DPDK patches and discussions
 help / color / Atom feed
From: Ophir Munk <ophirmu@nvidia.com>
To: dev@dpdk.org, Wenzhuo Lu <wenzhuo.lu@intel.com>,
	Beilei Xing <beilei.xing@intel.com>,
	Bernard Iremonger <bernard.iremonger@intel.com>,
	Ferruh Yigit <ferruh.yigit@intel.com>
Cc: Ophir Munk <ophirmu@nvidia.com>, Ophir Munk <ophirmu@mellanox.com>
Subject: [dpdk-dev] [PATCH v4 2/3] app/testpmd: enable configuring GENEVE port
Date: Tue, 15 Sep 2020 13:17:16 +0000
Message-ID: <20200915131717.18252-3-ophirmu@nvidia.com> (raw)
In-Reply-To: <20200915131717.18252-1-ophirmu@nvidia.com>

From: Ophir Munk <ophirmu@mellanox.com>

IANA has assigned port 6081 as the fixed well-known destination port for
GENEVE. Nevertheless draft-ietf-nvo3-geneve-09 recommends that
implementations make this configurable.  This commit enables specifying
any positive UDP destination port number for GENEVE.

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
---
 app/test-pmd/parameters.c             | 14 ++++++++++++--
 doc/guides/testpmd_app_ug/run_app.rst |  5 +++++
 2 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 7845153..25e2935 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -70,8 +70,8 @@ usage(char* progname)
 	       "--rxpt= | --rxht= | --rxwt= | --rxfreet= | "
 	       "--txpt= | --txht= | --txwt= | --txfreet= | "
 	       "--txrst= | --tx-offloads= | | --rx-offloads= | "
-	       "--vxlan-gpe-port= | --record-core-cycles | "
-	       "--record-burst-stats]\n",
+	       "--vxlan-gpe-port= | --geneve-port= | "
+	       "--record-core-cycles | --record-burst-stats]\n",
 	       progname);
 #ifdef RTE_LIBRTE_CMDLINE
 	printf("  --interactive: run in interactive mode.\n");
@@ -200,6 +200,7 @@ usage(char* progname)
 	printf("  --rx-offloads=0xXXXXXXXX: hexadecimal bitmask of RX queue offloads\n");
 	printf("  --hot-plug: enable hot plug for device.\n");
 	printf("  --vxlan-gpe-port=N: UPD port of tunnel VXLAN-GPE\n");
+	printf("  --geneve-port=N: UPD port of tunnel GENEVE\n");
 	printf("  --mlockall: lock all memory\n");
 	printf("  --no-mlockall: do not lock all memory\n");
 	printf("  --mp-alloc <native|anon|xmem|xmemhuge>: mempool allocation method.\n"
@@ -667,6 +668,7 @@ launch_args_parse(int argc, char** argv)
 		{ "rx-offloads",		1, 0, 0 },
 		{ "hot-plug",			0, 0, 0 },
 		{ "vxlan-gpe-port",		1, 0, 0 },
+		{ "geneve-port",		1, 0, 0 },
 		{ "mlockall",			0, 0, 0 },
 		{ "no-mlockall",		0, 0, 0 },
 		{ "mp-alloc",			1, 0, 0 },
@@ -1303,6 +1305,14 @@ launch_args_parse(int argc, char** argv)
 					rte_exit(EXIT_FAILURE,
 						 "vxlan-gpe-port must be >= 0\n");
 			}
+			if (!strcmp(lgopts[opt_idx].name, "geneve-port")) {
+				n = atoi(optarg);
+				if (n >= 0)
+					geneve_udp_port = (uint16_t)n;
+				else
+					rte_exit(EXIT_FAILURE,
+						 "geneve-port must be >= 0\n");
+			}
 			if (!strcmp(lgopts[opt_idx].name, "print-event"))
 				if (parse_event_printing_config(optarg, 1)) {
 					rte_exit(EXIT_FAILURE,
diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst
index e2539f6..dbd22f1 100644
--- a/doc/guides/testpmd_app_ug/run_app.rst
+++ b/doc/guides/testpmd_app_ug/run_app.rst
@@ -426,6 +426,11 @@ The command line options are:
     Set the UDP port number of tunnel VXLAN-GPE to N.
     The default value is 4790.
 
+*   ``--geneve-port=N``
+
+    Set the UDP port number of tunnel GENEVE to N.
+    The default value is 6081.
+
 *   ``--mlockall``
 
     Enable locking all memory.
-- 
2.8.4


  parent reply index

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29  8:29 [dpdk-dev] [PATCH v1 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-27  7:02   ` [dpdk-dev] [PATCH v2 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-14 17:27       ` Ferruh Yigit
2020-09-15 12:53       ` [dpdk-dev] [PATCH v3 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-15 13:17           ` [dpdk-dev] [PATCH v4 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-15 13:56               ` Ophir Munk
2020-09-17 12:23               ` Olivier Matz
2020-09-18 14:21                 ` Ophir Munk
2020-09-18 14:17               ` [dpdk-dev] [PATCH v5 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-06 14:30                   ` Ferruh Yigit
2020-10-07 14:52                     ` Ophir Munk
2020-10-07 16:25                       ` Ferruh Yigit
2020-10-08  8:44                         ` Ophir Munk
2020-10-08 13:37                           ` Ferruh Yigit
2020-10-07 15:30                   ` [dpdk-dev] [PATCH v6 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-08 20:16                       ` [dpdk-dev] [PATCH v7 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 3/3] app/testpmd: tunnel parsing protocols cleanup Ophir Munk
2020-10-09 12:49                         ` [dpdk-dev] [PATCH v7 0/3] Add GENEVE protocol parsing to testpmd Ferruh Yigit
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 3/3] app/testpmd: tunnel parsing protocols cleanup Ophir Munk
2020-10-07 16:05                       ` Ferruh Yigit
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-10-06 14:30                   ` Ferruh Yigit
2020-10-07 10:56                     ` Ophir Munk
2020-10-06 14:58                 ` [dpdk-dev] [PATCH v5 0/3] Add GENEVE protocol parsing to testpmd Ferruh Yigit
2020-10-07 15:43                   ` Ophir Munk
2020-10-07 16:00                     ` Ferruh Yigit
2020-09-15 13:17             ` Ophir Munk [this message]
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-14 17:31       ` Ferruh Yigit
2020-09-15  8:46         ` Ophir Munk
2020-09-15 11:07           ` Ferruh Yigit
2020-09-15 12:59             ` Ophir Munk
2020-09-15 13:19               ` Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-31  6:40     ` [dpdk-dev] [PATCH v2 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200915131717.18252-3-ophirmu@nvidia.com \
    --to=ophirmu@nvidia.com \
    --cc=beilei.xing@intel.com \
    --cc=bernard.iremonger@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=ophirmu@mellanox.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

Archives are clonable:
	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox