From: Somnath Kotur <somnath.kotur@broadcom.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com
Subject: [dpdk-dev] [PATCH] net/bnxt: update resource allocation settings
Date: Mon, 3 Aug 2020 12:15:59 +0530 [thread overview]
Message-ID: <20200803064559.1273-1-somnath.kotur@broadcom.com> (raw)
From: Shahaji Bhosle <sbhosle@broadcom.com>
Adjusted resource allocations for the hardware resources
like TCAM entries, action records, stat counters, exact match records to
scale up offload flows.
Also increased ipv4 nat entries to 1023.
This patch is a critical fix to enable driver load on current and all
FW versions going forward.
Fixes: cef3749d501e2 ("net/bnxt: update TruFlow resource allocation numbers")
Signed-off-by: Shahaji Bhosle <sbhosle@broadcom.com>
Signed-off-by: Kishore Padmanabha <kishore.padmanabha@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Michael Baucom <michael.baucom@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
---
drivers/net/bnxt/tf_ulp/bnxt_ulp.c | 42 +++++++++++++++++++-------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/net/bnxt/tf_ulp/bnxt_ulp.c b/drivers/net/bnxt/tf_ulp/bnxt_ulp.c
index c19cd1d..0d4a455 100644
--- a/drivers/net/bnxt/tf_ulp/bnxt_ulp.c
+++ b/drivers/net/bnxt/tf_ulp/bnxt_ulp.c
@@ -86,68 +86,68 @@ ulp_ctx_session_open(struct bnxt *bp,
resources = ¶ms.resources;
/** RX **/
/* Identifiers */
- resources->ident_cnt[TF_DIR_RX].cnt[TF_IDENT_TYPE_L2_CTXT_HIGH] = 200;
- resources->ident_cnt[TF_DIR_RX].cnt[TF_IDENT_TYPE_L2_CTXT_LOW] = 20;
+ resources->ident_cnt[TF_DIR_RX].cnt[TF_IDENT_TYPE_L2_CTXT_HIGH] = 422;
+ resources->ident_cnt[TF_DIR_RX].cnt[TF_IDENT_TYPE_L2_CTXT_LOW] = 6;
resources->ident_cnt[TF_DIR_RX].cnt[TF_IDENT_TYPE_WC_PROF] = 8;
resources->ident_cnt[TF_DIR_RX].cnt[TF_IDENT_TYPE_PROF_FUNC] = 8;
resources->ident_cnt[TF_DIR_RX].cnt[TF_IDENT_TYPE_EM_PROF] = 8;
/* Table Types */
- resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_FULL_ACT_RECORD] = 720;
- resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_ACT_STATS_64] = 720;
- resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_ACT_MODIFY_IPV4] = 8;
+ resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_FULL_ACT_RECORD] = 8192;
+ resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_ACT_STATS_64] = 8192;
+ resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_ACT_MODIFY_IPV4] = 1023;
/* ENCAP */
resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_ACT_ENCAP_8B] = 16;
- resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_ACT_ENCAP_16B] = 16;
+ resources->tbl_cnt[TF_DIR_RX].cnt[TF_TBL_TYPE_ACT_ENCAP_16B] = 63;
/* TCAMs */
resources->tcam_cnt[TF_DIR_RX].cnt[TF_TCAM_TBL_TYPE_L2_CTXT_TCAM_HIGH] =
- 200;
+ 422;
resources->tcam_cnt[TF_DIR_RX].cnt[TF_TCAM_TBL_TYPE_L2_CTXT_TCAM_LOW] =
- 20;
+ 6;
resources->tcam_cnt[TF_DIR_RX].cnt[TF_TCAM_TBL_TYPE_PROF_TCAM] = 8;
- resources->tcam_cnt[TF_DIR_RX].cnt[TF_TCAM_TBL_TYPE_WC_TCAM] = 416;
+ resources->tcam_cnt[TF_DIR_RX].cnt[TF_TCAM_TBL_TYPE_WC_TCAM] = 88;
/* EM */
- resources->em_cnt[TF_DIR_RX].cnt[TF_EM_TBL_TYPE_EM_RECORD] = 2048;
+ resources->em_cnt[TF_DIR_RX].cnt[TF_EM_TBL_TYPE_EM_RECORD] = 13176;
/* EEM */
resources->em_cnt[TF_DIR_RX].cnt[TF_EM_TBL_TYPE_TBL_SCOPE] = 1;
/** TX **/
/* Identifiers */
- resources->ident_cnt[TF_DIR_TX].cnt[TF_IDENT_TYPE_L2_CTXT_HIGH] = 200;
- resources->ident_cnt[TF_DIR_TX].cnt[TF_IDENT_TYPE_L2_CTXT_LOW] = 20;
+ resources->ident_cnt[TF_DIR_TX].cnt[TF_IDENT_TYPE_L2_CTXT_HIGH] = 292;
+ resources->ident_cnt[TF_DIR_TX].cnt[TF_IDENT_TYPE_L2_CTXT_LOW] = 144;
resources->ident_cnt[TF_DIR_TX].cnt[TF_IDENT_TYPE_WC_PROF] = 8;
resources->ident_cnt[TF_DIR_TX].cnt[TF_IDENT_TYPE_PROF_FUNC] = 8;
resources->ident_cnt[TF_DIR_TX].cnt[TF_IDENT_TYPE_EM_PROF] = 8;
/* Table Types */
- resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_FULL_ACT_RECORD] = 16;
- resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_STATS_64] = 16;
- resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_MODIFY_IPV4] = 8;
+ resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_FULL_ACT_RECORD] = 8192;
+ resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_STATS_64] = 8192;
+ resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_MODIFY_IPV4] = 1023;
/* ENCAP */
- resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_ENCAP_64B] = 16;
- resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_ENCAP_16B] = 16;
+ resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_ENCAP_64B] = 511;
+ resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_ENCAP_16B] = 200;
/* TCAMs */
resources->tcam_cnt[TF_DIR_TX].cnt[TF_TCAM_TBL_TYPE_L2_CTXT_TCAM_HIGH] =
- 200;
+ 292;
resources->tcam_cnt[TF_DIR_TX].cnt[TF_TCAM_TBL_TYPE_L2_CTXT_TCAM_LOW] =
- 20;
+ 144;
resources->tcam_cnt[TF_DIR_TX].cnt[TF_TCAM_TBL_TYPE_PROF_TCAM] = 8;
resources->tcam_cnt[TF_DIR_TX].cnt[TF_TCAM_TBL_TYPE_WC_TCAM] = 8;
/* EM */
- resources->em_cnt[TF_DIR_TX].cnt[TF_EM_TBL_TYPE_EM_RECORD] = 2048;
+ resources->em_cnt[TF_DIR_TX].cnt[TF_EM_TBL_TYPE_EM_RECORD] = 15232;
/* EEM */
resources->em_cnt[TF_DIR_TX].cnt[TF_EM_TBL_TYPE_TBL_SCOPE] = 1;
/* SP */
- resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_SP_SMAC_IPV4] = 128;
+ resources->tbl_cnt[TF_DIR_TX].cnt[TF_TBL_TYPE_ACT_SP_SMAC_IPV4] = 488;
rc = tf_open_session(&bp->tfp, ¶ms);
if (rc) {
--
2.7.4
next reply other threads:[~2020-08-03 6:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-03 6:45 Somnath Kotur [this message]
2020-08-03 14:24 ` Ajit Khaparde
2020-08-05 19:23 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200803064559.1273-1-somnath.kotur@broadcom.com \
--to=somnath.kotur@broadcom.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).