DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Wei Hu (Xavier)" <huwei013@chinasoftinc.com>
To: <dev@dpdk.org>
Cc: <xavier.huwei@huawei.com>
Subject: [dpdk-dev] [PATCH] net/hns3: support getting Tx and Rx queue information
Date: Tue, 18 Aug 2020 10:51:32 +0800	[thread overview]
Message-ID: <20200818025132.27912-1-huwei013@chinasoftinc.com> (raw)

From: Huisong Li <lihuisong@huawei.com>

This patch adds support for querying Rx/Tx queue information.

Currently, if there are not available Rx buffer descriptors in recieving
direction based on hns3 network engine, incoming packets will always be
dropped by hardware. This patch reports the '.rx_drop_en' information to
DPDK framework in the '.dev_infos_get', '.rxq_info_get' and
'.rx_queue_setup' ops implementation function.

Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c    | 11 +++++++
 drivers/net/hns3/hns3_ethdev_vf.c | 11 +++++++
 drivers/net/hns3/hns3_rxtx.c      | 51 +++++++++++++++++++++++++++++++
 drivers/net/hns3/hns3_rxtx.h      |  5 ++-
 4 files changed, 77 insertions(+), 1 deletion(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index 81e773046..fab1914c3 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -2495,6 +2495,15 @@ hns3_dev_infos_get(struct rte_eth_dev *eth_dev, struct rte_eth_dev_info *info)
 		.nb_mtu_seg_max = HNS3_MAX_NON_TSO_BD_PER_PKT,
 	};
 
+	info->default_rxconf = (struct rte_eth_rxconf) {
+		/*
+		 * If there are no available Rx buffer descriptors, incoming
+		 * packets are always dropped by hardware based on hns3 network
+		 * engine.
+		 */
+		.rx_drop_en = 1,
+	};
+
 	info->vmdq_queue_num = 0;
 
 	info->reta_size = HNS3_RSS_IND_TBL_SIZE;
@@ -5413,6 +5422,8 @@ static const struct eth_dev_ops hns3_eth_dev_ops = {
 	.tx_queue_release       = hns3_dev_tx_queue_release,
 	.rx_queue_intr_enable   = hns3_dev_rx_queue_intr_enable,
 	.rx_queue_intr_disable  = hns3_dev_rx_queue_intr_disable,
+	.rxq_info_get           = hns3_rxq_info_get,
+	.txq_info_get           = hns3_txq_info_get,
 	.dev_configure          = hns3_dev_configure,
 	.flow_ctrl_get          = hns3_flow_ctrl_get,
 	.flow_ctrl_set          = hns3_flow_ctrl_set,
diff --git a/drivers/net/hns3/hns3_ethdev_vf.c b/drivers/net/hns3/hns3_ethdev_vf.c
index 1d2941f0e..60b576b02 100644
--- a/drivers/net/hns3/hns3_ethdev_vf.c
+++ b/drivers/net/hns3/hns3_ethdev_vf.c
@@ -947,6 +947,15 @@ hns3vf_dev_infos_get(struct rte_eth_dev *eth_dev, struct rte_eth_dev_info *info)
 		.nb_mtu_seg_max = HNS3_MAX_NON_TSO_BD_PER_PKT,
 	};
 
+	info->default_rxconf = (struct rte_eth_rxconf) {
+		/*
+		 * If there are no available Rx buffer descriptors, incoming
+		 * packets are always dropped by hardware based on hns3 network
+		 * engine.
+		 */
+		.rx_drop_en = 1,
+	};
+
 	info->vmdq_queue_num = 0;
 
 	info->reta_size = HNS3_RSS_IND_TBL_SIZE;
@@ -2473,6 +2482,8 @@ static const struct eth_dev_ops hns3vf_eth_dev_ops = {
 	.tx_queue_release   = hns3_dev_tx_queue_release,
 	.rx_queue_intr_enable   = hns3_dev_rx_queue_intr_enable,
 	.rx_queue_intr_disable  = hns3_dev_rx_queue_intr_disable,
+	.rxq_info_get       = hns3_rxq_info_get,
+	.txq_info_get       = hns3_txq_info_get,
 	.dev_configure      = hns3vf_dev_configure,
 	.mac_addr_add       = hns3vf_add_mac_addr,
 	.mac_addr_remove    = hns3vf_remove_mac_addr,
diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c
index c0f798159..67920370a 100644
--- a/drivers/net/hns3/hns3_rxtx.c
+++ b/drivers/net/hns3/hns3_rxtx.c
@@ -1251,6 +1251,12 @@ hns3_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t nb_desc,
 		return -EINVAL;
 	}
 
+	if (conf->rx_drop_en == 0)
+		hns3_warn(hw, "if there are no available Rx descriptors,"
+			  "incoming packets are always dropped. input parameter"
+			  " conf->rx_drop_en(%u) is uneffective.",
+			  conf->rx_drop_en);
+
 	if (dev->data->rx_queues[idx]) {
 		hns3_rx_queue_release(dev->data->rx_queues[idx]);
 		dev->data->rx_queues[idx] = NULL;
@@ -2814,3 +2820,48 @@ void hns3_set_rxtx_function(struct rte_eth_dev *eth_dev)
 		eth_dev->tx_pkt_prepare = hns3_dummy_rxtx_burst;
 	}
 }
+
+void
+hns3_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+		  struct rte_eth_rxq_info *qinfo)
+{
+	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct hns3_rx_queue *rxq = dev->data->rx_queues[queue_id];
+
+	if (rxq == NULL) {
+		hns3_err(hw, "queue pointer of rx queue_id (%u) is NULL.",
+			 queue_id);
+		return;
+	}
+
+	qinfo->mp = rxq->mb_pool;
+	qinfo->nb_desc = rxq->nb_rx_desc;
+	qinfo->scattered_rx = dev->data->scattered_rx;
+
+	/*
+	 * If there are no available Rx buffer descriptors, incoming packets
+	 * are always dropped by hardware based on hns3 network engine.
+	 */
+	qinfo->conf.rx_drop_en = 1;
+	qinfo->conf.offloads = dev->data->dev_conf.rxmode.offloads;
+	qinfo->conf.rx_free_thresh = rxq->rx_free_thresh;
+	qinfo->conf.rx_deferred_start = rxq->rx_deferred_start;
+}
+
+void
+hns3_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+		  struct rte_eth_txq_info *qinfo)
+{
+	struct hns3_hw *hw = HNS3_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct hns3_tx_queue *txq = dev->data->tx_queues[queue_id];
+
+	if (txq == NULL) {
+		hns3_err(hw, "queue pointer of tx queue_id (%u) is NULL.",
+			 queue_id);
+		return;
+	}
+
+	qinfo->nb_desc = txq->nb_tx_desc;
+	qinfo->conf.offloads = dev->data->dev_conf.txmode.offloads;
+	qinfo->conf.tx_deferred_start = txq->tx_deferred_start;
+}
diff --git a/drivers/net/hns3/hns3_rxtx.h b/drivers/net/hns3/hns3_rxtx.h
index 0d20a27c8..f1fb3b56a 100644
--- a/drivers/net/hns3/hns3_rxtx.h
+++ b/drivers/net/hns3/hns3_rxtx.h
@@ -402,5 +402,8 @@ int hns3_set_fake_rx_or_tx_queues(struct rte_eth_dev *dev, uint16_t nb_rx_q,
 int hns3_config_gro(struct hns3_hw *hw, bool en);
 int hns3_restore_gro_conf(struct hns3_hw *hw);
 void hns3_update_all_queues_pvid_state(struct hns3_hw *hw);
-
+void hns3_rxq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+		       struct rte_eth_rxq_info *qinfo);
+void hns3_txq_info_get(struct rte_eth_dev *dev, uint16_t queue_id,
+		       struct rte_eth_txq_info *qinfo);
 #endif /* _HNS3_RXTX_H_ */
-- 
2.27.0


             reply	other threads:[~2020-08-18  2:52 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-18  2:51 Wei Hu (Xavier) [this message]
2020-08-18  3:07 ` [dpdk-dev] [PATCH V2] " Wei Hu (Xavier)
2020-08-19 16:19   ` Ferruh Yigit
2020-08-20  9:07     ` Wei Hu (Xavier)
2020-08-20  9:03 ` [dpdk-dev] [PATCH v3 0/3] minor updates for getting queue info Wei Hu (Xavier)
2020-08-20  9:03   ` [dpdk-dev] [PATCH v3 1/3] net/hns3: report Rx drop packets enable configuration Wei Hu (Xavier)
2020-08-20  9:03   ` [dpdk-dev] [PATCH v3 2/3] net/hns3: support getting Tx and Rx queue information Wei Hu (Xavier)
2020-08-20  9:03   ` [dpdk-dev] [PATCH v3 3/3] ethdev: check if queue setupped when getting queue info Wei Hu (Xavier)
2020-08-24 11:01 ` [dpdk-dev] [PATCH v4 0/3] minor updates for " Wei Hu (Xavier)
2020-08-24 11:01   ` [dpdk-dev] [PATCH v4 1/3] net/hns3: report Rx drop packets enable configuration Wei Hu (Xavier)
2020-08-24 11:01   ` [dpdk-dev] [PATCH v4 2/3] net/hns3: support getting Tx and Rx queue information Wei Hu (Xavier)
2020-08-24 11:01   ` [dpdk-dev] [PATCH v4 3/3] ethdev: check if queue setupped when getting queue info Wei Hu (Xavier)
2020-08-25  8:43     ` Ferruh Yigit
2020-08-25  8:44   ` [dpdk-dev] [PATCH v4 0/3] minor updates for " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200818025132.27912-1-huwei013@chinasoftinc.com \
    --to=huwei013@chinasoftinc.com \
    --cc=dev@dpdk.org \
    --cc=xavier.huwei@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).