From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v1 07/42] net/txgbe: add HW init function
Date: Tue, 1 Sep 2020 19:50:38 +0800 [thread overview]
Message-ID: <20200901115113.1529675-7-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20200901115113.1529675-1-jiawenwu@trustnetic.com>
Add hardware init function in mac layer.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/base/txgbe_hw.c | 103 ++++++++++++++++++++++++++--
drivers/net/txgbe/base/txgbe_hw.h | 4 ++
drivers/net/txgbe/base/txgbe_type.h | 1 +
drivers/net/txgbe/txgbe_ethdev.c | 2 +-
4 files changed, 102 insertions(+), 8 deletions(-)
diff --git a/drivers/net/txgbe/base/txgbe_hw.c b/drivers/net/txgbe/base/txgbe_hw.c
index 358872d30..c644de864 100644
--- a/drivers/net/txgbe/base/txgbe_hw.c
+++ b/drivers/net/txgbe/base/txgbe_hw.c
@@ -7,6 +7,68 @@
#include "txgbe_eeprom.h"
#include "txgbe_hw.h"
+/**
+ * txgbe_start_hw - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 txgbe_start_hw(struct txgbe_hw *hw)
+{
+ RTE_SET_USED(hw);
+
+ return 0;
+}
+
+/**
+ * txgbe_start_hw_gen2 - Init sequence for common device family
+ * @hw: pointer to hw structure
+ *
+ * Performs the init sequence common to the second generation
+ * of 10 GbE devices.
+ **/
+s32 txgbe_start_hw_gen2(struct txgbe_hw *hw)
+{
+ RTE_SET_USED(hw);
+
+ return 0;
+}
+
+/**
+ * txgbe_init_hw - Generic hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting the hardware, filling the bus info
+ * structure and media type, clears all on chip counters, initializes receive
+ * address registers, multicast table, VLAN filter table, calls routine to set
+ * up link and flow control settings, and leaves transmit and receive units
+ * disabled and uninitialized
+ **/
+s32 txgbe_init_hw(struct txgbe_hw *hw)
+{
+ s32 status;
+
+ DEBUGFUNC("txgbe_init_hw");
+
+ /* Reset the hardware */
+ status = hw->mac.reset_hw(hw);
+ if (status == 0 || status == TXGBE_ERR_SFP_NOT_PRESENT) {
+ /* Start the HW */
+ status = hw->mac.start_hw(hw);
+ }
+
+ /* Initialize the LED link active for LED blink support */
+ hw->mac.init_led_link_act(hw);
+
+ if (status != 0)
+ DEBUGOUT("Failed to initialize HW, STATUS = %d\n", status);
+
+ return status;
+}
+
s32 txgbe_set_rar(struct txgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr)
{
@@ -98,13 +160,6 @@ s32 txgbe_set_mac_type(struct txgbe_hw *hw)
return err;
}
-s32 txgbe_init_hw(struct txgbe_hw *hw)
-{
- RTE_SET_USED(hw);
- return 0;
-}
-
-
/**
* txgbe_init_ops_pf - Inits func ptrs and MAC type
* @hw: pointer to hardware structure
@@ -114,6 +169,7 @@ s32 txgbe_init_hw(struct txgbe_hw *hw)
**/
s32 txgbe_init_ops_pf(struct txgbe_hw *hw)
{
+ struct txgbe_mac_info *mac = &hw->mac;
struct txgbe_rom_info *rom = &hw->rom;
/* EEPROM */
@@ -130,6 +186,39 @@ s32 txgbe_init_ops_pf(struct txgbe_hw *hw)
rom->update_checksum = txgbe_update_eeprom_checksum;
rom->calc_checksum = txgbe_calc_eeprom_checksum;
+ /* MAC */
+ mac->init_hw = txgbe_init_hw;
+ mac->start_hw = txgbe_start_hw_raptor;
+
return 0;
}
+/**
+ * txgbe_start_hw_raptor - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+s32 txgbe_start_hw_raptor(struct txgbe_hw *hw)
+{
+ s32 err = 0;
+
+ DEBUGFUNC("txgbe_start_hw_raptor");
+
+ err = txgbe_start_hw(hw);
+ if (err != 0)
+ goto out;
+
+ err = txgbe_start_hw_gen2(hw);
+ if (err != 0)
+ goto out;
+
+ /* We need to run link autotry after the driver loads */
+ hw->mac.autotry_restart = true;
+
+out:
+ return err;
+}
+
diff --git a/drivers/net/txgbe/base/txgbe_hw.h b/drivers/net/txgbe/base/txgbe_hw.h
index adcc5fc48..55b1b60de 100644
--- a/drivers/net/txgbe/base/txgbe_hw.h
+++ b/drivers/net/txgbe/base/txgbe_hw.h
@@ -8,6 +8,10 @@
#include "txgbe_type.h"
s32 txgbe_init_hw(struct txgbe_hw *hw);
+s32 txgbe_start_hw(struct txgbe_hw *hw);
+s32 txgbe_stop_hw(struct txgbe_hw *hw);
+s32 txgbe_start_hw_gen2(struct txgbe_hw *hw);
+s32 txgbe_start_hw_raptor(struct txgbe_hw *hw);
s32 txgbe_set_rar(struct txgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
u32 enable_addr);
diff --git a/drivers/net/txgbe/base/txgbe_type.h b/drivers/net/txgbe/base/txgbe_type.h
index 8b7cfd8ff..92068b6f7 100644
--- a/drivers/net/txgbe/base/txgbe_type.h
+++ b/drivers/net/txgbe/base/txgbe_type.h
@@ -318,6 +318,7 @@ struct txgbe_mac_info {
u8 san_addr[ETH_ADDR_LEN];
u32 num_rar_entries;
+ bool autotry_restart;
u32 max_link_up_time;
};
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index 1cae321f1..921a75f25 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -151,7 +151,7 @@ eth_txgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
return -EIO;
}
- err = txgbe_init_hw(hw);
+ err = hw->mac.init_hw(hw);
/* Reset the hw statistics */
txgbe_dev_stats_reset(eth_dev);
--
2.18.4
next prev parent reply other threads:[~2020-09-01 11:52 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-01 11:50 [dpdk-dev] [PATCH v1 01/42] net/txgbe: add build and doc infrastructure Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 02/42] net/txgbe: add ethdev probe and remove Jiawen Wu
2020-09-09 17:50 ` Ferruh Yigit
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 03/42] net/txgbe: add device init and uninit Jiawen Wu
2020-09-09 17:52 ` Ferruh Yigit
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 04/42] net/txgbe: add error types and dummy function Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 05/42] net/txgbe: add mac type and HW ops dummy Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 06/42] net/txgbe: add EEPROM functions Jiawen Wu
2020-09-01 11:50 ` Jiawen Wu [this message]
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 08/42] net/txgbe: add HW reset operation Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 09/42] net/txgbe: add PHY init Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 10/42] net/txgbe: add module identify Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 11/42] net/txgbe: add PHY reset Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 12/42] net/txgbe: add device start and stop Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 13/42] net/txgbe: add interrupt operation Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 14/42] net/txgbe: add link status change Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 15/42] net/txgbe: add multi-speed link setup Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 16/42] net/txgbe: add autoc read and write Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 17/42] net/txgbe: support device LED on and off Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 18/42] net/txgbe: add rx and tx init Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 19/42] net/txgbe: add RX and TX start Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 20/42] net/txgbe: add RX and TX stop Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 21/42] net/txgbe: add RX and TX queues setup Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 22/42] net/txgbe: add packet type Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 23/42] net/txgbe: fill simple transmit function Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 24/42] net/txgbe: fill transmit function with hardware offload Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 25/42] net/txgbe: fill receive functions Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 26/42] net/txgbe: fill TX prepare funtion Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 27/42] net/txgbe: add device stats get Jiawen Wu
2020-09-01 11:50 ` [dpdk-dev] [PATCH v1 28/42] net/txgbe: add device xstats get Jiawen Wu
2020-09-09 17:53 ` Ferruh Yigit
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 29/42] net/txgbe: add queue stats mapping and enable RX DMA unit Jiawen Wu
2020-09-09 17:54 ` Ferruh Yigit
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 30/42] net/txgbe: add device info get Jiawen Wu
2020-09-09 17:54 ` Ferruh Yigit
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 31/42] net/txgbe: add MAC address operations Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 32/42] net/txgbe: add FW version get operation Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 33/42] net/txgbe: add EEPROM info " Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 34/42] net/txgbe: add remaining RX and TX queue operations Jiawen Wu
2020-09-09 18:15 ` Ferruh Yigit
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 35/42] net/txgbe: add VLAN handle support Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 36/42] net/txgbe: add flow control support Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 37/42] net/txgbe: add FC auto negotiation support Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 38/42] net/txgbe: add DCB packet buffer allocation Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 39/42] net/txgbe: configure DCB HW resources Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 40/42] net/txgbe: add device promiscuous and allmulticast mode Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 41/42] net/txgbe: add MTU set operation Jiawen Wu
2020-09-01 11:51 ` [dpdk-dev] [PATCH v1 42/42] net/txgbe: add register dump support Jiawen Wu
2020-09-09 17:48 ` [dpdk-dev] [PATCH v1 01/42] net/txgbe: add build and doc infrastructure Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200901115113.1529675-7-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).