[dpdk-dev] [PATCH v5 1/2] ethdev: add level support for RSS offload types

[<kirankumark@marvell.com>]

From: Kiran Kumar K <kirankumark@marvell.com>

This patch reserves 2 bits as input selection to select Inner and
outer layers for RSS computation. It is combined with existing
ETH_RSS_* to choose Inner or outer layers for L2, L3 and L4.
This functionality already exists in rte_flow through level parameter in
RSS action configuration rte_flow_action_rss.

Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
---
V5 Changes:
* Added support to set rss level type from port config in testpmd

 app/test-pmd/cmdline.c         | 11 ++++++++++-
 app/test-pmd/parameters.c      |  6 ++++++
 lib/librte_ethdev/rte_ethdev.h | 27 +++++++++++++++++++++++++++
 3 files changed, 43 insertions(+), 1 deletion(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0a6ed85f3..4eafee8c8 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -2334,7 +2334,16 @@ cmd_config_rss_parsed(void *parsed_result,
 		rss_conf.rss_hf = ETH_RSS_GTPU;
 	else if (!strcmp(res->value, "none"))
 		rss_conf.rss_hf = 0;
-	else if (!strcmp(res->value, "default"))
+	else if (!strcmp(res->value, "level-inner")) {
+		rss_hf &= (~ETH_RSS_LEVEL_MASK);
+		rss_conf.rss_hf = (rss_hf | ETH_RSS_LEVEL_INNER);
+	} else if (!strcmp(res->value, "level-outer")) {
+		rss_hf &= (~ETH_RSS_LEVEL_MASK);
+		rss_conf.rss_hf = (rss_hf | ETH_RSS_LEVEL_OUTER);
+	} else if (!strcmp(res->value, "level-inner-outer")) {
+		rss_hf &= (~ETH_RSS_LEVEL_MASK);
+		rss_conf.rss_hf = (rss_hf | ETH_RSS_LEVEL_INNER_OUTER);
+	} else if (!strcmp(res->value, "default"))
 		use_default = 1;
 	else if (isdigit(res->value[0]) && atoi(res->value) > 0 &&
 						atoi(res->value) < 64)
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 7cb0e3d6e..5f669ff24 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -632,6 +632,8 @@ launch_args_parse(int argc, char** argv)
 		{ "forward-mode",               1, 0, 0 },
 		{ "rss-ip",			0, 0, 0 },
 		{ "rss-udp",			0, 0, 0 },
+		{ "rss-outer",			0, 0, 0 },
+		{ "rss-inner-outer",		0, 0, 0 },
 		{ "rxq",			1, 0, 0 },
 		{ "txq",			1, 0, 0 },
 		{ "rxd",			1, 0, 0 },
@@ -1051,6 +1053,10 @@ launch_args_parse(int argc, char** argv)
 				rss_hf = ETH_RSS_IP;
 			if (!strcmp(lgopts[opt_idx].name, "rss-udp"))
 				rss_hf = ETH_RSS_UDP;
+			if (!strcmp(lgopts[opt_idx].name, "rss-outer"))
+				rss_hf |= ETH_RSS_LEVEL_OUTER;
+			if (!strcmp(lgopts[opt_idx].name, "rss-inner-outer"))
+				rss_hf |= ETH_RSS_LEVEL_INNER_OUTER;
 			if (!strcmp(lgopts[opt_idx].name, "rxq")) {
 				n = atoi(optarg);
 				if (n >= 0 && check_nb_rxq((queueid_t)n) == 0)
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index d29930fd8..28184cc85 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -552,6 +552,33 @@ struct rte_eth_rss_conf {
 #define RTE_ETH_RSS_L3_PRE64	   (1ULL << 53)
 #define RTE_ETH_RSS_L3_PRE96	   (1ULL << 52)

+/*
+ * We use the following macros to combine with the above layers to choose
+ * inner and outer layers or both for RSS computation.
+ * Note: Default is 0: inner layers, 1: outer layers, 2: both
+ * bit 50 and 51 are reserved for this.
+ */
+
+/**
+ * Level 0, It basically stands for the innermost encapsulation level RSS
+ * can be performed on according to PMD and device capabilities.
+ */
+#define ETH_RSS_LEVEL_INNER        (0ULL << 50)
+/**
+ * Level 1, It basically stands for the outermost encapsulation level RSS
+ * can be performed on according to PMD and device capabilities.
+ */
+#define ETH_RSS_LEVEL_OUTER        (1ULL << 50)
+/**
+ * Level 2, It basically stands for the both inner and outermost
+ * encapsulation level RSS can be performed on according to PMD and
+ * device capabilities.
+ */
+#define ETH_RSS_LEVEL_INNER_OUTER  (2ULL << 50)
+#define ETH_RSS_LEVEL_MASK	   (3ULL << 50)
+
+#define ETH_RSS_LEVEL(rss_hf) ((rss_hf & ETH_RSS_LEVEL_MASK) >> 50)
+
 /**
  * For input set change of hash filter, if SRC_ONLY and DST_ONLY of
  * the same level are used simultaneously, it is the same case as
--
2.25.1