From: Vikas Gupta <vikas.gupta@broadcom.com>
To: dev@dpdk.org, akhil.goyal@nxp.com
Cc: ajit.khaparde@broadcom.com, vikram.prakash@broadcom.com,
Vikas Gupta <vikas.gupta@broadcom.com>,
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Subject: [dpdk-dev] [PATCH v1 1/8] crypto/bcmfs: add BCMFS driver
Date: Wed, 12 Aug 2020 12:01:20 +0530 [thread overview]
Message-ID: <20200812063127.8687-2-vikas.gupta@broadcom.com> (raw)
In-Reply-To: <20200812063127.8687-1-vikas.gupta@broadcom.com>
Add Broadcom FlexSparc(FS) device creation driver which registers to a
vdev and create a device. Add APIs for logs, supportive documention and
maintainers file.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
MAINTAINERS | 7 +
config/common_base | 5 +
doc/guides/cryptodevs/bcmfs.rst | 26 ++
doc/guides/cryptodevs/index.rst | 1 +
drivers/crypto/bcmfs/Makefile | 27 ++
drivers/crypto/bcmfs/bcmfs_device.c | 256 ++++++++++++++++++
drivers/crypto/bcmfs/bcmfs_device.h | 40 +++
drivers/crypto/bcmfs/bcmfs_logs.c | 38 +++
drivers/crypto/bcmfs/bcmfs_logs.h | 34 +++
drivers/crypto/bcmfs/meson.build | 10 +
.../crypto/bcmfs/rte_pmd_bcmfs_version.map | 3 +
drivers/crypto/meson.build | 3 +-
mk/rte.app.mk | 1 +
13 files changed, 450 insertions(+), 1 deletion(-)
create mode 100644 doc/guides/cryptodevs/bcmfs.rst
create mode 100644 drivers/crypto/bcmfs/Makefile
create mode 100644 drivers/crypto/bcmfs/bcmfs_device.c
create mode 100644 drivers/crypto/bcmfs/bcmfs_device.h
create mode 100644 drivers/crypto/bcmfs/bcmfs_logs.c
create mode 100644 drivers/crypto/bcmfs/bcmfs_logs.h
create mode 100644 drivers/crypto/bcmfs/meson.build
create mode 100644 drivers/crypto/bcmfs/rte_pmd_bcmfs_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 3cd402b34..7c2d7ff1b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1099,6 +1099,13 @@ F: drivers/crypto/zuc/
F: doc/guides/cryptodevs/zuc.rst
F: doc/guides/cryptodevs/features/zuc.ini
+Broadcom FlexSparc
+M: Vikas Gupta <vikas.gupta@@broadcom.com>
+M: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
+M: Ajit Khaparde <ajit.khaparde@broadcom.com>
+F: drivers/crypto/bcmfs/
+F: doc/guides/cryptodevs/bcmfs.rst
+F: doc/guides/cryptodevs/features/bcmfs.ini
Compression Drivers
-------------------
diff --git a/config/common_base b/config/common_base
index f7a8824f5..21daadcdd 100644
--- a/config/common_base
+++ b/config/common_base
@@ -705,6 +705,11 @@ CONFIG_RTE_LIBRTE_PMD_MVSAM_CRYPTO=n
#
CONFIG_RTE_LIBRTE_PMD_NITROX=y
+#
+# Compile PMD for Broadcom crypto device
+#
+CONFIG_RTE_LIBRTE_PMD_BCMFS=y
+
#
# Compile generic security library
#
diff --git a/doc/guides/cryptodevs/bcmfs.rst b/doc/guides/cryptodevs/bcmfs.rst
new file mode 100644
index 000000000..752ce028a
--- /dev/null
+++ b/doc/guides/cryptodevs/bcmfs.rst
@@ -0,0 +1,26 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(C) 2020 Broadcom
+
+Broadcom FlexSparc Crypto Poll Mode Driver
+==========================================
+
+The FlexSparc crypto poll mode driver provides support for offloading
+cryptographic operations to the Broadcom SoCs having FlexSparc4/FlexSparc5 unit.
+Detailed information about SoCs can be found in
+
+* https://www.broadcom.com/
+
+Installation
+------------
+
+For compiling the Broadcom FlexSparc crypto PMD, please check if the
+CONFIG_RTE_LIBRTE_PMD_BCMFS setting is set to `y` in config/common_base file.
+
+* ``CONFIG_RTE_LIBRTE_PMD_BCMFS=y``
+
+Initialization
+--------------
+BCMFS crypto PMD depend upon the devices present in the path
+/sys/bus/platform/devices/fs<version>/<dev_name> on the platform.
+Each cryptodev PMD instance can be attached to the nodes present
+in the mentioned path.
diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst
index a67ed5a28..5d7e028bd 100644
--- a/doc/guides/cryptodevs/index.rst
+++ b/doc/guides/cryptodevs/index.rst
@@ -29,3 +29,4 @@ Crypto Device Drivers
qat
virtio
zuc
+ bcmfs
diff --git a/drivers/crypto/bcmfs/Makefile b/drivers/crypto/bcmfs/Makefile
new file mode 100644
index 000000000..781ee6efa
--- /dev/null
+++ b/drivers/crypto/bcmfs/Makefile
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(C) 2020 Broadcom
+# All rights reserved.
+#
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+#
+# library name
+#
+LIB = librte_pmd_bcmfs.a
+
+CFLAGS += $(WERROR_FLAGS)
+CFLAGS += -I$(RTE_SDK)/drivers/crypto/bcmfs
+CFLAGS += -DALLOW_EXPERIMENTAL_API
+
+#
+# all source are stored in SRCS-y
+#
+SRCS-y += bcmfs_logs.c
+SRCS-y += bcmfs_device.c
+
+LDLIBS += -lrte_eal -lrte_bus_vdev
+
+EXPORT_MAP := rte_pmd_bcmfs_version.map
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/drivers/crypto/bcmfs/bcmfs_device.c b/drivers/crypto/bcmfs/bcmfs_device.c
new file mode 100644
index 000000000..47c776de6
--- /dev/null
+++ b/drivers/crypto/bcmfs/bcmfs_device.c
@@ -0,0 +1,256 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2020 Broadcom.
+ * All rights reserved.
+ */
+
+#include <dirent.h>
+#include <stdbool.h>
+#include <sys/queue.h>
+
+#include <rte_string_fns.h>
+
+#include "bcmfs_device.h"
+#include "bcmfs_logs.h"
+
+struct bcmfs_device_attr {
+ const char name[BCMFS_MAX_PATH_LEN];
+ const char suffix[BCMFS_DEV_NAME_LEN];
+ const enum bcmfs_device_type type;
+ const uint32_t offset;
+ const uint32_t version;
+};
+
+/* BCMFS supported devices */
+static struct bcmfs_device_attr dev_table[] = {
+ {
+ .name = "fs4",
+ .suffix = "crypto_mbox",
+ .type = BCMFS_SYM_FS4,
+ .offset = 0,
+ .version = 0x76303031
+ },
+ {
+ .name = "fs5",
+ .suffix = "mbox",
+ .type = BCMFS_SYM_FS5,
+ .offset = 0,
+ .version = 0x76303032
+ },
+ {
+ /* sentinel */
+ }
+};
+
+TAILQ_HEAD(fsdev_list, bcmfs_device);
+static struct fsdev_list fsdev_list = TAILQ_HEAD_INITIALIZER(fsdev_list);
+
+static struct bcmfs_device *
+fsdev_allocate_one_dev(struct rte_vdev_device *vdev,
+ char *dirpath,
+ char *devname,
+ enum bcmfs_device_type dev_type __rte_unused)
+{
+ struct bcmfs_device *fsdev;
+
+ fsdev = calloc(1, sizeof(*fsdev));
+ if (!fsdev)
+ return NULL;
+
+ if (strlen(dirpath) > sizeof(fsdev->dirname)) {
+ BCMFS_LOG(ERR, "dir path name is too long");
+ goto cleanup;
+ }
+
+ if (strlen(devname) > sizeof(fsdev->name)) {
+ BCMFS_LOG(ERR, "devname is too long");
+ goto cleanup;
+ }
+
+ strcpy(fsdev->dirname, dirpath);
+ strcpy(fsdev->name, devname);
+
+ fsdev->vdev = vdev;
+
+ TAILQ_INSERT_TAIL(&fsdev_list, fsdev, next);
+
+ return fsdev;
+
+cleanup:
+ free(fsdev);
+
+ return NULL;
+}
+
+static struct bcmfs_device *
+find_fsdev(struct rte_vdev_device *vdev)
+{
+ struct bcmfs_device *fsdev;
+
+ TAILQ_FOREACH(fsdev, &fsdev_list, next)
+ if (fsdev->vdev == vdev)
+ return fsdev;
+
+ return NULL;
+}
+
+static void
+fsdev_release(struct bcmfs_device *fsdev)
+{
+ if (fsdev == NULL)
+ return;
+
+ TAILQ_REMOVE(&fsdev_list, fsdev, next);
+ free(fsdev);
+}
+
+static int
+cmprator(const void *a, const void *b)
+{
+ return (*(const unsigned int *)a - *(const unsigned int *)b);
+}
+
+static int
+fsdev_find_all_devs(const char *path, const char *search,
+ uint32_t *devs)
+{
+ DIR *dir;
+ struct dirent *entry;
+ int count = 0;
+ char addr[BCMFS_MAX_NODES][BCMFS_MAX_PATH_LEN];
+ int i;
+
+ dir = opendir(path);
+ if (dir == NULL) {
+ BCMFS_LOG(ERR, "Unable to open directory");
+ return 0;
+ }
+
+ while ((entry = readdir(dir)) != NULL) {
+ if (strstr(entry->d_name, search)) {
+ strlcpy(addr[count], entry->d_name,
+ BCMFS_MAX_PATH_LEN);
+ count++;
+ }
+ }
+
+ closedir(dir);
+
+ for (i = 0 ; i < count; i++)
+ devs[i] = (uint32_t)strtoul(addr[i], NULL, 16);
+ /* sort the devices based on IO addresses */
+ qsort(devs, count, sizeof(uint32_t), cmprator);
+
+ return count;
+}
+
+static bool
+fsdev_find_sub_dir(char *path, const char *search, char *output)
+{
+ DIR *dir;
+ struct dirent *entry;
+
+ dir = opendir(path);
+ if (dir == NULL) {
+ BCMFS_LOG(ERR, "Unable to open directory");
+ return -ENODEV;
+ }
+
+ while ((entry = readdir(dir)) != NULL) {
+ if (!strcmp(entry->d_name, search)) {
+ strlcpy(output, entry->d_name, BCMFS_MAX_PATH_LEN);
+ closedir(dir);
+ return true;
+ }
+ }
+
+ closedir(dir);
+
+ return false;
+}
+
+
+static int
+bcmfs_vdev_probe(struct rte_vdev_device *vdev)
+{
+ struct bcmfs_device *fsdev;
+ char top_dirpath[BCMFS_MAX_PATH_LEN];
+ char sub_dirpath[BCMFS_MAX_PATH_LEN];
+ char out_dirpath[BCMFS_MAX_PATH_LEN];
+ char out_dirname[BCMFS_MAX_PATH_LEN];
+ uint32_t fsdev_dev[BCMFS_MAX_NODES];
+ enum bcmfs_device_type dtype;
+ int i = 0;
+ int dev_idx;
+ int count = 0;
+ bool found = false;
+
+ sprintf(top_dirpath, "%s", SYSFS_BCM_PLTFORM_DEVICES);
+ while (strlen(dev_table[i].name)) {
+ found = fsdev_find_sub_dir(top_dirpath,
+ dev_table[i].name,
+ sub_dirpath);
+ if (found)
+ break;
+ i++;
+ }
+ if (!found) {
+ BCMFS_LOG(ERR, "No supported bcmfs dev found");
+ return -ENODEV;
+ }
+
+ dev_idx = i;
+ dtype = dev_table[i].type;
+
+ snprintf(out_dirpath, sizeof(out_dirpath), "%s/%s",
+ top_dirpath, sub_dirpath);
+ count = fsdev_find_all_devs(out_dirpath,
+ dev_table[dev_idx].suffix,
+ fsdev_dev);
+ if (!count) {
+ BCMFS_LOG(ERR, "No supported bcmfs dev found");
+ return -ENODEV;
+ }
+
+ i = 0;
+ while (count) {
+ /* format the device name present in the patch */
+ snprintf(out_dirname, sizeof(out_dirname), "%x.%s",
+ fsdev_dev[i], dev_table[dev_idx].suffix);
+ fsdev = fsdev_allocate_one_dev(vdev, out_dirpath,
+ out_dirname, dtype);
+ if (!fsdev) {
+ count--;
+ i++;
+ continue;
+ }
+ break;
+ }
+ if (fsdev == NULL) {
+ BCMFS_LOG(ERR, "All supported devs busy");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int
+bcmfs_vdev_remove(struct rte_vdev_device *vdev)
+{
+ struct bcmfs_device *fsdev;
+
+ fsdev = find_fsdev(vdev);
+ if (fsdev == NULL)
+ return -ENODEV;
+
+ fsdev_release(fsdev);
+ return 0;
+}
+
+/* Register with vdev */
+static struct rte_vdev_driver rte_bcmfs_pmd = {
+ .probe = bcmfs_vdev_probe,
+ .remove = bcmfs_vdev_remove
+};
+
+RTE_PMD_REGISTER_VDEV(bcmfs_pmd,
+ rte_bcmfs_pmd);
diff --git a/drivers/crypto/bcmfs/bcmfs_device.h b/drivers/crypto/bcmfs/bcmfs_device.h
new file mode 100644
index 000000000..4b0c6d3ca
--- /dev/null
+++ b/drivers/crypto/bcmfs/bcmfs_device.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(C) 2020 Broadcom.
+ * All rights reserved.
+ */
+
+#ifndef _BCMFS_DEV_H_
+#define _BCMFS_DEV_H_
+
+#include <sys/queue.h>
+
+#include <rte_bus_vdev.h>
+
+#include "bcmfs_logs.h"
+
+/* max number of dev nodes */
+#define BCMFS_MAX_NODES 4
+#define BCMFS_MAX_PATH_LEN 512
+#define BCMFS_DEV_NAME_LEN 64
+
+/* Path for BCM-Platform device directory */
+#define SYSFS_BCM_PLTFORM_DEVICES "/sys/bus/platform/devices"
+
+/* Supported devices */
+enum bcmfs_device_type {
+ BCMFS_SYM_FS4,
+ BCMFS_SYM_FS5,
+ BCMFS_UNKNOWN
+};
+
+struct bcmfs_device {
+ TAILQ_ENTRY(bcmfs_device) next;
+ /* Directoy path for vfio */
+ char dirname[BCMFS_MAX_PATH_LEN];
+ /* BCMFS device name */
+ char name[BCMFS_DEV_NAME_LEN];
+ /* Parent vdev */
+ struct rte_vdev_device *vdev;
+};
+
+#endif /* _BCMFS_DEV_H_ */
diff --git a/drivers/crypto/bcmfs/bcmfs_logs.c b/drivers/crypto/bcmfs/bcmfs_logs.c
new file mode 100644
index 000000000..86f4ff3b5
--- /dev/null
+++ b/drivers/crypto/bcmfs/bcmfs_logs.c
@@ -0,0 +1,38 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Broadcom
+ * All rights reserved.
+ */
+
+#include <rte_log.h>
+#include <rte_hexdump.h>
+
+#include "bcmfs_logs.h"
+
+int bcmfs_conf_logtype;
+int bcmfs_dp_logtype;
+
+int
+bcmfs_hexdump_log(uint32_t level, uint32_t logtype, const char *title,
+ const void *buf, unsigned int len)
+{
+ if (level > rte_log_get_global_level())
+ return 0;
+ if (level > (uint32_t)(rte_log_get_level(logtype)))
+ return 0;
+
+ rte_hexdump(rte_log_get_stream(), title, buf, len);
+ return 0;
+}
+
+RTE_INIT(bcmfs_device_init_log)
+{
+ /* Configuration and general logs */
+ bcmfs_conf_logtype = rte_log_register("pmd.bcmfs_config");
+ if (bcmfs_conf_logtype >= 0)
+ rte_log_set_level(bcmfs_conf_logtype, RTE_LOG_NOTICE);
+
+ /* data-path logs */
+ bcmfs_dp_logtype = rte_log_register("pmd.bcmfs_fp");
+ if (bcmfs_dp_logtype >= 0)
+ rte_log_set_level(bcmfs_dp_logtype, RTE_LOG_NOTICE);
+}
diff --git a/drivers/crypto/bcmfs/bcmfs_logs.h b/drivers/crypto/bcmfs/bcmfs_logs.h
new file mode 100644
index 000000000..c03a49b75
--- /dev/null
+++ b/drivers/crypto/bcmfs/bcmfs_logs.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Broadcom
+ * All rights reserved.
+ */
+
+#ifndef _BCMFS_LOGS_H_
+#define _BCMFS_LOGS_H_
+
+#include <rte_log.h>
+
+extern int bcmfs_conf_logtype;
+extern int bcmfs_dp_logtype;
+
+#define BCMFS_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, bcmfs_conf_logtype, \
+ "%s(): " fmt "\n", __func__, ## args)
+
+#define BCMFS_DP_LOG(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, bcmfs_dp_logtype, \
+ "%s(): " fmt "\n", __func__, ## args)
+
+#define BCMFS_DP_HEXDUMP_LOG(level, title, buf, len) \
+ bcmfs_hexdump_log(RTE_LOG_ ## level, bcmfs_dp_logtype, title, buf, len)
+
+/**
+ * bcmfs_hexdump_log Dump out memory in a special hex dump format.
+ *
+ * The message will be sent to the stream used by the rte_log infrastructure.
+ */
+int
+bcmfs_hexdump_log(uint32_t level, uint32_t logtype, const char *heading,
+ const void *buf, unsigned int len);
+
+#endif /* _BCMFS_LOGS_H_ */
diff --git a/drivers/crypto/bcmfs/meson.build b/drivers/crypto/bcmfs/meson.build
new file mode 100644
index 000000000..a4bdd8ee5
--- /dev/null
+++ b/drivers/crypto/bcmfs/meson.build
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(C) 2020 Broadcom
+# All rights reserved.
+#
+
+deps += ['eal', 'bus_vdev']
+sources = files(
+ 'bcmfs_logs.c',
+ 'bcmfs_device.c'
+ )
diff --git a/drivers/crypto/bcmfs/rte_pmd_bcmfs_version.map b/drivers/crypto/bcmfs/rte_pmd_bcmfs_version.map
new file mode 100644
index 000000000..299ae632d
--- /dev/null
+++ b/drivers/crypto/bcmfs/rte_pmd_bcmfs_version.map
@@ -0,0 +1,3 @@
+DPDK_21.0 {
+ local: *;
+};
diff --git a/drivers/crypto/meson.build b/drivers/crypto/meson.build
index a2423507a..8e06d0533 100644
--- a/drivers/crypto/meson.build
+++ b/drivers/crypto/meson.build
@@ -23,7 +23,8 @@ drivers = ['aesni_gcm',
'scheduler',
'snow3g',
'virtio',
- 'zuc']
+ 'zuc',
+ 'bcmfs']
std_deps = ['cryptodev'] # cryptodev pulls in all other needed deps
config_flag_fmt = 'RTE_LIBRTE_@0@_PMD'
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 0ce8cf541..5e268f8c0 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -308,6 +308,7 @@ ifeq ($(CONFIG_RTE_LIBRTE_SECURITY),y)
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_CAAM_JR) += -lrte_pmd_caam_jr
endif # CONFIG_RTE_LIBRTE_SECURITY
_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_VIRTIO_CRYPTO) += -lrte_pmd_virtio_crypto
+_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_BCMFS) += -lrte_pmd_bcmfs
endif # CONFIG_RTE_LIBRTE_CRYPTODEV
ifeq ($(CONFIG_RTE_LIBRTE_COMPRESSDEV),y)
--
2.17.1
next prev parent reply other threads:[~2020-08-12 6:31 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-11 14:58 [dpdk-dev] [PATCH 0 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 3/8] crypto/bcmfs: add apis for queue pair management Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 4/8] crypto/bcmfs: add hw queue pair operations Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 7/8] crypto/bcmfs: add crypto h/w module Vikas Gupta
2020-08-11 14:58 ` [dpdk-dev] [PATCH 0 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-08-12 6:31 ` Vikas Gupta [this message]
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 3/8] crypto/bcmfs: add apis for queue pair management Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 4/8] crypto/bcmfs: add hw queue pair operations Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 7/8] crypto/bcmfs: add crypto h/w module Vikas Gupta
2020-08-12 6:31 ` [dpdk-dev] [PATCH v1 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-08-12 13:44 ` Dybkowski, AdamX
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-09-28 18:49 ` Akhil Goyal
2020-09-29 10:52 ` Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-09-28 19:00 ` Akhil Goyal
2020-09-29 11:01 ` Vikas Gupta
2020-09-29 12:39 ` Akhil Goyal
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 3/8] crypto/bcmfs: add apis for queue pair management Vikas Gupta
2020-09-28 19:29 ` Akhil Goyal
2020-09-29 11:04 ` Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 4/8] crypto/bcmfs: add hw queue pair operations Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-09-28 19:46 ` Akhil Goyal
2020-09-29 11:12 ` Vikas Gupta
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 7/8] crypto/bcmfs: add crypto h/w module Vikas Gupta
2020-09-28 20:00 ` Akhil Goyal
2020-08-13 17:23 ` [dpdk-dev] [PATCH v2 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-09-28 20:01 ` Akhil Goyal
2020-09-28 20:06 ` [dpdk-dev] [PATCH v2 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Akhil Goyal
2020-10-05 15:39 ` Akhil Goyal
2020-10-05 16:46 ` Ajit Khaparde
2020-10-05 17:01 ` Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 " Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 3/8] crypto/bcmfs: add apis for queue pair management Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 4/8] crypto/bcmfs: add hw queue pair operations Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 7/8] crypto/bcmfs: add crypto h/w module Vikas Gupta
2020-10-05 16:26 ` [dpdk-dev] [PATCH v3 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 3/8] crypto/bcmfs: add queue pair management API Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 4/8] crypto/bcmfs: add HW queue pair operations Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 7/8] crypto/bcmfs: add crypto HW module Vikas Gupta
2020-10-07 16:45 ` [dpdk-dev] [PATCH v4 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 1/8] crypto/bcmfs: add BCMFS driver Vikas Gupta
2020-10-15 0:50 ` Thomas Monjalon
2020-10-15 0:55 ` Thomas Monjalon
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 2/8] crypto/bcmfs: add vfio support Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 3/8] crypto/bcmfs: add queue pair management API Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 4/8] crypto/bcmfs: add HW queue pair operations Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 5/8] crypto/bcmfs: create a symmetric cryptodev Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 6/8] crypto/bcmfs: add session handling and capabilities Vikas Gupta
2020-10-07 17:18 ` [dpdk-dev] [PATCH v5 7/8] crypto/bcmfs: add crypto HW module Vikas Gupta
2020-10-07 17:19 ` [dpdk-dev] [PATCH v5 8/8] crypto/bcmfs: add crypto pmd into cryptodev test Vikas Gupta
2020-10-09 15:00 ` Akhil Goyal
2020-10-09 15:00 ` [dpdk-dev] [PATCH v5 0/8] Add Crypto PMD for Broadcom`s FlexSparc devices Akhil Goyal
2020-10-16 2:15 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200812063127.8687-2-vikas.gupta@broadcom.com \
--to=vikas.gupta@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=akhil.goyal@nxp.com \
--cc=dev@dpdk.org \
--cc=raveendra.padasalagi@broadcom.com \
--cc=vikram.prakash@broadcom.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).