DPDK patches and discussions
 help / color / mirror / Atom feed
From: alvinx.zhang@intel.com
To: jia.guo@intel.com
Cc: dev@dpdk.org, beilei.xing@intel.com
Subject: [dpdk-dev] [PATCH v3] net/i40e: fix modify the number of qps in VF
Date: Wed, 15 Jul 2020 15:28:11 +0800	[thread overview]
Message-ID: <20200715072811.12592-1-alvinx.zhang@intel.com> (raw)
In-Reply-To: <20200702032610.11076-1-alvinx.zhang@intel.com>

From: Alvin Zhang <alvinx.zhang@intel.com>

If a VF request PF to allocate more number of queue pairs, the PF will
free the queue pairs which have been allocated and reset the VF. So,
VF should stop to work until all the process is done. This patch modify
the process of the request queue pairs. To improve efficiency and
eliminate code redundancy, the promiscuous ops were also updated.

Fixes: c48eb308ed13 ("net/i40e: support VF request more queues")
Cc: stable@dpdk.org

Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
---

V2: Update git log and modify codes according to comments.
V3: All the code was refactored.
---
 drivers/net/i40e/i40e_ethdev_vf.c | 109 +++++++++++++++++++++-----------------
 1 file changed, 59 insertions(+), 50 deletions(-)

diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index eca716a..758d444 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -91,7 +91,8 @@ static int i40evf_vlan_filter_set(struct rte_eth_dev *dev,
 				  uint16_t vlan_id, int on);
 static int i40evf_vlan_offload_set(struct rte_eth_dev *dev, int mask);
 static void i40evf_dev_close(struct rte_eth_dev *dev);
-static int  i40evf_dev_reset(struct rte_eth_dev *dev);
+static int i40evf_dev_reset(struct rte_eth_dev *dev);
+static int i40evf_check_vf_reset_done(struct rte_eth_dev *dev);
 static int i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev);
 static int i40evf_dev_promiscuous_disable(struct rte_eth_dev *dev);
 static int i40evf_dev_allmulticast_enable(struct rte_eth_dev *dev);
@@ -519,10 +520,17 @@ struct rte_i40evf_xstats_name_off {
 
 	err = i40evf_execute_vf_cmd(dev, &args);
 
-	if (err)
-		PMD_DRV_LOG(ERR, "fail to execute command "
-			    "CONFIG_PROMISCUOUS_MODE");
-	return err;
+	if (err) {
+		if (err == I40E_NOT_SUPPORTED)
+			return -ENOTSUP;
+
+		PMD_DRV_LOG(ERR, "Failed to set promiscuous mode");
+		return -EAGAIN;
+	}
+
+	vf->promisc_unicast_enabled = enable_unicast;
+	vf->promisc_multicast_enabled = enable_multicast;
+	return 0;
 }
 
 static int
@@ -1081,12 +1089,31 @@ static int i40evf_dev_xstats_get(struct rte_eth_dev *dev,
 	args.out_size = I40E_AQ_BUF_SZ;
 
 	rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
+
 	err = i40evf_execute_vf_cmd(dev, &args);
-	if (err)
+	if (err != I40E_SUCCESS) {
+		rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
+				  i40evf_dev_alarm_handler, dev);
 		PMD_DRV_LOG(ERR, "fail to execute command OP_REQUEST_QUEUES");
+		return -EIO;
+	}
 
 	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
 			  i40evf_dev_alarm_handler, dev);
+
+	/*
+	 * The PF will issue a reset to the VF when change the number of
+	 * queues. The PF will set I40E_VFGEN_RSTAT to COMPLETE first, then
+	 * wait 10ms and set it to ACTIVE. In this duration, vf may not catch
+	 * the moment that COMPLETE is set. So, for vf, we'll try to wait a
+	 * long time.
+	 */
+	rte_delay_ms(100);
+
+	err = i40evf_check_vf_reset_done(dev);
+	if (err)
+		PMD_DRV_LOG(ERR, "VF is still resetting");
+
 	return err;
 }
 
@@ -1514,7 +1541,7 @@ static int i40evf_dev_xstats_get(struct rte_eth_dev *dev,
 	hw->bus.device = pci_dev->addr.devid;
 	hw->bus.func = pci_dev->addr.function;
 	hw->hw_addr = (void *)pci_dev->mem_resource[0].addr;
-	hw->adapter_stopped = 0;
+	hw->adapter_stopped = 1;
 	hw->adapter_closed = 0;
 
 	/* Pass the information to the rte_eth_dev_close() that it should also
@@ -1610,10 +1637,27 @@ static int eth_i40evf_pci_remove(struct rte_pci_device *pci_dev)
 	ad->tx_vec_allowed = true;
 
 	if (num_queue_pairs > vf->vsi_res->num_queue_pairs) {
-		int ret = 0;
+		struct i40e_hw *hw;
+		int ret;
+
+		/*
+		 * All VF resources will be reallocated, so change queue pairs
+		 * in secondary processes is forbidden.
+		 */
+		if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
+			PMD_DRV_LOG(ERR,
+				"For secondary processes, change queue pairs is forbidden!");
+			return -ENOTSUP;
+		}
 
+		hw  = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 		PMD_DRV_LOG(INFO, "change queue pairs from %u to %u",
 			    vf->vsi_res->num_queue_pairs, num_queue_pairs);
+		if (hw->adapter_stopped == 0) {
+			PMD_DRV_LOG(WARNING, "Device must be stopped first!");
+			return -EINVAL;
+		}
+
 		ret = i40evf_request_queues(dev, num_queue_pairs);
 		if (ret != 0)
 			return ret;
@@ -2182,68 +2226,32 @@ static int eth_i40evf_pci_remove(struct rte_pci_device *pci_dev)
 i40evf_dev_promiscuous_enable(struct rte_eth_dev *dev)
 {
 	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
-	int ret;
-
-	ret = i40evf_config_promisc(dev, 1, vf->promisc_multicast_enabled);
-	if (ret == 0)
-		vf->promisc_unicast_enabled = TRUE;
-	else if (ret == I40E_NOT_SUPPORTED)
-		ret = -ENOTSUP;
-	else
-		ret = -EAGAIN;
 
-	return ret;
+	return i40evf_config_promisc(dev, true, vf->promisc_multicast_enabled);
 }
 
 static int
 i40evf_dev_promiscuous_disable(struct rte_eth_dev *dev)
 {
 	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
-	int ret;
-
-	ret = i40evf_config_promisc(dev, 0, vf->promisc_multicast_enabled);
-	if (ret == 0)
-		vf->promisc_unicast_enabled = FALSE;
-	else if (ret == I40E_NOT_SUPPORTED)
-		ret = -ENOTSUP;
-	else
-		ret = -EAGAIN;
 
-	return ret;
+	return i40evf_config_promisc(dev, false, vf->promisc_multicast_enabled);
 }
 
 static int
 i40evf_dev_allmulticast_enable(struct rte_eth_dev *dev)
 {
 	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
-	int ret;
-
-	ret = i40evf_config_promisc(dev, vf->promisc_unicast_enabled, 1);
-	if (ret == 0)
-		vf->promisc_multicast_enabled = TRUE;
-	else if (ret == I40E_NOT_SUPPORTED)
-		ret = -ENOTSUP;
-	else
-		ret = -EAGAIN;
 
-	return ret;
+	return i40evf_config_promisc(dev, vf->promisc_unicast_enabled, true);
 }
 
 static int
 i40evf_dev_allmulticast_disable(struct rte_eth_dev *dev)
 {
 	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
-	int ret;
-
-	ret = i40evf_config_promisc(dev, vf->promisc_unicast_enabled, 0);
-	if (ret == 0)
-		vf->promisc_multicast_enabled = FALSE;
-	else if (ret == I40E_NOT_SUPPORTED)
-		ret = -ENOTSUP;
-	else
-		ret = -EAGAIN;
 
-	return ret;
+	return i40evf_config_promisc(dev, vf->promisc_unicast_enabled, false);
 }
 
 static int
@@ -2365,8 +2373,9 @@ static int eth_i40evf_pci_remove(struct rte_pci_device *pci_dev)
 	 * it is a workaround solution when work with kernel driver
 	 * and it is not the normal way
 	 */
-	i40evf_dev_promiscuous_disable(dev);
-	i40evf_dev_allmulticast_disable(dev);
+	if (vf->promisc_unicast_enabled || vf->promisc_multicast_enabled)
+		i40evf_config_promisc(dev, false, false);
+
 	rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
 
 	i40evf_reset_vf(dev);
-- 
1.8.3.1


  reply	other threads:[~2020-07-15  7:30 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-10 12:07 [dpdk-dev] [PATCH] net/i40e: fix modifying the number of queues alvinx.zhang
2020-06-21 13:36 ` Jeff Guo
2020-06-29  3:16   ` Zhang, AlvinX
2020-06-30  3:13     ` Jeff Guo
2020-07-02  3:26 ` [dpdk-dev] [PATCH v2] net/i40e: fix modify the number of qps in VF alvinx.zhang
2020-07-15  7:28   ` alvinx.zhang [this message]
2020-07-15 10:17     ` [dpdk-dev] [PATCH v3] " Jeff Guo
2020-07-16  1:38       ` Zhang, AlvinX
2020-07-16  1:52     ` [dpdk-dev] [PATCH v4] " alvinx.zhang
2020-07-16  4:24       ` [dpdk-dev] [PATCH v5] " alvinx.zhang
2020-07-16  4:57         ` Yang, Qiming
2020-07-16  5:13           ` Zhang, AlvinX
2020-07-16  5:12         ` alvinx.zhang
2020-07-16  6:33           ` [dpdk-dev] [PATCH v5] net/i40e: fix qps configuration " alvinx.zhang
2020-07-16  7:30             ` Jeff Guo
2020-07-16  9:14               ` Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200715072811.12592-1-alvinx.zhang@intel.com \
    --to=alvinx.zhang@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=dev@dpdk.org \
    --cc=jia.guo@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).