* [dpdk-dev] [RFC 5/5] app/testpmd: add support for ixgbe FDIR configuration
@ 2020-09-29 7:53 Chenxu Di
0 siblings, 0 replies; only message in thread
From: Chenxu Di @ 2020-09-29 7:53 UTC (permalink / raw)
To: dev; +Cc: junyux.jiang, shougangx.wang, Wenzhuo Lu, Beilei Xing, Chenxu Di
As annouced in deprecation.rst, the "rte_eth_conf.fdir_conf" field
will be removed, but IXGBE generic flow still needs to depend on these
configurations. This patch adds setting FDIR configuration for IXGBE PMD
by calling private API.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
---
app/test-pmd/parameters.c | 63 ++++++++++++++++++++++++++++++++++++++-
app/test-pmd/testpmd.c | 28 +++++++++++++++++
app/test-pmd/testpmd.h | 3 ++
3 files changed, 93 insertions(+), 1 deletion(-)
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 8c2aa13dd..f9547a4d2 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -42,6 +42,9 @@
#ifdef RTE_LIBRTE_PMD_BOND
#include <rte_eth_bond.h>
#endif
+#ifdef RTE_LIBRTE_IXGBE_PMD
+#include <rte_pmd_ixgbe.h>
+#endif
#include <rte_flow.h>
#include "testpmd.h"
@@ -935,6 +938,29 @@ launch_args_parse(int argc, char** argv)
"none, signature, perfect, perfect-mac-vlan"
" or perfect-tunnel\n",
optarg);
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (!strcmp(optarg, "signature"))
+ ixgbe_fdir_conf.mode =
+ RTE_PMD_IXGBE_FDIR_MODE_SIGNATURE;
+ else if (!strcmp(optarg, "perfect"))
+ ixgbe_fdir_conf.mode =
+ RTE_PMD_IXGBE_FDIR_MODE_PERFECT;
+ else if (!strcmp(optarg, "perfect-mac-vlan"))
+ ixgbe_fdir_conf.mode =
+ RTE_PMD_IXGBE_FDIR_MODE_PERFECT_MAC_VLAN;
+ else if (!strcmp(optarg, "perfect-tunnel"))
+ ixgbe_fdir_conf.mode =
+ RTE_PMD_IXGBE_FDIR_MODE_PERFECT_TUNNEL;
+ else if (!strcmp(optarg, "none"))
+ ixgbe_fdir_conf.mode =
+ RTE_PMD_IXGBE_FDIR_MODE_NONE;
+ else
+ rte_exit(EXIT_FAILURE,
+ "pkt-mode-invalid %s invalid - must be: "
+ "none, signature, perfect, perfect-mac-vlan"
+ " or perfect-tunnel\n",
+ optarg);
+#endif
}
if (!strcmp(lgopts[opt_idx].name,
"pkt-filter-report-hash")) {
@@ -952,6 +978,22 @@ launch_args_parse(int argc, char** argv)
"pkt-filter-report-hash %s invalid "
"- must be: none or match or always\n",
optarg);
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (!strcmp(optarg, "none"))
+ ixgbe_fdir_conf.status =
+ RTE_PMD_IXGBE_FDIR_NO_REPORT_STATUS;
+ else if (!strcmp(optarg, "match"))
+ ixgbe_fdir_conf.status =
+ RTE_PMD_IXGBE_FDIR_REPORT_STATUS;
+ else if (!strcmp(optarg, "always"))
+ ixgbe_fdir_conf.status =
+ RTE_PMD_IXGBE_FDIR_REPORT_STATUS_ALWAYS;
+ else
+ rte_exit(EXIT_FAILURE,
+ "pkt-filter-report-hash %s invalid "
+ "- must be: none or match or always\n",
+ optarg);
+#endif
}
if (!strcmp(lgopts[opt_idx].name, "pkt-filter-size")) {
if (!strcmp(optarg, "64K"))
@@ -967,12 +1009,31 @@ launch_args_parse(int argc, char** argv)
rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
" must be: 64K or 128K or 256K\n",
optarg);
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ if (!strcmp(optarg, "64K"))
+ ixgbe_fdir_conf.pballoc =
+ RTE_PMD_IXGBE_FDIR_PBALLOC_64K;
+ else if (!strcmp(optarg, "128K"))
+ ixgbe_fdir_conf.pballoc =
+ RTE_PMD_IXGBE_FDIR_PBALLOC_128K;
+ else if (!strcmp(optarg, "256K"))
+ ixgbe_fdir_conf.pballoc =
+ RTE_PMD_IXGBE_FDIR_PBALLOC_256K;
+ else
+ rte_exit(EXIT_FAILURE, "pkt-filter-size %s invalid -"
+ " must be: 64K or 128K or 256K\n",
+ optarg);
+#endif
}
if (!strcmp(lgopts[opt_idx].name,
"pkt-filter-drop-queue")) {
n = atoi(optarg);
- if (n >= 0)
+ if (n >= 0) {
fdir_conf.drop_queue = (uint8_t) n;
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ ixgbe_fdir_conf.drop_queue = (uint8_t) n;
+#endif
+ }
else
rte_exit(EXIT_FAILURE,
"drop queue %d invalid - must"
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index ee3dd27d8..155063dbc 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -459,6 +459,31 @@ struct rte_fdir_conf fdir_conf = {
.drop_queue = 127,
};
+#ifdef RTE_LIBRTE_IXGBE_PMD
+struct rte_pmd_ixgbe_fdir_conf ixgbe_fdir_conf = {
+ .mode = RTE_PMD_IXGBE_FDIR_MODE_NONE,
+ .pballoc = RTE_PMD_IXGBE_FDIR_PBALLOC_64K,
+ .status = RTE_PMD_IXGBE_FDIR_REPORT_STATUS,
+ .mask = {
+ .vlan_tci_mask = 0xFFEF,
+ .ipv4_mask = {
+ .src_ip = 0xFFFFFFFF,
+ .dst_ip = 0xFFFFFFFF,
+ },
+ .ipv6_mask = {
+ .src_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
+ .dst_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
+ },
+ .src_port_mask = 0xFFFF,
+ .dst_port_mask = 0xFFFF,
+ .mac_addr_byte_mask = 0xFF,
+ .tunnel_type_mask = 1,
+ .tunnel_id_mask = 0xFFFFFFFF,
+ },
+ .drop_queue = 127,
+};
+#endif
+
volatile int test_done = 1; /* stop packet forwarding when set to 1. */
struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
@@ -3342,6 +3367,9 @@ init_port_config(void)
RTE_ETH_FOREACH_DEV(pid) {
port = &ports[pid];
port->dev_conf.fdir_conf = fdir_conf;
+#ifdef RTE_LIBRTE_IXGBE_PMD
+ rte_pmd_ixgbe_update_fdir_conf(pid, ixgbe_fdir_conf);
+#endif
ret = eth_dev_info_get_print_err(pid, &port->dev_info);
if (ret != 0)
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index f139fe7a0..8adb31b4f 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -409,6 +409,9 @@ extern uint8_t bitrate_enabled;
#endif
extern struct rte_fdir_conf fdir_conf;
+#ifdef RTE_LIBRTE_IXGBE_PMD
+extern struct rte_pmd_ixgbe_fdir_conf ixgbe_fdir_conf;
+#endif
/*
* Configuration of packet segments used by the "txonly" processing engine.
--
2.17.1
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-09-29 8:11 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-29 7:53 [dpdk-dev] [RFC 5/5] app/testpmd: add support for ixgbe FDIR configuration Chenxu Di
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).