 /* Max 12 */ +#define PCI_X_CMD_SPLIT_16 0x0060 /* Max 16 */ +#define PCI_X_CMD_SPLIT_32 0x0070 /* Max 32 */ +#define PCI_X_CMD_MAX_SPLIT 0x0070 /* Max Outstanding Split Transactions */ +#define PCI_X_CMD_VERSION(x) (((x) >> 12) & 3) /* Version */ +#define PCI_X_STATUS 4 /* PCI-X capabilities */ +#define PCI_X_STATUS_DEVFN 0x000000ff /* A copy of devfn */ +#define PCI_X_STATUS_BUS 0x0000ff00 /* A copy of bus nr */ +#define PCI_X_STATUS_64BIT 0x00010000 /* 64-bit device */ +#define PCI_X_STATUS_133MHZ 0x00020000 /* 133 MHz capable */ +#define PCI_X_STATUS_SPL_DISC 0x00040000 /* Split Completion Discarded */ +#define PCI_X_STATUS_UNX_SPL 0x00080000 /* Unexpected Split Completion */ +#define PCI_X_STATUS_COMPLEX 0x00100000 /* Device Complexity */ +#define PCI_X_STATUS_MAX_READ 0x00600000 /* Designed Max Memory Read Count */ +#define PCI_X_STATUS_MAX_SPLIT 0x03800000 /* Designed Max Outstanding Split Transactions */ +#define PCI_X_STATUS_MAX_CUM 0x1c000000 /* Designed Max Cumulative Read Size */ +#define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */ +#define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */ +#define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */ +#define PCI_X_ECC_CSR 8 /* ECC control and status */ +#define PCI_CAP_PCIX_SIZEOF_V0 8 /* size of registers for Version 0 */ +#define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */ +#define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */ + +/* PCI-X registers (Type 1 (bridge) devices) */ + +#define PCI_X_BRIDGE_SSTATUS 2 /* Secondary Status */ +#define PCI_X_SSTATUS_64BIT 0x0001 /* Secondary AD interface is 64 bits */ +#define PCI_X_SSTATUS_133MHZ 0x0002 /* 133 MHz capable */ +#define PCI_X_SSTATUS_FREQ 0x03c0 /* Secondary Bus Mode and Frequency */ +#define PCI_X_SSTATUS_VERS 0x3000 /* PCI-X Capability Version */ +#define PCI_X_SSTATUS_V1 0x1000 /* Mode 2, not Mode 1 */ +#define PCI_X_SSTATUS_V2 0x2000 /* Mode 1 or Modes 1 and 2 */ +#define PCI_X_SSTATUS_266MHZ 0x4000 /* 266 MHz capable */ +#define PCI_X_SSTATUS_533MHZ 0x8000 /* 533 MHz capable */ +#define PCI_X_BRIDGE_STATUS 4 /* Bridge Status */ + +/* PCI Bridge Subsystem ID registers */ + +#define PCI_SSVID_VENDOR_ID 4 /* PCI Bridge subsystem vendor ID */ +#define PCI_SSVID_DEVICE_ID 6 /* PCI Bridge subsystem device ID */ + +/* PCI Express capability registers */ + +#define PCI_EXP_FLAGS 2 /* Capabilities register */ +#define PCI_EXP_FLAGS_VERS 0x000f /* Capability version */ +#define PCI_EXP_FLAGS_TYPE 0x00f0 /* Device/Port type */ +#define PCI_EXP_TYPE_ENDPOINT 0x0 /* Express Endpoint */ +#define PCI_EXP_TYPE_LEG_END 0x1 /* Legacy Endpoint */ +#define PCI_EXP_TYPE_ROOT_PORT 0x4 /* Root Port */ +#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */ +#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ +#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCIe to PCI/PCI-X Bridge */ +#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIe Bridge */ +#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ +#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */ +#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ +#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ +#define PCI_EXP_DEVCAP 4 /* Device capabilities */ +#define PCI_EXP_DEVCAP_PAYLOAD 0x00000007 /* Max_Payload_Size */ +#define PCI_EXP_DEVCAP_PHANTOM 0x00000018 /* Phantom functions */ +#define PCI_EXP_DEVCAP_EXT_TAG 0x00000020 /* Extended tags */ +#define PCI_EXP_DEVCAP_L0S 0x000001c0 /* L0s Acceptable Latency */ +#define PCI_EXP_DEVCAP_L1 0x00000e00 /* L1 Acceptable Latency */ +#define PCI_EXP_DEVCAP_ATN_BUT 0x00001000 /* Attention Button Present */ +#define PCI_EXP_DEVCAP_ATN_IND 0x00002000 /* Attention Indicator Present */ +#define PCI_EXP_DEVCAP_PWR_IND 0x00004000 /* Power Indicator Present */ +#define PCI_EXP_DEVCAP_RBER 0x00008000 /* Role-Based Error Reporting */ +#define PCI_EXP_DEVCAP_PWR_VAL 0x03fc0000 /* Slot Power Limit Value */ +#define PCI_EXP_DEVCAP_PWR_SCL 0x0c000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ +#define PCI_EXP_DEVCTL 8 /* Device Control */ +#define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ +#define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_FERE 0x0004 /* Fatal Error Reporting Enable */ +#define PCI_EXP_DEVCTL_URRE 0x0008 /* Unsupported Request Reporting En. */ +#define PCI_EXP_DEVCTL_RELAX_EN 0x0010 /* Enable relaxed ordering */ +#define PCI_EXP_DEVCTL_PAYLOAD 0x00e0 /* Max_Payload_Size */ +#define PCI_EXP_DEVCTL_EXT_TAG 0x0100 /* Extended Tag Field Enable */ +#define PCI_EXP_DEVCTL_PHANTOM 0x0200 /* Phantom Functions Enable */ +#define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ +#define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ +#define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ +#define PCI_EXP_DEVCTL_READRQ_128B 0x0000 /* 128 Bytes */ +#define PCI_EXP_DEVCTL_READRQ_256B 0x1000 /* 256 Bytes */ +#define PCI_EXP_DEVCTL_READRQ_512B 0x2000 /* 512 Bytes */ +#define PCI_EXP_DEVCTL_READRQ_1024B 0x3000 /* 1024 Bytes */ +#define PCI_EXP_DEVCTL_READRQ_2048B 0x4000 /* 2048 Bytes */ +#define PCI_EXP_DEVCTL_READRQ_4096B 0x5000 /* 4096 Bytes */ +#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ +#define PCI_EXP_DEVSTA 10 /* Device Status */ +#define PCI_EXP_DEVSTA_CED 0x0001 /* Correctable Error Detected */ +#define PCI_EXP_DEVSTA_NFED 0x0002 /* Non-Fatal Error Detected */ +#define PCI_EXP_DEVSTA_FED 0x0004 /* Fatal Error Detected */ +#define PCI_EXP_DEVSTA_URD 0x0008 /* Unsupported Request Detected */ +#define PCI_EXP_DEVSTA_AUXPD 0x0010 /* AUX Power Detected */ +#define PCI_EXP_DEVSTA_TRPND 0x0020 /* Transactions Pending */ +#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V1 12 /* v1 endpoints without link end here */ +#define PCI_EXP_LNKCAP 12 /* Link Capabilities */ +#define PCI_EXP_LNKCAP_SLS 0x0000000f /* Supported Link Speeds */ +#define PCI_EXP_LNKCAP_SLS_2_5GB 0x00000001 /* LNKCAP2 SLS Vector bit 0 */ +#define PCI_EXP_LNKCAP_SLS_5_0GB 0x00000002 /* LNKCAP2 SLS Vector bit 1 */ +#define PCI_EXP_LNKCAP_SLS_8_0GB 0x00000003 /* LNKCAP2 SLS Vector bit 2 */ +#define PCI_EXP_LNKCAP_SLS_16_0GB 0x00000004 /* LNKCAP2 SLS Vector bit 3 */ +#define PCI_EXP_LNKCAP_SLS_32_0GB 0x00000005 /* LNKCAP2 SLS Vector bit 4 */ +#define PCI_EXP_LNKCAP_MLW 0x000003f0 /* Maximum Link Width */ +#define PCI_EXP_LNKCAP_ASPMS 0x00000c00 /* ASPM Support */ +#define PCI_EXP_LNKCAP_L0SEL 0x00007000 /* L0s Exit Latency */ +#define PCI_EXP_LNKCAP_L1EL 0x00038000 /* L1 Exit Latency */ +#define PCI_EXP_LNKCAP_CLKPM 0x00040000 /* Clock Power Management */ +#define PCI_EXP_LNKCAP_SDERC 0x00080000 /* Surprise Down Error Reporting Capable */ +#define PCI_EXP_LNKCAP_DLLLARC 0x00100000 /* Data Link Layer Link Active Reporting Capable */ +#define PCI_EXP_LNKCAP_LBNC 0x00200000 /* Link Bandwidth Notification Capability */ +#define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ +#define PCI_EXP_LNKCTL 16 /* Link Control */ +#define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#define PCI_EXP_LNKCTL_ASPM_L0S 0x0001 /* L0s Enable */ +#define PCI_EXP_LNKCTL_ASPM_L1 0x0002 /* L1 Enable */ +#define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ +#define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ +#define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ +#define PCI_EXP_LNKCTL_CCC 0x0040 /* Common Clock Configuration */ +#define PCI_EXP_LNKCTL_ES 0x0080 /* Extended Synch */ +#define PCI_EXP_LNKCTL_CLKREQ_EN 0x0100 /* Enable clkreq */ +#define PCI_EXP_LNKCTL_HAWD 0x0200 /* Hardware Autonomous Width Disable */ +#define PCI_EXP_LNKCTL_LBMIE 0x0400 /* Link Bandwidth Management Interrupt Enable */ +#define PCI_EXP_LNKCTL_LABIE 0x0800 /* Link Autonomous Bandwidth Interrupt Enable */ +#define PCI_EXP_LNKSTA 18 /* Link Status */ +#define PCI_EXP_LNKSTA_CLS 0x000f /* Current Link Speed */ +#define PCI_EXP_LNKSTA_CLS_2_5GB 0x0001 /* Current Link Speed 2.5GT/s */ +#define PCI_EXP_LNKSTA_CLS_5_0GB 0x0002 /* Current Link Speed 5.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_8_0GB 0x0003 /* Current Link Speed 8.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_16_0GB 0x0004 /* Current Link Speed 16.0GT/s */ +#define PCI_EXP_LNKSTA_CLS_32_0GB 0x0005 /* Current Link Speed 32.0GT/s */ +#define PCI_EXP_LNKSTA_NLW 0x03f0 /* Negotiated Link Width */ +#define PCI_EXP_LNKSTA_NLW_X1 0x0010 /* Current Link Width x1 */ +#define PCI_EXP_LNKSTA_NLW_X2 0x0020 /* Current Link Width x2 */ +#define PCI_EXP_LNKSTA_NLW_X4 0x0040 /* Current Link Width x4 */ +#define PCI_EXP_LNKSTA_NLW_X8 0x0080 /* Current Link Width x8 */ +#define PCI_EXP_LNKSTA_NLW_SHIFT 4 /* start of NLW mask in link status */ +#define PCI_EXP_LNKSTA_LT 0x0800 /* Link Training */ +#define PCI_EXP_LNKSTA_SLC 0x1000 /* Slot Clock Configuration */ +#define PCI_EXP_LNKSTA_DLLLA 0x2000 /* Data Link Layer Link Active */ +#define PCI_EXP_LNKSTA_LBMS 0x4000 /* Link Bandwidth Management Status */ +#define PCI_EXP_LNKSTA_LABS 0x8000 /* Link Autonomous Bandwidth Status */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V1 20 /* v1 endpoints with link end here */ +#define PCI_EXP_SLTCAP 20 /* Slot Capabilities */ +#define PCI_EXP_SLTCAP_ABP 0x00000001 /* Attention Button Present */ +#define PCI_EXP_SLTCAP_PCP 0x00000002 /* Power Controller Present */ +#define PCI_EXP_SLTCAP_MRLSP 0x00000004 /* MRL Sensor Present */ +#define PCI_EXP_SLTCAP_AIP 0x00000008 /* Attention Indicator Present */ +#define PCI_EXP_SLTCAP_PIP 0x00000010 /* Power Indicator Present */ +#define PCI_EXP_SLTCAP_HPS 0x00000020 /* Hot-Plug Surprise */ +#define PCI_EXP_SLTCAP_HPC 0x00000040 /* Hot-Plug Capable */ +#define PCI_EXP_SLTCAP_SPLV 0x00007f80 /* Slot Power Limit Value */ +#define PCI_EXP_SLTCAP_SPLS 0x00018000 /* Slot Power Limit Scale */ +#define PCI_EXP_SLTCAP_EIP 0x00020000 /* Electromechanical Interlock Present */ +#define PCI_EXP_SLTCAP_NCCS 0x00040000 /* No Command Completed Support */ +#define PCI_EXP_SLTCAP_PSN 0xfff80000 /* Physical Slot Number */ +#define PCI_EXP_SLTCTL 24 /* Slot Control */ +#define PCI_EXP_SLTCTL_ABPE 0x0001 /* Attention Button Pressed Enable */ +#define PCI_EXP_SLTCTL_PFDE 0x0002 /* Power Fault Detected Enable */ +#define PCI_EXP_SLTCTL_MRLSCE 0x0004 /* MRL Sensor Changed Enable */ +#define PCI_EXP_SLTCTL_PDCE 0x0008 /* Presence Detect Changed Enable */ +#define PCI_EXP_SLTCTL_CCIE 0x0010 /* Command Completed Interrupt Enable */ +#define PCI_EXP_SLTCTL_HPIE 0x0020 /* Hot-Plug Interrupt Enable */ +#define PCI_EXP_SLTCTL_AIC 0x00c0 /* Attention Indicator Control */ +#define PCI_EXP_SLTCTL_ATTN_IND_SHIFT 6 /* Attention Indicator shift */ +#define PCI_EXP_SLTCTL_ATTN_IND_ON 0x0040 /* Attention Indicator on */ +#define PCI_EXP_SLTCTL_ATTN_IND_BLINK 0x0080 /* Attention Indicator blinking */ +#define PCI_EXP_SLTCTL_ATTN_IND_OFF 0x00c0 /* Attention Indicator off */ +#define PCI_EXP_SLTCTL_PIC 0x0300 /* Power Indicator Control */ +#define PCI_EXP_SLTCTL_PWR_IND_ON 0x0100 /* Power Indicator on */ +#define PCI_EXP_SLTCTL_PWR_IND_BLINK 0x0200 /* Power Indicator blinking */ +#define PCI_EXP_SLTCTL_PWR_IND_OFF 0x0300 /* Power Indicator off */ +#define PCI_EXP_SLTCTL_PCC 0x0400 /* Power Controller Control */ +#define PCI_EXP_SLTCTL_PWR_ON 0x0000 /* Power On */ +#define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */ +#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */ +#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */ +#define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */ +#define PCI_EXP_SLTSTA 26 /* Slot Status */ +#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */ +#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */ +#define PCI_EXP_SLTSTA_MRLSC 0x0004 /* MRL Sensor Changed */ +#define PCI_EXP_SLTSTA_PDC 0x0008 /* Presence Detect Changed */ +#define PCI_EXP_SLTSTA_CC 0x0010 /* Command Completed */ +#define PCI_EXP_SLTSTA_MRLSS 0x0020 /* MRL Sensor State */ +#define PCI_EXP_SLTSTA_PDS 0x0040 /* Presence Detect State */ +#define PCI_EXP_SLTSTA_EIS 0x0080 /* Electromechanical Interlock Status */ +#define PCI_EXP_SLTSTA_DLLSC 0x0100 /* Data Link Layer State Changed */ +#define PCI_EXP_RTCTL 28 /* Root Control */ +#define PCI_EXP_RTCTL_SECEE 0x0001 /* System Error on Correctable Error */ +#define PCI_EXP_RTCTL_SENFEE 0x0002 /* System Error on Non-Fatal Error */ +#define PCI_EXP_RTCTL_SEFEE 0x0004 /* System Error on Fatal Error */ +#define PCI_EXP_RTCTL_PMEIE 0x0008 /* PME Interrupt Enable */ +#define PCI_EXP_RTCTL_CRSSVE 0x0010 /* CRS Software Visibility Enable */ +#define PCI_EXP_RTCAP 30 /* Root Capabilities */ +#define PCI_EXP_RTCAP_CRSVIS 0x0001 /* CRS Software Visibility capability */ +#define PCI_EXP_RTSTA 32 /* Root Status */ +#define PCI_EXP_RTSTA_PME 0x00010000 /* PME status */ +#define PCI_EXP_RTSTA_PENDING 0x00020000 /* PME pending */ +/* + * The Device Capabilities 2, Device Status 2, Device Control 2, + * Link Capabilities 2, Link Status 2, Link Control 2, + * Slot Capabilities 2, Slot Status 2, and Slot Control 2 registers + * are only present on devices with PCIe Capability version 2. + * Use pcie_capability_read_word() and similar interfaces to use them + * safely. + */ +#define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ +#define PCI_EXP_DEVCAP2_COMP_TMOUT_DIS 0x00000010 /* Completion Timeout Disable supported */ +#define PCI_EXP_DEVCAP2_ARI 0x00000020 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCAP2_ATOMIC_ROUTE 0x00000040 /* Atomic Op routing */ +#define PCI_EXP_DEVCAP2_ATOMIC_COMP32 0x00000080 /* 32b AtomicOp completion */ +#define PCI_EXP_DEVCAP2_ATOMIC_COMP64 0x00000100 /* 64b AtomicOp completion */ +#define PCI_EXP_DEVCAP2_ATOMIC_COMP128 0x00000200 /* 128b AtomicOp completion */ +#define PCI_EXP_DEVCAP2_LTR 0x00000800 /* Latency tolerance reporting */ +#define PCI_EXP_DEVCAP2_OBFF_MASK 0x000c0000 /* OBFF support mechanism */ +#define PCI_EXP_DEVCAP2_OBFF_MSG 0x00040000 /* New message signaling */ +#define PCI_EXP_DEVCAP2_OBFF_WAKE 0x00080000 /* Re-use WAKE# for OBFF */ +#define PCI_EXP_DEVCAP2_EE_PREFIX 0x00200000 /* End-End TLP Prefix */ +#define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ +#define PCI_EXP_DEVCTL2_COMP_TIMEOUT 0x000f /* Completion Timeout Value */ +#define PCI_EXP_DEVCTL2_COMP_TMOUT_DIS 0x0010 /* Completion Timeout Disable */ +#define PCI_EXP_DEVCTL2_ARI 0x0020 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCTL2_ATOMIC_REQ 0x0040 /* Set Atomic requests */ +#define PCI_EXP_DEVCTL2_ATOMIC_EGRESS_BLOCK 0x0080 /* Block atomic egress */ +#define PCI_EXP_DEVCTL2_IDO_REQ_EN 0x0100 /* Allow IDO for requests */ +#define PCI_EXP_DEVCTL2_IDO_CMP_EN 0x0200 /* Allow IDO for completions */ +#define PCI_EXP_DEVCTL2_LTR_EN 0x0400 /* Enable LTR mechanism */ +#define PCI_EXP_DEVCTL2_OBFF_MSGA_EN 0x2000 /* Enable OBFF Message type A */ +#define PCI_EXP_DEVCTL2_OBFF_MSGB_EN 0x4000 /* Enable OBFF Message type B */ +#define PCI_EXP_DEVCTL2_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ +#define PCI_EXP_DEVSTA2 42 /* Device Status 2 */ +#define PCI_CAP_EXP_RC_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints without link end here */ +#define PCI_EXP_LNKCAP2 44 /* Link Capabilities 2 */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x00000002 /* Supported Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x00000004 /* Supported Speed 5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x00000008 /* Supported Speed 8GT/s */ +#define PCI_EXP_LNKCAP2_SLS_16_0GB 0x00000010 /* Supported Speed 16GT/s */ +#define PCI_EXP_LNKCAP2_SLS_32_0GB 0x00000020 /* Supported Speed 32GT/s */ +#define PCI_EXP_LNKCAP2_CROSSLINK 0x00000100 /* Crosslink supported */ +#define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ +#define PCI_EXP_LNKCTL2_TLS 0x000f +#define PCI_EXP_LNKCTL2_TLS_2_5GT 0x0001 /* Supported Speed 2.5GT/s */ +#define PCI_EXP_LNKCTL2_TLS_5_0GT 0x0002 /* Supported Speed 5GT/s */ +#define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */ +#define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */ +#define PCI_EXP_LNKCTL2_TLS_32_0GT 0x0005 /* Supported Speed 32GT/s */ +#define PCI_EXP_LNKCTL2_ENTER_COMP 0x0010 /* Enter Compliance */ +#define PCI_EXP_LNKCTL2_TX_MARGIN 0x0380 /* Transmit Margin */ +#define PCI_EXP_LNKCTL2_HASD 0x0020 /* HW Autonomous Speed Disable */ +#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ +#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */ +#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */ +#define PCI_EXP_SLTCAP2_IBPD 0x00000001 /* In-band PD Disable Supported */ +#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ +#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */ + +/* Extended Capabilities (PCI-X 2.0 and Express) */ +#define PCI_EXT_CAP_ID(header) (header & 0x0000ffff) +#define PCI_EXT_CAP_VER(header) ((header >> 16) & 0xf) +#define PCI_EXT_CAP_NEXT(header) ((header >> 20) & 0xffc) + +#define PCI_EXT_CAP_ID_ERR 0x01 /* Advanced Error Reporting */ +#define PCI_EXT_CAP_ID_VC 0x02 /* Virtual Channel Capability */ +#define PCI_EXT_CAP_ID_DSN 0x03 /* Device Serial Number */ +#define PCI_EXT_CAP_ID_PWR 0x04 /* Power Budgeting */ +#define PCI_EXT_CAP_ID_RCLD 0x05 /* Root Complex Link Declaration */ +#define PCI_EXT_CAP_ID_RCILC 0x06 /* Root Complex Internal Link Control */ +#define PCI_EXT_CAP_ID_RCEC 0x07 /* Root Complex Event Collector */ +#define PCI_EXT_CAP_ID_MFVC 0x08 /* Multi-Function VC Capability */ +#define PCI_EXT_CAP_ID_VC9 0x09 /* same as _VC */ +#define PCI_EXT_CAP_ID_RCRB 0x0A /* Root Complex RB? */ +#define PCI_EXT_CAP_ID_VNDR 0x0B /* Vendor-Specific */ +#define PCI_EXT_CAP_ID_CAC 0x0C /* Config Access - obsolete */ +#define PCI_EXT_CAP_ID_ACS 0x0D /* Access Control Services */ +#define PCI_EXT_CAP_ID_ARI 0x0E /* Alternate Routing ID */ +#define PCI_EXT_CAP_ID_ATS 0x0F /* Address Translation Services */ +#define PCI_EXT_CAP_ID_SRIOV 0x10 /* Single Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MRIOV 0x11 /* Multi Root I/O Virtualization */ +#define PCI_EXT_CAP_ID_MCAST 0x12 /* Multicast */ +#define PCI_EXT_CAP_ID_PRI 0x13 /* Page Request Interface */ +#define PCI_EXT_CAP_ID_AMD_XXX 0x14 /* Reserved for AMD */ +#define PCI_EXT_CAP_ID_REBAR 0x15 /* Resizable BAR */ +#define PCI_EXT_CAP_ID_DPA 0x16 /* Dynamic Power Allocation */ +#define PCI_EXT_CAP_ID_TPH 0x17 /* TPH Requester */ +#define PCI_EXT_CAP_ID_LTR 0x18 /* Latency Tolerance Reporting */ +#define PCI_EXT_CAP_ID_SECPCI 0x19 /* Secondary PCIe Capability */ +#define PCI_EXT_CAP_ID_PMUX 0x1A /* Protocol Multiplexing */ +#define PCI_EXT_CAP_ID_PASID 0x1B /* Process Address Space ID */ +#define PCI_EXT_CAP_ID_DPC 0x1D /* Downstream Port Containment */ +#define PCI_EXT_CAP_ID_L1SS 0x1E /* L1 PM Substates */ +#define PCI_EXT_CAP_ID_PTM 0x1F /* Precision Time Measurement */ +#define PCI_EXT_CAP_ID_DLF 0x25 /* Data Link Feature */ +#define PCI_EXT_CAP_ID_PL_16GT 0x26 /* Physical Layer 16.0 GT/s */ +#define PCI_EXT_CAP_ID_MAX PCI_EXT_CAP_ID_PL_16GT + +#define PCI_EXT_CAP_DSN_SIZEOF 12 +#define PCI_EXT_CAP_MCAST_ENDPOINT_SIZEOF 40 + +/* Advanced Error Reporting */ +#define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ +#define PCI_ERR_UNC_UND 0x00000001 /* Undefined */ +#define PCI_ERR_UNC_DLP 0x00000010 /* Data Link Protocol */ +#define PCI_ERR_UNC_SURPDN 0x00000020 /* Surprise Down */ +#define PCI_ERR_UNC_POISON_TLP 0x00001000 /* Poisoned TLP */ +#define PCI_ERR_UNC_FCP 0x00002000 /* Flow Control Protocol */ +#define PCI_ERR_UNC_COMP_TIME 0x00004000 /* Completion Timeout */ +#define PCI_ERR_UNC_COMP_ABORT 0x00008000 /* Completer Abort */ +#define PCI_ERR_UNC_UNX_COMP 0x00010000 /* Unexpected Completion */ +#define PCI_ERR_UNC_RX_OVER 0x00020000 /* Receiver Overflow */ +#define PCI_ERR_UNC_MALF_TLP 0x00040000 /* Malformed TLP */ +#define PCI_ERR_UNC_ECRC 0x00080000 /* ECRC Error Status */ +#define PCI_ERR_UNC_UNSUP 0x00100000 /* Unsupported Request */ +#define PCI_ERR_UNC_ACSV 0x00200000 /* ACS Violation */ +#define PCI_ERR_UNC_INTN 0x00400000 /* internal error */ +#define PCI_ERR_UNC_MCBTLP 0x00800000 /* MC blocked TLP */ +#define PCI_ERR_UNC_ATOMEG 0x01000000 /* Atomic egress blocked */ +#define PCI_ERR_UNC_TLPPRE 0x02000000 /* TLP prefix blocked */ +#define PCI_ERR_UNCOR_MASK 8 /* Uncorrectable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_UNCOR_SEVER 12 /* Uncorrectable Error Severity */ + /* Same bits as above */ +#define PCI_ERR_COR_STATUS 16 /* Correctable Error Status */ +#define PCI_ERR_COR_RCVR 0x00000001 /* Receiver Error Status */ +#define PCI_ERR_COR_BAD_TLP 0x00000040 /* Bad TLP Status */ +#define PCI_ERR_COR_BAD_DLLP 0x00000080 /* Bad DLLP Status */ +#define PCI_ERR_COR_REP_ROLL 0x00000100 /* REPLAY_NUM Rollover */ +#define PCI_ERR_COR_REP_TIMER 0x00001000 /* Replay Timer Timeout */ +#define PCI_ERR_COR_ADV_NFAT 0x00002000 /* Advisory Non-Fatal */ +#define PCI_ERR_COR_INTERNAL 0x00004000 /* Corrected Internal */ +#define PCI_ERR_COR_LOG_OVER 0x00008000 /* Header Log Overflow */ +#define PCI_ERR_COR_MASK 20 /* Correctable Error Mask */ + /* Same bits as above */ +#define PCI_ERR_CAP 24 /* Advanced Error Capabilities */ +#define PCI_ERR_CAP_FEP(x) ((x) & 31) /* First Error Pointer */ +#define PCI_ERR_CAP_ECRC_GENC 0x00000020 /* ECRC Generation Capable */ +#define PCI_ERR_CAP_ECRC_GENE 0x00000040 /* ECRC Generation Enable */ +#define PCI_ERR_CAP_ECRC_CHKC 0x00000080 /* ECRC Check Capable */ +#define PCI_ERR_CAP_ECRC_CHKE 0x00000100 /* ECRC Check Enable */ +#define PCI_ERR_HEADER_LOG 28 /* Header Log Register (16 bytes) */ +#define PCI_ERR_ROOT_COMMAND 44 /* Root Error Command */ +#define PCI_ERR_ROOT_CMD_COR_EN 0x00000001 /* Correctable Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_NONFATAL_EN 0x00000002 /* Non-Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_CMD_FATAL_EN 0x00000004 /* Fatal Err Reporting Enable */ +#define PCI_ERR_ROOT_STATUS 48 +#define PCI_ERR_ROOT_COR_RCV 0x00000001 /* ERR_COR Received */ +#define PCI_ERR_ROOT_MULTI_COR_RCV 0x00000002 /* Multiple ERR_COR */ +#define PCI_ERR_ROOT_UNCOR_RCV 0x00000004 /* ERR_FATAL/NONFATAL */ +#define PCI_ERR_ROOT_MULTI_UNCOR_RCV 0x00000008 /* Multiple FATAL/NONFATAL */ +#define PCI_ERR_ROOT_FIRST_FATAL 0x00000010 /* First UNC is Fatal */ +#define PCI_ERR_ROOT_NONFATAL_RCV 0x00000020 /* Non-Fatal Received */ +#define PCI_ERR_ROOT_FATAL_RCV 0x00000040 /* Fatal Received */ +#define PCI_ERR_ROOT_AER_IRQ 0xf8000000 /* Advanced Error Interrupt Message Number */ +#define PCI_ERR_ROOT_ERR_SRC 52 /* Error Source Identification */ + +/* Virtual Channel */ +#define PCI_VC_PORT_CAP1 4 +#define PCI_VC_CAP1_EVCC 0x00000007 /* extended VC count */ +#define PCI_VC_CAP1_LPEVCC 0x00000070 /* low prio extended VC count */ +#define PCI_VC_CAP1_ARB_SIZE 0x00000c00 +#define PCI_VC_PORT_CAP2 8 +#define PCI_VC_CAP2_32_PHASE 0x00000002 +#define PCI_VC_CAP2_64_PHASE 0x00000004 +#define PCI_VC_CAP2_128_PHASE 0x00000008 +#define PCI_VC_CAP2_ARB_OFF 0xff000000 +#define PCI_VC_PORT_CTRL 12 +#define PCI_VC_PORT_CTRL_LOAD_TABLE 0x00000001 +#define PCI_VC_PORT_STATUS 14 +#define PCI_VC_PORT_STATUS_TABLE 0x00000001 +#define PCI_VC_RES_CAP 16 +#define PCI_VC_RES_CAP_32_PHASE 0x00000002 +#define PCI_VC_RES_CAP_64_PHASE 0x00000004 +#define PCI_VC_RES_CAP_128_PHASE 0x00000008 +#define PCI_VC_RES_CAP_128_PHASE_TB 0x00000010 +#define PCI_VC_RES_CAP_256_PHASE 0x00000020 +#define PCI_VC_RES_CAP_ARB_OFF 0xff000000 +#define PCI_VC_RES_CTRL 20 +#define PCI_VC_RES_CTRL_LOAD_TABLE 0x00010000 +#define PCI_VC_RES_CTRL_ARB_SELECT 0x000e0000 +#define PCI_VC_RES_CTRL_ID 0x07000000 +#define PCI_VC_RES_CTRL_ENABLE 0x80000000 +#define PCI_VC_RES_STATUS 26 +#define PCI_VC_RES_STATUS_TABLE 0x00000001 +#define PCI_VC_RES_STATUS_NEGO 0x00000002 +#define PCI_CAP_VC_BASE_SIZEOF 0x10 +#define PCI_CAP_VC_PER_VC_SIZEOF 0x0C + +/* Power Budgeting */ +#define PCI_PWR_DSR 4 /* Data Select Register */ +#define PCI_PWR_DATA 8 /* Data Register */ +#define PCI_PWR_DATA_BASE(x) ((x) & 0xff) /* Base Power */ +#define PCI_PWR_DATA_SCALE(x) (((x) >> 8) & 3) /* Data Scale */ +#define PCI_PWR_DATA_PM_SUB(x) (((x) >> 10) & 7) /* PM Sub State */ +#define PCI_PWR_DATA_PM_STATE(x) (((x) >> 13) & 3) /* PM State */ +#define PCI_PWR_DATA_TYPE(x) (((x) >> 15) & 7) /* Type */ +#define PCI_PWR_DATA_RAIL(x) (((x) >> 18) & 7) /* Power Rail */ +#define PCI_PWR_CAP 12 /* Capability */ +#define PCI_PWR_CAP_BUDGET(x) ((x) & 1) /* Included in system budget */ +#define PCI_EXT_CAP_PWR_SIZEOF 16 + +/* Vendor-Specific (VSEC, PCI_EXT_CAP_ID_VNDR) */ +#define PCI_VNDR_HEADER 4 /* Vendor-Specific Header */ +#define PCI_VNDR_HEADER_ID(x) ((x) & 0xffff) +#define PCI_VNDR_HEADER_REV(x) (((x) >> 16) & 0xf) +#define PCI_VNDR_HEADER_LEN(x) (((x) >> 20) & 0xfff) + +/* + * HyperTransport sub capability types + * + * Unfortunately there are both 3 bit and 5 bit capability types defined + * in the HT spec, catering for that is a little messy. You probably don't + * want to use these directly, just use pci_find_ht_capability() and it + * will do the right thing for you. + */ +#define HT_3BIT_CAP_MASK 0xE0 +#define HT_CAPTYPE_SLAVE 0x00 /* Slave/Primary link configuration */ +#define HT_CAPTYPE_HOST 0x20 /* Host/Secondary link configuration */ + +#define HT_5BIT_CAP_MASK 0xF8 +#define HT_CAPTYPE_IRQ 0x80 /* IRQ Configuration */ +#define HT_CAPTYPE_REMAPPING_40 0xA0 /* 40 bit address remapping */ +#define HT_CAPTYPE_REMAPPING_64 0xA2 /* 64 bit address remapping */ +#define HT_CAPTYPE_UNITID_CLUMP 0x90 /* Unit ID clumping */ +#define HT_CAPTYPE_EXTCONF 0x98 /* Extended Configuration Space Access */ +#define HT_CAPTYPE_MSI_MAPPING 0xA8 /* MSI Mapping Capability */ +#define HT_MSI_FLAGS 0x02 /* Offset to flags */ +#define HT_MSI_FLAGS_ENABLE 0x1 /* Mapping enable */ +#define HT_MSI_FLAGS_FIXED 0x2 /* Fixed mapping only */ +#define HT_MSI_FIXED_ADDR 0x00000000FEE00000ULL /* Fixed addr */ +#define HT_MSI_ADDR_LO 0x04 /* Offset to low addr bits */ +#define HT_MSI_ADDR_LO_MASK 0xFFF00000 /* Low address bit mask */ +#define HT_MSI_ADDR_HI 0x08 /* Offset to high addr bits */ +#define HT_CAPTYPE_DIRECT_ROUTE 0xB0 /* Direct routing configuration */ +#define HT_CAPTYPE_VCSET 0xB8 /* Virtual Channel configuration */ +#define HT_CAPTYPE_ERROR_RETRY 0xC0 /* Retry on error configuration */ +#define HT_CAPTYPE_GEN3 0xD0 /* Generation 3 HyperTransport configuration */ +#define HT_CAPTYPE_PM 0xE0 /* HyperTransport power management configuration */ +#define HT_CAP_SIZEOF_LONG 28 /* slave & primary */ +#define HT_CAP_SIZEOF_SHORT 24 /* host & secondary */ + +/* Alternative Routing-ID Interpretation */ +#define PCI_ARI_CAP 0x04 /* ARI Capability Register */ +#define PCI_ARI_CAP_MFVC 0x0001 /* MFVC Function Groups Capability */ +#define PCI_ARI_CAP_ACS 0x0002 /* ACS Function Groups Capability */ +#define PCI_ARI_CAP_NFN(x) (((x) >> 8) & 0xff) /* Next Function Number */ +#define PCI_ARI_CTRL 0x06 /* ARI Control Register */ +#define PCI_ARI_CTRL_MFVC 0x0001 /* MFVC Function Groups Enable */ +#define PCI_ARI_CTRL_ACS 0x0002 /* ACS Function Groups Enable */ +#define PCI_ARI_CTRL_FG(x) (((x) >> 4) & 7) /* Function Group */ +#define PCI_EXT_CAP_ARI_SIZEOF 8 + +/* Address Translation Service */ +#define PCI_ATS_CAP 0x04 /* ATS Capability Register */ +#define PCI_ATS_CAP_QDEP(x) ((x) & 0x1f) /* Invalidate Queue Depth */ +#define PCI_ATS_MAX_QDEP 32 /* Max Invalidate Queue Depth */ +#define PCI_ATS_CAP_PAGE_ALIGNED 0x0020 /* Page Aligned Request */ +#define PCI_ATS_CTRL 0x06 /* ATS Control Register */ +#define PCI_ATS_CTRL_ENABLE 0x8000 /* ATS Enable */ +#define PCI_ATS_CTRL_STU(x) ((x) & 0x1f) /* Smallest Translation Unit */ +#define PCI_ATS_MIN_STU 12 /* shift of minimum STU block */ +#define PCI_EXT_CAP_ATS_SIZEOF 8 + +/* Page Request Interface */ +#define PCI_PRI_CTRL 0x04 /* PRI control register */ +#define PCI_PRI_CTRL_ENABLE 0x0001 /* Enable */ +#define PCI_PRI_CTRL_RESET 0x0002 /* Reset */ +#define PCI_PRI_STATUS 0x06 /* PRI status register */ +#define PCI_PRI_STATUS_RF 0x0001 /* Response Failure */ +#define PCI_PRI_STATUS_UPRGI 0x0002 /* Unexpected PRG index */ +#define PCI_PRI_STATUS_STOPPED 0x0100 /* PRI Stopped */ +#define PCI_PRI_STATUS_PASID 0x8000 /* PRG Response PASID Required */ +#define PCI_PRI_MAX_REQ 0x08 /* PRI max reqs supported */ +#define PCI_PRI_ALLOC_REQ 0x0c /* PRI max reqs allowed */ +#define PCI_EXT_CAP_PRI_SIZEOF 16 + +/* Process Address Space ID */ +#define PCI_PASID_CAP 0x04 /* PASID feature register */ +#define PCI_PASID_CAP_EXEC 0x02 /* Exec permissions Supported */ +#define PCI_PASID_CAP_PRIV 0x04 /* Privilege Mode Supported */ +#define PCI_PASID_CTRL 0x06 /* PASID control register */ +#define PCI_PASID_CTRL_ENABLE 0x01 /* Enable bit */ +#define PCI_PASID_CTRL_EXEC 0x02 /* Exec permissions Enable */ +#define PCI_PASID_CTRL_PRIV 0x04 /* Privilege Mode Enable */ +#define PCI_EXT_CAP_PASID_SIZEOF 8 + +/* Single Root I/O Virtualization */ +#define PCI_SRIOV_CAP 0x04 /* SR-IOV Capabilities */ +#define PCI_SRIOV_CAP_VFM 0x00000001 /* VF Migration Capable */ +#define PCI_SRIOV_CAP_INTR(x) ((x) >> 21) /* Interrupt Message Number */ +#define PCI_SRIOV_CTRL 0x08 /* SR-IOV Control */ +#define PCI_SRIOV_CTRL_VFE 0x0001 /* VF Enable */ +#define PCI_SRIOV_CTRL_VFM 0x0002 /* VF Migration Enable */ +#define PCI_SRIOV_CTRL_INTR 0x0004 /* VF Migration Interrupt Enable */ +#define PCI_SRIOV_CTRL_MSE 0x0008 /* VF Memory Space Enable */ +#define PCI_SRIOV_CTRL_ARI 0x0010 /* ARI Capable Hierarchy */ +#define PCI_SRIOV_STATUS 0x0a /* SR-IOV Status */ +#define PCI_SRIOV_STATUS_VFM 0x0001 /* VF Migration Status */ +#define PCI_SRIOV_INITIAL_VF 0x0c /* Initial VFs */ +#define PCI_SRIOV_TOTAL_VF 0x0e /* Total VFs */ +#define PCI_SRIOV_NUM_VF 0x10 /* Number of VFs */ +#define PCI_SRIOV_FUNC_LINK 0x12 /* Function Dependency Link */ +#define PCI_SRIOV_VF_OFFSET 0x14 /* First VF Offset */ +#define PCI_SRIOV_VF_STRIDE 0x16 /* Following VF Stride */ +#define PCI_SRIOV_VF_DID 0x1a /* VF Device ID */ +#define PCI_SRIOV_SUP_PGSIZE 0x1c /* Supported Page Sizes */ +#define PCI_SRIOV_SYS_PGSIZE 0x20 /* System Page Size */ +#define PCI_SRIOV_BAR 0x24 /* VF BAR0 */ +#define PCI_SRIOV_NUM_BARS 6 /* Number of VF BARs */ +#define PCI_SRIOV_VFM 0x3c /* VF Migration State Array Offset*/ +#define PCI_SRIOV_VFM_BIR(x) ((x) & 7) /* State BIR */ +#define PCI_SRIOV_VFM_OFFSET(x) ((x) & ~7) /* State Offset */ +#define PCI_SRIOV_VFM_UA 0x0 /* Inactive.Unavailable */ +#define PCI_SRIOV_VFM_MI 0x1 /* Dormant.MigrateIn */ +#define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ +#define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ +#define PCI_EXT_CAP_SRIOV_SIZEOF 64 + +#define PCI_LTR_MAX_SNOOP_LAT 0x4 +#define PCI_LTR_MAX_NOSNOOP_LAT 0x6 +#define PCI_LTR_VALUE_MASK 0x000003ff +#define PCI_LTR_SCALE_MASK 0x00001c00 +#define PCI_LTR_SCALE_SHIFT 10 +#define PCI_EXT_CAP_LTR_SIZEOF 8 + +/* Access Control Service */ +#define PCI_ACS_CAP 0x04 /* ACS Capability Register */ +#define PCI_ACS_SV 0x0001 /* Source Validation */ +#define PCI_ACS_TB 0x0002 /* Translation Blocking */ +#define PCI_ACS_RR 0x0004 /* P2P Request Redirect */ +#define PCI_ACS_CR 0x0008 /* P2P Completion Redirect */ +#define PCI_ACS_UF 0x0010 /* Upstream Forwarding */ +#define PCI_ACS_EC 0x0020 /* P2P Egress Control */ +#define PCI_ACS_DT 0x0040 /* Direct Translated P2P */ +#define PCI_ACS_EGRESS_BITS 0x05 /* ACS Egress Control Vector Size */ +#define PCI_ACS_CTRL 0x06 /* ACS Control Register */ +#define PCI_ACS_EGRESS_CTL_V 0x08 /* ACS Egress Control Vector */ + +#define PCI_VSEC_HDR 4 /* extended cap - vendor-specific */ +#define PCI_VSEC_HDR_LEN_SHIFT 20 /* shift for length field */ + +/* SATA capability */ +#define PCI_SATA_REGS 4 /* SATA REGs specifier */ +#define PCI_SATA_REGS_MASK 0xF /* location - BAR#/inline */ +#define PCI_SATA_REGS_INLINE 0xF /* REGS in config space */ +#define PCI_SATA_SIZEOF_SHORT 8 +#define PCI_SATA_SIZEOF_LONG 16 + +/* Resizable BARs */ +#define PCI_REBAR_CAP 4 /* capability register */ +#define PCI_REBAR_CAP_SIZES 0x00FFFFF0 /* supported BAR sizes */ +#define PCI_REBAR_CTRL 8 /* control register */ +#define PCI_REBAR_CTRL_BAR_IDX 0x00000007 /* BAR index */ +#define PCI_REBAR_CTRL_NBAR_MASK 0x000000E0 /* # of resizable BARs */ +#define PCI_REBAR_CTRL_NBAR_SHIFT 5 /* shift for # of BARs */ +#define PCI_REBAR_CTRL_BAR_SIZE 0x00001F00 /* BAR size */ +#define PCI_REBAR_CTRL_BAR_SHIFT 8 /* shift for BAR size */ + +/* Dynamic Power Allocation */ +#define PCI_DPA_CAP 4 /* capability register */ +#define PCI_DPA_CAP_SUBSTATE_MASK 0x1F /* # substates - 1 */ +#define PCI_DPA_BASE_SIZEOF 16 /* size with 0 substates */ + +/* TPH Requester */ +#define PCI_TPH_CAP 4 /* capability register */ +#define PCI_TPH_CAP_LOC_MASK 0x600 /* location mask */ +#define PCI_TPH_LOC_NONE 0x000 /* no location */ +#define PCI_TPH_LOC_CAP 0x200 /* in capability */ +#define PCI_TPH_LOC_MSIX 0x400 /* in MSI-X */ +#define PCI_TPH_CAP_ST_MASK 0x07FF0000 /* st table mask */ +#define PCI_TPH_CAP_ST_SHIFT 16 /* st table shift */ +#define PCI_TPH_BASE_SIZEOF 12 /* size with no st table */ + +/* Downstream Port Containment */ +#define PCI_EXP_DPC_CAP 4 /* DPC Capability */ +#define PCI_EXP_DPC_IRQ 0x001F /* Interrupt Message Number */ +#define PCI_EXP_DPC_CAP_RP_EXT 0x0020 /* Root Port Extensions */ +#define PCI_EXP_DPC_CAP_POISONED_TLP 0x0040 /* Poisoned TLP Egress Blocking Supported */ +#define PCI_EXP_DPC_CAP_SW_TRIGGER 0x0080 /* Software Triggering Supported */ +#define PCI_EXP_DPC_RP_PIO_LOG_SIZE 0x0F00 /* RP PIO Log Size */ +#define PCI_EXP_DPC_CAP_DL_ACTIVE 0x1000 /* ERR_COR signal on DL_Active supported */ + +#define PCI_EXP_DPC_CTL 6 /* DPC control */ +#define PCI_EXP_DPC_CTL_EN_FATAL 0x0001 /* Enable trigger on ERR_FATAL message */ +#define PCI_EXP_DPC_CTL_EN_NONFATAL 0x0002 /* Enable trigger on ERR_NONFATAL message */ +#define PCI_EXP_DPC_CTL_INT_EN 0x0008 /* DPC Interrupt Enable */ + +#define PCI_EXP_DPC_STATUS 8 /* DPC Status */ +#define PCI_EXP_DPC_STATUS_TRIGGER 0x0001 /* Trigger Status */ +#define PCI_EXP_DPC_STATUS_TRIGGER_RSN 0x0006 /* Trigger Reason */ +#define PCI_EXP_DPC_STATUS_INTERRUPT 0x0008 /* Interrupt Status */ +#define PCI_EXP_DPC_RP_BUSY 0x0010 /* Root Port Busy */ +#define PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT 0x0060 /* Trig Reason Extension */ + +#define PCI_EXP_DPC_SOURCE_ID 10 /* DPC Source Identifier */ + +#define PCI_EXP_DPC_RP_PIO_STATUS 0x0C /* RP PIO Status */ +#define PCI_EXP_DPC_RP_PIO_MASK 0x10 /* RP PIO Mask */ +#define PCI_EXP_DPC_RP_PIO_SEVERITY 0x14 /* RP PIO Severity */ +#define PCI_EXP_DPC_RP_PIO_SYSERROR 0x18 /* RP PIO SysError */ +#define PCI_EXP_DPC_RP_PIO_EXCEPTION 0x1C /* RP PIO Exception */ +#define PCI_EXP_DPC_RP_PIO_HEADER_LOG 0x20 /* RP PIO Header Log */ +#define PCI_EXP_DPC_RP_PIO_IMPSPEC_LOG 0x30 /* RP PIO ImpSpec Log */ +#define PCI_EXP_DPC_RP_PIO_TLPPREFIX_LOG 0x34 /* RP PIO TLP Prefix Log */ + +/* Precision Time Measurement */ +#define PCI_PTM_CAP 0x04 /* PTM Capability */ +#define PCI_PTM_CAP_REQ 0x00000001 /* Requester capable */ +#define PCI_PTM_CAP_ROOT 0x00000004 /* Root capable */ +#define PCI_PTM_GRANULARITY_MASK 0x0000FF00 /* Clock granularity */ +#define PCI_PTM_CTRL 0x08 /* PTM Control */ +#define PCI_PTM_CTRL_ENABLE 0x00000001 /* PTM enable */ +#define PCI_PTM_CTRL_ROOT 0x00000002 /* Root select */ + +/* ASPM L1 PM Substates */ +#define PCI_L1SS_CAP 0x04 /* Capabilities Register */ +#define PCI_L1SS_CAP_PCIPM_L1_2 0x00000001 /* PCI-PM L1.2 Supported */ +#define PCI_L1SS_CAP_PCIPM_L1_1 0x00000002 /* PCI-PM L1.1 Supported */ +#define PCI_L1SS_CAP_ASPM_L1_2 0x00000004 /* ASPM L1.2 Supported */ +#define PCI_L1SS_CAP_ASPM_L1_1 0x00000008 /* ASPM L1.1 Supported */ +#define PCI_L1SS_CAP_L1_PM_SS 0x00000010 /* L1 PM Substates Supported */ +#define PCI_L1SS_CAP_CM_RESTORE_TIME 0x0000ff00 /* Port Common_Mode_Restore_Time */ +#define PCI_L1SS_CAP_P_PWR_ON_SCALE 0x00030000 /* Port T_POWER_ON scale */ +#define PCI_L1SS_CAP_P_PWR_ON_VALUE 0x00f80000 /* Port T_POWER_ON value */ +#define PCI_L1SS_CTL1 0x08 /* Control 1 Register */ +#define PCI_L1SS_CTL1_PCIPM_L1_2 0x00000001 /* PCI-PM L1.2 Enable */ +#define PCI_L1SS_CTL1_PCIPM_L1_1 0x00000002 /* PCI-PM L1.1 Enable */ +#define PCI_L1SS_CTL1_ASPM_L1_2 0x00000004 /* ASPM L1.2 Enable */ +#define PCI_L1SS_CTL1_ASPM_L1_1 0x00000008 /* ASPM L1.1 Enable */ +#define PCI_L1SS_CTL1_L1SS_MASK 0x0000000f +#define PCI_L1SS_CTL1_CM_RESTORE_TIME 0x0000ff00 /* Common_Mode_Restore_Time */ +#define PCI_L1SS_CTL1_LTR_L12_TH_VALUE 0x03ff0000 /* LTR_L1.2_THRESHOLD_Value */ +#define PCI_L1SS_CTL1_LTR_L12_TH_SCALE 0xe0000000 /* LTR_L1.2_THRESHOLD_Scale */ +#define PCI_L1SS_CTL2 0x0c /* Control 2 Register */ + +/* Data Link Feature */ +#define PCI_DLF_CAP 0x04 /* Capabilities Register */ +#define PCI_DLF_EXCHANGE_ENABLE 0x80000000 /* Data Link Feature Exchange Enable */ + +/* Physical Layer 16.0 GT/s */ +#define PCI_PL_16GT_LE_CTRL 0x20 /* Lane Equalization Control Register */ +#define PCI_PL_16GT_LE_CTRL_DSP_TX_PRESET_MASK 0x0000000F +#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_MASK 0x000000F0 +#define PCI_PL_16GT_LE_CTRL_USP_TX_PRESET_SHIFT 4 + +#endif /* _RTE_PCI_REGS_H_ */ -- 2.17.1