* [dpdk-dev] [PATCH 2/3] net/bnxt: update HWRM structures
2020-09-29 20:59 [dpdk-dev] [PATCH 0/3] patchset for bnxt PMD Ajit Khaparde
2020-09-29 20:59 ` [dpdk-dev] [PATCH 1/3] net/bnxt: add support for RSS hash selection Ajit Khaparde
@ 2020-09-29 20:59 ` Ajit Khaparde
2020-09-30 22:17 ` Ferruh Yigit
2020-09-29 20:59 ` [dpdk-dev] [PATCH 3/3] doc: fix vector mode info for bnxt Ajit Khaparde
2020-09-30 17:16 ` [dpdk-dev] [PATCH 0/3] patchset for bnxt PMD Ajit Khaparde
3 siblings, 1 reply; 13+ messages in thread
From: Ajit Khaparde @ 2020-09-29 20:59 UTC (permalink / raw)
To: dev
HWRM API to a newer 1.10.1.70 version.
Few fields have been renamed because of this.
rx_err_pkt -> rx_discard_pkts
rx_drop_pkts -> rx_error_pkts
tx_err_pkts -> tx_discard_pkts
tx_drop_pkts -> tx_error_pkts
link_signal_mode -> active_fec_signal_mode
tx_bd_long_hi.mss -> tx_bd_long_hi.kid_or_ts_high_mss
tx_bd_long_hi.hdr_size -> tx_bd_long_hi.kid_or_ts_low_hdr_size
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
doc/guides/rel_notes/release_20_11.rst | 1 +
drivers/net/bnxt/bnxt_hwrm.c | 7 +-
drivers/net/bnxt/bnxt_txr.c | 27 +-
drivers/net/bnxt/hsi_struct_def_dpdk.h | 11011 +++++++++++++++--------
4 files changed, 7056 insertions(+), 3990 deletions(-)
diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst
index c460271be..7d6d5579c 100644
--- a/doc/guides/rel_notes/release_20_11.rst
+++ b/doc/guides/rel_notes/release_20_11.rst
@@ -84,6 +84,7 @@ New Features
* Added support for 200G PAM4 link speed.
* Added support for RSS hash level selection.
+ * Updated HWRM structures to 1.10.1.70 version.
Removed Items
diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c
index fc89cc29a..faeaf4b5d 100644
--- a/drivers/net/bnxt/bnxt_hwrm.c
+++ b/drivers/net/bnxt/bnxt_hwrm.c
@@ -1364,7 +1364,8 @@ static int bnxt_hwrm_port_phy_qcfg(struct bnxt *bp,
link_info->phy_ver[0] = resp->phy_maj;
link_info->phy_ver[1] = resp->phy_min;
link_info->phy_ver[2] = resp->phy_bld;
- link_info->link_signal_mode = rte_le_to_cpu_16(resp->link_signal_mode);
+ link_info->link_signal_mode =
+ rte_le_to_cpu_16(resp->active_fec_signal_mode);
link_info->force_pam4_link_speed =
rte_le_to_cpu_16(resp->force_pam4_link_speed);
link_info->support_pam4_speeds =
@@ -4011,8 +4012,8 @@ int bnxt_hwrm_ctx_qstats(struct bnxt *bp, uint32_t cid, int idx,
stats->q_ibytes[idx] = rte_le_to_cpu_64(resp->rx_ucast_bytes);
stats->q_ibytes[idx] += rte_le_to_cpu_64(resp->rx_mcast_bytes);
stats->q_ibytes[idx] += rte_le_to_cpu_64(resp->rx_bcast_bytes);
- stats->q_errors[idx] = rte_le_to_cpu_64(resp->rx_err_pkts);
- stats->q_errors[idx] += rte_le_to_cpu_64(resp->rx_drop_pkts);
+ stats->q_errors[idx] = rte_le_to_cpu_64(resp->rx_discard_pkts);
+ stats->q_errors[idx] += rte_le_to_cpu_64(resp->rx_error_pkts);
} else {
stats->q_opackets[idx] = rte_le_to_cpu_64(resp->tx_ucast_pkts);
stats->q_opackets[idx] += rte_le_to_cpu_64(resp->tx_mcast_pkts);
diff --git a/drivers/net/bnxt/bnxt_txr.c b/drivers/net/bnxt/bnxt_txr.c
index 20683315e..c55497960 100644
--- a/drivers/net/bnxt/bnxt_txr.c
+++ b/drivers/net/bnxt/bnxt_txr.c
@@ -216,6 +216,10 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt,
&txr->tx_desc_ring[txr->tx_prod];
txbd1->lflags = 0;
txbd1->cfa_meta = vlan_tag_flags;
+ /* Legacy tx_bd_long_hi->mss =
+ * tx_bd_long_hi->kid_or_ts_high_mss
+ */
+ txbd1->kid_or_ts_high_mss = 0;
if (txq->vfr_tx_cfa_action)
txbd1->cfa_action = txq->vfr_tx_cfa_action;
@@ -235,91 +239,76 @@ static uint16_t bnxt_start_xmit(struct rte_mbuf *tx_pkt,
tx_pkt->outer_l3_len : 0;
/* The hdr_size is multiple of 16bit units not 8bit.
* Hence divide by 2.
+ * Also legacy hdr_size = kid_or_ts_low_hdr_size.
*/
- txbd1->hdr_size = hdr_size >> 1;
- txbd1->mss = tx_pkt->tso_segsz;
- RTE_VERIFY(txbd1->mss);
+ txbd1->kid_or_ts_low_hdr_size = hdr_size >> 1;
+ txbd1->kid_or_ts_high_mss = tx_pkt->tso_segsz;
+ RTE_VERIFY(txbd1->kid_or_ts_high_mss);
} else if ((tx_pkt->ol_flags & PKT_TX_OIP_IIP_TCP_UDP_CKSUM) ==
PKT_TX_OIP_IIP_TCP_UDP_CKSUM) {
/* Outer IP, Inner IP, Inner TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_TIP_IP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_OIP_IIP_TCP_CKSUM) ==
PKT_TX_OIP_IIP_TCP_CKSUM) {
/* Outer IP, Inner IP, Inner TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_TIP_IP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_OIP_IIP_UDP_CKSUM) ==
PKT_TX_OIP_IIP_UDP_CKSUM) {
/* Outer IP, Inner IP, Inner TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_TIP_IP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_IIP_TCP_UDP_CKSUM) ==
PKT_TX_IIP_TCP_UDP_CKSUM) {
/* (Inner) IP, (Inner) TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_IP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_IIP_UDP_CKSUM) ==
PKT_TX_IIP_UDP_CKSUM) {
/* (Inner) IP, (Inner) TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_IP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_IIP_TCP_CKSUM) ==
PKT_TX_IIP_TCP_CKSUM) {
/* (Inner) IP, (Inner) TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_IP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_OIP_TCP_UDP_CKSUM) ==
PKT_TX_OIP_TCP_UDP_CKSUM) {
/* Outer IP, (Inner) TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_TIP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_OIP_UDP_CKSUM) ==
PKT_TX_OIP_UDP_CKSUM) {
/* Outer IP, (Inner) TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_TIP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_OIP_TCP_CKSUM) ==
PKT_TX_OIP_TCP_CKSUM) {
/* Outer IP, (Inner) TCP/UDP CSO */
txbd1->lflags |= TX_BD_FLG_TIP_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_OIP_IIP_CKSUM) ==
PKT_TX_OIP_IIP_CKSUM) {
/* Outer IP, Inner IP CSO */
txbd1->lflags |= TX_BD_FLG_TIP_IP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_TCP_UDP_CKSUM) ==
PKT_TX_TCP_UDP_CKSUM) {
/* TCP/UDP CSO */
txbd1->lflags |= TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_TCP_CKSUM) ==
PKT_TX_TCP_CKSUM) {
/* TCP/UDP CSO */
txbd1->lflags |= TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_UDP_CKSUM) ==
PKT_TX_UDP_CKSUM) {
/* TCP/UDP CSO */
txbd1->lflags |= TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_IP_CKSUM) ==
PKT_TX_IP_CKSUM) {
/* IP CSO */
txbd1->lflags |= TX_BD_LONG_LFLAGS_IP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_OUTER_IP_CKSUM) ==
PKT_TX_OUTER_IP_CKSUM) {
/* IP CSO */
txbd1->lflags |= TX_BD_LONG_LFLAGS_T_IP_CHKSUM;
- txbd1->mss = 0;
} else if ((tx_pkt->ol_flags & PKT_TX_IEEE1588_TMST) ==
PKT_TX_IEEE1588_TMST) {
/* PTP */
txbd1->lflags |= TX_BD_LONG_LFLAGS_STAMP;
- txbd1->mss = 0;
}
} else {
txbd->flags_type |= TX_BD_SHORT_TYPE_TX_BD_SHORT;
diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h
index 8dfc14b1e..72100919d 100644
--- a/drivers/net/bnxt/hsi_struct_def_dpdk.h
+++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h
@@ -392,7 +392,11 @@ struct cmd_nums {
#define HWRM_PORT_PHY_MDIO_BUS_ACQUIRE UINT32_C(0xb7)
#define HWRM_PORT_PHY_MDIO_BUS_RELEASE UINT32_C(0xb8)
#define HWRM_PORT_QSTATS_EXT_PFC_WD UINT32_C(0xb9)
- #define HWRM_PORT_ECN_QSTATS UINT32_C(0xba)
+ /* Reserved. */
+ #define HWRM_RESERVED7 UINT32_C(0xba)
+ #define HWRM_PORT_TX_FIR_CFG UINT32_C(0xbb)
+ #define HWRM_PORT_TX_FIR_QCFG UINT32_C(0xbc)
+ #define HWRM_PORT_ECN_QSTATS UINT32_C(0xbd)
#define HWRM_FW_RESET UINT32_C(0xc0)
#define HWRM_FW_QSTATUS UINT32_C(0xc1)
#define HWRM_FW_HEALTH_CHECK UINT32_C(0xc2)
@@ -619,7 +623,7 @@ struct cmd_nums {
#define HWRM_FUNC_HOST_PF_IDS_QUERY UINT32_C(0x197)
/* Queries extended stats per function */
#define HWRM_FUNC_QSTATS_EXT UINT32_C(0x198)
- /* Queries extended statistics context */
+ /* Queries extended statitics context */
#define HWRM_STAT_EXT_CTX_QUERY UINT32_C(0x199)
/* Experimental */
#define HWRM_SELFTEST_QLIST UINT32_C(0x200)
@@ -677,6 +681,12 @@ struct cmd_nums {
/* Experimental */
#define HWRM_TF_TBL_TYPE_SET UINT32_C(0x2db)
/* Experimental */
+ #define HWRM_TF_TBL_TYPE_BULK_GET UINT32_C(0x2dc)
+ /* Experimental */
+ #define HWRM_TF_CTXT_MEM_ALLOC UINT32_C(0x2e2)
+ /* Experimental */
+ #define HWRM_TF_CTXT_MEM_FREE UINT32_C(0x2e3)
+ /* Experimental */
#define HWRM_TF_CTXT_MEM_RGTR UINT32_C(0x2e4)
/* Experimental */
#define HWRM_TF_CTXT_MEM_UNRGTR UINT32_C(0x2e5)
@@ -860,6 +870,11 @@ struct ret_codes {
* may try again later.
*/
#define HWRM_ERR_CODE_BUSY UINT32_C(0x10)
+ /*
+ * This error code is reported by Firmware when an operation requested
+ * by the host is not allowed due to a secure lock violation.
+ */
+ #define HWRM_ERR_CODE_RESOURCE_LOCKED UINT32_C(0x11)
/*
* This value indicates that the HWRM response is in TLV format and
* should be interpreted as one or more TLVs starting with the
@@ -947,8 +962,8 @@ struct hwrm_err_output {
#define HWRM_VERSION_MINOR 10
#define HWRM_VERSION_UPDATE 1
/* non-zero means beta version */
-#define HWRM_VERSION_RSVD 56
-#define HWRM_VERSION_STR "1.10.1.56"
+#define HWRM_VERSION_RSVD 70
+#define HWRM_VERSION_STR "1.10.1.70"
/****************
* hwrm_ver_get *
@@ -1499,6 +1514,645 @@ struct hwrm_ver_get_output {
uint8_t valid;
} __rte_packed;
+/* cfa_bds_read_cmd_data_msg (size:128b/16B) */
+struct cfa_bds_read_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * This is read command. From 32 to 128B can be read from a table
+ * using this command.
+ */
+ #define CFA_BDS_READ_CMD_DATA_MSG_OPCODE_READ UINT32_C(0x0)
+ #define CFA_BDS_READ_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_READ_CMD_DATA_MSG_OPCODE_READ
+ /* This value selects the table type to be acted upon. */
+ uint8_t table_type;
+ /* This value selects the table type to be acted upon. */
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf)
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_SFT 0
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1)
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_BDS_READ_CMD_DATA_MSG_TABLE_TYPE_EM
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_READ_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_READ_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff)
+ #define CFA_BDS_READ_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ * this command is read from. The bottom two bits of this value must be
+ * zero. The size of the write is controlled by the data_size field.
+ */
+ uint64_t host_address;
+} __rte_packed;
+
+/* cfa_bds_write_cmd_data_msg (size:1152b/144B) */
+struct cfa_bds_write_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * This is write command. From 32 to 128B can be written to a table
+ * using this command.
+ */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_WRITE UINT32_C(0x1)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_WRITE_CMD_DATA_MSG_OPCODE_WRITE
+ /* This value selects the table type to be acted upon. */
+ uint8_t write_thru_table_type;
+ /* This value selects the table type to be acted upon. */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_SFT 0
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_TYPE_EM
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10)
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff)
+ #define CFA_BDS_WRITE_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ uint32_t unused0;
+ uint32_t unused1;
+ /*
+ * This is the data to be written. Data length is determined by the
+ * data_size field. The bd_cnt in the encapsulating BD must also be set
+ * correctly to ensure that the BD is processed correctly and the full
+ * WRITE_CMD message is extracted from the BD.
+ */
+ uint32_t dta[32];
+} __rte_packed;
+
+/* cfa_bds_read_clr_cmd_data_msg (size:192b/24B) */
+struct cfa_bds_read_clr_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * This is read-clear command. 32B can be read from a table and
+ * a 16b mask can be used to clear specific 16b units after the
+ * read as an atomic operation.
+ */
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_READ_CLR UINT32_C(0x2)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_READ_CLR_CMD_DATA_MSG_OPCODE_READ_CLR
+ /* This value selects the table type to be acted upon. */
+ uint8_t table_type;
+ /* This value selects the table type to be acted upon. */
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_SFT 0
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_ACTION UINT32_C(0x0)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_EM UINT32_C(0x1)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_TYPE_EM
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ uint8_t unused0;
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_INDEX_MASK \
+ UINT32_C(0x3ffffff)
+ #define CFA_BDS_READ_CLR_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ * this command is read from. The bottom two bits of this value must be
+ * zero. The size of the write is controlled by the data_size field.
+ */
+ uint64_t host_address;
+ /*
+ * This is active high clear mask for the 32B of data that this command
+ * can read. Bit 0 of the field will clear bits 15:0 of the first word
+ * of data read when set to '1'.
+ */
+ uint16_t clear_mask;
+ uint16_t unused1[3];
+} __rte_packed;
+
+/* cfa_bds_em_insert_cmd_data_msg (size:1152b/144B) */
+struct cfa_bds_em_insert_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * An exact match table insert will be attempted into the table.
+ * If there is a free location in the bucket, the payload will
+ * be written to the bucket.
+ */
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_EM_INSERT UINT32_C(0x3)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_EM_INSERT_CMD_DATA_MSG_OPCODE_EM_INSERT
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ uint8_t write_thru;
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_UNUSED_MASK UINT32_C(0xf)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_UNUSED_SFT 0
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10)
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_INDEX_MASK \
+ UINT32_C(0x3ffffff)
+ #define CFA_BDS_EM_INSERT_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ */
+ uint64_t host_address;
+ /*
+ * This is the Exact Match Lookup Record. Data length is determined by
+ * the data_size field. The bd_cnt in the encapsulating BD must also be
+ */
+ uint32_t dta[32];
+} __rte_packed;
+
+/* cfa_bds_em_delete_cmd_data_msg (size:192b/24B) */
+struct cfa_bds_em_delete_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /* An exact match table delete will be attempted. */
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_EM_DELETE UINT32_C(0x4)
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_EM_DELETE_CMD_DATA_MSG_OPCODE_EM_DELETE
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ uint8_t write_thru;
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_UNUSED_MASK UINT32_C(0xf)
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_UNUSED_SFT 0
+ /*
+ * Indicates write-through control. Indicates write-through when set,
+ * or write back when cleared.
+ */
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_WRITE_THRU UINT32_C(0x10)
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_EM_DELETE_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ uint32_t unused0;
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ */
+ uint64_t host_address;
+ /*
+ * This is the Exact Match Lookup Record. Data length is determined by
+ * the data_size field. The bd_cnt in the encapsulating BD must also be
+ */
+ uint64_t dta;
+} __rte_packed;
+
+/* cfa_bds_invalidate_cmd_data_msg (size:64b/8B) */
+struct cfa_bds_invalidate_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /*
+ * The specified table area will be invalidated. If it is needed.
+ * again, it will be read from the backing store.
+ */
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_INVALIDATE UINT32_C(0x5)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_INVALIDATE_CMD_DATA_MSG_OPCODE_INVALIDATE
+ /* This value selects the table type to be acted upon. */
+ uint8_t table_type;
+ /* This value selects the table type to be acted upon. */
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_SFT 0
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_ACTION \
+ UINT32_C(0x0)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_EM \
+ UINT32_C(0x1)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_TYPE_EM
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ uint8_t unused0;
+ /* This is the 32B index into the selected table to access. */
+ uint32_t table_index;
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_INDEX_MASK \
+ UINT32_C(0x3ffffff)
+ #define CFA_BDS_INVALIDATE_CMD_DATA_MSG_TABLE_INDEX_SFT 0
+} __rte_packed;
+
+/* cfa_bds_event_collect_cmd_data_msg (size:128b/16B) */
+struct cfa_bds_event_collect_cmd_data_msg {
+ /* This value selects the format for the mid-path command for the CFA. */
+ uint8_t opcode;
+ /* Reads notification messages from the Host Notification Queue. */
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_EVENT_COLLECT \
+ UINT32_C(0x6)
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_LAST \
+ CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_OPCODE_EVENT_COLLECT
+ uint8_t unused0;
+ /* This value selects which table scope will be accessed. */
+ uint8_t table_scope;
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_TABLE_SCOPE_MASK \
+ UINT32_C(0x1f)
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_TABLE_SCOPE_SFT 0
+ /*
+ * This value identifies the number of 32B units will be accessed. A
+ * value of zero is invalid. Maximum value is 4.
+ */
+ uint8_t data_size;
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_DATA_SIZE_MASK UINT32_C(0x7)
+ #define CFA_BDS_EVENT_COLLECT_CMD_DATA_MSG_DATA_SIZE_SFT 0
+ uint32_t unused1;
+ /*
+ * This is the 64b host address where you want the data returned to. The
+ * data will be written to the same function as the one that owns the SQ
+ */
+ uint64_t host_address;
+} __rte_packed;
+
+/* ce_bds_add_data_msg (size:512b/64B) */
+struct ce_bds_add_data_msg {
+ uint32_t version_algorithm_kid_opcode;
+ /*
+ * This value selects the operation for the mid-path command for the
+ * crypto blocks.
+ */
+ #define CE_BDS_ADD_DATA_MSG_OPCODE_MASK UINT32_C(0xf)
+ #define CE_BDS_ADD_DATA_MSG_OPCODE_SFT 0
+ /*
+ * This is the add command. Using this opcode, Host Driver can add
+ * information required for kTLS processing. The information is
+ * updated in the CFCK context.
+ */
+ #define CE_BDS_ADD_DATA_MSG_OPCODE_ADD UINT32_C(0x1)
+ #define CE_BDS_ADD_DATA_MSG_OPCODE_LAST \
+ CE_BDS_ADD_DATA_MSG_OPCODE_ADD
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_BDS_ADD_DATA_MSG_KID_MASK \
+ UINT32_C(0xfffff0)
+ #define CE_BDS_ADD_DATA_MSG_KID_SFT 4
+ /*
+ * Currently only two algorithms are supported, AES_GCM_128 and
+ * AES_GCM_256. Additional bits for future growth.
+ */
+ #define CE_BDS_ADD_DATA_MSG_ALGORITHM_MASK \
+ UINT32_C(0xf000000)
+ #define CE_BDS_ADD_DATA_MSG_ALGORITHM_SFT 24
+ /* AES_GCM_128 Algorithm */
+ #define CE_BDS_ADD_DATA_MSG_ALGORITHM_AES_GCM_128 \
+ UINT32_C(0x1000000)
+ /* AES_GCM_256 Algorithm */
+ #define CE_BDS_ADD_DATA_MSG_ALGORITHM_AES_GCM_256 \
+ UINT32_C(0x2000000)
+ /*
+ * Version number of TLS connection. HW will provide registers that
+ * converts the 4b encoded version number to 16b of actual version
+ * number in the TLS Header. * Initialized --> By mid-path command *
+ * Updated --> Never though another mid-path command will result in an
+ * update.
+ */
+ #define CE_BDS_ADD_DATA_MSG_VERSION_MASK \
+ UINT32_C(0xf0000000)
+ #define CE_BDS_ADD_DATA_MSG_VERSION_SFT 28
+ /* TLS1.2 Version */
+ #define CE_BDS_ADD_DATA_MSG__TLS1_2 \
+ (UINT32_C(0x0) << 28)
+ /* TLS1.3 Version */
+ #define CE_BDS_ADD_DATA_MSG__TLS1_3 \
+ (UINT32_C(0x1) << 28)
+ #define CE_BDS_ADD_DATA_MSG__LAST \
+ CE_BDS_ADD_DATA_MSG__TLS1_3
+ /*
+ * Command Type in the TLS header. HW will provide registers that
+ * converts the 3b encoded command type to 8b of actual command type in
+ * the TLS Header. * Initialized --> By mid-path command * Updated -->
+ * Never though another mid-path command will result in an update
+ */
+ uint8_t cmd_type;
+ #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_MASK UINT32_C(0x7)
+ #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_SFT 0
+ /* Application */
+ #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_APP UINT32_C(0x0)
+ #define CE_BDS_ADD_DATA_MSG_CMD_TYPE_LAST \
+ CE_BDS_ADD_DATA_MSG_CMD_TYPE_APP
+ uint8_t unused0[3];
+ /*
+ * Salt is part of the nonce that is used as the Initial Vector (IV) in
+ * AES-GCM cipher suites. These are exchanged as part of the handshake
+ * process and is either the client_write_iv (when the client is
+ * sending) or server_write_iv (when the server is sending). In
+ * TLS1.2, 4B of Salt is concatenated with 8B of explicit_nonce to
+ * generate the 12B of IV. In TLS1.3, 8B of TLS record sequence number
+ * is zero padded to 12B and then xor'ed with the 4B of salt to generate
+ * the 12B of IV. This value is initialized by this mid-path command.
+ */
+ uint32_t salt;
+ uint32_t unused1;
+ /*
+ * This field keeps track of the TCP sequence number that is expected as
+ * the first byte in the next TCP packet. This field is calculated by HW
+ * using the output of the parser. The field is initialized as part of
+ * the Mid-path BD download/update of a kTLS connection. For every TCP
+ * packet processed, TCE HW will update the value to Current packet TCP
+ * sequence number + Current packet TCP Payload Length.
+ */
+ uint32_t pkt_tcp_seq_num;
+ /*
+ * This field maintains the TCP sequence number of the first byte in the
+ * header of the active TLS record. This field is initialized as part of
+ * the Mid-path BD download/update of a kTLS connection. For every
+ * record that is processed, TCE HW copies the value from the
+ * next_tls_header_tcp_seq_num field.
+ */
+ uint32_t tls_header_tcp_seq_num;
+ /*
+ * This is sequence number for the TLS record in a particular session.
+ * In TLS1.2, record sequence number is part of the Associated Data (AD)
+ * in the AEAD algorithm. In TLS1.3, record sequence number is part of
+ * the Initial Vector (IV). The field is initialized as part of the
+ * mid-path BD download/update of a kTLS connection. TCE HW increments
+ * the field after that for every record processed as it parses the TCP
+ * packet.
+ */
+ uint32_t record_seq_num[2];
+ /*
+ * Key used for encrypting or decrypting TLS records. The Key is
+ * exchanged during the hand-shake protocol by the client-server and
+ * provided to HW through this mid-path BD.
+ */
+ uint32_t session_key[8];
+} __rte_packed;
+
+/* ce_bds_delete_data_msg (size:64b/8B) */
+struct ce_bds_delete_data_msg {
+ uint32_t kid_opcode;
+ /*
+ * This value selects the operation for the mid-path command for the
+ * crypto blocks.
+ */
+ #define CE_BDS_DELETE_DATA_MSG_OPCODE_MASK UINT32_C(0xf)
+ #define CE_BDS_DELETE_DATA_MSG_OPCODE_SFT 0
+ /*
+ * This is the delete command. Using this opcode, the host Driver
+ * can remove a key context from the CFCK. If context is deleted
+ * and packets with the same KID come through the pipeline, the
+ * following actions are taken. For transmit packets, no crypto
+ * operation will be performed, payload will be zero'ed out. For
+ * receive packets, no crypto operation will be performed,
+ * payload will be unmodified.
+ */
+ #define CE_BDS_DELETE_DATA_MSG_OPCODE_DELETE UINT32_C(0x2)
+ #define CE_BDS_DELETE_DATA_MSG_OPCODE_LAST \
+ CE_BDS_DELETE_DATA_MSG_OPCODE_DELETE
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_BDS_DELETE_DATA_MSG_KID_MASK UINT32_C(0xfffff0)
+ #define CE_BDS_DELETE_DATA_MSG_KID_SFT 4
+ uint32_t unused0;
+} __rte_packed;
+
+/* ce_bds_resync_resp_ack_msg (size:128b/16B) */
+struct ce_bds_resync_resp_ack_msg {
+ uint32_t resync_status_kid_opcode;
+ /*
+ * This value selects the operation for the mid-path command for the
+ * crypto blocks.
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_MASK UINT32_C(0xf)
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_SFT 0
+ /*
+ * This command is used by the driver as a response to the resync
+ * request sent by the crypto engine.
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_RESYNC UINT32_C(0x3)
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_LAST \
+ CE_BDS_RESYNC_RESP_ACK_MSG_OPCODE_RESYNC
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_KID_MASK UINT32_C(0xfffff0)
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_KID_SFT 4
+ /*
+ * This field indicates if the resync request resulted in a success or
+ * a failure.
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS \
+ UINT32_C(0x1000000)
+ /*
+ * An ACK indicates that the driver was able to find the TLS record
+ * associated with TCP sequence number provided by the HW
+ */
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_ACK \
+ (UINT32_C(0x0) << 24)
+ #define CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_LAST \
+ CE_BDS_RESYNC_RESP_ACK_MSG_RESYNC_STATUS_ACK
+ /*
+ * This field is the echo of the TCP sequence number provided in the
+ * resync request by the HW. If HW sent multiple resync requests, it
+ * only tracks the latest TCP sequence number. When the response from
+ * the Driver doesn't match the latest request, HW will drop the resync
+ * response.
+ */
+ uint32_t resync_record_tcp_seq_num;
+ /*
+ * This field indicates the TLS record sequence number associated with
+ * the resync request. HW will take this number and add the delta records
+ * it has found since sending the resync request, update the context and
+ * resume decrypting records.
+ */
+ uint32_t resync_record_seq_num[2];
+} __rte_packed;
+
+/* ce_bds_resync_resp_nack_msg (size:64b/8B) */
+struct ce_bds_resync_resp_nack_msg {
+ uint32_t resync_status_kid_opcode;
+ /*
+ * This value selects the operation for the mid-path command for the
+ * crypto blocks.
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_MASK UINT32_C(0xf)
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_SFT 0
+ /*
+ * This command is used by the driver as a response to the resync
+ * request sent by the crypto engine.
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_RESYNC UINT32_C(0x3)
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_LAST \
+ CE_BDS_RESYNC_RESP_NACK_MSG_OPCODE_RESYNC
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_KID_MASK \
+ UINT32_C(0xfffff0)
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_KID_SFT 4
+ /*
+ * This field indicates if the resync request resulted in a success or
+ * a failure.
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS \
+ UINT32_C(0x1000000)
+ /*
+ * An NAK indicates that the driver wasn't able to find the TLS
+ * record associated with TCP sequence number provided by the HW
+ */
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_NACK \
+ (UINT32_C(0x1) << 24)
+ #define CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_LAST \
+ CE_BDS_RESYNC_RESP_NACK_MSG_RESYNC_STATUS_NACK
+ /*
+ * This field is the echo of the TCP sequence number provided in the
+ * resync request by the HW. If HW sent multiple resync requests, it
+ * only tracks the latest TCP sequence number. When the response from
+ * the Driver doesn't match the latest request, HW will drop the resync
+ * response.
+ */
+ uint32_t resync_record_tcp_seq_num;
+} __rte_packed;
+
+/* crypto_presync_bd_cmd (size:256b/32B) */
+struct crypto_presync_bd_cmd {
+ uint8_t flags;
+ /*
+ * Typically, presync BDs are used for packet retransmissions. Source
+ * port sends all the packets in order over the network to destination
+ * port and packets get dropped in the network. The destination port
+ * will request retranmission of dropped packets and source port driver
+ * will send presync BD to setup the transmitter appropriately. It will
+ * provide the start and end TCP sequence number of the data to be
+ * transmitted. HW keeps two sets of context variable, one for in order
+ * traffic and one for retransmission traffic. HW is designed to
+ * transmit everything posted in the presync BD and return to in order
+ * mode after that. No inorder context variables are updated in the
+ * process. There is a special case where packets can be dropped
+ * between the TCP stack and Device Driver (Berkley Packet Filter for
+ * ex) and HW still needs to transmit rest of the traffic. In this
+ * mode, driver will send a presync BD as if it is a retransmission but
+ * at the end of the transmission, the in order variables need to be
+ * updated. This flag is used by driver to indicate that in order
+ * variables needs to be updated at the end of completing the task
+ * associated with the presync BD.
+ */
+ #define CRYPTO_PRESYNC_BD_CMD_FLAGS_UPDATE_IN_ORDER_VAR \
+ UINT32_C(0x1)
+ uint8_t unused0;
+ uint16_t unused1;
+ /*
+ * This field maintains the TCP sequence number of the first byte in the
+ * Header of the active TLS record. This field is set to 0 during
+ * mid-path BD updates, but is set to correct value when a presync BD is
+ * detected. For every record that is processed, the value from the
+ * next_tls_header_tcp_seq_num field is copied.
+ */
+ uint32_t header_tcp_seq_num;
+ /*
+ * When a retransmitted packet has a TLS authentication TAG present and
+ * the data spans multiple TCP Packets, HW is required to read the entire
+ * record to recalculate the TAG but only transmit what is required. This
+ * field is the start TCP sequence number of the packet(s) that need to
+ * be re-transmitted. This field is initialized to 0 during Mid-path BD
+ * add command and initialized to value provided by the driver when
+ * Pre-sync BD is detected. This field is never updated unless another
+ * Pre-sync BD signaling a new retransmission is scheduled.
+ */
+ uint32_t start_tcp_seq_num;
+ /*
+ * When a retransmitted packet has a TLS authentication TAG present and
+ * the data spans multiple TCP Packets, HW is required to read the
+ * entire record to recalculate the TAG but only transmit what is
+ * required. This field is the end TCP sequence number of the packet(s)
+ * that need to be re-transmitted. This field is initialized to 0 during
+ * Mid-path BD add command and initialized to value provided by the
+ * driver when Pre-sync BD is detected. This field is never updated
+ * unless another Pre-sync BD signaling a new retransmission is
+ * scheduled.
+ */
+ uint32_t end_tcp_seq_num;
+ /*
+ * For TLS1.2, an explicit nonce is used as part of the IV (concatenated
+ * with the SALT). For retans packets, this field is extracted from the
+ * TLS record, field right after the TLS Header and stored in the
+ * context. This field needs to be stored in context as TCP segmentation
+ * could have split the field into multiple TCP packets. This value is
+ * initialized to 0 when presync BD is detected by taking the value from
+ * the first TLS header. When subsequent TLS Headers are detected, the
+ * value is extracted from packet.
+ */
+ uint32_t explicit_nonce[2];
+ /*
+ * This is sequence number for the TLS record in a particular session. In
+ * TLS1.2, record sequence number is part of the Associated Data (AD) in
+ * the AEAD algorithm. In TLS1.3, record sequence number is part of the
+ * Initial Vector (IV). The field is initialized to 0 during Mid-path BD
+ * download. Is initialized to correct value when a pre-sync BD is
+ * detected. TCE HW increments the field after that for every record
+ * processed as it parses the TCP packet. Subsequent pre-sync BDs
+ * delivering more retransmission instruction will also update this
+ * field.
+ */
+ uint32_t record_seq_num[2];
+} __rte_packed;
+
/* bd_base (size:64b/8B) */
struct bd_base {
uint8_t type;
@@ -1530,6 +2184,16 @@ struct bd_base {
* RX Producer Assembly Buffer Descriptor.
*/
#define BD_BASE_TYPE_RX_PROD_AGG UINT32_C(0x6)
+ /*
+ * Indicates that this BD is used to issue a command to one of
+ * the mid-path destinations.
+ */
+ #define BD_BASE_TYPE_TX_BD_MP_CMD UINT32_C(0x8)
+ /*
+ * Indicates that this BD is used to issue a cryptographic pre-
+ * sync command through the fast path and destined for TCE.
+ */
+ #define BD_BASE_TYPE_TX_BD_PRESYNC_CMD UINT32_C(0x9)
/*
* Indicates that this BD is 32B long and is used for
* normal L2 packet transmission.
@@ -1642,7 +2306,12 @@ struct tx_bd_short {
* used for any data that the driver wants to associate with the
* transmit BD.
*
- * This field must be valid on the first BD of a packet.
+ * This field must be valid on the first BD of a packet. If completion
+ * coalescing is enabled on the TX ring, it is suggested that the driver
+ * populate the opaque field to indicate the specific TX ring with which
+ * the completion is associated, then utilize the opaque and sq_cons_idx
+ * fields in the coalesced completion record to determine the specific
+ * packets that are to be completed on that ring.
*/
uint32_t opaque;
/*
@@ -1745,11 +2414,16 @@ struct tx_bd_long {
*/
uint16_t len;
/*
- * The opaque data field is pass through to the completion and can be
+ * The opaque data field is passed through to the completion and can be
* used for any data that the driver wants to associate with the
* transmit BD.
*
- * This field must be valid on the first BD of a packet.
+ * This field must be valid on the first BD of a packet. If completion
+ * coalescing is enabled on the TX ring, it is suggested that the driver
+ * populate the opaque field to indicate the specific TX ring with which
+ * the completion is associated, then utilize the opaque and sq_cons_idx
+ * fields in the coalesced completion record to determine the specific
+ * packets that are to be completed on that ring.
*/
uint32_t opaque;
/*
@@ -1802,7 +2476,7 @@ struct tx_bd_long_hi {
#define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4)
/*
* If set to 1, the device will record the time at which the packet
- * was actually transmitted at the TX MAC.
+ * was actually transmitted at the TX MAC for 2-step time sync.
*
* This bit must be valid on the first BD of a packet.
*/
@@ -1829,9 +2503,9 @@ struct tx_bd_long_hi {
* Send Offload) processing for both normal or encapsulated
* packets, which is a form of TCP segmentation. When this bit
* is 1, the hdr_size and mss fields must be valid. The driver
- * doesn't need to set t_ip_chksum, ip_chksum, and tcp_udp_chksum
- * flags since the controller will replace the appropriate
- * checksum fields for segmented packets.
+ * doesn't need to set ot_ip_chksum, t_ip_chksum, ip_chksum, and
+ * tcp_udp_chksum flags since the controller will replace the
+ * appropriate checksum fields for segmented packets.
*
* When this bit is 1, the hdr_size and mss fields must be valid.
*/
@@ -1868,7 +2542,47 @@ struct tx_bd_long_hi {
* packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200)
- uint16_t hdr_size;
+ /*
+ * If set to '1', then the timestamp from the BD is used. If cleared
+ * to 0, then TWE provides the timestamp.
+ */
+ #define TX_BD_LONG_LFLAGS_BD_TS_EN UINT32_C(0x400)
+ /*
+ * If set to '1', this operation will cause a trace capture in each
+ * block it passes through.
+ */
+ #define TX_BD_LONG_LFLAGS_DEBUG_TRACE UINT32_C(0x800)
+ /*
+ * If set to '1', the device will record the time at which the packet
+ * was actually transmitted at the TX MAC for 1-step time sync. This
+ * bit must be valid on the first BD of a packet.
+ */
+ #define TX_BD_LONG_LFLAGS_STAMP_1STEP UINT32_C(0x1000)
+ /*
+ * If set to '1', the controller replaces the Outer-tunnel IP checksum
+ * field with hardware calculated IP checksum for the IP header of the
+ * packet associated with this descriptor. For outer UDP checksum, it
+ * will be the following behavior for all cases independent of settings
+ * of inner LSO and checksum offload BD flags. If outer UDP checksum
+ * is 0, then do not update it. If outer UDP checksum is non zero, then
+ * the hardware should compute and update it.
+ */
+ #define TX_BD_LONG_LFLAGS_OT_IP_CHKSUM UINT32_C(0x2000)
+ /*
+ * If set to zero when LSO is '1', then the IPID of the Outer-tunnel IP
+ * header will not be modified during LSO operations. If set to one
+ * when LSO is '1', then the IPID of the Outer-tunnel IP header will be
+ * incremented for each subsequent segment of an LSO operation. The
+ * flag is ignored if the LSO packet is a normal (non-tunneled) TCP
+ * packet.
+ */
+ #define TX_BD_LONG_LFLAGS_OT_IPID UINT32_C(0x4000)
+ /*
+ * If set to '1', When set to 1, KTLS encryption will be enabled for
+ * the packet.
+ */
+ #define TX_BD_LONG_LFLAGS_CRYPTO_EN UINT32_C(0x8000)
+ uint16_t kid_or_ts_low_hdr_size;
/*
* When LSO is '1', this field must contain the offset of the
* TCP payload from the beginning of the packet in as
@@ -1878,9 +2592,16 @@ struct tx_bd_long_hi {
*
* This value must be valid on the first BD of a packet.
*/
- #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff)
- #define TX_BD_LONG_HDR_SIZE_SFT 0
- uint32_t mss;
+ #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff)
+ #define TX_BD_LONG_HDR_SIZE_SFT 0
+ /*
+ * If lflags.bd_ts_en is 1, this is the lower 7 bits of the 24-bit
+ * timestamp. If lflags.crypto_en is 1, this is the lower 7 bits of the
+ * 20-bit KID.
+ */
+ #define TX_BD_LONG_KID_OR_TS_LOW_MASK UINT32_C(0xfe00)
+ #define TX_BD_LONG_KID_OR_TS_LOW_SFT 9
+ uint32_t kid_or_ts_high_mss;
/*
* This is the MSS value that will be used to do the LSO processing.
* The value is the length in bytes of the TCP payload for each
@@ -1888,9 +2609,22 @@ struct tx_bd_long_hi {
*
* This value must be valid on the first BD of a packet.
*/
- #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff)
- #define TX_BD_LONG_MSS_SFT 0
- uint16_t unused2;
+ #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff)
+ #define TX_BD_LONG_MSS_SFT 0
+ /*
+ * If lflags.bd_ts_en is 1, this is the upper 17 bits of the 24-bit
+ * timestamp. If lflags.crypto_en is 1, the least significant 13 bits
+ * of this field contain the upper 13 bits of the 20-bit KID.
+ */
+ #define TX_BD_LONG_KID_OR_TS_HIGH_MASK UINT32_C(0xffff8000)
+ #define TX_BD_LONG_KID_OR_TS_HIGH_SFT 15
+ /*
+ * This value selects bits 25:16 of the CFA action to perform on the
+ * packet. See the cfa_action field for more information.
+ */
+ uint16_t cfa_action_high;
+ #define TX_BD_LONG_CFA_ACTION_HIGH_MASK UINT32_C(0x3ff)
+ #define TX_BD_LONG_CFA_ACTION_HIGH_SFT 0
/*
* This value selects a CFA action to perform on the packet.
* Set this value to zero if no CFA action is desired.
@@ -2025,7 +2759,12 @@ struct tx_bd_long_inline {
/*
* The opaque data field is passed through to the completion and can be
* used for any data that the driver wants to associate with the transmit
- * BD.
+ * BD. This field must be valid on the first BD of a packet. If
+ * completion coalescing is enabled on the TX ring, it is suggested that
+ * the driver populate the opaque field to indicate the specific TX ring
+ * with which the completion is associated, then utilize the opaque and
+ * sq_cons_idx fields in the coalesced completion record to determine
+ * the specific packets that are to be completed on that ring.
*
* This field must be valid on the first BD of a packet.
*/
@@ -2063,7 +2802,8 @@ struct tx_bd_long_inline {
#define TX_BD_LONG_INLINE_LFLAGS_NOCRC UINT32_C(0x4)
/*
* If set to 1, the device will record the time at which the packet
- * was actually transmitted at the TX MAC.
+ * was actually transmitted at the TX MAC for 2-step time sync. This
+ * bit must be valid on the first BD of a packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_STAMP UINT32_C(0x8)
/*
@@ -2092,9 +2832,73 @@ struct tx_bd_long_inline {
* packet. Packet must be a valid FCoE format packet.
*/
#define TX_BD_LONG_INLINE_LFLAGS_FCOE_CRC UINT32_C(0x200)
- uint16_t unused2;
- uint32_t unused3;
- uint16_t unused4;
+ /*
+ * If set to '1', then the timestamp from the BD is used. If cleared
+ * to 0, then TWE provides the timestamp.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_BD_TS_EN UINT32_C(0x400)
+ /*
+ * If set to '1', this operation will cause a trace capture in each
+ * block it passes through.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_DEBUG_TRACE UINT32_C(0x800)
+ /*
+ * If set to '1', the device will record the time at which the packet
+ * was actually transmitted at the TX MAC for 1-step time sync. This
+ * bit must be valid on the first BD of a packet.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_STAMP_1STEP UINT32_C(0x1000)
+ /*
+ * If set to '1', the controller replaces the Outer-tunnel IP checksum
+ * field with hardware calculated IP checksum for the IP header of the
+ * packet associated with this descriptor. For outer UDP checksum, it
+ * will be the following behavior for all cases independent of settings
+ * of inner LSO and checksum offload BD flags. If outer UDP checksum
+ * is 0, then do not update it. If outer UDP checksum is non zero, then
+ * the hardware should compute and update it.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_OT_IP_CHKSUM UINT32_C(0x2000)
+ /*
+ * If set to zero when LSO is '1', then the IPID of the Outer-tunnel IP
+ * header will not be modified during LSO operations. If set to one
+ * when LSO is '1', then the IPID of the Outer-tunnel IP header will be
+ * incremented for each subsequent segment of an LSO operation. The
+ * flag is ignored if the LSO packet is a normal (non-tunneled) TCP
+ * packet.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_OT_IPID UINT32_C(0x4000)
+ /*
+ * If set to '1', When set to 1, KTLS encryption will be enabled for
+ * the packet.
+ */
+ #define TX_BD_LONG_INLINE_LFLAGS_CRYPTO_EN UINT32_C(0x8000)
+ uint8_t unused2;
+ uint8_t kid_or_ts_low;
+ #define TX_BD_LONG_INLINE_UNUSED UINT32_C(0x1)
+ /*
+ * If lflags.bd_ts_en is 1, this is the lower 7 bits of the 24-bit
+ * timestamp. If lflags.crypto_en is 1, this is the lower 7 bits of
+ * the 20-bit KID.
+ */
+ #define TX_BD_LONG_INLINE_KID_OR_TS_LOW_MASK UINT32_C(0xfe)
+ #define TX_BD_LONG_INLINE_KID_OR_TS_LOW_SFT 1
+ uint32_t kid_or_ts_high;
+ #define TX_BD_LONG_INLINE_UNUSED_MASK UINT32_C(0x7fff)
+ #define TX_BD_LONG_INLINE_UNUSED_SFT 0
+ /*
+ * If lflags.bd_ts_en is 1, this is the upper 17 bits of the 24-bit
+ * timestamp. If lflags.crypto_en is 1, the least significant 13 bits
+ * of this field contain the upper 13 bits of the 20-bit KID.
+ */
+ #define TX_BD_LONG_INLINE_KID_OR_TS_HIGH_MASK UINT32_C(0xffff8000)
+ #define TX_BD_LONG_INLINE_KID_OR_TS_HIGH_SFT 15
+ /*
+ * This value selects bits 25:16 of the CFA action to perform on the
+ * packet. See the cfa_action field for more information.
+ */
+ uint16_t cfa_action_high;
+ #define TX_BD_LONG_INLINE_CFA_ACTION_HIGH_MASK UINT32_C(0x3ff)
+ #define TX_BD_LONG_INLINE_CFA_ACTION_HIGH_SFT 0
/*
* This value selects a CFA action to perform on the packet.
* Set this value to zero if no CFA action is desired.
@@ -2182,6 +2986,97 @@ struct tx_bd_empty {
uint8_t unused_4[8];
} __rte_packed;
+/* tx_bd_mp_cmd (size:128b/16B) */
+struct tx_bd_mp_cmd {
+ /* Unless otherwise stated, sub-fields of this field are always valid. */
+ uint16_t flags_type;
+ /* This value identifies the type of buffer descriptor. */
+ #define TX_BD_MP_CMD_TYPE_MASK UINT32_C(0x3f)
+ #define TX_BD_MP_CMD_TYPE_SFT 0
+ /*
+ * Indicates that this BD is used to issue a command to one of
+ * the mid-path destinations.
+ */
+ #define TX_BD_MP_CMD_TYPE_TX_BD_MP_CMD UINT32_C(0x8)
+ #define TX_BD_MP_CMD_TYPE_LAST TX_BD_MP_CMD_TYPE_TX_BD_MP_CMD
+ #define TX_BD_MP_CMD_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_BD_MP_CMD_FLAGS_SFT 6
+ /* */
+ #define TX_BD_MP_CMD_FLAGS_UNUSED_MASK UINT32_C(0xc0)
+ #define TX_BD_MP_CMD_FLAGS_UNUSED_SFT 6
+ /*
+ * This value indicates the number of 16B BD locations (slots)
+ * consumed in the ring by this mid-path command BD, including the
+ * BD header and the command field.
+ */
+ #define TX_BD_MP_CMD_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
+ #define TX_BD_MP_CMD_FLAGS_BD_CNT_SFT 8
+ /*
+ * This value defines the length of command field in bytes. The maximum
+ * value shall be 496.
+ */
+ uint16_t len;
+ /*
+ * The opaque data field is pass through to the completion and can be
+ * used for any data that the driver wants to associate with this
+ * Tx mid-path command.
+ */
+ uint32_t opaque;
+ uint64_t unused1;
+} __rte_packed;
+
+/* tx_bd_presync_cmd (size:128b/16B) */
+struct tx_bd_presync_cmd {
+ /* Unless otherwise stated, sub-fields of this field are always valid. */
+ uint16_t flags_type;
+ /* This value identifies the type of buffer descriptor. */
+ #define TX_BD_PRESYNC_CMD_TYPE_MASK UINT32_C(0x3f)
+ #define TX_BD_PRESYNC_CMD_TYPE_SFT 0
+ /*
+ * Indicates that this BD is used to issue a cryptographic pre-
+ * sync command through the fast path and destined for TCE.
+ */
+ #define TX_BD_PRESYNC_CMD_TYPE_TX_BD_PRESYNC_CMD UINT32_C(0x9)
+ #define TX_BD_PRESYNC_CMD_TYPE_LAST \
+ TX_BD_PRESYNC_CMD_TYPE_TX_BD_PRESYNC_CMD
+ #define TX_BD_PRESYNC_CMD_FLAGS_MASK UINT32_C(0xffc0)
+ #define TX_BD_PRESYNC_CMD_FLAGS_SFT 6
+ /* */
+ #define TX_BD_PRESYNC_CMD_FLAGS_UNUSED_MASK UINT32_C(0xc0)
+ #define TX_BD_PRESYNC_CMD_FLAGS_UNUSED_SFT 6
+ /*
+ * This value indicates the number of 16B BD locations (slots)
+ * consumed in the ring by this pre-sync command BD, including the
+ * BD header and the command field.
+ */
+ #define TX_BD_PRESYNC_CMD_FLAGS_BD_CNT_MASK UINT32_C(0x1f00)
+ #define TX_BD_PRESYNC_CMD_FLAGS_BD_CNT_SFT 8
+ /*
+ * This value defines the length of command field in bytes. The maximum
+ * value shall be 496.
+ */
+ uint16_t len;
+ /*
+ * The opaque data field is pass through to TCE and can be used for
+ * debug.
+ */
+ uint32_t opaque;
+ /*
+ * This field is the Crypto Context ID to which the retransmit packet is
+ * applied. The KID references the context fields used by the
+ * associated kTLS offloaded connection.
+ */
+ uint32_t kid;
+ /*
+ * The KID value of all-ones is reserved for non-KTLS packets, which
+ * only implies that this value must not be used when filling this
+ * field for crypto packets.
+ */
+ #define TX_BD_PRESYNC_CMD_KID_VAL_MASK UINT32_C(0xfffff)
+ #define TX_BD_PRESYNC_CMD_KID_VAL_SFT 0
+ uint32_t unused_1;
+} __rte_packed;
+
/* rx_prod_pkt_bd (size:128b/16B) */
struct rx_prod_pkt_bd {
/* This value identifies the type of buffer descriptor. */
@@ -2310,6 +3205,297 @@ struct rx_prod_agg_bd {
uint64_t address;
} __rte_packed;
+/* cfa_cmpls_cmp_data_msg (size:128b/16B) */
+struct cfa_cmpls_cmp_data_msg {
+ uint32_t mp_client_dma_length_opcode_status_type;
+ /*
+ * This field represents the Mid-Path client that generated the
+ * completion.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_TYPE_MASK UINT32_C(0x3f)
+ #define CFA_CMPLS_CMP_DATA_MSG_TYPE_SFT 0
+ /* Mid Path Short Completion with length = 16B. */
+ #define CFA_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT \
+ UINT32_C(0x1e)
+ #define CFA_CMPLS_CMP_DATA_MSG_TYPE_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT
+ /* This value indicates the status for the command. */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_MASK UINT32_C(0x3c0)
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_SFT 6
+ /* Completed without error. */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_OK \
+ (UINT32_C(0x0) << 6)
+ /* Indicates an unsupported CFA opcode in the command. */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_UNSPRT_ERR \
+ (UINT32_C(0x1) << 6)
+ /*
+ * Indicates a CFA command formatting error. This error can occur on
+ * any of the supported CFA commands.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_FMT_ERR \
+ (UINT32_C(0x2) << 6)
+ /*
+ * Indicates an SVIF-Table scope error. This error can occur on any
+ * of the supported CFA commands.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_SCOPE_ERR \
+ (UINT32_C(0x3) << 6)
+ /*
+ * Indicates that the table_index is either outside of the
+ * table_scope range set by its EM_SIZE or, for EM Insert, it is in
+ * the static bucket range. This error can occur on EM Insert
+ * commands. It can also occur on Read, Read Clear, Write, and
+ * Invalidate commands if the table_type is EM.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_ADDR_ERR \
+ (UINT32_C(0x4) << 6)
+ /*
+ * Cache operation responded with an error. This error can occur on
+ * Read, Read Clear, Write, EM Insert, and EM Delete commands.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_CACHE_ERR \
+ (UINT32_C(0x5) << 6)
+ /*
+ * Indicates failure on EM Insert or EM Delete Command. Hash index
+ * and hash msb are returned in table_index and hash_msb fields.
+ * Dma_length is set to 1 if the bucket is also returned (as dma
+ * data).
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_EM_FAIL \
+ (UINT32_C(0x6) << 6)
+ /*
+ * Indicates no notifications were available on an Event Collection
+ * command.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_EVENT_COLLECT_FAIL \
+ (UINT32_C(0x7) << 6)
+ #define CFA_CMPLS_CMP_DATA_MSG_STATUS_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_STATUS_EVENT_COLLECT_FAIL
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED0_MASK UINT32_C(0xc00)
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED0_SFT 10
+ /* This is the opcode from the command. */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_MASK \
+ UINT32_C(0xff000)
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_SFT 12
+ /*
+ * This is read command. From 32 to 128B can be read from a table
+ * using this command.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_READ \
+ (UINT32_C(0x0) << 12)
+ /*
+ * This is write command. From 32 to 128B can be written to a table
+ * using this command.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_WRITE \
+ (UINT32_C(0x1) << 12)
+ /*
+ * This is read-clear command. 32B can be read from a table and a 16b
+ * mask can be used to clear specific 16b units after the read as an
+ * atomic operation.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_READ_CLR \
+ (UINT32_C(0x2) << 12)
+ /*
+ * An exact match table insert will be attempted into the table. If
+ * there is a free location in the bucket, the payload will be
+ * written to the bucket.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EM_INSERT \
+ (UINT32_C(0x3) << 12)
+ /* An exact match table delete will be attempted. */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EM_DELETE \
+ (UINT32_C(0x4) << 12)
+ /*
+ * The specified table area will be invalidated. If it is needed
+ * again, it will be read from the backing store.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_INVALIDATE \
+ (UINT32_C(0x5) << 12)
+ /* Reads notification messages from the Host Notification Queue. */
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_EVENT_COLLECT \
+ (UINT32_C(0x6) << 12)
+ #define CFA_CMPLS_CMP_DATA_MSG_OPCODE_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_OPCODE_EVENT_COLLECT
+ /*
+ * This field indicates the length of the DMA that accompanies the
+ * completion. Specified in units of DWords (32b). Valid values are
+ * between 0 and 128. A value of zero indicates that there is no DMA
+ * that accompanies the completion.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_DMA_LENGTH_MASK \
+ UINT32_C(0xff00000)
+ #define CFA_CMPLS_CMP_DATA_MSG_DMA_LENGTH_SFT 20
+ /*
+ * This field represents the Mid-Path client that generated the
+ * completion.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_MASK \
+ UINT32_C(0xf0000000)
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_SFT 28
+ /* TX configrable flow processing block. */
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_TE_CFA \
+ (UINT32_C(0x2) << 28)
+ /* RX configrable flow processing block. */
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_RE_CFA \
+ (UINT32_C(0x3) << 28)
+ #define CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_MP_CLIENT_RE_CFA
+ /*
+ * This is a copy of the opaque field from the mid path BD of this
+ * command.
+ */
+ uint32_t opaque;
+ uint16_t hash_msb_v;
+ /*
+ * This value is written by the NIC such that it will be different for
+ * each pass through the completion queue. The even passes will
+ * write 1. The odd passes will write 0.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_V UINT32_C(0x1)
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED1_MASK UINT32_C(0xe)
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED1_SFT 1
+ /*
+ * This is the upper 12b of the hash, returned on Exact Match
+ * Insertion/Deletion Commands.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_HASH_MSB_MASK UINT32_C(0xfff0)
+ #define CFA_CMPLS_CMP_DATA_MSG_HASH_MSB_SFT 4
+ /* This is the table type from the command. */
+ uint8_t table_type;
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED2_MASK UINT32_C(0xf)
+ #define CFA_CMPLS_CMP_DATA_MSG_UNUSED2_SFT 0
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_MASK UINT32_C(0xf0)
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_SFT 4
+ /* This command acts on the action table of the specified scope. */
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_ACTION (UINT32_C(0x0) << 4)
+ /* This command acts on the exact match table of the specified scope. */
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_EM (UINT32_C(0x1) << 4)
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_LAST \
+ CFA_CMPLS_CMP_DATA_MSG_TABLE_TYPE_EM
+ uint8_t table_scope;
+ /* This is the table scope from the command. */
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_SCOPE_MASK UINT32_C(0x1f)
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_SCOPE_SFT 0
+ uint32_t table_index;
+ /*
+ * This is the table index from the command (if it exists). However, if
+ * an Exact Match Insertion/Deletion command failed, then this is the
+ * table index of the calculated static hash bucket.
+ */
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_INDEX_MASK UINT32_C(0x3ffffff)
+ #define CFA_CMPLS_CMP_DATA_MSG_TABLE_INDEX_SFT 0
+} __rte_packed;
+
+/* CFA Mid-Path 32B DMA Message */
+/* cfa_dma32b_data_msg (size:256b/32B) */
+struct cfa_dma32b_data_msg {
+ /* DMA data value. */
+ uint32_t dta[8];
+} __rte_packed;
+
+/* CFA Mid-Path 64B DMA Message */
+/* cfa_dma64b_data_msg (size:512b/64B) */
+struct cfa_dma64b_data_msg {
+ /* DMA data value. */
+ uint32_t dta[16];
+} __rte_packed;
+
+/* CFA Mid-Path 96B DMA Message */
+/* cfa_dma96b_data_msg (size:768b/96B) */
+struct cfa_dma96b_data_msg {
+ /* DMA data value. */
+ uint32_t dta[24];
+} __rte_packed;
+
+/* CFA Mid-Path 128B DMA Message */
+/* cfa_dma128b_data_msg (size:1024b/128B) */
+struct cfa_dma128b_data_msg {
+ /* DMA data value. */
+ uint32_t dta[32];
+} __rte_packed;
+
+/* ce_cmpls_cmp_data_msg (size:128b/16B) */
+struct ce_cmpls_cmp_data_msg {
+ uint16_t status_subtype_type;
+ /*
+ * This field indicates the exact type of the completion. By
+ * convention, the LSB identifies the length of the record in 16B
+ * units. Even values indicate 16B records. Odd values indicate 32B
+ * records.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_TYPE_MASK UINT32_C(0x3f)
+ #define CE_CMPLS_CMP_DATA_MSG_TYPE_SFT 0
+ /* Completion of a Mid Path Command. Length = 16B */
+ #define CE_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT UINT32_C(0x1e)
+ #define CE_CMPLS_CMP_DATA_MSG_TYPE_LAST \
+ CE_CMPLS_CMP_DATA_MSG_TYPE_MID_PATH_SHORT
+ /*
+ * This value indicates the CE sub-type operation that is being
+ * completed.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_MASK UINT32_C(0x3c0)
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_SFT 6
+ /* Completion Response for a Solicited Command. */
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_SOLICITED (UINT32_C(0x0) << 6)
+ /* Error Completion (Unsolicited). */
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_ERR (UINT32_C(0x1) << 6)
+ /* Re-Sync Completion (Unsolicited) */
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_RESYNC (UINT32_C(0x2) << 6)
+ #define CE_CMPLS_CMP_DATA_MSG_SUBTYPE_LAST \
+ CE_CMPLS_CMP_DATA_MSG_SUBTYPE_RESYNC
+ /* This value indicates the status for the command. */
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_MASK UINT32_C(0x3c00)
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_SFT 10
+ /* Completed without error. */
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_OK \
+ (UINT32_C(0x0) << 10)
+ /* CFCK load error. */
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_CTX_LD_ERR \
+ (UINT32_C(0x1) << 10)
+ /* FID check error. */
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_FID_CHK_ERR \
+ (UINT32_C(0x2) << 10)
+ #define CE_CMPLS_CMP_DATA_MSG_STATUS_LAST \
+ CE_CMPLS_CMP_DATA_MSG_STATUS_FID_CHK_ERR
+ uint8_t unused0;
+ uint8_t mp_clients;
+ #define CE_CMPLS_CMP_DATA_MSG_UNUSED1_MASK UINT32_C(0xf)
+ #define CE_CMPLS_CMP_DATA_MSG_UNUSED1_SFT 0
+ /*
+ * This field represents the Mid-Path client that generated the
+ * completion.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_MASK UINT32_C(0xf0)
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_SFT 4
+ /* TX crypto engine block. */
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_TCE (UINT32_C(0x0) << 4)
+ /* RX crypto engine block. */
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_RCE (UINT32_C(0x1) << 4)
+ #define CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_LAST \
+ CE_CMPLS_CMP_DATA_MSG_MP_CLIENTS_RCE
+ /*
+ * This is a copy of the opaque field from the mid path BD of this
+ * command.
+ */
+ uint32_t opaque;
+ /* */
+ uint32_t kid_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes will
+ * write 1. The odd passes will write 0.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_V UINT32_C(0x1)
+ /*
+ * This field is the Crypto Context ID. The KID is used to store
+ * information used by the associated kTLS offloaded connection.
+ */
+ #define CE_CMPLS_CMP_DATA_MSG_KID_MASK UINT32_C(0x1ffffe)
+ #define CE_CMPLS_CMP_DATA_MSG_KID_SFT 1
+ uint32_t unused2;
+} __rte_packed;
+
/* cmpl_base (size:128b/16B) */
struct cmpl_base {
uint16_t type;
@@ -5423,27 +6609,32 @@ struct rx_tpa_v2_end_cmpl {
* records. Odd values indicate 32B
* records.
*/
- #define RX_TPA_V2_END_CMPL_TYPE_MASK UINT32_C(0x3f)
- #define RX_TPA_V2_END_CMPL_TYPE_SFT 0
+ #define RX_TPA_V2_END_CMPL_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define RX_TPA_V2_END_CMPL_TYPE_SFT 0
/*
* RX L2 TPA End Completion:
* Completion at the end of a TPA operation.
* Length = 32B
*/
- #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END UINT32_C(0x15)
+ #define RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END \
+ UINT32_C(0x15)
#define RX_TPA_V2_END_CMPL_TYPE_LAST \
RX_TPA_V2_END_CMPL_TYPE_RX_TPA_END
- #define RX_TPA_V2_END_CMPL_FLAGS_MASK UINT32_C(0xffc0)
- #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6
+ #define RX_TPA_V2_END_CMPL_FLAGS_MASK \
+ UINT32_C(0xffc0)
+ #define RX_TPA_V2_END_CMPL_FLAGS_SFT 6
/*
* When this bit is '1', it indicates a packet that has an
* error of some type. Type of error is indicated in
* error_flags.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_ERROR UINT32_C(0x40)
+ #define RX_TPA_V2_END_CMPL_FLAGS_ERROR \
+ UINT32_C(0x40)
/* This field indicates how the packet was placed in the buffer. */
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK UINT32_C(0x380)
- #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_MASK \
+ UINT32_C(0x380)
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_SFT 7
/*
* Jumbo:
* TPA Packet was placed using jumbo algorithm. This means
@@ -5482,11 +6673,30 @@ struct rx_tpa_v2_end_cmpl {
*/
#define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS \
(UINT32_C(0x6) << 7)
+ /*
+ * IOC/Header-Data Separation:
+ * Packet will be placed using In-Order Completion/HDS where
+ * the header is in the first packet buffer. Payload of each
+ * packet will be placed such that each packet starts at the
+ * beginning of an aggregation buffer.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_IOC_HDS \
+ (UINT32_C(0x7) << 7)
#define RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_LAST \
- RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_GRO_HDS
- /* unused is 2 b */
- #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_MASK UINT32_C(0xc00)
- #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED_SFT 10
+ RX_TPA_V2_END_CMPL_FLAGS_PLACEMENT_IOC_HDS
+ /* unused is 1 b */
+ #define RX_TPA_V2_END_CMPL_FLAGS_UNUSED \
+ UINT32_C(0x400)
+ /*
+ * This bit is '1' if metadata has been added to the end of the
+ * packet in host memory. Metadata starts at the first 32B boundary
+ * after the end of the packet for regular and jumbo placement.
+ * It starts at the first 32B boundary after the end of the header
+ * for HDS placement. The length of the metadata is indicated in the
+ * metadata itself.
+ */
+ #define RX_TPA_V2_END_CMPL_FLAGS_PKT_METADATA_PRESENT \
+ UINT32_C(0x800)
/*
* This value indicates what the inner packet determined for the
* packet was.
@@ -5496,8 +6706,9 @@ struct rx_tpa_v2_end_cmpl {
* field is valid and contains the TCP checksum.
* This also indicates that the payload_offset field is valid.
*/
- #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK UINT32_C(0xf000)
- #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12
+ #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_MASK \
+ UINT32_C(0xf000)
+ #define RX_TPA_V2_END_CMPL_FLAGS_ITYPE_SFT 12
/*
* This value is zero for TPA End completions.
* There is no data in the buffer that corresponds to the opaque
@@ -6047,6 +7258,12 @@ struct hwrm_async_event_cmpl {
/* Master function selection event */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_ERROR_RECOVERY \
UINT32_C(0x9)
+ /*
+ * An event signifying that a ring has been disabled by
+ * hw due to error.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_RING_MONITOR_MSG \
+ UINT32_C(0xa)
/* Function driver unloaded */
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_FUNC_DRVR_UNLOAD \
UINT32_C(0x10)
@@ -6156,6 +7373,9 @@ struct hwrm_async_event_cmpl {
*/
#define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_PFC_WATCHDOG_CFG_CHANGE \
UINT32_C(0x41)
+ /* Maximum Registrable event id. */
+ #define HWRM_ASYNC_EVENT_CMPL_EVENT_ID_MAX_RGTR_EVENT_ID \
+ UINT32_C(0x42)
/*
* A trace log message. This contains firmware trace logs string
* embedded in the asynchronous message. This is an experimental
@@ -6792,7 +8012,7 @@ struct hwrm_async_event_cmpl_reset_notify {
UINT32_C(0x8)
#define HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_LAST \
HWRM_ASYNC_EVENT_CMPL_RESET_NOTIFY_EVENT_ID_RESET_NOTIFY
- /* Event specific data */
+ /* Event specific data. The data is for internal debug use only. */
uint32_t event_data2;
uint8_t opaque_v;
/*
@@ -6936,6 +8156,71 @@ struct hwrm_async_event_cmpl_error_recovery {
UINT32_C(0x2)
} __rte_packed;
+/* hwrm_async_event_cmpl_ring_monitor_msg (size:128b/16B) */
+struct hwrm_async_event_cmpl_ring_monitor_msg {
+ uint16_t type;
+ /*
+ * This field indicates the exact type of the completion.
+ * By convention, the LSB identifies the length of the
+ * record in 16B units. Even values indicate 16B
+ * records. Odd values indicate 32B
+ * records.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_MASK \
+ UINT32_C(0x3f)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_SFT 0
+ /* HWRM Asynchronous Event Information */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_HWRM_ASYNC_EVENT \
+ UINT32_C(0x2e)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_TYPE_HWRM_ASYNC_EVENT
+ /* Identifiers of events. */
+ uint16_t event_id;
+ /* Ring Monitor Message. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_RING_MONITOR_MSG \
+ UINT32_C(0xa)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_ID_RING_MONITOR_MSG
+ /* Event specific data */
+ uint32_t event_data2;
+ /* Type of Ring disabled. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_MASK \
+ UINT32_C(0xff)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_SFT \
+ 0
+ /* tx ring disabled. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_TX \
+ UINT32_C(0x0)
+ /* rx ring disabled. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_RX \
+ UINT32_C(0x1)
+ /* cmpl ring disabled. */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_CMPL \
+ UINT32_C(0x2)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_LAST \
+ HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_EVENT_DATA2_DISABLE_RING_TYPE_CMPL
+ uint8_t opaque_v;
+ /*
+ * This value is written by the NIC such that it will be different
+ * for each pass through the completion queue. The even passes
+ * will write 1. The odd passes will write 0.
+ */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_V UINT32_C(0x1)
+ /* opaque is 7 b */
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_OPAQUE_MASK \
+ UINT32_C(0xfe)
+ #define HWRM_ASYNC_EVENT_CMPL_RING_MONITOR_MSG_OPAQUE_SFT 1
+ /* 8-lsb timestamp from POR (100-msec resolution) */
+ uint8_t timestamp_lo;
+ /* 16-lsb timestamp from POR (100-msec resolution) */
+ uint16_t timestamp_hi;
+ /*
+ * Event specific data. If ring_type_disabled indicates a tx,rx or cmpl
+ * then this field will indicate the ring id.
+ */
+ uint32_t event_data1;
+} __rte_packed;
+
/* hwrm_async_event_cmpl_func_drvr_unload (size:128b/16B) */
struct hwrm_async_event_cmpl_func_drvr_unload {
uint16_t type;
@@ -8396,6 +9681,388 @@ struct hwrm_async_event_cmpl_hwrm_error {
UINT32_C(0x1)
} __rte_packed;
+/* metadata_base_msg (size:64b/8B) */
+struct metadata_base_msg {
+ uint16_t md_type_link;
+ /* This field classifies the data present in the meta-data. */
+ #define METADATA_BASE_MSG_MD_TYPE_MASK UINT32_C(0x1f)
+ #define METADATA_BASE_MSG_MD_TYPE_SFT 0
+ /* Meta data fiels are not valid */
+ #define METADATA_BASE_MSG_MD_TYPE_NONE UINT32_C(0x0)
+ /*
+ * This setting is used when packets are coming in-order. Depending on
+ * the state of the receive context, the meta-data will carry different
+ * information.
+ */
+ #define METADATA_BASE_MSG_MD_TYPE_TLS_INSYNC UINT32_C(0x1)
+ /*
+ * With this setting HW passes the TCP sequence number of the TLS
+ * record that it is requesting a resync on in the meta data.
+ */
+ #define METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC UINT32_C(0x2)
+ #define METADATA_BASE_MSG_MD_TYPE_LAST \
+ METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC
+ /*
+ * This field indicates where the next metadata block starts. It is
+ * counted in 16B units. A value of zero indicates that there is no
+ * metadata.
+ */
+ #define METADATA_BASE_MSG_LINK_MASK UINT32_C(0x1e0)
+ #define METADATA_BASE_MSG_LINK_SFT 5
+ uint16_t unused0;
+ uint32_t unused1;
+} __rte_packed;
+
+/* tls_metadata_base_msg (size:64b/8B) */
+struct tls_metadata_base_msg {
+ uint32_t md_type_link_flags_kid_lo;
+ /* This field classifies the data present in the meta-data. */
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_MASK \
+ UINT32_C(0x1f)
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_SFT 0
+ /*
+ * This setting is used when packets are coming in-order. Depending on
+ * the state of the receive context, the meta-data will carry different
+ * information.
+ */
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_TLS_INSYNC \
+ UINT32_C(0x1)
+ /*
+ * With this setting HW passes the TCP sequence number of the TLS
+ * record that it is requesting a resync on in the meta data.
+ */
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC \
+ UINT32_C(0x2)
+ #define TLS_METADATA_BASE_MSG_MD_TYPE_LAST \
+ TLS_METADATA_BASE_MSG_MD_TYPE_TLS_RESYNC
+ /*
+ * This field indicates where the next metadata block starts. It is
+ * counted in 16B units. A value of zero indicates that there is no
+ * metadata.
+ */
+ #define TLS_METADATA_BASE_MSG_LINK_MASK \
+ UINT32_C(0x1e0)
+ #define TLS_METADATA_BASE_MSG_LINK_SFT 5
+ /* These are flags present in the metadata. */
+ #define TLS_METADATA_BASE_MSG_FLAGS_MASK \
+ UINT32_C(0x1fffe00)
+ #define TLS_METADATA_BASE_MSG_FLAGS_SFT 9
+ /*
+ * A value of 1 implies that the packet was decrypted by HW. Otherwise
+ * the packet is passed on as it came in on the wire.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_DECRYPTED \
+ UINT32_C(0x200)
+ /*
+ * This field indicates the state of the ghash field passed in the
+ * meta-data.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_MASK \
+ UINT32_C(0xc00)
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_SFT 10
+ /*
+ * This enumeration states that the ghash is not valid in the
+ * meta-data.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_NOT_VALID \
+ (UINT32_C(0x0) << 10)
+ /*
+ * This enumeration indicates that this pkt contains the record's
+ * tag and this pkt was received ooo, the partial_ghash field
+ * contains the ghash.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_CUR_REC \
+ (UINT32_C(0x1) << 10)
+ /*
+ * This enumeration indicates that the current record's tag wasn't
+ * seen and the chip is moving on to the next record, the
+ * partial_ghash field contains the ghash.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_PRIOR_REC \
+ (UINT32_C(0x2) << 10)
+ #define TLS_METADATA_BASE_MSG_FLAGS_GHASH_LAST \
+ TLS_METADATA_BASE_MSG_FLAGS_GHASH_PRIOR_REC
+ /* This field indicates the status of tag authentication. */
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_MASK \
+ UINT32_C(0x3000)
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12
+ /*
+ * This enumeration is set when there is no tags present in the
+ * packet.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_NONE \
+ (UINT32_C(0x0) << 12)
+ /*
+ * This enumeration states that there is at least one tag in the
+ * packet and every tag is valid.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_SUCCESS \
+ (UINT32_C(0x1) << 12)
+ /*
+ * This enumeration states that there is atleast one tag in the
+ * packet and atleast one of the tag is invalid. The entire packet
+ * is sent decrypted to the host.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE \
+ (UINT32_C(0x2) << 12)
+ #define TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_LAST \
+ TLS_METADATA_BASE_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE
+ /*
+ * A value of 1 indicates that this packet contains a record that
+ * starts in the packet and extends beyond the packet.
+ */
+ #define TLS_METADATA_BASE_MSG_FLAGS_HEADER_FLDS_VALID \
+ UINT32_C(0x4000)
+ /*
+ * This value indicates the lower 7-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_BASE_MSG_KID_LO_MASK \
+ UINT32_C(0xfe000000)
+ #define TLS_METADATA_BASE_MSG_KID_LO_SFT 25
+ uint16_t kid_hi;
+ /*
+ * This value indicates the upper 13-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_BASE_MSG_KID_HI_MASK UINT32_C(0x1fff)
+ #define TLS_METADATA_BASE_MSG_KID_HI_SFT 0
+ uint16_t unused0;
+} __rte_packed;
+
+/* tls_metadata_insync_msg (size:192b/24B) */
+struct tls_metadata_insync_msg {
+ uint32_t md_type_link_flags_kid_lo;
+ /* This field classifies the data present in the meta-data. */
+ #define TLS_METADATA_INSYNC_MSG_MD_TYPE_MASK \
+ UINT32_C(0x1f)
+ #define TLS_METADATA_INSYNC_MSG_MD_TYPE_SFT 0
+ /*
+ * This setting is used when packets are coming in-order. Depending on
+ * the state of the receive context, the meta-data will carry different
+ * information.
+ */
+ #define TLS_METADATA_INSYNC_MSG_MD_TYPE_TLS_INSYNC \
+ UINT32_C(0x1)
+ #define TLS_METADATA_INSYNC_MSG_MD_TYPE_LAST \
+ TLS_METADATA_INSYNC_MSG_MD_TYPE_TLS_INSYNC
+ /*
+ * This field indicates where the next metadata block starts. It is
+ * counted in 16B units. A value of zero indicates that there is no
+ * metadata.
+ */
+ #define TLS_METADATA_INSYNC_MSG_LINK_MASK \
+ UINT32_C(0x1e0)
+ #define TLS_METADATA_INSYNC_MSG_LINK_SFT 5
+ /* These are flags present in the metadata. */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_MASK \
+ UINT32_C(0x1fffe00)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_SFT 9
+ /*
+ * A value of 1 implies that the packet was decrypted by HW. Otherwise
+ * the packet is passed on as it came in on the wire.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_DECRYPTED \
+ UINT32_C(0x200)
+ /*
+ * This field indicates the state of the ghash field passed in the
+ * meta-data.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_MASK \
+ UINT32_C(0xc00)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_SFT 10
+ /*
+ * This enumeration states that the ghash is not valid in the
+ * meta-data.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_NOT_VALID \
+ (UINT32_C(0x0) << 10)
+ /*
+ * This enumeration indicates that this pkt contains the record's
+ * tag and this pkt was received ooo, the partial_ghash field
+ * contains the ghash.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_CUR_REC \
+ (UINT32_C(0x1) << 10)
+ /*
+ * This enumeration indicates that the current record's tag wasn't
+ * seen and the chip is moving on to the next record, the
+ * partial_ghash field contains the ghash.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_PRIOR_REC \
+ (UINT32_C(0x2) << 10)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_LAST \
+ TLS_METADATA_INSYNC_MSG_FLAGS_GHASH_PRIOR_REC
+ /* This field indicates the status of tag authentication. */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_MASK \
+ UINT32_C(0x3000)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12
+ /*
+ * This enumeration is set when there is no tags present in the
+ * packet.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE \
+ (UINT32_C(0x0) << 12)
+ /*
+ * This enumeration states that there is at least one tag in the
+ * packet and every tag is valid.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_SUCCESS \
+ (UINT32_C(0x1) << 12)
+ /*
+ * This enumeration states that there is atleast one tag in the
+ * packet and atleast one of the tag is invalid. The entire packet
+ * is sent decrypted to the host.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE \
+ (UINT32_C(0x2) << 12)
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_LAST \
+ TLS_METADATA_INSYNC_MSG_FLAGS_TAG_AUTH_STATUS_FAILURE
+ /*
+ * A value of 1 indicates that this packet contains a record that
+ * starts in the packet and extends beyond the packet.
+ */
+ #define TLS_METADATA_INSYNC_MSG_FLAGS_HEADER_FLDS_VALID \
+ UINT32_C(0x4000)
+ /*
+ * This value indicates the lower 7-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_INSYNC_MSG_KID_LO_MASK \
+ UINT32_C(0xfe000000)
+ #define TLS_METADATA_INSYNC_MSG_KID_LO_SFT 25
+ uint16_t kid_hi;
+ /*
+ * This value indicates the upper 13-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_INSYNC_MSG_KID_HI_MASK UINT32_C(0x1fff)
+ #define TLS_METADATA_INSYNC_MSG_KID_HI_SFT 0
+ /*
+ * This field is only valid when md_type is set to tls_insync. This field
+ * indicates the offset within the current TCP packet where the TLS header
+ * starts. If there are multiple TLS headers in the packet, this provides
+ * the offset of the last TLS header.
+ *
+ * The field is calculated by subtracting TCP sequence number of the first
+ * byte of the TCP payload of the packet from the TCP sequence number of
+ * the last TLS header in the packet.
+ */
+ uint16_t tls_header_offset;
+ /*
+ * This is the sequence Number of the record that was processed by the HW.
+ * If there are multiple records in a packet, this would be the sequence
+ * number of the last record.
+ */
+ uint64_t record_seq_num;
+ /*
+ * This field contains cumulative partial GHASH value of all the packets
+ * decrypted by the HW associated with a TLS record. This field is valid
+ * on when packets belonging to have arrived out-of-order and HW could
+ * not decrypt every packet and authenticate the record. Partial GHASH is
+ * only sent out with packet having the TAG field.
+ */
+ uint64_t partial_ghash;
+} __rte_packed;
+
+/* tls_metadata_resync_msg (size:256b/32B) */
+struct tls_metadata_resync_msg {
+ uint32_t md_type_link_flags_kid_lo;
+ /* This field classifies the data present in the meta-data. */
+ #define TLS_METADATA_RESYNC_MSG_MD_TYPE_MASK \
+ UINT32_C(0x1f)
+ #define TLS_METADATA_RESYNC_MSG_MD_TYPE_SFT 0
+ /*
+ * With this setting HW passes the TCP sequence number of the TLS
+ * record that it is requesting a resync on in the meta data.
+ */
+ #define TLS_METADATA_RESYNC_MSG_MD_TYPE_TLS_RESYNC \
+ UINT32_C(0x2)
+ #define TLS_METADATA_RESYNC_MSG_MD_TYPE_LAST \
+ TLS_METADATA_RESYNC_MSG_MD_TYPE_TLS_RESYNC
+ /*
+ * This field indicates where the next metadata block starts. It is
+ * counted in 16B units. A value of zero indicates that there is no
+ * metadata.
+ */
+ #define TLS_METADATA_RESYNC_MSG_LINK_MASK \
+ UINT32_C(0x1e0)
+ #define TLS_METADATA_RESYNC_MSG_LINK_SFT 5
+ /* These are flags present in the metadata. */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_MASK \
+ UINT32_C(0x1fffe00)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_SFT 9
+ /*
+ * A value of 1 implies that the packet was decrypted by HW. Otherwise
+ * the packet is passed on as it came in on the wire.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_DECRYPTED \
+ UINT32_C(0x200)
+ /*
+ * This field indicates the state of the ghash field passed in the
+ * meta-data.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_MASK \
+ UINT32_C(0xc00)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_SFT 10
+ /*
+ * This enumeration states that the ghash is not valid in the
+ * meta-data.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_NOT_VALID \
+ (UINT32_C(0x0) << 10)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_LAST \
+ TLS_METADATA_RESYNC_MSG_FLAGS_GHASH_NOT_VALID
+ /* This field indicates the status of tag authentication. */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_MASK \
+ UINT32_C(0x3000)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_SFT 12
+ /*
+ * This enumeration is set when there is no tags present in the
+ * packet.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE \
+ (UINT32_C(0x0) << 12)
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_LAST \
+ TLS_METADATA_RESYNC_MSG_FLAGS_TAG_AUTH_STATUS_NONE
+ /*
+ * A value of 1 indicates that this packet contains a record that
+ * starts in the packet and extends beyond the packet.
+ */
+ #define TLS_METADATA_RESYNC_MSG_FLAGS_HEADER_FLDS_VALID \
+ UINT32_C(0x4000)
+ /*
+ * This value indicates the lower 7-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_RESYNC_MSG_KID_LO_MASK \
+ UINT32_C(0xfe000000)
+ #define TLS_METADATA_RESYNC_MSG_KID_LO_SFT 25
+ uint16_t kid_hi;
+ /*
+ * This value indicates the upper 13-bit of the Crypto Key ID
+ * associated with this operation.
+ */
+ #define TLS_METADATA_RESYNC_MSG_KID_HI_MASK UINT32_C(0x1fff)
+ #define TLS_METADATA_RESYNC_MSG_KID_HI_SFT 0
+ /* This field is unused in this context. */
+ uint16_t metadata_0;
+ /*
+ * This field indicates the TCP sequence number of the TLS record that HW
+ * is requesting a resync on from the Driver. HW will keep a count of the
+ * TLS records it found after this record (delta_records). Driver will
+ * provide the TLS Record Sequence Number associated with the record. HW
+ * will add the delta_records to the Record Sequence Number provided by
+ * the driver and get back on sync.
+ */
+ uint32_t resync_record_tcp_seq_num;
+ uint32_t unused0;
+ /* This field is unused in this context. */
+ uint64_t metadata_2;
+ /* This field is unused in this context. */
+ uint64_t metadata_3;
+} __rte_packed;
+
/*******************
* hwrm_func_reset *
*******************/
@@ -9466,7 +11133,38 @@ struct hwrm_func_qcaps_output {
UINT32_C(0x80)
/* The maximum number of SCHQs supported by this device. */
uint8_t max_schqs;
- uint8_t unused_1[2];
+ uint8_t mpc_chnls_cap;
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the TX crypto engine block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_TCE UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the RX crypto engine block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_RCE UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the TX configurable flow processing block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_TE_CFA UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the RX configurable flow processing block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_RE_CFA UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates that HW and firmware
+ * supports the use of a MPC channel with destination set
+ * to the primate processor block.
+ */
+ #define HWRM_FUNC_QCAPS_OUTPUT_MPC_CHNLS_CAP_PRIMATE UINT32_C(0x10)
+ uint8_t unused_1;
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -9643,6 +11341,12 @@ struct hwrm_func_qcfg_output {
*/
#define HWRM_FUNC_QCFG_OUTPUT_FLAGS_PPP_PUSH_MODE_ENABLED \
UINT32_C(0x400)
+ /*
+ * If set to 1, then the firmware will notify driver using async
+ * event when a ring is disabled due to a Hardware error.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_FLAGS_RING_MONITOR_ENABLED \
+ UINT32_C(0x800)
/*
* This value is current MAC address configured for this
* function. A value of 00-00-00-00-00-00 indicates no
@@ -9959,7 +11663,40 @@ struct hwrm_func_qcfg_output {
#define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_SFT 0
/* This field specifies whether svif is valid or not */
#define HWRM_FUNC_QCFG_OUTPUT_SVIF_INFO_SVIF_VALID UINT32_C(0x8000)
- uint8_t unused_2[7];
+ uint8_t mpc_chnls;
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the TX crypto engine block is enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_TCE_ENABLED \
+ UINT32_C(0x1)
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the RX crypto engine block is enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_RCE_ENABLED \
+ UINT32_C(0x2)
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the TX configurable flow processing block is
+ * enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_TE_CFA_ENABLED \
+ UINT32_C(0x4)
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the RX configurable flow processing block is
+ * enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_RE_CFA_ENABLED \
+ UINT32_C(0x8)
+ /*
+ * When this bit is '1', it indicates that a MPC channel with
+ * destination set to the primate processor block is enabled.
+ */
+ #define HWRM_FUNC_QCFG_OUTPUT_MPC_CHNLS_PRIMATE_ENABLED \
+ UINT32_C(0x10)
+ uint8_t unused_2[6];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -10376,6 +12113,12 @@ struct hwrm_func_cfg_input {
*/
#define HWRM_FUNC_CFG_INPUT_ENABLES_SCHQ_ID \
UINT32_C(0x1000000)
+ /*
+ * This bit must be '1' for the mpc_chnls field to be
+ * configured.
+ */
+ #define HWRM_FUNC_CFG_INPUT_ENABLES_MPC_CHNLS \
+ UINT32_C(0x2000000)
/*
* The maximum transmission unit of the function.
* The HWRM should make sure that the mtu of
@@ -10642,7 +12385,74 @@ struct hwrm_func_cfg_input {
uint16_t num_mcast_filters;
/* Used by a PF driver to associate a SCHQ with a VF. */
uint16_t schq_id;
- uint8_t unused_0[6];
+ uint16_t mpc_chnls;
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the TX crypto engine block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TCE_ENABLE UINT32_C(0x1)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the TX crypto engine block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TCE_DISABLE UINT32_C(0x2)
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the RX crypto engine block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RCE_ENABLE UINT32_C(0x4)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the RX crypto engine block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RCE_DISABLE UINT32_C(0x8)
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the TX configurable flow processing
+ * block. When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TE_CFA_ENABLE \
+ UINT32_C(0x10)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the TX configurable flow processing
+ * block block. When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_TE_CFA_DISABLE \
+ UINT32_C(0x20)
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the RX configurable flow processing
+ * block. When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RE_CFA_ENABLE \
+ UINT32_C(0x40)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the RX configurable flow processing
+ * block block. When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_RE_CFA_DISABLE \
+ UINT32_C(0x80)
+ /*
+ * When this bit is '1', the caller requests to enable a MPC
+ * channel with destination to the primate processor block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_PRIMATE_ENABLE \
+ UINT32_C(0x100)
+ /*
+ * When this bit is '1', the caller requests to disable a MPC
+ * channel with destination to the primate processor block.
+ * When this bit is ‘0’, this flag has no effect.
+ */
+ #define HWRM_FUNC_CFG_INPUT_MPC_CHNLS_PRIMATE_DISABLE \
+ UINT32_C(0x200)
+ uint8_t unused_0[4];
} __rte_packed;
/* hwrm_func_cfg_output (size:128b/16B) */
@@ -10889,7 +12699,7 @@ struct hwrm_func_qstats_ext_input {
uint8_t unused_1[4];
} __rte_packed;
-/* hwrm_func_qstats_ext_output (size:1472b/184B) */
+/* hwrm_func_qstats_ext_output (size:1536b/192B) */
struct hwrm_func_qstats_ext_output {
/* The specific error status for the command. */
uint16_t error_code;
@@ -10941,6 +12751,8 @@ struct hwrm_func_qstats_ext_output {
uint64_t rx_tpa_bytes;
/* Number of TPA errors */
uint64_t rx_tpa_errors;
+ /* Number of TPA errors */
+ uint64_t rx_tpa_events;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
@@ -11842,6 +13654,125 @@ struct hwrm_func_resource_qcaps_output {
uint8_t valid;
} __rte_packed;
+/*****************************
+ * hwrm_func_vf_resource_cfg *
+ *****************************/
+
+
+/* hwrm_func_vf_resource_cfg_input (size:448b/56B) */
+struct hwrm_func_vf_resource_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* VF ID that is being configured by PF */
+ uint16_t vf_id;
+ /* Maximum guaranteed number of MSI-X vectors for the function */
+ uint16_t max_msix;
+ /* Minimum guaranteed number of RSS/COS contexts */
+ uint16_t min_rsscos_ctx;
+ /* Maximum non-guaranteed number of RSS/COS contexts */
+ uint16_t max_rsscos_ctx;
+ /* Minimum guaranteed number of completion rings */
+ uint16_t min_cmpl_rings;
+ /* Maximum non-guaranteed number of completion rings */
+ uint16_t max_cmpl_rings;
+ /* Minimum guaranteed number of transmit rings */
+ uint16_t min_tx_rings;
+ /* Maximum non-guaranteed number of transmit rings */
+ uint16_t max_tx_rings;
+ /* Minimum guaranteed number of receive rings */
+ uint16_t min_rx_rings;
+ /* Maximum non-guaranteed number of receive rings */
+ uint16_t max_rx_rings;
+ /* Minimum guaranteed number of L2 contexts */
+ uint16_t min_l2_ctxs;
+ /* Maximum non-guaranteed number of L2 contexts */
+ uint16_t max_l2_ctxs;
+ /* Minimum guaranteed number of VNICs */
+ uint16_t min_vnics;
+ /* Maximum non-guaranteed number of VNICs */
+ uint16_t max_vnics;
+ /* Minimum guaranteed number of statistic contexts */
+ uint16_t min_stat_ctx;
+ /* Maximum non-guaranteed number of statistic contexts */
+ uint16_t max_stat_ctx;
+ /* Minimum guaranteed number of ring groups */
+ uint16_t min_hw_ring_grps;
+ /* Maximum non-guaranteed number of ring groups */
+ uint16_t max_hw_ring_grps;
+ uint16_t flags;
+ /*
+ * If this bit is set, all minimum resources requested should be
+ * reserved if minimum >= 1, otherwise return error. In case of
+ * error, keep all existing reservations before the call.
+ */
+ #define HWRM_FUNC_VF_RESOURCE_CFG_INPUT_FLAGS_MIN_GUARANTEED \
+ UINT32_C(0x1)
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_func_vf_resource_cfg_output (size:256b/32B) */
+struct hwrm_func_vf_resource_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Reserved number of RSS/COS contexts */
+ uint16_t reserved_rsscos_ctx;
+ /* Reserved number of completion rings */
+ uint16_t reserved_cmpl_rings;
+ /* Reserved number of transmit rings */
+ uint16_t reserved_tx_rings;
+ /* Reserved number of receive rings */
+ uint16_t reserved_rx_rings;
+ /* Reserved number of L2 contexts */
+ uint16_t reserved_l2_ctxs;
+ /* Reserved number of VNICs */
+ uint16_t reserved_vnics;
+ /* Reserved number of statistic contexts */
+ uint16_t reserved_stat_ctx;
+ /* Reserved number of ring groups */
+ uint16_t reserved_hw_ring_grps;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/*********************************
* hwrm_func_backing_store_qcaps *
*********************************/
@@ -15343,10 +17274,11 @@ struct hwrm_port_phy_cfg_input {
* When set to 1, then the HWRM shall enable FEC autonegotitation
* on this port if supported. When enabled, at least one of the
* FEC modes must be advertised by enabling the fec_clause_74_enable,
- * fec_clause_91_enable, fec_rs544_1xn_enable, or fec_rs544_2xn_enable
- * flag. If none of the FEC mode is currently enabled, the HWRM
- * shall choose a default advertisement setting.
- * The default advertisement setting can be queried by calling
+ * fec_clause_91_enable, fec_rs544_1xn_enable, fec_rs544_ieee_enable,
+ * fec_rs272_1xn_enable, or fec_rs272_ieee_enable flag. If none
+ * of the FEC mode is currently enabled, the HWRM shall choose
+ * a default advertisement setting.
+ * The default advertisment setting can be queried by calling
* hwrm_port_phy_qcfg. Note that the link speed must be
* in autonegotiation mode for FEC autonegotiation to take effect.
* When set to 0, then this flag shall be ignored.
@@ -15357,7 +17289,8 @@ struct hwrm_port_phy_cfg_input {
UINT32_C(0x100)
/*
* When set to 1, then the HWRM shall disable FEC autonegotiation
- * on this port if supported.
+ * on this port and use forced FEC mode. In forced FEC mode, one
+ * or more FEC forced settings under the same clause can be set.
* When set to 0, then this flag shall be ignored.
* If FEC autonegotiation is not supported, then the HWRM shall ignore this
* flag.
@@ -15385,22 +17318,26 @@ struct hwrm_port_phy_cfg_input {
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE74_DISABLE \
UINT32_C(0x800)
/*
- * When set to 1, then the HWRM shall enable FEC CLAUSE 91 (Reed Solomon)
- * on this port if supported, by advertising FEC CLAUSE 91 if
- * FEC autonegotiation is enabled or force enabled otherwise.
+ * When set to 1, then the HWRM shall enable FEC CLAUSE 91
+ * (Reed Solomon RS(528,514) for NRZ) on this port if supported,
+ * by advertising FEC RS(528,514) if FEC autonegotiation is enabled
+ * or force enabled otherwise. In forced FEC mode, this flag
+ * will only take effect if the speed is NRZ. Additional
+ * RS544 or RS272 flags (also under clause 91) may be set for PAM4
+ * in forced FEC mode.
* When set to 0, then this flag shall be ignored.
- * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this
- * flag.
+ * If FEC RS(528,514) is not supported, then the HWRM shall ignore
+ * this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_ENABLE \
UINT32_C(0x1000)
/*
- * When set to 1, then the HWRM shall disable FEC CLAUSE 91 (Reed Solomon)
- * on this port if supported, by not advertising FEC CLAUSE 91 if
- * FEC autonegotiation is enabled or force disabled otherwise.
- * When set to 0, then this flag shall be ignored.
- * If FEC CLAUSE 91 is not supported, then the HWRM shall ignore this
- * flag.
+ * When set to 1, then the HWRM shall disable FEC CLAUSE 91
+ * (Reed Solomon RS(528,514) for NRZ) on this port if supported, by
+ * not advertising RS(528,514) if FEC autonegotiation is enabled or
+ * force disabled otherwise. When set to 0, then this flag shall be
+ * ignored. If FEC RS(528,514) is not supported, then the HWRM
+ * shall ignore this flag.
*/
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_CLAUSE91_DISABLE \
UINT32_C(0x2000)
@@ -15428,6 +17365,9 @@ struct hwrm_port_phy_cfg_input {
* When set to 1, then the HWRM shall enable FEC RS544_1XN
* on this port if supported, by advertising FEC RS544_1XN if
* FEC autonegotiation is enabled or force enabled otherwise.
+ * In forced mode, this flag will only take effect if the speed is
+ * PAM4. If this flag and fec_rs544_ieee_enable are set, the
+ * HWRM shall choose one of the RS544 modes.
* When set to 0, then this flag shall be ignored.
* If FEC RS544_1XN is not supported, then the HWRM shall ignore this
* flag.
@@ -15445,25 +17385,76 @@ struct hwrm_port_phy_cfg_input {
#define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_1XN_DISABLE \
UINT32_C(0x10000)
/*
- * When set to 1, then the HWRM shall enable FEC RS544_2XN
- * on this port if supported, by advertising FEC RS544_2XN if
+ * When set to 1, then the HWRM shall enable FEC RS(544,514)
+ * on this port if supported, by advertising FEC RS(544,514) if
* FEC autonegotiation is enabled or force enabled otherwise.
+ * In forced mode, this flag will only take effect if the speed is
+ * PAM4. If this flag and fec_rs544_1xn_enable are set, the
+ * HWRM shall choose one of the RS544 modes.
* When set to 0, then this flag shall be ignored.
- * If FEC RS544_2XN is not supported, then the HWRM shall ignore this
- * flag.
+ * If FEC RS(544,514) is not supported, then the HWRM shall ignore
+ * this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_2XN_ENABLE \
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_IEEE_ENABLE \
UINT32_C(0x20000)
/*
- * When set to 1, then the HWRM shall disable FEC RS544_2XN
- * on this port if supported, by not advertising FEC RS544_2XN if
+ * When set to 1, then the HWRM shall disable FEC RS(544,514)
+ * on this port if supported, by not advertising FEC RS(544,514) if
* FEC autonegotiation is enabled or force disabled otherwise.
* When set to 0, then this flag shall be ignored.
- * If FEC RS544_2XN is not supported, then the HWRM shall ignore this
- * flag.
+ * If FEC RS(544,514) is not supported, then the HWRM shall ignore
+ * this flag.
*/
- #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_2XN_DISABLE \
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS544_IEEE_DISABLE \
UINT32_C(0x40000)
+ /*
+ * When set to 1, then the HWRM shall enable FEC RS272_1XN
+ * on this port if supported, by advertising FEC RS272_1XN if
+ * FEC autonegotiation is enabled or force enabled otherwise.
+ * In forced mode, this flag will only take effect if the speed is
+ * PAM4. If this flag and fec_rs272_ieee_enable are set, the
+ * HWRM shall choose one of the RS272 modes. Note that RS272
+ * and RS544 modes cannot be set at the same time in forced FEC mode.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS272_1XN is not supported, then the HWRM shall ignore this
+ * flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_1XN_ENABLE \
+ UINT32_C(0x80000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC RS272_1XN
+ * on this port if supported, by not advertising FEC RS272_1XN if
+ * FEC autonegotiation is enabled or force disabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS272_1XN is not supported, then the HWRM shall ignore
+ * this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_1XN_DISABLE \
+ UINT32_C(0x100000)
+ /*
+ * When set to 1, then the HWRM shall enable FEC RS(272,257)
+ * on this port if supported, by advertising FEC RS(272,257) if
+ * FEC autonegotiation is enabled or force enabled otherwise.
+ * In forced mode, this flag will only take effect if the speed is
+ * PAM4. If this flag and fec_rs272_1xn_enable are set, the
+ * HWRM shall choose one of the RS272 modes. Note that RS272
+ * and RS544 modes cannot be set at the same time in forced FEC mode.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS(272,257) is not supported, then the HWRM shall ignore
+ * this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_IEEE_ENABLE \
+ UINT32_C(0x200000)
+ /*
+ * When set to 1, then the HWRM shall disable FEC RS(272,257)
+ * on this port if supported, by not advertising FEC RS(272,257) if
+ * FEC autonegotiation is enabled or force disabled otherwise.
+ * When set to 0, then this flag shall be ignored.
+ * If FEC RS(272,257) is not supported, then the HWRM shall ignore
+ * this flag.
+ */
+ #define HWRM_PORT_PHY_CFG_INPUT_FLAGS_FEC_RS272_IEEE_DISABLE \
+ UINT32_C(0x400000)
uint32_t enables;
/*
* This bit must be '1' for the auto_mode field to be
@@ -15939,7 +17930,7 @@ struct hwrm_port_phy_qcfg_input {
uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_port_phy_qcfg_output (size:832b/104B) */
+/* hwrm_port_phy_qcfg_output (size:768b/96B) */
struct hwrm_port_phy_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
@@ -15959,20 +17950,52 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK UINT32_C(0x2)
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LAST \
HWRM_PORT_PHY_QCFG_OUTPUT_LINK_LINK
+ uint8_t active_fec_signal_mode;
/*
* This value indicates the current link signaling mode of the
* connection.
*/
- uint8_t link_signal_mode;
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_MASK \
+ UINT32_C(0xf)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_SFT 0
/* NRZ signaling */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL_MODE_NRZ UINT32_C(0x0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_NRZ \
+ UINT32_C(0x0)
/* PAM4 signaling */
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL_MODE_PAM4 UINT32_C(0x1)
- #define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL_MODE_LAST \
- HWRM_PORT_PHY_QCFG_OUTPUT_LINK_SIGNAL_MODE_PAM4
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_PAM4 \
+ UINT32_C(0x1)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_SIGNAL_MODE_PAM4
+ /* This value indicates the current active FEC mode. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_MASK \
+ UINT32_C(0xf0)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_SFT 4
+ /* No active FEC */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_NONE_ACTIVE \
+ (UINT32_C(0x0) << 4)
+ /* FEC CLAUSE 74 (Fire Code) active, autonegotiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_CLAUSE74_ACTIVE \
+ (UINT32_C(0x1) << 4)
+ /* FEC CLAUSE 91 RS(528,514) active, autonegoatiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_CLAUSE91_ACTIVE \
+ (UINT32_C(0x2) << 4)
+ /* FEC RS544_1XN active, autonegoatiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS544_1XN_ACTIVE \
+ (UINT32_C(0x3) << 4)
+ /* FEC RS(544,528) active, autonegoatiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS544_IEEE_ACTIVE \
+ (UINT32_C(0x4) << 4)
+ /* FEC RS272_1XN active, autonegotiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_1XN_ACTIVE \
+ (UINT32_C(0x5) << 4)
+ /* FEC RS(272,257) active, autonegoatiated or forced. */
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE \
+ (UINT32_C(0x6) << 4)
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_LAST \
+ HWRM_PORT_PHY_QCFG_OUTPUT_ACTIVE_FEC_FEC_RS272_IEEE_ACTIVE
/*
* This value indicates the current link speed of the connection.
- * The link_signal_mode field indicates if the link is using
+ * The signal_mode field indicates if the link is using
* NRZ or PAM4 signaling.
*/
uint16_t link_speed;
@@ -16739,16 +18762,18 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ENABLED \
UINT32_C(0x10)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is supported on this port.
- * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not supported on this port.
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon RS(528,514) for
+ * NRZ) is supported on this port.
+ * When set to 0, then FEC RS(528,418) is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_SUPPORTED \
UINT32_C(0x20)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is enabled on this
- * port. This means that FEC CLAUSE 91 is either advertised if
- * FEC autonegotiation is enabled or FEC CLAUSE 91 is force enabled.
- * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is disabled if supported.
+ * When set to 1, then FEC CLAUSE 91 (Reed Solomon RS(528,514) for
+ * NRZ) is enabled on this port. This means that FEC RS(528,514) is
+ * either advertised if FEC autonegotiation is enabled or FEC
+ * RS(528,514) is force enabled. When set to 0, then FEC RS(528,514)
+ * is disabled if supported.
* This flag should be ignored if FEC CLAUSE 91 is not supported on this port.
*/
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ENABLED \
@@ -16769,59 +18794,49 @@ struct hwrm_port_phy_qcfg_output {
#define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_ENABLED \
UINT32_C(0x100)
/*
- * When set to 1, then FEC RS544_2XN is supported on this port.
- * When set to 0, then FEC RS544_2XN is not supported on this port.
+ * When set to 1, then FEC RS(544,514) is supported on this port.
+ * When set to 0, then FEC RS(544,514) is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_SUPPORTED \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_IEEE_SUPPORTED \
UINT32_C(0x200)
/*
- * When set to 1, then RS544_2XN is enabled on this
- * port. This means that FEC RS544_2XN is either advertised if
- * FEC autonegotiation is enabled or FEC RS544_2XN is force enabled.
- * When set to 0, then FEC RS544_2XN is disabled if supported.
- * This flag should be ignored if FEC RS544_2XN is not supported on this port.
+ * When set to 1, then RS(544,514) is enabled on this
+ * port. This means that FEC RS(544,514) is either advertised if
+ * FEC autonegotiation is enabled or FEC RS(544,514) is force
+ * enabled. When set to 0, then FEC RS(544,514) is disabled if supported.
+ * This flag should be ignored if FEC RS(544,514) is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_ENABLED \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_IEEE_ENABLED \
UINT32_C(0x400)
/*
- * When set to 1, then FEC CLAUSE 74 (Fire Code) is active on this
- * port, either successfully autonegoatiated or forced.
- * When set to 0, then FEC CLAUSE 74 (Fire Code) is not active.
- * This flag is only valid when link is up on this port.
- * At most only one active FEC flags (fec_clause74_active,
- * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ * When set to 1, then FEC RS272_1XN is supported on this port.
+ * When set to 0, then FEC RS272_1XN is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE74_ACTIVE \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_1XN_SUPPORTED \
UINT32_C(0x800)
/*
- * When set to 1, then FEC CLAUSE 91 (Reed Solomon) is active on this
- * port, either successfully autonegoatiated or forced.
- * When set to 0, then FEC CLAUSE 91 (Reed Solomon) is not active.
- * This flag is only valid when link is up on this port.
- * At most only one active FEC flags (fec_clause74_active,
- * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ * When set to 1, then RS272_1XN is enabled on this
+ * port. This means that FEC RS272_1XN is either advertised if
+ * FEC autonegotiation is enabled or FEC RS272_1XN is force
+ * enabled. When set to 0, then FEC RS272_1XN is disabled if supported.
+ * This flag should be ignored if FEC RS272_1XN is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_CLAUSE91_ACTIVE \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_1XN_ENABLED \
UINT32_C(0x1000)
/*
- * When set to 1, then FEC RS544_1XN is active on this
- * port, either successfully autonegoatiated or forced.
- * When set to 0, then FEC RS544_1XN is not active.
- * This flag is only valid when link is up on this port.
- * At most only one active FEC flags (fec_clause74_active,
- * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ * When set to 1, then FEC RS(272,514) is supported on this port.
+ * When set to 0, then FEC RS(272,514) is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_1XN_ACTIVE \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_IEEE_SUPPORTED \
UINT32_C(0x2000)
/*
- * When set to 1, then FEC RS544_2XN is active on this
- * port, either successfully autonegoatiated or forced.
- * When set to 0, then FEC RS544_2XN is not active.
- * This flag is only valid when link is up on this port.
- * At most only one active FEC flags (fec_clause74_active,
- * fec_clause91_active, fec_rs544_1xn, fec_rs544_2xn) can be set.
+ * When set to 1, then RS(272,257) is enabled on this
+ * port. This means that FEC RS(272,257) is either advertised if
+ * FEC autonegotiation is enabled or FEC RS(272,257) is force
+ * enabled. When set to 0, then FEC RS(272,257) is disabled if supported.
+ * This flag should be ignored if FEC RS(272,257) is not supported on this port.
*/
- #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS544_2XN_ACTIVE \
+ #define HWRM_PORT_PHY_QCFG_OUTPUT_FEC_CFG_FEC_RS272_IEEE_ENABLED \
UINT32_C(0x4000)
/*
* This value is indicates the duplex of the current
@@ -16900,7 +18915,7 @@ struct hwrm_port_phy_qcfg_output {
* The advertised PAM4 speeds for the port by the link partner.
* Each advertised speed will be set to '1'.
*/
- uint16_t link_partner_pam4_adv_speeds;
+ uint8_t link_partner_pam4_adv_speeds;
/* 50Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_PAM4_ADV_SPEEDS_50GB \
UINT32_C(0x1)
@@ -16910,7 +18925,6 @@ struct hwrm_port_phy_qcfg_output {
/* 200Gb link speed */
#define HWRM_PORT_PHY_QCFG_OUTPUT_LINK_PARTNER_PAM4_ADV_SPEEDS_200GB \
UINT32_C(0x4)
- uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -19110,7 +21124,7 @@ struct hwrm_port_lpbk_qstats_output {
************************/
-/* hwrm_port_ecn_qstats_input (size:192b/24B) */
+/* hwrm_port_ecn_qstats_input (size:256b/32B) */
struct hwrm_port_ecn_qstats_input {
/* The HWRM command request type. */
uint16_t req_type;
@@ -19145,10 +21159,31 @@ struct hwrm_port_ecn_qstats_input {
* multi-host mode.
*/
uint16_t port_id;
- uint8_t unused_0[6];
+ /*
+ * Size of the DMA buffer the caller has allocated for the firmware to
+ * write into.
+ */
+ uint16_t ecn_stat_buf_size;
+ uint8_t flags;
+ /* This value is not used to avoid backward compatibility issues. */
+ #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_UNUSED UINT32_C(0x0)
+ /*
+ * This bit is set to 1 when request is for a counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
+ #define HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_LAST \
+ HWRM_PORT_ECN_QSTATS_INPUT_FLAGS_COUNTER_MASK
+ uint8_t unused_0[3];
+ /*
+ * This is the host address where
+ * ECN port statistics will be stored
+ */
+ uint64_t ecn_stat_host_addr;
} __rte_packed;
-/* hwrm_port_ecn_qstats_output (size:384b/48B) */
+/* hwrm_port_ecn_qstats_output (size:128b/16B) */
struct hwrm_port_ecn_qstats_output {
/* The specific error status for the command. */
uint16_t error_code;
@@ -19158,28 +21193,14 @@ struct hwrm_port_ecn_qstats_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Number of packets marked in CoS queue 0. */
- uint32_t mark_cnt_cos0;
- /* Number of packets marked in CoS queue 1. */
- uint32_t mark_cnt_cos1;
- /* Number of packets marked in CoS queue 2. */
- uint32_t mark_cnt_cos2;
- /* Number of packets marked in CoS queue 3. */
- uint32_t mark_cnt_cos3;
- /* Number of packets marked in CoS queue 4. */
- uint32_t mark_cnt_cos4;
- /* Number of packets marked in CoS queue 5. */
- uint32_t mark_cnt_cos5;
- /* Number of packets marked in CoS queue 6. */
- uint32_t mark_cnt_cos6;
- /* Number of packets marked in CoS queue 7. */
- uint32_t mark_cnt_cos7;
+ /* Number of bytes of stats the firmware wrote to the DMA buffer. */
+ uint16_t ecn_stat_buf_size;
/*
* Bitmask that indicates which CoS queues have ECN marking enabled.
* Bit i corresponds to CoS queue i.
*/
uint8_t mark_en;
- uint8_t unused_0[6];
+ uint8_t unused_0[4];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -19190,6 +21211,59 @@ struct hwrm_port_ecn_qstats_output {
uint8_t valid;
} __rte_packed;
+/* ECN mark statistics format */
+/* port_stats_ecn (size:512b/64B) */
+struct port_stats_ecn {
+ /*
+ * Number of packets marked in CoS queue 0.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos0;
+ /*
+ * Number of packets marked in CoS queue 1.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos1;
+ /*
+ * Number of packets marked in CoS queue 2.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos2;
+ /*
+ * Number of packets marked in CoS queue 3.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos3;
+ /*
+ * Number of packets marked in CoS queue 4.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos4;
+ /*
+ * Number of packets marked in CoS queue 5.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos5;
+ /*
+ * Number of packets marked in CoS queue 6.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos6;
+ /*
+ * Number of packets marked in CoS queue 7.
+ * Or, if the driver requested counter masks, a mask to indicate the size
+ * of the counter.
+ */
+ uint64_t mark_cnt_cos7;
+} __rte_packed;
+
/***********************
* hwrm_port_clr_stats *
***********************/
@@ -19351,14 +21425,20 @@ struct hwrm_port_phy_qcaps_output {
*/
#define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_CUMULATIVE_COUNTERS_ON_RESET \
UINT32_C(0x10)
+ /*
+ * If set to 1, then this field indicates that the
+ * local loopback is not supported on this controller.
+ */
+ #define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_LOCAL_LPBK_NOT_SUPPORTED \
+ UINT32_C(0x20)
/*
* Reserved field. The HWRM shall set this field to 0.
* An HWRM client shall ignore this field.
*/
#define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_MASK \
- UINT32_C(0xe0)
+ UINT32_C(0xc0)
#define HWRM_PORT_PHY_QCAPS_OUTPUT_FLAGS_RSVD1_SFT \
- 5
+ 6
/* Number of front panel ports for this device. */
uint8_t port_cnt;
/* Not supported or unknown */
@@ -21479,6 +23559,161 @@ struct hwrm_port_phy_mdio_bus_release_output {
uint8_t valid;
} __rte_packed;
+/************************
+ * hwrm_port_tx_fir_cfg *
+ ************************/
+
+
+/* hwrm_port_tx_fir_cfg_input (size:320b/40B) */
+struct hwrm_port_tx_fir_cfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Modulation types of TX FIR: NRZ, PAM4. */
+ uint8_t mod_type;
+ /* For NRZ */
+ #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_NRZ UINT32_C(0x0)
+ /* For PAM4 */
+ #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_PAM4 UINT32_C(0x1)
+ #define HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_LAST \
+ HWRM_PORT_TX_FIR_CFG_INPUT_MOD_TYPE_PAM4
+ /* The lane mask of the lane TX FIR will be configured. */
+ uint8_t lane_mask;
+ uint8_t unused_0[2];
+ /* Value1 of TX FIR, required for NRZ or PAM4. */
+ uint32_t txfir_val_1;
+ /* Value2 of TX FIR, required for NRZ or PAM4. */
+ uint32_t txfir_val_2;
+ /* Value3 of TX FIR, required for PAM4. */
+ uint32_t txfir_val_3;
+ /* Value4 of TX FIR, required for PAM4. */
+ uint32_t txfir_val_4;
+ uint8_t unused_1[4];
+} __rte_packed;
+
+/* hwrm_port_tx_fir_cfg_output (size:128b/16B) */
+struct hwrm_port_tx_fir_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*************************
+ * hwrm_port_tx_fir_qcfg *
+ *************************/
+
+
+/* hwrm_port_tx_fir_qcfg_input (size:192b/24B) */
+struct hwrm_port_tx_fir_qcfg_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Modulation types of TX FIR: NRZ, PAM4. */
+ uint8_t mod_type;
+ /* For NRZ */
+ #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_NRZ UINT32_C(0x0)
+ /* For PAM4 */
+ #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_PAM4 UINT32_C(0x1)
+ #define HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_LAST \
+ HWRM_PORT_TX_FIR_QCFG_INPUT_MOD_TYPE_PAM4
+ /* The ID of the lane TX FIR will be queried. */
+ uint8_t lane_id;
+ uint8_t unused[6];
+} __rte_packed;
+
+/* hwrm_port_tx_fir_qcfg_output (size:256b/32B) */
+struct hwrm_port_tx_fir_qcfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Value1 of TX FIR, required for NRZ or PAM4. */
+ uint32_t txfir_val_1;
+ /* Value2 of TX FIR, required for NRZ or PAM4. */
+ uint32_t txfir_val_2;
+ /* Value3 of TX FIR, required for PAM4. */
+ uint32_t txfir_val_3;
+ /* Value4 of TX FIR, required for PAM4. */
+ uint32_t txfir_val_4;
+ uint8_t unused[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
/***********************
* hwrm_queue_qportcfg *
***********************/
@@ -21642,8 +23877,10 @@ struct hwrm_queue_qportcfg_output {
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
@@ -21678,8 +23915,10 @@ struct hwrm_queue_qportcfg_output {
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
@@ -21714,8 +23953,10 @@ struct hwrm_queue_qportcfg_output {
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
@@ -21750,8 +23991,10 @@ struct hwrm_queue_qportcfg_output {
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
@@ -21786,8 +24029,10 @@ struct hwrm_queue_qportcfg_output {
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
@@ -21822,8 +24067,10 @@ struct hwrm_queue_qportcfg_output {
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
@@ -21858,8 +24105,10 @@ struct hwrm_queue_qportcfg_output {
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
@@ -21894,8 +24143,10 @@ struct hwrm_queue_qportcfg_output {
* that takes a queue id.
* # IDs must always be queried by this command before any use
* by the driver or software.
- * # Any driver or software should not make any assumptions about
- * queue IDs.
+ * # The CoS queue index is obtained by applying modulo 10 to the
+ * CoS queue ID. Valid CoS queue indexes are in the range of 0 to 7.
+ * The CoS queue index is used to reference port statistics for the
+ * CoS queue.
* # A value of 0xff indicates that the queue is not available.
* # Available queues may not be in sequential order.
*/
@@ -27251,6 +29502,12 @@ struct hwrm_ring_alloc_input {
*/
#define HWRM_RING_ALLOC_INPUT_ENABLES_SCHQ_ID \
UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the mpc_chnls_type field to be
+ * configured.
+ */
+ #define HWRM_RING_ALLOC_INPUT_ENABLES_MPC_CHNLS_TYPE \
+ UINT32_C(0x400)
/* Ring Type. */
uint8_t ring_type;
/* L2 Completion Ring (CR) */
@@ -27483,7 +29740,36 @@ struct hwrm_ring_alloc_input {
#define HWRM_RING_ALLOC_INPUT_INT_MODE_POLL UINT32_C(0x3)
#define HWRM_RING_ALLOC_INPUT_INT_MODE_LAST \
HWRM_RING_ALLOC_INPUT_INT_MODE_POLL
- uint8_t unused_4[3];
+ /* Midpath channel type */
+ uint8_t mpc_chnls_type;
+ /*
+ * Indicate the TX ring alloc MPC channel type is a MPC channel
+ * with destination to the TX crypto engine block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_TCE UINT32_C(0x0)
+ /*
+ * Indicate the RX ring alloc MPC channel type is a MPC channel
+ * with destination to the RX crypto engine block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_RCE UINT32_C(0x1)
+ /*
+ * Indicate the RX ring alloc MPC channel type is a MPC channel
+ * with destination to the TX configurable flow processing block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_TE_CFA UINT32_C(0x2)
+ /*
+ * Indicate the RX ring alloc MPC channel type is a MPC channel
+ * with destination to the RX configurable flow processing block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_RE_CFA UINT32_C(0x3)
+ /*
+ * Indicate the RX ring alloc MPC channel type is a MPC channel
+ * with destination to the primate processor block.
+ */
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_PRIMATE UINT32_C(0x4)
+ #define HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_LAST \
+ HWRM_RING_ALLOC_INPUT_MPC_CHNLS_TYPE_PRIMATE
+ uint8_t unused_4[2];
/*
* The cq_handle is specified when allocating a completion ring. For
* devices that support NQs, this cq_handle will be included in the
@@ -35339,13 +37625,13 @@ struct hwrm_cfa_tcp_flag_process_qcfg_output {
uint8_t valid;
} __rte_packed;
-/**********************
- * hwrm_cfa_pair_info *
- **********************/
+/**************************
+ * hwrm_cfa_vf_pair_alloc *
+ **************************/
-/* hwrm_cfa_pair_info_input (size:448b/56B) */
-struct hwrm_cfa_pair_info_input {
+/* hwrm_cfa_vf_pair_alloc_input (size:448b/56B) */
+struct hwrm_cfa_vf_pair_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -35374,23 +37660,17 @@ struct hwrm_cfa_pair_info_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /* If this flag is set, lookup by name else lookup by index. */
- #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
- /* If this flag is set, lookup by PF id and VF id. */
- #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2)
- /* Pair table index. */
- uint16_t pair_index;
- /* Pair pf index. */
- uint8_t pair_pfid;
- /* Pair vf index. */
- uint8_t pair_vfid;
- /* Pair name (32 byte string). */
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_a_id;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_b_id;
+ uint8_t unused_0[4];
+ /* VF Pair name (32 byte string). */
char pair_name[32];
} __rte_packed;
-/* hwrm_cfa_pair_info_output (size:576b/72B) */
-struct hwrm_cfa_pair_info_output {
+/* hwrm_cfa_vf_pair_alloc_output (size:128b/16B) */
+struct hwrm_cfa_vf_pair_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -35399,56 +37679,6 @@ struct hwrm_cfa_pair_info_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Pair table index. */
- uint16_t next_pair_index;
- /* Pair member a's fid. */
- uint16_t a_fid;
- /* Logical host number. */
- uint8_t host_a_index;
- /* Logical PF number. */
- uint8_t pf_a_index;
- /* Pair member a's Linux logical VF number. */
- uint16_t vf_a_index;
- /* Rx CFA code. */
- uint16_t rx_cfa_code_a;
- /* Tx CFA action. */
- uint16_t tx_cfa_action_a;
- /* Pair member b's fid. */
- uint16_t b_fid;
- /* Logical host number. */
- uint8_t host_b_index;
- /* Logical PF number. */
- uint8_t pf_b_index;
- /* Pair member a's Linux logical VF number. */
- uint16_t vf_b_index;
- /* Rx CFA code. */
- uint16_t rx_cfa_code_b;
- /* Tx CFA action. */
- uint16_t tx_cfa_action_b;
- /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */
- uint8_t pair_mode;
- /* Pair between VF on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
- /* Pair between REP on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
- /* Pair between REP on local host with REP on specified host. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
- /* Pair for the proxy interface. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3)
- /* Pair for the PF interface. */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \
- HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR
- /* Pair state. */
- uint8_t pair_state;
- /* Pair has been allocated */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
- /* Both pair members are active */
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2)
- #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
- HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
- /* Pair name (32 byte string). */
- char pair_name[32];
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
@@ -35460,85 +37690,13 @@ struct hwrm_cfa_pair_info_output {
uint8_t valid;
} __rte_packed;
-/**********************
- * hwrm_cfa_vfr_alloc *
- **********************/
-
-
-/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */
-struct hwrm_cfa_vfr_alloc_input {
- /* The HWRM command request type. */
- uint16_t req_type;
- /*
- * The completion ring to send the completion event on. This should
- * be the NQ ID returned from the `nq_alloc` HWRM command.
- */
- uint16_t cmpl_ring;
- /*
- * The sequence ID is used by the driver for tracking multiple
- * commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
- */
- uint16_t seq_id;
- /*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
- * * 0xFFFD - Reserved for user-space HWRM interface
- * * 0xFFFF - HWRM
- */
- uint16_t target_id;
- /*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
- */
- uint64_t resp_addr;
- /* Logical VF number (range: 0 -> MAX_VFS -1). */
- uint16_t vf_id;
- /*
- * This field is reserved for the future use.
- * It shall be set to 0.
- */
- uint16_t reserved;
- uint8_t unused_0[4];
- /* VF Representor name (32 byte string). */
- char vfr_name[32];
-} __rte_packed;
-
-/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */
-struct hwrm_cfa_vfr_alloc_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- /* Rx CFA code. */
- uint16_t rx_cfa_code;
- /* Tx CFA action. */
- uint16_t tx_cfa_action;
- uint8_t unused_0[3];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __rte_packed;
-
-/*********************
- * hwrm_cfa_vfr_free *
- *********************/
+/*************************
+ * hwrm_cfa_vf_pair_free *
+ *************************/
-/* hwrm_cfa_vfr_free_input (size:448b/56B) */
-struct hwrm_cfa_vfr_free_input {
+/* hwrm_cfa_vf_pair_free_input (size:384b/48B) */
+struct hwrm_cfa_vf_pair_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -35567,16 +37725,12 @@ struct hwrm_cfa_vfr_free_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* VF Representor name (32 byte string). */
- char vfr_name[32];
- /* Logical VF number (range: 0 -> MAX_VFS -1). */
- uint16_t vf_id;
- uint16_t reserved;
- uint8_t unused_0[4];
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
} __rte_packed;
-/* hwrm_cfa_vfr_free_output (size:128b/16B) */
-struct hwrm_cfa_vfr_free_output {
+/* hwrm_cfa_vf_pair_free_output (size:128b/16B) */
+struct hwrm_cfa_vf_pair_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -35588,7 +37742,7 @@ struct hwrm_cfa_vfr_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
@@ -35596,15 +37750,13 @@ struct hwrm_cfa_vfr_free_output {
uint8_t valid;
} __rte_packed;
+/*************************
+ * hwrm_cfa_vf_pair_info *
+ *************************/
-/***************************************
- * hwrm_cfa_redirect_query_tunnel_type *
- ***************************************/
-
-
-/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */
-struct hwrm_cfa_redirect_query_tunnel_type_input {
+/* hwrm_cfa_vf_pair_info_input (size:448b/56B) */
+struct hwrm_cfa_vf_pair_info_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -35633,13 +37785,18 @@ struct hwrm_cfa_redirect_query_tunnel_type_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* The source function id. */
- uint16_t src_fid;
- uint8_t unused_0[6];
+ uint32_t flags;
+ /* If this flag is set, lookup by name else lookup by index. */
+ #define HWRM_CFA_VF_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
+ /* vf pair table index. */
+ uint16_t vf_pair_index;
+ uint8_t unused_0[2];
+ /* VF Pair name (32 byte string). */
+ char vf_pair_name[32];
} __rte_packed;
-/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */
-struct hwrm_cfa_redirect_query_tunnel_type_output {
+/* hwrm_cfa_vf_pair_info_output (size:512b/64B) */
+struct hwrm_cfa_vf_pair_info_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -35648,51 +37805,28 @@ struct hwrm_cfa_redirect_query_tunnel_type_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Tunnel Mask. */
- uint32_t tunnel_mask;
- /* Non-tunnel */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \
- UINT32_C(0x1)
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \
- UINT32_C(0x2)
- /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \
- UINT32_C(0x4)
- /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \
- UINT32_C(0x8)
- /* IP in IP */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \
- UINT32_C(0x10)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \
- UINT32_C(0x20)
- /* Multi-Protocol Label Switching (MPLS) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \
- UINT32_C(0x40)
- /* Stateless Transport Tunnel (STT) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \
- UINT32_C(0x80)
- /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \
- UINT32_C(0x100)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \
- UINT32_C(0x200)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \
- UINT32_C(0x400)
- /* Any tunneled traffic */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \
- UINT32_C(0x800)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \
- UINT32_C(0x1000)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \
- UINT32_C(0x2000)
- uint8_t unused_0[3];
+ /* vf pair table index. */
+ uint16_t next_vf_pair_index;
+ /* vf pair member a's vf_fid. */
+ uint16_t vf_a_fid;
+ /* vf pair member a's Linux logical VF number. */
+ uint16_t vf_a_index;
+ /* vf pair member b's vf_fid. */
+ uint16_t vf_b_fid;
+ /* vf pair member a's Linux logical VF number. */
+ uint16_t vf_b_index;
+ /* vf pair state. */
+ uint8_t pair_state;
+ /* Pair has been allocated */
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
+ /* Both pair members are active */
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2)
+ #define HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
+ HWRM_CFA_VF_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
+ uint8_t unused_0[5];
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -35703,13 +37837,13 @@ struct hwrm_cfa_redirect_query_tunnel_type_output {
uint8_t valid;
} __rte_packed;
-/*************************
- * hwrm_cfa_ctx_mem_rgtr *
- *************************/
+/***********************
+ * hwrm_cfa_pair_alloc *
+ ***********************/
-/* hwrm_cfa_ctx_mem_rgtr_input (size:256b/32B) */
-struct hwrm_cfa_ctx_mem_rgtr_input {
+/* hwrm_cfa_pair_alloc_input (size:576b/72B) */
+struct hwrm_cfa_pair_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -35738,44 +37872,104 @@ struct hwrm_cfa_ctx_mem_rgtr_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint16_t flags;
- /* Counter PBL indirect levels. */
- uint8_t page_level;
- /* PBL pointer is physical start address. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
- /* PBL pointer points to PTE table. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
- /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
- HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
- /* Page size. */
- uint8_t page_size;
- /* 4KB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
- /* 8KB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
- /* 64KB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
- /* 256KB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
- /* 1MB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
- /* 2MB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
- /* 4MB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
- /* 1GB page size. */
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
- #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
- HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G
- uint32_t unused_0;
- /* Pointer to the PBL, or PDL depending on number of levels */
- uint64_t page_dir;
+ /*
+ * Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair,
+ * 5-rep2fn_mod, 6-rep2fn_modall, 7-rep2fn_truflow).
+ */
+ uint16_t pair_mode;
+ /* Pair between VF on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_VF2FN \
+ UINT32_C(0x0)
+ /* Pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN \
+ UINT32_C(0x1)
+ /* Pair between REP on local host with REP on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2REP \
+ UINT32_C(0x2)
+ /* Pair for the proxy interface. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PROXY \
+ UINT32_C(0x3)
+ /* Pair for the PF interface. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PFPAIR \
+ UINT32_C(0x4)
+ /* Modify existing rep2fn pair and move pair to new PF. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MOD \
+ UINT32_C(0x5)
+ /* Modify exsiting rep2fn pairs paired with same PF and move pairs to new PF. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL \
+ UINT32_C(0x6)
+ /* Truflow pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_TRUFLOW \
+ UINT32_C(0x7)
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_LAST \
+ HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_TRUFLOW
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_a_id;
+ /* Logical Host (0xff-local host). */
+ uint8_t host_b_id;
+ /* Logical PF (0xff-PF for command channel). */
+ uint8_t pf_b_id;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_b_id;
+ /* Loopback port (0xff-internal loopback), valid for mode-3. */
+ uint8_t port_id;
+ /* Priority used for encap of loopback packets valid for mode-3. */
+ uint8_t pri;
+ /* New PF for rep2fn modify, valid for mode 5. */
+ uint16_t new_pf_fid;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the q_ab field to be
+ * configured.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_AB_VALID UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the q_ba field to be
+ * configured.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_BA_VALID UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the fc_ab field to be
+ * configured.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_AB_VALID UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the fc_ba field to be
+ * configured.
+ */
+ #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_BA_VALID UINT32_C(0x8)
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+ /*
+ * The q_ab value specifies the logical index of the TX/RX CoS
+ * queue to be assigned for traffic in the A to B direction of
+ * the interface pair. The default value is 0.
+ */
+ uint8_t q_ab;
+ /*
+ * The q_ba value specifies the logical index of the TX/RX CoS
+ * queue to be assigned for traffic in the B to A direction of
+ * the interface pair. The default value is 1.
+ */
+ uint8_t q_ba;
+ /*
+ * Specifies whether RX ring flow control is disabled (0) or enabled
+ * (1) in the A to B direction. The default value is 0, meaning that
+ * packets will be dropped when the B-side RX rings are full.
+ */
+ uint8_t fc_ab;
+ /*
+ * Specifies whether RX ring flow control is disabled (0) or enabled
+ * (1) in the B to A direction. The default value is 1, meaning that
+ * the RX CoS queue will be flow controlled when the A-side RX rings
+ * are full.
+ */
+ uint8_t fc_ba;
+ uint8_t unused_1[4];
} __rte_packed;
-/* hwrm_cfa_ctx_mem_rgtr_output (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_rgtr_output {
+/* hwrm_cfa_pair_alloc_output (size:192b/24B) */
+struct hwrm_cfa_pair_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -35784,12 +37978,15 @@ struct hwrm_cfa_ctx_mem_rgtr_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
- */
- uint16_t ctx_id;
- uint8_t unused_0[5];
+ /* Only valid for modes 1 and 2. */
+ uint16_t rx_cfa_code_a;
+ /* Only valid for modes 1 and 2. */
+ uint16_t tx_cfa_action_a;
+ /* Only valid for mode 2. */
+ uint16_t rx_cfa_code_b;
+ /* Only valid for mode 2. */
+ uint16_t tx_cfa_action_b;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -35800,13 +37997,13 @@ struct hwrm_cfa_ctx_mem_rgtr_output {
uint8_t valid;
} __rte_packed;
-/***************************
- * hwrm_cfa_ctx_mem_unrgtr *
- ***************************/
+/**********************
+ * hwrm_cfa_pair_free *
+ **********************/
-/* hwrm_cfa_ctx_mem_unrgtr_input (size:192b/24B) */
-struct hwrm_cfa_ctx_mem_unrgtr_input {
+/* hwrm_cfa_pair_free_input (size:448b/56B) */
+struct hwrm_cfa_pair_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -35835,16 +38032,40 @@ struct hwrm_cfa_ctx_mem_unrgtr_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* VF Pair name (32 byte string). */
+ char pair_name[32];
+ /* Logical PF (0xff-PF for command channel). */
+ uint8_t pf_b_id;
+ uint8_t unused_0[3];
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_id;
/*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
+ * Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair,
+ * 5-rep2fn_mod, 6-rep2fn_modall, 7-rep2fn_truflow).
*/
- uint16_t ctx_id;
- uint8_t unused_0[6];
+ uint16_t pair_mode;
+ /* Pair between VF on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
+ /* Pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
+ /* Pair between REP on local host with REP on specified host. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
+ /* Pair for the proxy interface. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_PROXY UINT32_C(0x3)
+ /* Pair for the PF interface. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
+ /* Modify existing rep2fn pair and move pair to new PF. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_MOD UINT32_C(0x5)
+ /* Modify existing rep2fn pairs paired with same PF and move pairs to new PF. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_MODALL UINT32_C(0x6)
+ /* Truflow pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_TRUFLOW UINT32_C(0x7)
+ #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_LAST \
+ HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_TRUFLOW
} __rte_packed;
-/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_unrgtr_output {
+/* hwrm_cfa_pair_free_output (size:128b/16B) */
+struct hwrm_cfa_pair_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -35864,13 +38085,13 @@ struct hwrm_cfa_ctx_mem_unrgtr_output {
uint8_t valid;
} __rte_packed;
-/*************************
- * hwrm_cfa_ctx_mem_qctx *
- *************************/
+/**********************
+ * hwrm_cfa_pair_info *
+ **********************/
-/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */
-struct hwrm_cfa_ctx_mem_qctx_input {
+/* hwrm_cfa_pair_info_input (size:448b/56B) */
+struct hwrm_cfa_pair_info_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -35899,16 +38120,23 @@ struct hwrm_cfa_ctx_mem_qctx_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * Id/Handle to the recently register context memory. This handle is passed
- * to the CFA feature.
- */
- uint16_t ctx_id;
- uint8_t unused_0[6];
+ uint32_t flags;
+ /* If this flag is set, lookup by name else lookup by index. */
+ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_TYPE UINT32_C(0x1)
+ /* If this flag is set, lookup by PF id and VF id. */
+ #define HWRM_CFA_PAIR_INFO_INPUT_FLAGS_LOOKUP_REPRE UINT32_C(0x2)
+ /* Pair table index. */
+ uint16_t pair_index;
+ /* Pair pf index. */
+ uint8_t pair_pfid;
+ /* Pair vf index. */
+ uint8_t pair_vfid;
+ /* Pair name (32 byte string). */
+ char pair_name[32];
} __rte_packed;
-/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */
-struct hwrm_cfa_ctx_mem_qctx_output {
+/* hwrm_cfa_pair_info_output (size:576b/72B) */
+struct hwrm_cfa_pair_info_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -35917,41 +38145,57 @@ struct hwrm_cfa_ctx_mem_qctx_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint16_t flags;
- /* Counter PBL indirect levels. */
- uint8_t page_level;
- /* PBL pointer is physical start address. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
- /* PBL pointer points to PTE table. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
- /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \
- HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2
- /* Page size. */
- uint8_t page_size;
- /* 4KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
- /* 8KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
- /* 64KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
- /* 256KB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
- /* 1MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
- /* 2MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
- /* 4MB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
- /* 1GB page size. */
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
- #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \
- HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G
- uint8_t unused_0[4];
- /* Pointer to the PBL, or PDL depending on number of levels */
- uint64_t page_dir;
- uint8_t unused_1[7];
+ /* Pair table index. */
+ uint16_t next_pair_index;
+ /* Pair member a's fid. */
+ uint16_t a_fid;
+ /* Logical host number. */
+ uint8_t host_a_index;
+ /* Logical PF number. */
+ uint8_t pf_a_index;
+ /* Pair member a's Linux logical VF number. */
+ uint16_t vf_a_index;
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code_a;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action_a;
+ /* Pair member b's fid. */
+ uint16_t b_fid;
+ /* Logical host number. */
+ uint8_t host_b_index;
+ /* Logical PF number. */
+ uint8_t pf_b_index;
+ /* Pair member a's Linux logical VF number. */
+ uint16_t vf_b_index;
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code_b;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action_b;
+ /* Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair). */
+ uint8_t pair_mode;
+ /* Pair between VF on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
+ /* Pair between REP on local host with PF or VF on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
+ /* Pair between REP on local host with REP on specified host. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
+ /* Pair for the proxy interface. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PROXY UINT32_C(0x3)
+ /* Pair for the PF interface. */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_LAST \
+ HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_MODE_PFPAIR
+ /* Pair state. */
+ uint8_t pair_state;
+ /* Pair has been allocated */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ALLOCATED UINT32_C(0x1)
+ /* Both pair members are active */
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE UINT32_C(0x2)
+ #define HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_LAST \
+ HWRM_CFA_PAIR_INFO_OUTPUT_PAIR_STATE_ACTIVE
+ /* Pair name (32 byte string). */
+ char pair_name[32];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -35962,13 +38206,13 @@ struct hwrm_cfa_ctx_mem_qctx_output {
uint8_t valid;
} __rte_packed;
-/**************************
- * hwrm_cfa_ctx_mem_qcaps *
- **************************/
+/**********************
+ * hwrm_cfa_vfr_alloc *
+ **********************/
-/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_qcaps_input {
+/* hwrm_cfa_vfr_alloc_input (size:448b/56B) */
+struct hwrm_cfa_vfr_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -35997,10 +38241,20 @@ struct hwrm_cfa_ctx_mem_qcaps_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_id;
+ /*
+ * This field is reserved for the future use.
+ * It shall be set to 0.
+ */
+ uint16_t reserved;
+ uint8_t unused_0[4];
+ /* VF Representor name (32 byte string). */
+ char vfr_name[32];
} __rte_packed;
-/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */
-struct hwrm_cfa_ctx_mem_qcaps_output {
+/* hwrm_cfa_vfr_alloc_output (size:128b/16B) */
+struct hwrm_cfa_vfr_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36009,9 +38263,11 @@ struct hwrm_cfa_ctx_mem_qcaps_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Indicates the maximum number of context memory which can be registered. */
- uint16_t max_entries;
- uint8_t unused_0[5];
+ /* Rx CFA code. */
+ uint16_t rx_cfa_code;
+ /* Tx CFA action. */
+ uint16_t tx_cfa_action;
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -36022,13 +38278,13 @@ struct hwrm_cfa_ctx_mem_qcaps_output {
uint8_t valid;
} __rte_packed;
-/**********************
- * hwrm_cfa_eem_qcaps *
- **********************/
+/*********************
+ * hwrm_cfa_vfr_free *
+ *********************/
-/* hwrm_cfa_eem_qcaps_input (size:192b/24B) */
-struct hwrm_cfa_eem_qcaps_input {
+/* hwrm_cfa_vfr_free_input (size:448b/56B) */
+struct hwrm_cfa_vfr_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36057,29 +38313,20 @@ struct hwrm_cfa_eem_qcaps_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /*
- * When set to 1, indicates the configuration will apply to TX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_rx bit can't be set.
- */
- #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_TX \
- UINT32_C(0x1)
+ /* VF Representor name (32 byte string). */
+ char vfr_name[32];
+ /* Logical VF number (range: 0 -> MAX_VFS -1). */
+ uint16_t vf_id;
/*
- * When set to 1, indicates the configuration will apply to RX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_tx bit can't be set.
+ * This field is reserved for the future use.
+ * It shall be set to 0.
*/
- #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_RX \
- UINT32_C(0x2)
- /* When set to 1, all offloaded flows will be sent to EEM. */
- #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
- UINT32_C(0x4)
- uint32_t unused_0;
+ uint16_t reserved;
+ uint8_t unused_0[4];
} __rte_packed;
-/* hwrm_cfa_eem_qcaps_output (size:320b/40B) */
-struct hwrm_cfa_eem_qcaps_output {
+/* hwrm_cfa_vfr_free_output (size:128b/16B) */
+struct hwrm_cfa_vfr_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36088,87 +38335,7 @@ struct hwrm_cfa_eem_qcaps_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /*
- * When set to 1, indicates the configuration will apply to TX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_rx bit can't be set.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX \
- UINT32_C(0x1)
- /*
- * When set to 1, indicates the configuration will apply to RX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_tx bit can't be set.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX \
- UINT32_C(0x2)
- /*
- * When set to 1, indicates the the FW supports the Centralized
- * Memory Model. The concept designates one entity for the
- * memory allocation while all others ‘subscribe’ to it.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
- UINT32_C(0x4)
- /*
- * When set to 1, indicates the the FW supports the Detached
- * Centralized Memory Model. The memory is allocated and managed
- * as a separate entity. All PFs and VFs will be granted direct
- * or semi-direct access to the allocated memory while none of
- * which can interfere with the management of the memory.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
- UINT32_C(0x8)
- uint32_t unused_0;
- uint32_t supported;
- /*
- * If set to 1, then EEM KEY0 table is supported using crc32 hash.
- * If set to 0, EEM KEY0 table is not supported.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \
- UINT32_C(0x1)
- /*
- * If set to 1, then EEM KEY1 table is supported using lookup3 hash.
- * If set to 0, EEM KEY1 table is not supported.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \
- UINT32_C(0x2)
- /*
- * If set to 1, then EEM External Record table is supported.
- * If set to 0, EEM External Record table is not supported.
- * (This table includes action record, EFC pointers, encap pointers)
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \
- UINT32_C(0x4)
- /*
- * If set to 1, then EEM External Flow Counters table is supported.
- * If set to 0, EEM External Flow Counters table is not supported.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
- UINT32_C(0x8)
- /*
- * If set to 1, then FID table used for implicit flow flush is supported.
- * If set to 0, then FID table used for implicit flow flush is not supported.
- */
- #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
- UINT32_C(0x10)
- /*
- * The maximum number of entries supported by EEM. When configuring the host memory
- * the number of numbers of entries that can supported are -
- * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries.
- * Any value that are not these values, the FW will round down to the closest support
- * number of entries.
- */
- uint32_t max_entries_supported;
- /* The entry size in bytes of each entry in the EEM KEY0/KEY1 tables. */
- uint16_t key_entry_size;
- /* The entry size in bytes of each entry in the EEM RECORD tables. */
- uint16_t record_entry_size;
- /* The entry size in bytes of each entry in the EEM EFC tables. */
- uint16_t efc_entry_size;
- /* The FID size in bytes of each entry in the EEM FID tables. */
- uint16_t fid_entry_size;
- uint8_t unused_1[7];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -36179,13 +38346,13 @@ struct hwrm_cfa_eem_qcaps_output {
uint8_t valid;
} __rte_packed;
-/********************
- * hwrm_cfa_eem_cfg *
- ********************/
+/***************************************
+ * hwrm_cfa_redirect_query_tunnel_type *
+ ***************************************/
-/* hwrm_cfa_eem_cfg_input (size:384b/48B) */
-struct hwrm_cfa_eem_cfg_input {
+/* hwrm_cfa_redirect_query_tunnel_type_input (size:192b/24B) */
+struct hwrm_cfa_redirect_query_tunnel_type_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36214,65 +38381,66 @@ struct hwrm_cfa_eem_cfg_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /*
- * When set to 1, indicates the configuration will apply to TX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_rx bit can't be set.
- */
- #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_TX \
+ /* The source function id. */
+ uint16_t src_fid;
+ uint8_t unused_0[6];
+} __rte_packed;
+
+/* hwrm_cfa_redirect_query_tunnel_type_output (size:128b/16B) */
+struct hwrm_cfa_redirect_query_tunnel_type_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Tunnel Mask. */
+ uint32_t tunnel_mask;
+ /* Non-tunnel */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NONTUNNEL \
UINT32_C(0x1)
- /*
- * When set to 1, indicates the configuration will apply to RX flows
- * which are to be offloaded.
- * Note if this bit is set then the path_tx bit can't be set.
- */
- #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_RX \
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN \
UINT32_C(0x2)
- /* When set to 1, all offloaded flows will be sent to EEM. */
- #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ /* Network Virtualization Generic Routing Encapsulation (NVGRE) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_NVGRE \
UINT32_C(0x4)
- /* When set to 1, secondary, 0 means primary. */
- #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_SECONDARY_PF \
+ /* Generic Routing Encapsulation (GRE) inside Ethernet payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2GRE \
UINT32_C(0x8)
- /*
- * Group_id which used by Firmware to identify memory pools belonging
- * to certain group.
- */
- uint16_t group_id;
- uint16_t unused_0;
- /*
- * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
- * RECORD, EFC all have the same number of entries and all tables will be configured
- * using this value. Current minimum value is 32k. Current maximum value is 128M.
- */
- uint32_t num_entries;
- uint32_t unused_1;
- /* Configured EEM with the given context if for KEY0 table. */
- uint16_t key0_ctx_id;
- /* Configured EEM with the given context if for KEY1 table. */
- uint16_t key1_ctx_id;
- /* Configured EEM with the given context if for RECORD table. */
- uint16_t record_ctx_id;
- /* Configured EEM with the given context if for EFC table. */
- uint16_t efc_ctx_id;
- /* Configured EEM with the given context if for EFC table. */
- uint16_t fid_ctx_id;
- uint16_t unused_2;
- uint32_t unused_3;
-} __rte_packed;
-
-/* hwrm_cfa_eem_cfg_output (size:128b/16B) */
-struct hwrm_cfa_eem_cfg_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- uint8_t unused_0[7];
+ /* IP in IP */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPIP \
+ UINT32_C(0x10)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_GENEVE \
+ UINT32_C(0x20)
+ /* Multi-Protocol Label Switching (MPLS) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_MPLS \
+ UINT32_C(0x40)
+ /* Stateless Transport Tunnel (STT) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_STT \
+ UINT32_C(0x80)
+ /* Generic Routing Encapsulation (GRE) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE \
+ UINT32_C(0x100)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_V4 \
+ UINT32_C(0x200)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_IPGRE_V1 \
+ UINT32_C(0x400)
+ /* Any tunneled traffic */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_ANYTUNNEL \
+ UINT32_C(0x800)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_L2_ETYPE \
+ UINT32_C(0x1000)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_CFA_REDIRECT_QUERY_TUNNEL_TYPE_OUTPUT_TUNNEL_MASK_VXLAN_GPE_V6 \
+ UINT32_C(0x2000)
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -36283,13 +38451,13 @@ struct hwrm_cfa_eem_cfg_output {
uint8_t valid;
} __rte_packed;
-/*********************
- * hwrm_cfa_eem_qcfg *
- *********************/
+/*************************
+ * hwrm_cfa_ctx_mem_rgtr *
+ *************************/
-/* hwrm_cfa_eem_qcfg_input (size:192b/24B) */
-struct hwrm_cfa_eem_qcfg_input {
+/* hwrm_cfa_ctx_mem_rgtr_input (size:256b/32B) */
+struct hwrm_cfa_ctx_mem_rgtr_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36318,16 +38486,44 @@ struct hwrm_cfa_eem_qcfg_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /* When set to 1, indicates the configuration is the TX flow. */
- #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
- /* When set to 1, indicates the configuration is the RX flow. */
- #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 256KB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 1MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 1GB page size. */
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_CTX_MEM_RGTR_INPUT_PAGE_SIZE_1G
uint32_t unused_0;
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
} __rte_packed;
-/* hwrm_cfa_eem_qcfg_output (size:256b/32B) */
-struct hwrm_cfa_eem_qcfg_output {
+/* hwrm_cfa_ctx_mem_rgtr_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_rgtr_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36336,29 +38532,12 @@ struct hwrm_cfa_eem_qcfg_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /* When set to 1, indicates the configuration is the TX flow. */
- #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_TX \
- UINT32_C(0x1)
- /* When set to 1, indicates the configuration is the RX flow. */
- #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_RX \
- UINT32_C(0x2)
- /* When set to 1, all offloaded flows will be sent to EEM. */
- #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \
- UINT32_C(0x4)
- /* The number of entries the FW has configured for EEM. */
- uint32_t num_entries;
- /* Configured EEM with the given context if for KEY0 table. */
- uint16_t key0_ctx_id;
- /* Configured EEM with the given context if for KEY1 table. */
- uint16_t key1_ctx_id;
- /* Configured EEM with the given context if for RECORD table. */
- uint16_t record_ctx_id;
- /* Configured EEM with the given context if for EFC table. */
- uint16_t efc_ctx_id;
- /* Configured EEM with the given context if for EFC table. */
- uint16_t fid_ctx_id;
- uint8_t unused_2[5];
+ /*
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
+ */
+ uint16_t ctx_id;
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -36369,13 +38548,13 @@ struct hwrm_cfa_eem_qcfg_output {
uint8_t valid;
} __rte_packed;
-/*******************
- * hwrm_cfa_eem_op *
- *******************/
+/***************************
+ * hwrm_cfa_ctx_mem_unrgtr *
+ ***************************/
-/* hwrm_cfa_eem_op_input (size:192b/24B) */
-struct hwrm_cfa_eem_op_input {
+/* hwrm_cfa_ctx_mem_unrgtr_input (size:192b/24B) */
+struct hwrm_cfa_ctx_mem_unrgtr_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36404,49 +38583,16 @@ struct hwrm_cfa_eem_op_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
- /*
- * When set to 1, indicates the host memory which is passed will be
- * used for the TX flow offload function specified in fid.
- * Note if this bit is set then the path_rx bit can't be set.
- */
- #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
- /*
- * When set to 1, indicates the host memory which is passed will be
- * used for the RX flow offload function specified in fid.
- * Note if this bit is set then the path_tx bit can't be set.
- */
- #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
- uint16_t unused_0;
- /* The number of EEM key table entries to be configured. */
- uint16_t op;
- /* This value is reserved and should not be used. */
- #define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
- /*
- * To properly stop EEM and ensure there are no DMA's, the caller
- * must disable EEM for the given PF, using this call. This will
- * safely disable EEM and ensure that all DMA'ed to the
- * keys/records/efc have been completed.
- */
- #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_DISABLE UINT32_C(0x1)
- /*
- * Once the EEM host memory has been configured, EEM options have
- * been configured. Then the caller should enable EEM for the given
- * PF. Note once this call has been made, then the EEM mechanism
- * will be active and DMA's will occur as packets are processed.
- */
- #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2)
/*
- * Clear EEM settings for the given PF so that the register values
- * are reset back to there initial state.
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
*/
- #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP UINT32_C(0x3)
- #define HWRM_CFA_EEM_OP_INPUT_OP_LAST \
- HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP
+ uint16_t ctx_id;
+ uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_cfa_eem_op_output (size:128b/16B) */
-struct hwrm_cfa_eem_op_output {
+/* hwrm_cfa_ctx_mem_unrgtr_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_unrgtr_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36466,13 +38612,13 @@ struct hwrm_cfa_eem_op_output {
uint8_t valid;
} __rte_packed;
-/********************************
- * hwrm_cfa_adv_flow_mgnt_qcaps *
- ********************************/
+/*************************
+ * hwrm_cfa_ctx_mem_qctx *
+ *************************/
-/* hwrm_cfa_adv_flow_mgnt_qcaps_input (size:256b/32B) */
-struct hwrm_cfa_adv_flow_mgnt_qcaps_input {
+/* hwrm_cfa_ctx_mem_qctx_input (size:192b/24B) */
+struct hwrm_cfa_ctx_mem_qctx_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36501,11 +38647,16 @@ struct hwrm_cfa_adv_flow_mgnt_qcaps_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t unused_0[4];
+ /*
+ * Id/Handle to the recently register context memory. This handle is passed
+ * to the CFA feature.
+ */
+ uint16_t ctx_id;
+ uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_cfa_adv_flow_mgnt_qcaps_output (size:128b/16B) */
-struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
+/* hwrm_cfa_ctx_mem_qctx_output (size:256b/32B) */
+struct hwrm_cfa_ctx_mem_qctx_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36514,114 +38665,41 @@ struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /*
- * Value of 1 to indicate firmware support 16-bit flow handle.
- * Value of 0 to indicate firmware not support 16-bit flow handle.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_16BIT_SUPPORTED \
- UINT32_C(0x1)
- /*
- * Value of 1 to indicate firmware support 64-bit flow handle.
- * Value of 0 to indicate firmware not support 64-bit flow handle.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_64BIT_SUPPORTED \
- UINT32_C(0x2)
- /*
- * Value of 1 to indicate firmware support flow batch delete operation through
- * HWRM_CFA_FLOW_FLUSH command.
- * Value of 0 to indicate that the firmware does not support flow batch delete
- * operation.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_BATCH_DELETE_SUPPORTED \
- UINT32_C(0x4)
- /*
- * Value of 1 to indicate that the firmware support flow reset all operation through
- * HWRM_CFA_FLOW_FLUSH command.
- * Value of 0 indicates firmware does not support flow reset all operation.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_RESET_ALL_SUPPORTED \
- UINT32_C(0x8)
- /*
- * Value of 1 to indicate that firmware supports use of FID as dest_id in
- * HWRM_CFA_NTUPLE_ALLOC/CFG commands.
- * Value of 0 indicates firmware does not support use of FID as dest_id.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \
- UINT32_C(0x10)
- /*
- * Value of 1 to indicate that firmware supports TX EEM flows.
- * Value of 0 indicates firmware does not support TX EEM flows.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_TX_EEM_FLOW_SUPPORTED \
- UINT32_C(0x20)
- /*
- * Value of 1 to indicate that firmware supports RX EEM flows.
- * Value of 0 indicates firmware does not support RX EEM flows.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \
- UINT32_C(0x40)
- /*
- * Value of 1 to indicate that firmware supports the dynamic allocation of an
- * on-chip flow counter which can be used for EEM flows.
- * Value of 0 indicates firmware does not support the dynamic allocation of an
- * on-chip flow counter.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_COUNTER_ALLOC_SUPPORTED \
- UINT32_C(0x80)
- /*
- * Value of 1 to indicate that firmware supports setting of
- * rfs_ring_tbl_idx in HWRM_CFA_NTUPLE_ALLOC command.
- * Value of 0 indicates firmware does not support rfs_ring_tbl_idx.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_SUPPORTED \
- UINT32_C(0x100)
- /*
- * Value of 1 to indicate that firmware supports untagged matching
- * criteria on HWRM_CFA_L2_FILTER_ALLOC command. Value of 0
- * indicates firmware does not support untagged matching.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_UNTAGGED_VLAN_SUPPORTED \
- UINT32_C(0x200)
- /*
- * Value of 1 to indicate that firmware supports XDP filter. Value
- * of 0 indicates firmware does not support XDP filter.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_XDP_SUPPORTED \
- UINT32_C(0x400)
- /*
- * Value of 1 to indicate that the firmware support L2 header source
- * fields matching criteria on HWRM_CFA_L2_FILTER_ALLOC command.
- * Value of 0 indicates firmware does not support L2 header source
- * fields matching.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_HEADER_SOURCE_FIELDS_SUPPORTED \
- UINT32_C(0x800)
- /*
- * If set to 1, firmware is capable of supporting ARP ethertype as
- * matching criteria for HWRM_CFA_NTUPLE_FILTER_ALLOC command on the
- * RX direction. By default, this flag should be 0 for older version
- * of firmware.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ARP_SUPPORTED \
- UINT32_C(0x1000)
- /*
- * Value of 1 to indicate that firmware supports setting of
- * rfs_ring_tbl_idx in dst_id field of the HWRM_CFA_NTUPLE_ALLOC
- * command. Value of 0 indicates firmware does not support
- * rfs_ring_tbl_idx in dst_id field.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_V2_SUPPORTED \
- UINT32_C(0x2000)
- /*
- * If set to 1, firmware is capable of supporting IPv4/IPv6 as
- * ethertype in HWRM_CFA_NTUPLE_FILTER_ALLOC command on the RX
- * direction. By default, this flag should be 0 for older version
- * of firmware.
- */
- #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ETHERTYPE_IP_SUPPORTED \
- UINT32_C(0x4000)
- uint8_t unused_0[3];
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
+ /* PBL pointer points to PDE table with each entry pointing to PTE tables. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LAST \
+ HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 256KB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 1MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 1GB page size. */
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_LAST \
+ HWRM_CFA_CTX_MEM_QCTX_OUTPUT_PAGE_SIZE_1G
+ uint8_t unused_0[4];
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -36632,13 +38710,13 @@ struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
uint8_t valid;
} __rte_packed;
-/******************
- * hwrm_cfa_tflib *
- ******************/
+/**************************
+ * hwrm_cfa_ctx_mem_qcaps *
+ **************************/
-/* hwrm_cfa_tflib_input (size:1024b/128B) */
-struct hwrm_cfa_tflib_input {
+/* hwrm_cfa_ctx_mem_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36667,18 +38745,10 @@ struct hwrm_cfa_tflib_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* TFLIB message type. */
- uint16_t tf_type;
- /* TFLIB message subtype. */
- uint16_t tf_subtype;
- /* unused. */
- uint8_t unused0[4];
- /* TFLIB request data. */
- uint32_t tf_req[26];
} __rte_packed;
-/* hwrm_cfa_tflib_output (size:5632b/704B) */
-struct hwrm_cfa_tflib_output {
+/* hwrm_cfa_ctx_mem_qcaps_output (size:128b/16B) */
+struct hwrm_cfa_ctx_mem_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36687,16 +38757,9 @@ struct hwrm_cfa_tflib_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* TFLIB message type. */
- uint16_t tf_type;
- /* TFLIB message subtype. */
- uint16_t tf_subtype;
- /* TFLIB response code */
- uint32_t tf_resp_code;
- /* TFLIB response data. */
- uint32_t tf_resp[170];
- /* unused. */
- uint8_t unused1[7];
+ /* Indicates the maximum number of context memory which can be registered. */
+ uint16_t max_entries;
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -36707,13 +38770,13 @@ struct hwrm_cfa_tflib_output {
uint8_t valid;
} __rte_packed;
-/***********
- * hwrm_tf *
- ***********/
+/**************************
+ * hwrm_cfa_counter_qcaps *
+ **************************/
-/* hwrm_tf_input (size:1024b/128B) */
-struct hwrm_tf_input {
+/* hwrm_cfa_counter_qcaps_input (size:128b/16B) */
+struct hwrm_cfa_counter_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36742,18 +38805,10 @@ struct hwrm_tf_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* TF message type. */
- uint16_t type;
- /* TF message subtype. */
- uint16_t subtype;
- /* unused. */
- uint8_t unused0[4];
- /* TF request data. */
- uint32_t req[26];
} __rte_packed;
-/* hwrm_tf_output (size:5632b/704B) */
-struct hwrm_tf_output {
+/* hwrm_cfa_counter_qcaps_output (size:576b/72B) */
+struct hwrm_cfa_counter_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36762,34 +38817,63 @@ struct hwrm_tf_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* TF message type. */
- uint16_t type;
- /* TF message subtype. */
- uint16_t subtype;
- /* TF response code */
- uint32_t resp_code;
- /* TF response data. */
- uint32_t resp[170];
- /* unused. */
- uint8_t unused1[7];
+ uint32_t flags;
+ /* Enumeration denoting the supported CFA counter format. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT \
+ UINT32_C(0x1)
+ /* CFA counter types are not supported. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_NONE \
+ UINT32_C(0x0)
+ /* 64-bit packet counters followed by 64-bit byte counters format. */
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT \
+ UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_LAST \
+ HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT
+ uint32_t unused_0;
+ /* Minimum guaranteed number of flow counters supported for this function, in RX direction. */
+ uint32_t min_rx_fc;
+ /* Maximum non-guaranteed number of flow counters supported for this function, in RX direction. */
+ uint32_t max_rx_fc;
+ /* Minimum guaranteed number of flow counters supported for this function, in TX direction. */
+ uint32_t min_tx_fc;
+ /* Maximum non-guaranteed number of flow counters supported for this function, in TX direction. */
+ uint32_t max_tx_fc;
+ /* Minimum guaranteed number of extension flow counters supported for this function, in RX direction. */
+ uint32_t min_rx_efc;
+ /* Maximum non-guaranteed number of extension flow counters supported for this function, in RX direction. */
+ uint32_t max_rx_efc;
+ /* Minimum guaranteed number of extension flow counters supported for this function, in TX direction. */
+ uint32_t min_tx_efc;
+ /* Maximum non-guaranteed number of extension flow counters supported for this function, in TX direction. */
+ uint32_t max_tx_efc;
+ /* Minimum guaranteed number of meter drop counters supported for this function, in RX direction. */
+ uint32_t min_rx_mdc;
+ /* Maximum non-guaranteed number of meter drop counters supported for this function, in RX direction. */
+ uint32_t max_rx_mdc;
+ /* Minimum guaranteed number of meter drop counters supported for this function, in TX direction. */
+ uint32_t min_tx_mdc;
+ /* Maximum non-guaranteed number of meter drop counters supported for this function, in TX direction. */
+ uint32_t max_tx_mdc;
+ /* Maximum guaranteed number of flow counters which can be used during flow alloc. */
+ uint32_t max_flow_alloc_fc;
+ uint8_t unused_1[3];
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been
- * completely written. When writing a command completion or
- * response to an internal processor, the order of writes has
- * to be such that this field is written last.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/***********************
- * hwrm_tf_version_get *
- ***********************/
+/************************
+ * hwrm_cfa_counter_cfg *
+ ************************/
-/* hwrm_tf_version_get_input (size:128b/16B) */
-struct hwrm_tf_version_get_input {
+/* hwrm_cfa_counter_cfg_input (size:256b/32B) */
+struct hwrm_cfa_counter_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36818,44 +38902,90 @@ struct hwrm_tf_version_get_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __rte_packed;
-
-/* hwrm_tf_version_get_output (size:128b/16B) */
-struct hwrm_tf_version_get_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
+ uint16_t flags;
+ /* Enumeration denoting the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE \
+ UINT32_C(0x1)
+ /* Disable the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_DISABLE \
+ UINT32_C(0x0)
+ /* Enable the configuration mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE \
+ UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH \
+ UINT32_C(0x2)
+ /* Tx path. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_TX \
+ (UINT32_C(0x0) << 1)
+ /* Rx path. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX \
+ (UINT32_C(0x1) << 1)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX
+ /* Enumeration denoting the data transfer mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_MASK \
+ UINT32_C(0xc)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_SFT 2
+ /* Push mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PUSH \
+ (UINT32_C(0x0) << 2)
+ /* Pull mode. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL \
+ (UINT32_C(0x1) << 2)
+ /* Pull on async update. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC \
+ (UINT32_C(0x2) << 2)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC
+ uint16_t counter_type;
+ /* Flow counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_FC UINT32_C(0x0)
+ /* Extended flow counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_EFC UINT32_C(0x1)
+ /* Meter drop counters. */
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC UINT32_C(0x2)
+ #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_LAST \
+ HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC
+ /* Ctx memory handle to be used for the counter. */
+ uint16_t ctx_id;
+ /* Counter update cadence hint (only in Push mode). */
+ uint16_t update_tmr_ms;
+ /* Total number of entries. */
+ uint32_t num_entries;
+ uint32_t unused_0;
+} __rte_packed;
+
+/* hwrm_cfa_counter_cfg_output (size:128b/16B) */
+struct hwrm_cfa_counter_cfg_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Version Major number. */
- uint8_t major;
- /* Version Minor number. */
- uint8_t minor;
- /* Version Update number. */
- uint8_t update;
- /* unused. */
- uint8_t unused0[4];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field is
- * written last.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/************************
- * hwrm_tf_session_open *
- ************************/
+/***************************
+ * hwrm_cfa_counter_qstats *
+ ***************************/
-/* hwrm_tf_session_open_input (size:640b/80B) */
-struct hwrm_tf_session_open_input {
+/* hwrm_cfa_counter_qstats_input (size:320b/40B) */
+struct hwrm_cfa_counter_qstats_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36884,12 +39014,27 @@ struct hwrm_tf_session_open_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Name of the session. */
- uint8_t session_name[64];
+ uint16_t flags;
+ /* Enumeration denoting the RX, TX type of the resource. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH UINT32_C(0x1)
+ /* Tx path. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
+ /* Rx path. */
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
+ #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_LAST \
+ HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX
+ uint16_t counter_type;
+ uint16_t input_flow_ctx_id;
+ uint16_t num_entries;
+ uint16_t delta_time_ms;
+ uint16_t meter_instance_id;
+ uint16_t mdc_ctx_id;
+ uint8_t unused_0[2];
+ uint64_t expected_count;
} __rte_packed;
-/* hwrm_tf_session_open_output (size:192b/24B) */
-struct hwrm_tf_session_open_output {
+/* hwrm_cfa_counter_qstats_output (size:128b/16B) */
+struct hwrm_cfa_counter_qstats_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36898,38 +39043,24 @@ struct hwrm_tf_session_open_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * Unique session identifier for the session created by the
- * firmware.
- */
- uint32_t fw_session_id;
- /*
- * Unique session client identifier for the first client on
- * the newly created session.
- */
- uint32_t fw_session_client_id;
- /* unused. */
- uint32_t unused0;
- /* unused. */
- uint8_t unused1[3];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field is
- * written last.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/**************************
- * hwrm_tf_session_attach *
- **************************/
+/**********************
+ * hwrm_cfa_eem_qcaps *
+ **********************/
-/* hwrm_tf_session_attach_input (size:704b/88B) */
-struct hwrm_tf_session_attach_input {
+/* hwrm_cfa_eem_qcaps_input (size:192b/24B) */
+struct hwrm_cfa_eem_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -36958,25 +39089,29 @@ struct hwrm_tf_session_attach_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ uint32_t flags;
/*
- * Unique session identifier for the session that the attach
- * request want to attach to. This value originates from the
- * shared session memory that the attach request opened by
- * way of the 'attach name' that was passed in to the core
- * attach API.
- * The fw_session_id of the attach session includes PCIe bus
- * info to distinguish the PF and session info to identify
- * the associated TruFlow session.
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
*/
- uint32_t attach_fw_session_id;
- /* unused. */
- uint32_t unused0;
- /* Name of the session it self. */
- uint8_t session_name[64];
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x4)
+ uint32_t unused_0;
} __rte_packed;
-/* hwrm_tf_session_attach_output (size:128b/16B) */
-struct hwrm_tf_session_attach_output {
+/* hwrm_cfa_eem_qcaps_output (size:320b/40B) */
+struct hwrm_cfa_eem_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -36985,34 +39120,104 @@ struct hwrm_tf_session_attach_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ uint32_t flags;
/*
- * Unique session identifier for the session created by the
- * firmware. It includes PCIe bus info to distinguish the PF
- * and session info to identify the associated TruFlow
- * session. This fw_session_id is unique to the attach
- * request.
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
*/
- uint32_t fw_session_id;
- /* unused. */
- uint8_t unused0[3];
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /*
+ * When set to 1, indicates the the FW supports the Centralized
+ * Memory Model. The concept designates one entity for the
+ * memory allocation while all others ‘subscribe’ to it.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ UINT32_C(0x4)
+ /*
+ * When set to 1, indicates the the FW supports the Detached
+ * Centralized Memory Model. The memory is allocated and managed
+ * as a separate entity. All PFs and VFs will be granted direct
+ * or semi-direct access to the allocated memory while none of
+ * which can interfere with the management of the memory.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ UINT32_C(0x8)
+ uint32_t unused_0;
+ uint32_t supported;
+ /*
+ * If set to 1, then EEM KEY0 table is supported using crc32 hash.
+ * If set to 0, EEM KEY0 table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, then EEM KEY1 table is supported using lookup3 hash.
+ * If set to 0, EEM KEY1 table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then EEM External Record table is supported.
+ * If set to 0, EEM External Record table is not supported.
+ * (This table includes action record, EFC pointers, encap pointers)
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, then EEM External Flow Counters table is supported.
+ * If set to 0, EEM External Flow Counters table is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, then FID table used for implicit flow flush is supported.
+ * If set to 0, then FID table used for implicit flow flush is not supported.
+ */
+ #define HWRM_CFA_EEM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
+ UINT32_C(0x10)
+ /*
+ * The maximum number of entries supported by EEM. When configuring the host memory
+ * the number of numbers of entries that can supported are -
+ * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M, 128M entries.
+ * Any value that are not these values, the FW will round down to the closest support
+ * number of entries.
+ */
+ uint32_t max_entries_supported;
+ /* The entry size in bytes of each entry in the EEM KEY0/KEY1 tables. */
+ uint16_t key_entry_size;
+ /* The entry size in bytes of each entry in the EEM RECORD tables. */
+ uint16_t record_entry_size;
+ /* The entry size in bytes of each entry in the EEM EFC tables. */
+ uint16_t efc_entry_size;
+ /* The FID size in bytes of each entry in the EEM FID tables. */
+ uint16_t fid_entry_size;
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field is
- * written last.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/****************************
- * hwrm_tf_session_register *
- ****************************/
+/********************
+ * hwrm_cfa_eem_cfg *
+ ********************/
-/* hwrm_tf_session_register_input (size:704b/88B) */
-struct hwrm_tf_session_register_input {
+/* hwrm_cfa_eem_cfg_input (size:384b/48B) */
+struct hwrm_cfa_eem_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37041,23 +39246,56 @@ struct hwrm_tf_session_register_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ uint32_t flags;
/*
- * Unique session identifier for the session that the
- * register request want to create a new client on. This
- * value originates from the first open request.
- * The fw_session_id of the attach session includes PCIe bus
- * info to distinguish the PF and session info to identify
- * the associated TruFlow session.
+ * When set to 1, indicates the configuration will apply to TX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_rx bit can't be set.
*/
- uint32_t fw_session_id;
- /* unused. */
- uint32_t unused0;
- /* Name of the session client. */
- uint8_t session_client_name[64];
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the configuration will apply to RX flows
+ * which are to be offloaded.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x4)
+ /* When set to 1, secondary, 0 means primary. */
+ #define HWRM_CFA_EEM_CFG_INPUT_FLAGS_SECONDARY_PF \
+ UINT32_C(0x8)
+ /*
+ * Group_id which used by Firmware to identify memory pools belonging
+ * to certain group.
+ */
+ uint16_t group_id;
+ uint16_t unused_0;
+ /*
+ * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
+ * RECORD, EFC all have the same number of entries and all tables will be configured
+ * using this value. Current minimum value is 32k. Current maximum value is 128M.
+ */
+ uint32_t num_entries;
+ uint32_t unused_1;
+ /* Configured EEM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EEM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EEM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t fid_ctx_id;
+ uint16_t unused_2;
+ uint32_t unused_3;
} __rte_packed;
-/* hwrm_tf_session_register_output (size:128b/16B) */
-struct hwrm_tf_session_register_output {
+/* hwrm_cfa_eem_cfg_output (size:128b/16B) */
+struct hwrm_cfa_eem_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37066,32 +39304,24 @@ struct hwrm_tf_session_register_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * Unique session client identifier for the session created
- * by the firmware. It includes the session the client it
- * attached to and session client info.
- */
- uint32_t fw_session_client_id;
- /* unused. */
- uint8_t unused0[3];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field is
- * written last.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/******************************
- * hwrm_tf_session_unregister *
- ******************************/
+/*********************
+ * hwrm_cfa_eem_qcfg *
+ *********************/
-/* hwrm_tf_session_unregister_input (size:192b/24B) */
-struct hwrm_tf_session_unregister_input {
+/* hwrm_cfa_eem_qcfg_input (size:192b/24B) */
+struct hwrm_cfa_eem_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37120,20 +39350,16 @@ struct hwrm_tf_session_unregister_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * Unique session identifier for the session that the
- * unregister request want to close a session client on.
- */
- uint32_t fw_session_id;
- /*
- * Unique session client identifier for the session that the
- * unregister request want to close.
- */
- uint32_t fw_session_client_id;
+ uint32_t flags;
+ /* When set to 1, indicates the configuration is the TX flow. */
+ #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ /* When set to 1, indicates the configuration is the RX flow. */
+ #define HWRM_CFA_EEM_QCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ uint32_t unused_0;
} __rte_packed;
-/* hwrm_tf_session_unregister_output (size:128b/16B) */
-struct hwrm_tf_session_unregister_output {
+/* hwrm_cfa_eem_qcfg_output (size:256b/32B) */
+struct hwrm_cfa_eem_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37142,26 +39368,46 @@ struct hwrm_tf_session_unregister_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* unused. */
- uint8_t unused0[7];
+ uint32_t flags;
+ /* When set to 1, indicates the configuration is the TX flow. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_TX \
+ UINT32_C(0x1)
+ /* When set to 1, indicates the configuration is the RX flow. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PATH_RX \
+ UINT32_C(0x2)
+ /* When set to 1, all offloaded flows will be sent to EEM. */
+ #define HWRM_CFA_EEM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x4)
+ /* The number of entries the FW has configured for EEM. */
+ uint32_t num_entries;
+ /* Configured EEM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EEM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EEM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+ /* Configured EEM with the given context if for EFC table. */
+ uint16_t fid_ctx_id;
+ uint8_t unused_2[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field is
- * written last.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/*************************
- * hwrm_tf_session_close *
- *************************/
+/*******************
+ * hwrm_cfa_eem_op *
+ *******************/
-/* hwrm_tf_session_close_input (size:192b/24B) */
-struct hwrm_tf_session_close_input {
+/* hwrm_cfa_eem_op_input (size:192b/24B) */
+struct hwrm_cfa_eem_op_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37190,14 +39436,49 @@ struct hwrm_tf_session_close_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* unused. */
- uint8_t unused0[4];
+ uint32_t flags;
+ /*
+ * When set to 1, indicates the host memory which is passed will be
+ * used for the TX flow offload function specified in fid.
+ * Note if this bit is set then the path_rx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_TX UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the host memory which is passed will be
+ * used for the RX flow offload function specified in fid.
+ * Note if this bit is set then the path_tx bit can't be set.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_FLAGS_PATH_RX UINT32_C(0x2)
+ uint16_t unused_0;
+ /* The number of EEM key table entries to be configured. */
+ uint16_t op;
+ /* This value is reserved and should not be used. */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
+ /*
+ * To properly stop EEM and ensure there are no DMA's, the caller
+ * must disable EEM for the given PF, using this call. This will
+ * safely disable EEM and ensure that all DMA'ed to the
+ * keys/records/efc have been completed.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_DISABLE UINT32_C(0x1)
+ /*
+ * Once the EEM host memory has been configured, EEM options have
+ * been configured. Then the caller should enable EEM for the given
+ * PF. Note once this call has been made, then the EEM mechanism
+ * will be active and DMA's will occur as packets are processed.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_ENABLE UINT32_C(0x2)
+ /*
+ * Clear EEM settings for the given PF so that the register values
+ * are reset back to there initial state.
+ */
+ #define HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP UINT32_C(0x3)
+ #define HWRM_CFA_EEM_OP_INPUT_OP_LAST \
+ HWRM_CFA_EEM_OP_INPUT_OP_EEM_CLEANUP
} __rte_packed;
-/* hwrm_tf_session_close_output (size:128b/16B) */
-struct hwrm_tf_session_close_output {
+/* hwrm_cfa_eem_op_output (size:128b/16B) */
+struct hwrm_cfa_eem_op_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37206,26 +39487,24 @@ struct hwrm_tf_session_close_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* unused. */
- uint8_t unused0[7];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field
- * is written last.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/************************
- * hwrm_tf_session_qcfg *
- ************************/
+/********************************
+ * hwrm_cfa_adv_flow_mgnt_qcaps *
+ ********************************/
-/* hwrm_tf_session_qcfg_input (size:192b/24B) */
-struct hwrm_tf_session_qcfg_input {
+/* hwrm_cfa_adv_flow_mgnt_qcaps_input (size:256b/32B) */
+struct hwrm_cfa_adv_flow_mgnt_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37254,14 +39533,11 @@ struct hwrm_tf_session_qcfg_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* unused. */
- uint8_t unused0[4];
+ uint32_t unused_0[4];
} __rte_packed;
-/* hwrm_tf_session_qcfg_output (size:128b/16B) */
-struct hwrm_tf_session_qcfg_output {
+/* hwrm_cfa_adv_flow_mgnt_qcaps_output (size:128b/16B) */
+struct hwrm_cfa_adv_flow_mgnt_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37270,74 +39546,131 @@ struct hwrm_tf_session_qcfg_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* RX action control settings flags. */
- uint8_t rx_act_flags;
+ uint32_t flags;
/*
- * A value of 1 in this field indicates that Global Flow ID
- * reporting into cfa_code and cfa_metadata is enabled.
+ * Value of 1 to indicate firmware support 16-bit flow handle.
+ * Value of 0 to indicate firmware not support 16-bit flow handle.
*/
- #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_ABCR_GFID_EN \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_16BIT_SUPPORTED \
UINT32_C(0x1)
/*
- * A value of 1 in this field indicates that both inner and outer
- * are stripped and inner tag is passed.
- * Enabled.
+ * Value of 1 to indicate firmware support 64-bit flow handle.
+ * Value of 0 to indicate firmware not support 64-bit flow handle.
*/
- #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_ABCR_VTAG_DLT_BOTH \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_HND_64BIT_SUPPORTED \
UINT32_C(0x2)
/*
- * A value of 1 in this field indicates that the re-use of
- * existing tunnel L2 header SMAC is enabled for
- * Non-tunnel L2, L2-L3 and IP-IP tunnel.
+ * Value of 1 to indicate firmware support flow batch delete operation through
+ * HWRM_CFA_FLOW_FLUSH command.
+ * Value of 0 to indicate that the firmware does not support flow batch delete
+ * operation.
*/
- #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_TECT_SMAC_OVR_RUTNSL2 \
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_BATCH_DELETE_SUPPORTED \
UINT32_C(0x4)
- /* TX Action control settings flags. */
- uint8_t tx_act_flags;
- /* Disabled. */
- #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_ABCR_VEB_EN \
- UINT32_C(0x1)
/*
- * When set to 1 any GRE tunnels will include the
- * optional Key field.
+ * Value of 1 to indicate that the firmware support flow reset all operation through
+ * HWRM_CFA_FLOW_FLUSH command.
+ * Value of 0 indicates firmware does not support flow reset all operation.
*/
- #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_GRE_SET_K \
- UINT32_C(0x2)
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_RESET_ALL_SUPPORTED \
+ UINT32_C(0x8)
/*
- * When set to 1, for GRE tunnels, the IPV6 Traffic Class (TC)
- * field of the outer header is inherited from the inner header
- * (if present) or the fixed value as taken from the encap
- * record.
+ * Value of 1 to indicate that firmware supports use of FID as dest_id in
+ * HWRM_CFA_NTUPLE_ALLOC/CFG commands.
+ * Value of 0 indicates firmware does not support use of FID as dest_id.
*/
- #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_IPV6_TC_IH \
- UINT32_C(0x4)
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \
+ UINT32_C(0x10)
/*
- * When set to 1, for GRE tunnels, the IPV4 Type Of Service (TOS)
- * field of the outer header is inherited from the inner header
- * (if present) or the fixed value as taken from the encap record.
+ * Value of 1 to indicate that firmware supports TX EEM flows.
+ * Value of 0 indicates firmware does not support TX EEM flows.
*/
- #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_IPV4_TOS_IH \
- UINT32_C(0x8)
- /* unused. */
- uint8_t unused0[5];
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_TX_EEM_FLOW_SUPPORTED \
+ UINT32_C(0x20)
+ /*
+ * Value of 1 to indicate that firmware supports RX EEM flows.
+ * Value of 0 indicates firmware does not support RX EEM flows.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RX_EEM_FLOW_SUPPORTED \
+ UINT32_C(0x40)
+ /*
+ * Value of 1 to indicate that firmware supports the dynamic allocation of an
+ * on-chip flow counter which can be used for EEM flows.
+ * Value of 0 indicates firmware does not support the dynamic allocation of an
+ * on-chip flow counter.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_FLOW_COUNTER_ALLOC_SUPPORTED \
+ UINT32_C(0x80)
+ /*
+ * Value of 1 to indicate that firmware supports setting of
+ * rfs_ring_tbl_idx in HWRM_CFA_NTUPLE_ALLOC command.
+ * Value of 0 indicates firmware does not support rfs_ring_tbl_idx.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_SUPPORTED \
+ UINT32_C(0x100)
+ /*
+ * Value of 1 to indicate that firmware supports untagged matching
+ * criteria on HWRM_CFA_L2_FILTER_ALLOC command. Value of 0
+ * indicates firmware does not support untagged matching.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_UNTAGGED_VLAN_SUPPORTED \
+ UINT32_C(0x200)
+ /*
+ * Value of 1 to indicate that firmware supports XDP filter. Value
+ * of 0 indicates firmware does not support XDP filter.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_XDP_SUPPORTED \
+ UINT32_C(0x400)
+ /*
+ * Value of 1 to indicate that the firmware support L2 header source
+ * fields matching criteria on HWRM_CFA_L2_FILTER_ALLOC command.
+ * Value of 0 indicates firmware does not support L2 header source
+ * fields matching.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_L2_HEADER_SOURCE_FIELDS_SUPPORTED \
+ UINT32_C(0x800)
+ /*
+ * If set to 1, firmware is capable of supporting ARP ethertype as
+ * matching criteria for HWRM_CFA_NTUPLE_FILTER_ALLOC command on the
+ * RX direction. By default, this flag should be 0 for older version
+ * of firmware.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ARP_SUPPORTED \
+ UINT32_C(0x1000)
+ /*
+ * Value of 1 to indicate that firmware supports setting of
+ * rfs_ring_tbl_idx in dst_id field of the HWRM_CFA_NTUPLE_ALLOC
+ * command. Value of 0 indicates firmware does not support
+ * rfs_ring_tbl_idx in dst_id field.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_RFS_RING_TBL_IDX_V2_SUPPORTED \
+ UINT32_C(0x2000)
+ /*
+ * If set to 1, firmware is capable of supporting IPv4/IPv6 as
+ * ethertype in HWRM_CFA_NTUPLE_FILTER_ALLOC command on the RX
+ * direction. By default, this flag should be 0 for older version
+ * of firmware.
+ */
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_RX_ETHERTYPE_IP_SUPPORTED \
+ UINT32_C(0x4000)
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field
- * is written last.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/******************************
- * hwrm_tf_session_resc_qcaps *
- ******************************/
+/******************
+ * hwrm_cfa_tflib *
+ ******************/
-/* hwrm_tf_session_resc_qcaps_input (size:256b/32B) */
-struct hwrm_tf_session_resc_qcaps_input {
+/* hwrm_cfa_tflib_input (size:1024b/128B) */
+struct hwrm_cfa_tflib_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37366,36 +39699,18 @@ struct hwrm_tf_session_resc_qcaps_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* Control flags. */
- uint16_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_TX
- /*
- * Defines the size of the provided qcaps_addr array
- * buffer. The size should be set to the Resource Manager
- * provided max number of qcaps entries which is device
- * specific. Resource Manager gets the max size from HCAPI
- * RM.
- */
- uint16_t qcaps_size;
- /*
- * This is the DMA address for the qcaps output data array
- * buffer. Array is of tf_rm_resc_req_entry type and is
- * device specific.
- */
- uint64_t qcaps_addr;
+ /* TFLIB message type. */
+ uint16_t tf_type;
+ /* TFLIB message subtype. */
+ uint16_t tf_subtype;
+ /* unused. */
+ uint8_t unused0[4];
+ /* TFLIB request data. */
+ uint32_t tf_req[26];
} __rte_packed;
-/* hwrm_tf_session_resc_qcaps_output (size:192b/24B) */
-struct hwrm_tf_session_resc_qcaps_output {
+/* hwrm_cfa_tflib_output (size:5632b/704B) */
+struct hwrm_cfa_tflib_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37404,55 +39719,33 @@ struct hwrm_tf_session_resc_qcaps_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Control flags. */
- uint32_t flags;
- /* Session reservation strategy. */
- #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_MASK \
- UINT32_C(0x3)
- #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_SFT \
- 0
- /* Static partitioning. */
- #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_STATIC \
- UINT32_C(0x0)
- /* Strategy 1. */
- #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_1 \
- UINT32_C(0x1)
- /* Strategy 2. */
- #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_2 \
- UINT32_C(0x2)
- /* Strategy 3. */
- #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_3 \
- UINT32_C(0x3)
- #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_LAST \
- HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_3
- /*
- * Size of the returned qcaps_addr data array buffer. The
- * value cannot exceed the size defined by the input msg,
- * qcaps_size.
- */
- uint16_t size;
- /* unused. */
- uint16_t unused0;
+ /* TFLIB message type. */
+ uint16_t tf_type;
+ /* TFLIB message subtype. */
+ uint16_t tf_subtype;
+ /* TFLIB response code */
+ uint32_t tf_resp_code;
+ /* TFLIB response data. */
+ uint32_t tf_resp[170];
/* unused. */
uint8_t unused1[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field is
- * written last.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/******************************
- * hwrm_tf_session_resc_alloc *
- ******************************/
+/***********
+ * hwrm_tf *
+ ***********/
-/* hwrm_tf_session_resc_alloc_input (size:320b/40B) */
-struct hwrm_tf_session_resc_alloc_input {
+/* hwrm_tf_input (size:1024b/128B) */
+struct hwrm_tf_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37481,42 +39774,18 @@ struct hwrm_tf_session_resc_alloc_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* Control flags. */
- uint16_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_TX
- /*
- * Defines the array size of the provided req_addr and
- * resv_addr array buffers. Should be set to the number of
- * request entries.
- */
- uint16_t req_size;
- /*
- * This is the DMA address for the request input data array
- * buffer. Array is of tf_rm_resc_req_entry type. Size of the
- * array buffer is provided by the 'req_size' field in this
- * message.
- */
- uint64_t req_addr;
- /*
- * This is the DMA address for the resc output data array
- * buffer. Array is of tf_rm_resc_entry type. Size of the array
- * buffer is provided by the 'req_size' field in this
- * message.
- */
- uint64_t resc_addr;
+ /* TF message type. */
+ uint16_t type;
+ /* TF message subtype. */
+ uint16_t subtype;
+ /* unused. */
+ uint8_t unused0[4];
+ /* TF request data. */
+ uint32_t req[26];
} __rte_packed;
-/* hwrm_tf_session_resc_alloc_output (size:128b/16B) */
-struct hwrm_tf_session_resc_alloc_output {
+/* hwrm_tf_output (size:5632b/704B) */
+struct hwrm_tf_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37525,33 +39794,34 @@ struct hwrm_tf_session_resc_alloc_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * Size of the returned tf_rm_resc_entry data array. The value
- * cannot exceed the req_size defined by the input msg. The data
- * array is returned using the resv_addr specified DMA
- * address also provided by the input msg.
- */
- uint16_t size;
+ /* TF message type. */
+ uint16_t type;
+ /* TF message subtype. */
+ uint16_t subtype;
+ /* TF response code */
+ uint32_t resp_code;
+ /* TF response data. */
+ uint32_t resp[170];
/* unused. */
- uint8_t unused0[5];
+ uint8_t unused1[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field is
- * written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/*****************************
- * hwrm_tf_session_resc_free *
- *****************************/
+/***********************
+ * hwrm_tf_version_get *
+ ***********************/
-/* hwrm_tf_session_resc_free_input (size:256b/32B) */
-struct hwrm_tf_session_resc_free_input {
+/* hwrm_tf_version_get_input (size:128b/16B) */
+struct hwrm_tf_version_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37580,34 +39850,10 @@ struct hwrm_tf_session_resc_free_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* Control flags. */
- uint16_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_TX
- /*
- * Defines the size, in bytes, of the provided free_addr
- * buffer.
- */
- uint16_t free_size;
- /*
- * This is the DMA address for the free input data array
- * buffer. Array is of tf_rm_resc_entry type. Size of the
- * buffer is provided by the 'free_size' field of this
- * message.
- */
- uint64_t free_addr;
} __rte_packed;
-/* hwrm_tf_session_resc_free_output (size:128b/16B) */
-struct hwrm_tf_session_resc_free_output {
+/* hwrm_tf_version_get_output (size:128b/16B) */
+struct hwrm_tf_version_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37616,8 +39862,14 @@ struct hwrm_tf_session_resc_free_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* Version Major number. */
+ uint8_t major;
+ /* Version Minor number. */
+ uint8_t minor;
+ /* Version Update number. */
+ uint8_t update;
/* unused. */
- uint8_t unused0[7];
+ uint8_t unused0[4];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -37629,13 +39881,13 @@ struct hwrm_tf_session_resc_free_output {
uint8_t valid;
} __rte_packed;
-/******************************
- * hwrm_tf_session_resc_flush *
- ******************************/
+/************************
+ * hwrm_tf_session_open *
+ ************************/
-/* hwrm_tf_session_resc_flush_input (size:256b/32B) */
-struct hwrm_tf_session_resc_flush_input {
+/* hwrm_tf_session_open_input (size:640b/80B) */
+struct hwrm_tf_session_open_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37664,34 +39916,12 @@ struct hwrm_tf_session_resc_flush_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* Control flags. */
- uint16_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_TX
- /*
- * Defines the size, in bytes, of the provided flush_addr
- * buffer.
- */
- uint16_t flush_size;
- /*
- * This is the DMA address for the flush input data array
- * buffer. Array of tf_rm_resc_entry type. Size of the
- * buffer is provided by the 'flush_size' field in this
- * message.
- */
- uint64_t flush_addr;
+ /* Name of the session. */
+ uint8_t session_name[64];
} __rte_packed;
-/* hwrm_tf_session_resc_flush_output (size:128b/16B) */
-struct hwrm_tf_session_resc_flush_output {
+/* hwrm_tf_session_open_output (size:192b/24B) */
+struct hwrm_tf_session_open_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37700,8 +39930,20 @@ struct hwrm_tf_session_resc_flush_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /*
+ * Unique session identifier for the session created by the
+ * firmware.
+ */
+ uint32_t fw_session_id;
+ /*
+ * Unique session client identifier for the first client on
+ * the newly created session.
+ */
+ uint32_t fw_session_client_id;
/* unused. */
- uint8_t unused0[7];
+ uint32_t unused0;
+ /* unused. */
+ uint8_t unused1[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -37713,35 +39955,13 @@ struct hwrm_tf_session_resc_flush_output {
uint8_t valid;
} __rte_packed;
-/* TruFlow RM capability of a resource. */
-/* tf_rm_resc_req_entry (size:64b/8B) */
-struct tf_rm_resc_req_entry {
- /* Type of the resource, defined globally in HCAPI RM. */
- uint32_t type;
- /* Minimum value. */
- uint16_t min;
- /* Maximum value. */
- uint16_t max;
-} __rte_packed;
-
-/* TruFlow RM reservation information. */
-/* tf_rm_resc_entry (size:64b/8B) */
-struct tf_rm_resc_entry {
- /* Type of the resource, defined globally in HCAPI RM. */
- uint32_t type;
- /* Start offset. */
- uint16_t start;
- /* Number of resources. */
- uint16_t stride;
-} __rte_packed;
-
-/************************
- * hwrm_tf_tbl_type_get *
- ************************/
+/**************************
+ * hwrm_tf_session_attach *
+ **************************/
-/* hwrm_tf_tbl_type_get_input (size:256b/32B) */
-struct hwrm_tf_tbl_type_get_input {
+/* hwrm_tf_session_attach_input (size:704b/88B) */
+struct hwrm_tf_session_attach_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37770,31 +39990,25 @@ struct hwrm_tf_tbl_type_get_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* Control flags. */
- uint16_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_TX
- /* unused. */
- uint8_t unused0[2];
/*
- * Type of the resource, defined globally in the
- * hwrm_tf_resc_type enum.
+ * Unique session identifier for the session that the attach
+ * request want to attach to. This value originates from the
+ * shared session memory that the attach request opened by
+ * way of the 'attach name' that was passed in to the core
+ * attach API.
+ * The fw_session_id of the attach session includes PCIe bus
+ * info to distinguish the PF and session info to identify
+ * the associated TruFlow session.
*/
- uint32_t type;
- /* Index of the type to retrieve. */
- uint32_t index;
+ uint32_t attach_fw_session_id;
+ /* unused. */
+ uint32_t unused0;
+ /* Name of the session it self. */
+ uint8_t session_name[64];
} __rte_packed;
-/* hwrm_tf_tbl_type_get_output (size:1216b/152B) */
-struct hwrm_tf_tbl_type_get_output {
+/* hwrm_tf_session_attach_output (size:128b/16B) */
+struct hwrm_tf_session_attach_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37803,34 +40017,34 @@ struct hwrm_tf_tbl_type_get_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Response code. */
- uint32_t resp_code;
- /* Response size. */
- uint16_t size;
- /* unused */
- uint16_t unused0;
- /* Response data. */
- uint8_t data[128];
- /* unused */
- uint8_t unused1[7];
+ /*
+ * Unique session identifier for the session created by the
+ * firmware. It includes PCIe bus info to distinguish the PF
+ * and session info to identify the associated TruFlow
+ * session. This fw_session_id is unique to the attach
+ * request.
+ */
+ uint32_t fw_session_id;
+ /* unused. */
+ uint8_t unused0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field
- * is written last.
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-/************************
- * hwrm_tf_tbl_type_set *
- ************************/
+/****************************
+ * hwrm_tf_session_register *
+ ****************************/
-/* hwrm_tf_tbl_type_set_input (size:1024b/128B) */
-struct hwrm_tf_tbl_type_set_input {
+/* hwrm_tf_session_register_input (size:704b/88B) */
+struct hwrm_tf_session_register_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37859,37 +40073,23 @@ struct hwrm_tf_tbl_type_set_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ /*
+ * Unique session identifier for the session that the
+ * register request want to create a new client on. This
+ * value originates from the first open request.
+ * The fw_session_id of the attach session includes PCIe bus
+ * info to distinguish the PF and session info to identify
+ * the associated TruFlow session.
+ */
uint32_t fw_session_id;
- /* Control flags. */
- uint16_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_TX
/* unused. */
- uint8_t unused0[2];
- /*
- * Type of the resource, defined globally in the
- * hwrm_tf_resc_type enum.
- */
- uint32_t type;
- /* Index of the type to retrieve. */
- uint32_t index;
- /* Size of the data to set. */
- uint16_t size;
- /* unused */
- uint8_t unused1[6];
- /* Data to be set. */
- uint8_t data[88];
+ uint32_t unused0;
+ /* Name of the session client. */
+ uint8_t session_client_name[64];
} __rte_packed;
-/* hwrm_tf_tbl_type_set_output (size:128b/16B) */
-struct hwrm_tf_tbl_type_set_output {
+/* hwrm_tf_session_register_output (size:128b/16B) */
+struct hwrm_tf_session_register_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37898,26 +40098,32 @@ struct hwrm_tf_tbl_type_set_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /*
+ * Unique session client identifier for the session created
+ * by the firmware. It includes the session the client it
+ * attached to and session client info.
+ */
+ uint32_t fw_session_client_id;
/* unused. */
- uint8_t unused0[7];
+ uint8_t unused0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field
- * is written last.
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-/*************************
- * hwrm_tf_ctxt_mem_rgtr *
- *************************/
+/******************************
+ * hwrm_tf_session_unregister *
+ ******************************/
-/* hwrm_tf_ctxt_mem_rgtr_input (size:256b/32B) */
-struct hwrm_tf_ctxt_mem_rgtr_input {
+/* hwrm_tf_session_unregister_input (size:192b/24B) */
+struct hwrm_tf_session_unregister_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -37946,49 +40152,20 @@ struct hwrm_tf_ctxt_mem_rgtr_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Control flags. */
- uint16_t flags;
- /* Counter PBL indirect levels. */
- uint8_t page_level;
- /* PBL pointer is physical start address. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
- /* PBL pointer points to PTE table. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
/*
- * PBL pointer points to PDE table with each entry pointing
- * to PTE tables.
+ * Unique session identifier for the session that the
+ * unregister request want to close a session client on.
*/
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
- HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
- /* Page size. */
- uint8_t page_size;
- /* 4KB page size. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
- /* 8KB page size. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
- /* 64KB page size. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
- /* 256KB page size. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
- /* 1MB page size. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
- /* 2MB page size. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
- /* 4MB page size. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
- /* 1GB page size. */
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
- #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
- HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G
- /* unused. */
- uint32_t unused0;
- /* Pointer to the PBL, or PDL depending on number of levels */
- uint64_t page_dir;
+ uint32_t fw_session_id;
+ /*
+ * Unique session client identifier for the session that the
+ * unregister request want to close.
+ */
+ uint32_t fw_session_client_id;
} __rte_packed;
-/* hwrm_tf_ctxt_mem_rgtr_output (size:128b/16B) */
-struct hwrm_tf_ctxt_mem_rgtr_output {
+/* hwrm_tf_session_unregister_output (size:128b/16B) */
+struct hwrm_tf_session_unregister_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -37997,31 +40174,26 @@ struct hwrm_tf_ctxt_mem_rgtr_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * Id/Handle to the recently register context memory. This
- * handle is passed to the TF session.
- */
- uint16_t ctx_id;
/* unused. */
- uint8_t unused0[5];
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been
- * completely written. When writing a command completion or
- * response to an internal processor, the order of writes has
- * to be such that this field is written last.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-/***************************
- * hwrm_tf_ctxt_mem_unrgtr *
- ***************************/
+/*************************
+ * hwrm_tf_session_close *
+ *************************/
-/* hwrm_tf_ctxt_mem_unrgtr_input (size:192b/24B) */
-struct hwrm_tf_ctxt_mem_unrgtr_input {
+/* hwrm_tf_session_close_input (size:192b/24B) */
+struct hwrm_tf_session_close_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38050,17 +40222,14 @@ struct hwrm_tf_ctxt_mem_unrgtr_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * Id/Handle to the recently register context memory. This
- * handle is passed to the TF session.
- */
- uint16_t ctx_id;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
/* unused. */
- uint8_t unused0[6];
+ uint8_t unused0[4];
} __rte_packed;
-/* hwrm_tf_ctxt_mem_unrgtr_output (size:128b/16B) */
-struct hwrm_tf_ctxt_mem_unrgtr_output {
+/* hwrm_tf_session_close_output (size:128b/16B) */
+struct hwrm_tf_session_close_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38072,23 +40241,23 @@ struct hwrm_tf_ctxt_mem_unrgtr_output {
/* unused. */
uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been
- * completely written. When writing a command completion or
- * response to an internal processor, the order of writes has
- * to be such that this field is written last.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
} __rte_packed;
/************************
- * hwrm_tf_ext_em_qcaps *
+ * hwrm_tf_session_qcfg *
************************/
-/* hwrm_tf_ext_em_qcaps_input (size:192b/24B) */
-struct hwrm_tf_ext_em_qcaps_input {
+/* hwrm_tf_session_qcfg_input (size:192b/24B) */
+struct hwrm_tf_session_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38117,28 +40286,14 @@ struct hwrm_tf_ext_em_qcaps_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Control flags. */
- uint32_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR \
- UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_RX \
- UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_TX \
- UINT32_C(0x1)
- #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_TX
- /* When set to 1, all offloaded flows will be sent to EXT EM. */
- #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
- UINT32_C(0x2)
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
/* unused. */
- uint32_t unused0;
+ uint8_t unused0[4];
} __rte_packed;
-/* hwrm_tf_ext_em_qcaps_output (size:320b/40B) */
-struct hwrm_tf_ext_em_qcaps_output {
+/* hwrm_tf_session_qcfg_output (size:128b/16B) */
+struct hwrm_tf_session_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38147,109 +40302,74 @@ struct hwrm_tf_ext_em_qcaps_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
+ /* RX action control settings flags. */
+ uint8_t rx_act_flags;
/*
- * When set to 1, indicates the the FW supports the Centralized
- * Memory Model. The concept designates one entity for the
- * memory allocation while all others ‘subscribe’ to it.
+ * A value of 1 in this field indicates that Global Flow ID
+ * reporting into cfa_code and cfa_metadata is enabled.
*/
- #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_ABCR_GFID_EN \
UINT32_C(0x1)
/*
- * When set to 1, indicates the the FW supports the Detached
- * Centralized Memory Model. The memory is allocated and managed
- * as a separate entity. All PFs and VFs will be granted direct
- * or semi-direct access to the allocated memory while none of
- * which can interfere with the management of the memory.
+ * A value of 1 in this field indicates that both inner and outer
+ * are stripped and inner tag is passed.
+ * Enabled.
*/
- #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_ABCR_VTAG_DLT_BOTH \
UINT32_C(0x2)
- /* unused. */
- uint32_t unused0;
- /* Support flags. */
- uint32_t supported;
/*
- * If set to 1, then EXT EM KEY0 table is supported using
- * crc32 hash.
- * If set to 0, EXT EM KEY0 table is not supported.
+ * A value of 1 in this field indicates that the re-use of
+ * existing tunnel L2 header SMAC is enabled for
+ * Non-tunnel L2, L2-L3 and IP-IP tunnel.
*/
- #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_RX_ACT_FLAGS_TECT_SMAC_OVR_RUTNSL2 \
+ UINT32_C(0x4)
+ /* TX Action control settings flags. */
+ uint8_t tx_act_flags;
+ /* Disabled. */
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_ABCR_VEB_EN \
UINT32_C(0x1)
/*
- * If set to 1, then EXT EM KEY1 table is supported using
- * lookup3 hash.
- * If set to 0, EXT EM KEY1 table is not supported.
+ * When set to 1 any GRE tunnels will include the
+ * optional Key field.
*/
- #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_GRE_SET_K \
UINT32_C(0x2)
/*
- * If set to 1, then EXT EM External Record table is supported.
- * If set to 0, EXT EM External Record table is not
- * supported. (This table includes action record, EFC
- * pointers, encap pointers)
+ * When set to 1, for GRE tunnels, the IPV6 Traffic Class (TC)
+ * field of the outer header is inherited from the inner header
+ * (if present) or the fixed value as taken from the encap
+ * record.
*/
- #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_IPV6_TC_IH \
UINT32_C(0x4)
/*
- * If set to 1, then EXT EM External Flow Counters table is
- * supported.
- * If set to 0, EXT EM External Flow Counters table is not
- * supported.
+ * When set to 1, for GRE tunnels, the IPV4 Type Of Service (TOS)
+ * field of the outer header is inherited from the inner header
+ * (if present) or the fixed value as taken from the encap record.
*/
- #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
+ #define HWRM_TF_SESSION_QCFG_OUTPUT_TX_ACT_FLAGS_TECT_IPV4_TOS_IH \
UINT32_C(0x8)
- /*
- * If set to 1, then FID table used for implicit flow flush
- * is supported.
- * If set to 0, then FID table used for implicit flow flush
- * is not supported.
- */
- #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
- UINT32_C(0x10)
- /*
- * The maximum number of entries supported by EXT EM. When
- * configuring the host memory the number of numbers of
- * entries that can supported are -
- * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M,
- * 128M entries.
- * Any value that are not these values, the FW will round
- * down to the closest support number of entries.
- */
- uint32_t max_entries_supported;
- /*
- * The entry size in bytes of each entry in the EXT EM
- * KEY0/KEY1 tables.
- */
- uint16_t key_entry_size;
- /*
- * The entry size in bytes of each entry in the EXT EM RECORD
- * tables.
- */
- uint16_t record_entry_size;
- /* The entry size in bytes of each entry in the EXT EM EFC tables. */
- uint16_t efc_entry_size;
- /* The FID size in bytes of each entry in the EXT EM FID tables. */
- uint16_t fid_entry_size;
/* unused. */
- uint8_t unused1[7];
+ uint8_t unused0[5];
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been
- * completely written. When writing a command completion or
- * response to an internal processor, the order of writes has
- * to be such that this field is written last.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
} __rte_packed;
-/*********************
- * hwrm_tf_ext_em_op *
- *********************/
+/******************************
+ * hwrm_tf_session_resc_qcaps *
+ ******************************/
-/* hwrm_tf_ext_em_op_input (size:192b/24B) */
-struct hwrm_tf_ext_em_op_input {
+/* hwrm_tf_session_resc_qcaps_input (size:256b/32B) */
+struct hwrm_tf_session_resc_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38278,51 +40398,36 @@ struct hwrm_tf_ext_em_op_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
/* Control flags. */
uint16_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_TX
- /* unused. */
- uint16_t unused0;
- /* The number of EXT EM key table entries to be configured. */
- uint16_t op;
- /* This value is reserved and should not be used. */
- #define HWRM_TF_EXT_EM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
- /*
- * To properly stop EXT EM and ensure there are no DMA's,
- * the caller must disable EXT EM for the given PF, using
- * this call. This will safely disable EXT EM and ensure
- * that all DMA'ed to the keys/records/efc have been
- * completed.
- */
- #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_DISABLE UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_QCAPS_INPUT_FLAGS_DIR_TX
/*
- * Once the EXT EM host memory has been configured, EXT EM
- * options have been configured. Then the caller should
- * enable EXT EM for the given PF. Note once this call has
- * been made, then the EXT EM mechanism will be active and
- * DMA's will occur as packets are processed.
+ * Defines the size of the provided qcaps_addr array
+ * buffer. The size should be set to the Resource Manager
+ * provided max number of qcaps entries which is device
+ * specific. Resource Manager gets the max size from HCAPI
+ * RM.
*/
- #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_ENABLE UINT32_C(0x2)
+ uint16_t qcaps_size;
/*
- * Clear EXT EM settings for the given PF so that the
- * register values are reset back to their initial state.
+ * This is the DMA address for the qcaps output data array
+ * buffer. Array is of tf_rm_resc_req_entry type and is
+ * device specific.
*/
- #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP UINT32_C(0x3)
- #define HWRM_TF_EXT_EM_OP_INPUT_OP_LAST \
- HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP
- /* unused. */
- uint16_t unused1;
+ uint64_t qcaps_addr;
} __rte_packed;
-/* hwrm_tf_ext_em_op_output (size:128b/16B) */
-struct hwrm_tf_ext_em_op_output {
+/* hwrm_tf_session_resc_qcaps_output (size:192b/24B) */
+struct hwrm_tf_session_resc_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38331,26 +40436,55 @@ struct hwrm_tf_ext_em_op_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* Control flags. */
+ uint32_t flags;
+ /* Session reservation strategy. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_MASK \
+ UINT32_C(0x3)
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_SFT \
+ 0
+ /* Static partitioning. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_STATIC \
+ UINT32_C(0x0)
+ /* Strategy 1. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_1 \
+ UINT32_C(0x1)
+ /* Strategy 2. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_2 \
+ UINT32_C(0x2)
+ /* Strategy 3. */
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_3 \
+ UINT32_C(0x3)
+ #define HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_LAST \
+ HWRM_TF_SESSION_RESC_QCAPS_OUTPUT_FLAGS_SESS_RESV_STRATEGY_3
+ /*
+ * Size of the returned qcaps_addr data array buffer. The
+ * value cannot exceed the size defined by the input msg,
+ * qcaps_size.
+ */
+ uint16_t size;
/* unused. */
- uint8_t unused0[7];
+ uint16_t unused0;
+ /* unused. */
+ uint8_t unused1[7];
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been
- * completely written. When writing a command completion or
- * response to an internal processor, the order of writes has
- * to be such that this field is written last.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-/**********************
- * hwrm_tf_ext_em_cfg *
- **********************/
+/******************************
+ * hwrm_tf_session_resc_alloc *
+ ******************************/
-/* hwrm_tf_ext_em_cfg_input (size:384b/48B) */
-struct hwrm_tf_ext_em_cfg_input {
+/* hwrm_tf_session_resc_alloc_input (size:320b/40B) */
+struct hwrm_tf_session_resc_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38379,65 +40513,42 @@ struct hwrm_tf_ext_em_cfg_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
/* Control flags. */
- uint32_t flags;
+ uint16_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR \
- UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_RX \
- UINT32_C(0x0)
+ #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_TX \
- UINT32_C(0x1)
- #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_TX
- /* When set to 1, all offloaded flows will be sent to EXT EM. */
- #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
- UINT32_C(0x2)
- /* When set to 1, secondary, 0 means primary. */
- #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_SECONDARY_PF \
- UINT32_C(0x4)
+ #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_ALLOC_INPUT_FLAGS_DIR_TX
/*
- * Group_id which used by Firmware to identify memory pools belonging
- * to certain group.
+ * Defines the array size of the provided req_addr and
+ * resv_addr array buffers. Should be set to the number of
+ * request entries.
*/
- uint16_t group_id;
+ uint16_t req_size;
/*
- * Dynamically reconfigure EEM pending cache every 1/10th of second.
- * If set to 0 it will disable the EEM HW flush of the pending cache.
+ * This is the DMA address for the request input data array
+ * buffer. Array is of tf_rm_resc_req_entry type. Size of the
+ * array buffer is provided by the 'req_size' field in this
+ * message.
*/
- uint8_t flush_interval;
- /* unused. */
- uint8_t unused0;
+ uint64_t req_addr;
/*
- * Configured EXT EM with the given number of entries. All
- * the EXT EM tables KEY0, KEY1, RECORD, EFC all have the
- * same number of entries and all tables will be configured
- * using this value. Current minimum value is 32k. Current
- * maximum value is 128M.
+ * This is the DMA address for the resc output data array
+ * buffer. Array is of tf_rm_resc_entry type. Size of the array
+ * buffer is provided by the 'req_size' field in this
+ * message.
*/
- uint32_t num_entries;
- /* unused. */
- uint32_t unused1;
- /* Configured EXT EM with the given context if for KEY0 table. */
- uint16_t key0_ctx_id;
- /* Configured EXT EM with the given context if for KEY1 table. */
- uint16_t key1_ctx_id;
- /* Configured EXT EM with the given context if for RECORD table. */
- uint16_t record_ctx_id;
- /* Configured EXT EM with the given context if for EFC table. */
- uint16_t efc_ctx_id;
- /* Configured EXT EM with the given context if for EFC table. */
- uint16_t fid_ctx_id;
- /* unused. */
- uint16_t unused2;
- /* unused. */
- uint32_t unused3;
+ uint64_t resc_addr;
} __rte_packed;
-/* hwrm_tf_ext_em_cfg_output (size:128b/16B) */
-struct hwrm_tf_ext_em_cfg_output {
+/* hwrm_tf_session_resc_alloc_output (size:128b/16B) */
+struct hwrm_tf_session_resc_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38446,26 +40557,33 @@ struct hwrm_tf_ext_em_cfg_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /*
+ * Size of the returned tf_rm_resc_entry data array. The value
+ * cannot exceed the req_size defined by the input msg. The data
+ * array is returned using the resv_addr specified DMA
+ * address also provided by the input msg.
+ */
+ uint16_t size;
/* unused. */
- uint8_t unused0[7];
+ uint8_t unused0[5];
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been
- * completely written. When writing a command completion or
- * response to an internal processor, the order of writes has
- * to be such that this field is written last.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-/***********************
- * hwrm_tf_ext_em_qcfg *
- ***********************/
+/*****************************
+ * hwrm_tf_session_resc_free *
+ *****************************/
-/* hwrm_tf_ext_em_qcfg_input (size:192b/24B) */
-struct hwrm_tf_ext_em_qcfg_input {
+/* hwrm_tf_session_resc_free_input (size:256b/32B) */
+struct hwrm_tf_session_resc_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38494,22 +40612,34 @@ struct hwrm_tf_ext_em_qcfg_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
/* Control flags. */
- uint32_t flags;
+ uint16_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX
- /* unused. */
- uint32_t unused0;
-} __rte_packed;
-
-/* hwrm_tf_ext_em_qcfg_output (size:256b/32B) */
-struct hwrm_tf_ext_em_qcfg_output {
+ #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_FREE_INPUT_FLAGS_DIR_TX
+ /*
+ * Defines the size, in bytes, of the provided free_addr
+ * buffer.
+ */
+ uint16_t free_size;
+ /*
+ * This is the DMA address for the free input data array
+ * buffer. Array is of tf_rm_resc_entry type. Size of the
+ * buffer is provided by the 'free_size' field of this
+ * message.
+ */
+ uint64_t free_addr;
+} __rte_packed;
+
+/* hwrm_tf_session_resc_free_output (size:128b/16B) */
+struct hwrm_tf_session_resc_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38518,54 +40648,26 @@ struct hwrm_tf_ext_em_qcfg_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Control flags. */
- uint32_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR \
- UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_RX \
- UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_TX \
- UINT32_C(0x1)
- #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_LAST \
- HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_TX
- /* When set to 1, all offloaded flows will be sent to EXT EM. */
- #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \
- UINT32_C(0x2)
- /* The number of entries the FW has configured for EXT EM. */
- uint32_t num_entries;
- /* Configured EXT EM with the given context if for KEY0 table. */
- uint16_t key0_ctx_id;
- /* Configured EXT EM with the given context if for KEY1 table. */
- uint16_t key1_ctx_id;
- /* Configured EXT EM with the given context if for RECORD table. */
- uint16_t record_ctx_id;
- /* Configured EXT EM with the given context if for EFC table. */
- uint16_t efc_ctx_id;
- /* Configured EXT EM with the given context if for EFC table. */
- uint16_t fid_ctx_id;
/* unused. */
- uint8_t unused0[5];
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been
- * completely written. When writing a command completion or
- * response to an internal processor, the order of writes has
- * to be such that this field is written last.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
*/
uint8_t valid;
} __rte_packed;
-/*********************
- * hwrm_tf_em_insert *
- *********************/
+/******************************
+ * hwrm_tf_session_resc_flush *
+ ******************************/
-/* hwrm_tf_em_insert_input (size:832b/104B) */
-struct hwrm_tf_em_insert_input {
+/* hwrm_tf_session_resc_flush_input (size:256b/32B) */
+struct hwrm_tf_session_resc_flush_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38594,34 +40696,34 @@ struct hwrm_tf_em_insert_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware Session Id. */
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
uint32_t fw_session_id;
- /* Control Flags. */
+ /* Control flags. */
uint16_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_TX
- /* Reported match strength. */
- uint16_t strength;
- /* Index to action. */
- uint32_t action_ptr;
- /* Index of EM record. */
- uint32_t em_record_idx;
- /* EM Key value. */
- uint64_t em_key[8];
- /* Number of bits in em_key. */
- uint16_t em_key_bitlen;
- /* unused. */
- uint16_t unused0[3];
+ #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_SESSION_RESC_FLUSH_INPUT_FLAGS_DIR_TX
+ /*
+ * Defines the size, in bytes, of the provided flush_addr
+ * buffer.
+ */
+ uint16_t flush_size;
+ /*
+ * This is the DMA address for the flush input data array
+ * buffer. Array of tf_rm_resc_entry type. Size of the
+ * buffer is provided by the 'flush_size' field in this
+ * message.
+ */
+ uint64_t flush_addr;
} __rte_packed;
-/* hwrm_tf_em_insert_output (size:128b/16B) */
-struct hwrm_tf_em_insert_output {
+/* hwrm_tf_session_resc_flush_output (size:128b/16B) */
+struct hwrm_tf_session_resc_flush_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38630,23 +40732,48 @@ struct hwrm_tf_em_insert_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* EM record pointer index. */
- uint16_t rptr_index;
- /* EM record offset 0~3. */
- uint8_t rptr_entry;
- /* Number of word entries consumed by the key. */
- uint8_t num_of_entries;
/* unused. */
- uint32_t unused0;
+ uint8_t unused0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field is
+ * written last.
+ */
+ uint8_t valid;
} __rte_packed;
-/*********************
- * hwrm_tf_em_delete *
- *********************/
+/* TruFlow RM capability of a resource. */
+/* tf_rm_resc_req_entry (size:64b/8B) */
+struct tf_rm_resc_req_entry {
+ /* Type of the resource, defined globally in HCAPI RM. */
+ uint32_t type;
+ /* Minimum value. */
+ uint16_t min;
+ /* Maximum value. */
+ uint16_t max;
+} __rte_packed;
+/* TruFlow RM reservation information. */
+/* tf_rm_resc_entry (size:64b/8B) */
+struct tf_rm_resc_entry {
+ /* Type of the resource, defined globally in HCAPI RM. */
+ uint32_t type;
+ /* Start offset. */
+ uint16_t start;
+ /* Number of resources. */
+ uint16_t stride;
+} __rte_packed;
-/* hwrm_tf_em_delete_input (size:832b/104B) */
-struct hwrm_tf_em_delete_input {
+/************************
+ * hwrm_tf_tbl_type_get *
+ ************************/
+
+
+/* hwrm_tf_tbl_type_get_input (size:256b/32B) */
+struct hwrm_tf_tbl_type_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38675,32 +40802,31 @@ struct hwrm_tf_em_delete_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Session Id. */
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
uint32_t fw_session_id;
/* Control flags. */
uint16_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_TX
- /* Unused0 */
- uint16_t unused0;
- /* EM internal flow hanndle. */
- uint64_t flow_handle;
- /* EM Key value */
- uint64_t em_key[8];
- /* Number of bits in em_key. */
- uint16_t em_key_bitlen;
+ #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TBL_TYPE_GET_INPUT_FLAGS_DIR_TX
/* unused. */
- uint16_t unused1[3];
+ uint8_t unused0[2];
+ /*
+ * Type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
+ */
+ uint32_t type;
+ /* Index of the type to retrieve. */
+ uint32_t index;
} __rte_packed;
-/* hwrm_tf_em_delete_output (size:128b/16B) */
-struct hwrm_tf_em_delete_output {
+/* hwrm_tf_tbl_type_get_output (size:1216b/152B) */
+struct hwrm_tf_tbl_type_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38709,19 +40835,34 @@ struct hwrm_tf_em_delete_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Original stack allocation index. */
- uint16_t em_index;
- /* unused. */
- uint16_t unused0[3];
+ /* Response code. */
+ uint32_t resp_code;
+ /* Response size. */
+ uint16_t size;
+ /* unused */
+ uint16_t unused0;
+ /* Response data. */
+ uint8_t data[128];
+ /* unused */
+ uint8_t unused1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
+ */
+ uint8_t valid;
} __rte_packed;
-/********************
- * hwrm_tf_tcam_set *
- ********************/
+/************************
+ * hwrm_tf_tbl_type_set *
+ ************************/
-/* hwrm_tf_tcam_set_input (size:1024b/128B) */
-struct hwrm_tf_tcam_set_input {
+/* hwrm_tf_tbl_type_set_input (size:1024b/128B) */
+struct hwrm_tf_tbl_type_set_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38753,49 +40894,34 @@ struct hwrm_tf_tcam_set_input {
/* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
uint32_t fw_session_id;
/* Control flags. */
- uint32_t flags;
+ uint16_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_TX
- /*
- * Indicate device data is being sent via DMA, the device
- * data is packing does not change.
- */
- #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DMA UINT32_C(0x2)
+ #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TBL_TYPE_SET_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint8_t unused0[2];
/*
- * TCAM type of the resource, defined globally in the
+ * Type of the resource, defined globally in the
* hwrm_tf_resc_type enum.
*/
uint32_t type;
- /* Index of TCAM entry. */
- uint16_t idx;
- /* Number of bytes in the TCAM key. */
- uint8_t key_size;
- /* Number of bytes in the TCAM result. */
- uint8_t result_size;
- /*
- * Offset from which the mask bytes start in the device data
- * array, key offset is always 0.
- */
- uint8_t mask_offset;
- /* Offset from which the result bytes start in the device data array. */
- uint8_t result_offset;
- /* unused. */
- uint8_t unused0[6];
- /*
- * TCAM key located at offset 0, mask located at mask_offsec
- * and result at result_offsec for the device.
- */
- uint8_t dev_data[88];
+ /* Index of the type to retrieve. */
+ uint32_t index;
+ /* Size of the data to set. */
+ uint16_t size;
+ /* unused */
+ uint8_t unused1[6];
+ /* Data to be set. */
+ uint8_t data[88];
} __rte_packed;
-/* hwrm_tf_tcam_set_output (size:128b/16B) */
-struct hwrm_tf_tcam_set_output {
+/* hwrm_tf_tbl_type_set_output (size:128b/16B) */
+struct hwrm_tf_tbl_type_set_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38807,23 +40933,23 @@ struct hwrm_tf_tcam_set_output {
/* unused. */
uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the
- * output is completely written to RAM. This field should be
- * read as '1' to indicate that the output has been
- * completely written. When writing a command completion or
- * response to an internal processor, the order of writes has
- * to be such that this field is written last.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
} __rte_packed;
-/********************
- * hwrm_tf_tcam_get *
- ********************/
+/**************************
+ * hwrm_tf_ctxt_mem_alloc *
+ **************************/
-/* hwrm_tf_tcam_get_input (size:256b/32B) */
-struct hwrm_tf_tcam_get_input {
+/* hwrm_tf_ctxt_mem_alloc_input (size:192b/24B) */
+struct hwrm_tf_ctxt_mem_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38852,31 +40978,14 @@ struct hwrm_tf_tcam_get_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* Control flags. */
- uint32_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_TX
- /*
- * TCAM type of the resource, defined globally in the
- * hwrm_tf_resc_type enum.
- */
- uint32_t type;
- /* Index of a TCAM entry. */
- uint16_t idx;
+ /* Size in KB of memory to be allocated. */
+ uint32_t mem_size;
/* unused. */
- uint16_t unused0;
+ uint32_t unused0;
} __rte_packed;
-/* hwrm_tf_tcam_get_output (size:2368b/296B) */
-struct hwrm_tf_tcam_get_output {
+/* hwrm_tf_ctxt_mem_alloc_output (size:192b/24B) */
+struct hwrm_tf_ctxt_mem_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38885,23 +40994,49 @@ struct hwrm_tf_tcam_get_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Number of bytes in the TCAM key. */
- uint8_t key_size;
- /* Number of bytes in the TCAM entry. */
- uint8_t result_size;
- /* Offset from which the mask bytes start in the device data array. */
- uint8_t mask_offset;
- /* Offset from which the result bytes start in the device data array. */
- uint8_t result_offset;
- /* unused. */
- uint8_t unused0[4];
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
/*
- * TCAM key located at offset 0, mask located at mask_offsec
- * and result at result_offsec for the device.
+ * PBL pointer points to PDE table with each entry pointing
+ * to PTE tables.
*/
- uint8_t dev_data[272];
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LAST \
+ HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 128KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_128K UINT32_C(0x5)
+ /* 256KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 512KB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_512K UINT32_C(0x7)
+ /* 1MB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 8MB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_8M UINT32_C(0xb)
+ /* 1GB page size. */
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_LAST \
+ HWRM_TF_CTXT_MEM_ALLOC_OUTPUT_PAGE_SIZE_1G
/* unused. */
- uint8_t unused1[7];
+ uint8_t unused0[5];
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
@@ -38913,13 +41048,13 @@ struct hwrm_tf_tcam_get_output {
uint8_t valid;
} __rte_packed;
-/*********************
- * hwrm_tf_tcam_move *
- *********************/
+/*************************
+ * hwrm_tf_ctxt_mem_free *
+ *************************/
-/* hwrm_tf_tcam_move_input (size:1024b/128B) */
-struct hwrm_tf_tcam_move_input {
+/* hwrm_tf_ctxt_mem_free_input (size:256b/32B) */
+struct hwrm_tf_ctxt_mem_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -38948,33 +41083,53 @@ struct hwrm_tf_tcam_move_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* Control flags. */
- uint32_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_TX
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
/*
- * TCAM type of the resource, defined globally in the
- * hwrm_tf_resc_type enum.
+ * PBL pointer points to PDE table with each entry pointing
+ * to PTE tables.
*/
- uint32_t type;
- /* Number of TCAM index pairs to be swapped for the device. */
- uint16_t count;
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LAST \
+ HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 128KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_128K UINT32_C(0x5)
+ /* 256KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 512KB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_512K UINT32_C(0x7)
+ /* 1MB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 8MB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_8M UINT32_C(0xb)
+ /* 1GB page size. */
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_LAST \
+ HWRM_TF_CTXT_MEM_FREE_INPUT_PAGE_SIZE_1G
/* unused. */
- uint16_t unused0;
- /* TCAM index pairs to be swapped for the device. */
- uint16_t idx_pairs[48];
+ uint8_t unused0[6];
} __rte_packed;
-/* hwrm_tf_tcam_move_output (size:128b/16B) */
-struct hwrm_tf_tcam_move_output {
+/* hwrm_tf_ctxt_mem_free_output (size:128b/16B) */
+struct hwrm_tf_ctxt_mem_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -38996,13 +41151,13 @@ struct hwrm_tf_tcam_move_output {
uint8_t valid;
} __rte_packed;
-/*********************
- * hwrm_tf_tcam_free *
- *********************/
+/*************************
+ * hwrm_tf_ctxt_mem_rgtr *
+ *************************/
-/* hwrm_tf_tcam_free_input (size:1024b/128B) */
-struct hwrm_tf_tcam_free_input {
+/* hwrm_tf_ctxt_mem_rgtr_input (size:256b/32B) */
+struct hwrm_tf_ctxt_mem_rgtr_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39031,33 +41186,55 @@ struct hwrm_tf_tcam_free_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
/* Control flags. */
- uint32_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_TX
+ uint16_t flags;
+ /* Counter PBL indirect levels. */
+ uint8_t page_level;
+ /* PBL pointer is physical start address. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_0 UINT32_C(0x0)
+ /* PBL pointer points to PTE table. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_1 UINT32_C(0x1)
/*
- * TCAM type of the resource, defined globally in the
- * hwrm_tf_resc_type enum.
+ * PBL pointer points to PDE table with each entry pointing
+ * to PTE tables.
*/
- uint32_t type;
- /* Number of TCAM index to be deleted for the device. */
- uint16_t count;
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2 UINT32_C(0x2)
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LAST \
+ HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_LEVEL_LVL_2
+ /* Page size. */
+ uint8_t page_size;
+ /* 4KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4K UINT32_C(0x0)
+ /* 8KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8K UINT32_C(0x1)
+ /* 64KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_64K UINT32_C(0x4)
+ /* 128KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_128K UINT32_C(0x5)
+ /* 256KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_256K UINT32_C(0x6)
+ /* 512KB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_512K UINT32_C(0x7)
+ /* 1MB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1M UINT32_C(0x8)
+ /* 2MB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_2M UINT32_C(0x9)
+ /* 4MB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_4M UINT32_C(0xa)
+ /* 8MB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_8M UINT32_C(0xb)
+ /* 1GB page size. */
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G UINT32_C(0x12)
+ #define HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_LAST \
+ HWRM_TF_CTXT_MEM_RGTR_INPUT_PAGE_SIZE_1G
/* unused. */
- uint16_t unused0;
- /* TCAM index list to be deleted for the device. */
- uint16_t idx_list[48];
+ uint32_t unused0;
+ /* Pointer to the PBL, or PDL depending on number of levels */
+ uint64_t page_dir;
} __rte_packed;
-/* hwrm_tf_tcam_free_output (size:128b/16B) */
-struct hwrm_tf_tcam_free_output {
+/* hwrm_tf_ctxt_mem_rgtr_output (size:128b/16B) */
+struct hwrm_tf_ctxt_mem_rgtr_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39066,8 +41243,13 @@ struct hwrm_tf_tcam_free_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /*
+ * Id/Handle to the recently register context memory. This
+ * handle is passed to the TF session.
+ */
+ uint16_t ctx_id;
/* unused. */
- uint8_t unused0[7];
+ uint8_t unused0[5];
/*
* This field is used in Output records to indicate that the
* output is completely written to RAM. This field should be
@@ -39079,13 +41261,13 @@ struct hwrm_tf_tcam_free_output {
uint8_t valid;
} __rte_packed;
-/**************************
- * hwrm_tf_global_cfg_set *
- **************************/
+/***************************
+ * hwrm_tf_ctxt_mem_unrgtr *
+ ***************************/
-/* hwrm_tf_global_cfg_set_input (size:448b/56B) */
-struct hwrm_tf_global_cfg_set_input {
+/* hwrm_tf_ctxt_mem_unrgtr_input (size:192b/24B) */
+struct hwrm_tf_ctxt_mem_unrgtr_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39114,34 +41296,17 @@ struct hwrm_tf_global_cfg_set_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
- /* Control flags. */
- uint32_t flags;
- /* Indicates the flow direction. */
- #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
- /* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
- /* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX
- /* Global Cfg type */
- uint32_t type;
- /* Offset of the type */
- uint32_t offset;
- /* Size of the data to set in bytes */
- uint16_t size;
- /* unused. */
- uint8_t unused0[6];
- /* Data to set */
- uint8_t data[8];
- /* Mask of data to set, 0 indicates no mask */
- uint8_t mask[8];
+ /*
+ * Id/Handle to the recently register context memory. This
+ * handle is passed to the TF session.
+ */
+ uint16_t ctx_id;
+ /* unused. */
+ uint8_t unused0[6];
} __rte_packed;
-/* hwrm_tf_global_cfg_set_output (size:128b/16B) */
-struct hwrm_tf_global_cfg_set_output {
+/* hwrm_tf_ctxt_mem_unrgtr_output (size:128b/16B) */
+struct hwrm_tf_ctxt_mem_unrgtr_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39163,13 +41328,13 @@ struct hwrm_tf_global_cfg_set_output {
uint8_t valid;
} __rte_packed;
-/**************************
- * hwrm_tf_global_cfg_get *
- **************************/
+/************************
+ * hwrm_tf_ext_em_qcaps *
+ ************************/
-/* hwrm_tf_global_cfg_get_input (size:320b/40B) */
-struct hwrm_tf_global_cfg_get_input {
+/* hwrm_tf_ext_em_qcaps_input (size:192b/24B) */
+struct hwrm_tf_ext_em_qcaps_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39198,30 +41363,28 @@ struct hwrm_tf_global_cfg_get_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
/* Control flags. */
uint32_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR \
+ UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_RX \
+ UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX
- /* Global Cfg type */
- uint32_t type;
- /* Offset of the type */
- uint32_t offset;
- /* Size of the data to set in bytes */
- uint16_t size;
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_TX \
+ UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_DIR_TX
+ /* When set to 1, all offloaded flows will be sent to EXT EM. */
+ #define HWRM_TF_EXT_EM_QCAPS_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x2)
/* unused. */
- uint8_t unused0[6];
+ uint32_t unused0;
} __rte_packed;
-/* hwrm_tf_global_cfg_get_output (size:256b/32B) */
-struct hwrm_tf_global_cfg_get_output {
+/* hwrm_tf_ext_em_qcaps_output (size:384b/48B) */
+struct hwrm_tf_ext_em_qcaps_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39230,21 +41393,133 @@ struct hwrm_tf_global_cfg_get_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Size of the data read in bytes */
- uint16_t size;
+ uint32_t flags;
+ /*
+ * When set to 1, indicates the the FW supports the Centralized
+ * Memory Model. The concept designates one entity for the
+ * memory allocation while all others ‘subscribe’ to it.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ UINT32_C(0x1)
+ /*
+ * When set to 1, indicates the the FW supports the Detached
+ * Centralized Memory Model. The memory is allocated and managed
+ * as a separate entity. All PFs and VFs will be granted direct
+ * or semi-direct access to the allocated memory while none of
+ * which can interfere with the management of the memory.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_DETACHED_CENTRALIZED_MEMORY_MODEL_SUPPORTED \
+ UINT32_C(0x2)
+ /* When set to 1, indicates FW support for host based EEM memory. */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_HOST_MEMORY_SUPPORTED \
+ UINT32_C(0x4)
+ /* When set to 1, indicates FW support for on-chip based EEM memory. */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_FLAGS_FW_MEMORY_SUPPORTED \
+ UINT32_C(0x8)
/* unused. */
- uint8_t unused0[6];
- /* Data to set */
- uint8_t data[16];
+ uint32_t unused0;
+ /* Support flags. */
+ uint32_t supported;
+ /*
+ * If set to 1, then EXT EM KEY0 table is supported using
+ * crc32 hash.
+ * If set to 0, EXT EM KEY0 table is not supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_KEY0_TABLE \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, then EXT EM KEY1 table is supported using
+ * lookup3 hash.
+ * If set to 0, EXT EM KEY1 table is not supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_KEY1_TABLE \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, then EXT EM External Record table is supported.
+ * If set to 0, EXT EM External Record table is not
+ * supported. (This table includes action record, EFC
+ * pointers, encap pointers)
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_RECORD_TABLE \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, then EXT EM External Flow Counters table is
+ * supported.
+ * If set to 0, EXT EM External Flow Counters table is not
+ * supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_EXTERNAL_FLOW_COUNTERS_TABLE \
+ UINT32_C(0x8)
+ /*
+ * If set to 1, then FID table used for implicit flow flush
+ * is supported.
+ * If set to 0, then FID table used for implicit flow flush
+ * is not supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_FID_TABLE \
+ UINT32_C(0x10)
+ /*
+ * If set to 1, then table scopes are supported.
+ * If set to 0, then table scopes are not supported.
+ */
+ #define HWRM_TF_EXT_EM_QCAPS_OUTPUT_SUPPORTED_TBL_SCOPES \
+ UINT32_C(0x20)
+ /*
+ * The maximum number of entries supported by EXT EM. When
+ * configuring the host memory the number of numbers of
+ * entries that can supported are -
+ * 32k, 64k 128k, 256k, 512k, 1M, 2M, 4M, 8M, 32M, 64M,
+ * 128M entries.
+ * Any value that are not these values, the FW will round
+ * down to the closest support number of entries.
+ */
+ uint32_t max_entries_supported;
+ /*
+ * The entry size in bytes of each entry in the EXT EM
+ * KEY0/KEY1 tables.
+ */
+ uint16_t key_entry_size;
+ /*
+ * The entry size in bytes of each entry in the EXT EM RECORD
+ * tables.
+ */
+ uint16_t record_entry_size;
+ /* The entry size in bytes of each entry in the EXT EM EFC tables. */
+ uint16_t efc_entry_size;
+ /* The FID size in bytes of each entry in the EXT EM FID tables. */
+ uint16_t fid_entry_size;
+ /* Maximum number of ctxt mem allocations allowed. */
+ uint32_t max_ctxt_mem_allocs;
+ /*
+ * Maximum number of static buckets that can be assigned to lookup
+ * table scopes.
+ */
+ uint32_t max_static_buckets;
+ /*
+ * Maximum number of all (static and dynamic) buckets that can
+ * be assigned to lookup table scopes.
+ */
+ uint32_t max_total_buckets;
+ /* unused. */
+ uint8_t unused1[3];
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
+ */
+ uint8_t valid;
} __rte_packed;
-/**********************
- * hwrm_tf_if_tbl_get *
- **********************/
+/*********************
+ * hwrm_tf_ext_em_op *
+ *********************/
-/* hwrm_tf_if_tbl_get_input (size:256b/32B) */
-struct hwrm_tf_if_tbl_get_input {
+/* hwrm_tf_ext_em_op_input (size:192b/24B) */
+struct hwrm_tf_ext_em_op_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39273,31 +41548,51 @@ struct hwrm_tf_if_tbl_get_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
/* Control flags. */
uint16_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_TX
- /* Size of the data to set. */
- uint16_t size;
+ #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_OP_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint16_t unused0;
+ /* The number of EXT EM key table entries to be configured. */
+ uint16_t op;
+ /* This value is reserved and should not be used. */
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_RESERVED UINT32_C(0x0)
/*
- * Type of the resource, defined globally in the
- * hwrm_tf_resc_type enum.
+ * To properly stop EXT EM and ensure there are no DMA's,
+ * the caller must disable EXT EM for the given PF, using
+ * this call. This will safely disable EXT EM and ensure
+ * that all DMA'ed to the keys/records/efc have been
+ * completed.
*/
- uint32_t type;
- /* Index of the type to retrieve. */
- uint32_t index;
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_DISABLE UINT32_C(0x1)
+ /*
+ * Once the EXT EM host memory has been configured, EXT EM
+ * options have been configured. Then the caller should
+ * enable EXT EM for the given PF. Note once this call has
+ * been made, then the EXT EM mechanism will be active and
+ * DMA's will occur as packets are processed.
+ */
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_ENABLE UINT32_C(0x2)
+ /*
+ * Clear EXT EM settings for the given PF so that the
+ * register values are reset back to their initial state.
+ */
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP UINT32_C(0x3)
+ #define HWRM_TF_EXT_EM_OP_INPUT_OP_LAST \
+ HWRM_TF_EXT_EM_OP_INPUT_OP_EXT_EM_CLEANUP
+ /* unused. */
+ uint16_t unused1;
} __rte_packed;
-/* hwrm_tf_if_tbl_get_output (size:256b/32B) */
-struct hwrm_tf_if_tbl_get_output {
+/* hwrm_tf_ext_em_op_output (size:128b/16B) */
+struct hwrm_tf_ext_em_op_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39306,34 +41601,26 @@ struct hwrm_tf_if_tbl_get_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Response code. */
- uint32_t resp_code;
- /* Response size. */
- uint16_t size;
- /* unused */
- uint16_t unused0;
- /* Response data. */
- uint8_t data[8];
- /* unused */
- uint8_t unused1[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field
- * is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/***************************
- * hwrm_tf_if_tbl_type_set *
- ***************************/
+/**********************
+ * hwrm_tf_ext_em_cfg *
+ **********************/
-/* hwrm_tf_if_tbl_set_input (size:384b/48B) */
-struct hwrm_tf_if_tbl_set_input {
+/* hwrm_tf_ext_em_cfg_input (size:512b/64B) */
+struct hwrm_tf_ext_em_cfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39362,37 +41649,163 @@ struct hwrm_tf_if_tbl_set_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
- uint32_t fw_session_id;
/* Control flags. */
- uint16_t flags;
+ uint32_t flags;
/* Indicates the flow direction. */
- #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR \
+ UINT32_C(0x1)
/* If this bit set to 0, then it indicates rx flow. */
- #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_RX \
+ UINT32_C(0x0)
/* If this bit is set to 1, then it indicates that tx flow. */
- #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
- #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_LAST \
- HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_TX
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_TX \
+ UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_DIR_TX
+ /* When set to 1, all offloaded flows will be sent to EXT EM. */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x2)
+ /* When set to 1, secondary, 0 means primary. */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_FLAGS_SECONDARY_PF \
+ UINT32_C(0x4)
+ /*
+ * Group_id which used by Firmware to identify memory pools belonging
+ * to certain group.
+ */
+ uint16_t group_id;
+ /*
+ * Dynamically reconfigure EEM pending cache every 1/10th of second.
+ * If set to 0 it will disable the EEM HW flush of the pending cache.
+ */
+ uint8_t flush_interval;
/* unused. */
- uint8_t unused0[2];
+ uint8_t unused0;
/*
- * Type of the resource, defined globally in the
- * hwrm_tf_resc_type enum.
+ * Configured EXT EM with the given number of entries. All
+ * the EXT EM tables KEY0, KEY1, RECORD, EFC all have the
+ * same number of entries and all tables will be configured
+ * using this value. Current minimum value is 32k. Current
+ * maximum value is 128M.
*/
- uint32_t type;
- /* Index of the type to set. */
- uint32_t index;
- /* Size of the data to set. */
- uint16_t size;
- /* unused */
- uint8_t unused1[6];
- /* Data to be set. */
- uint8_t data[8];
+ uint32_t num_entries;
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the group_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_GROUP_ID \
+ UINT32_C(0x1)
+ /*
+ * This bit must be '1' for the flush_interval field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_FLUSH_INTERVAL \
+ UINT32_C(0x2)
+ /*
+ * This bit must be '1' for the num_entries field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_NUM_ENTRIES \
+ UINT32_C(0x4)
+ /*
+ * This bit must be '1' for the key0_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_KEY0_CTX_ID \
+ UINT32_C(0x8)
+ /*
+ * This bit must be '1' for the key1_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_KEY1_CTX_ID \
+ UINT32_C(0x10)
+ /*
+ * This bit must be '1' for the record_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_RECORD_CTX_ID \
+ UINT32_C(0x20)
+ /*
+ * This bit must be '1' for the efc_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_EFC_CTX_ID \
+ UINT32_C(0x40)
+ /*
+ * This bit must be '1' for the fid_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_FID_CTX_ID \
+ UINT32_C(0x80)
+ /*
+ * This bit must be '1' for the action_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_ACTION_CTX_ID \
+ UINT32_C(0x100)
+ /*
+ * This bit must be '1' for the action_tbl_scope field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_ACTION_TBL_SCOPE \
+ UINT32_C(0x200)
+ /*
+ * This bit must be '1' for the lkup_ctx_id field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_CTX_ID \
+ UINT32_C(0x400)
+ /*
+ * This bit must be '1' for the lkup_tbl_scope field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_TBL_SCOPE \
+ UINT32_C(0x800)
+ /*
+ * This bit must be '1' for the lkup_static_buckets field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_STATIC_BUCKETS \
+ UINT32_C(0x1000)
+ /*
+ * This bit must be '1' for the lkup_dynamic_buckets field to be
+ * configured.
+ */
+ #define HWRM_TF_EXT_EM_CFG_INPUT_ENABLES_LKUP_DYNAMIC_BUCKETS \
+ UINT32_C(0x2000)
+ /* Configured EXT EM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EXT EM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EXT EM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EXT EM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+ /* Configured EXT EM with the given context if for EFC table. */
+ uint16_t fid_ctx_id;
+ /* Context id of action table scope. */
+ uint16_t action_ctx_id;
+ /* Table scope id used for action record entries. */
+ uint16_t action_tbl_scope;
+ /* Context id of lookup table scope. */
+ uint16_t lkup_ctx_id;
+ /* Table scope id used for EM lookup entries. */
+ uint16_t lkup_tbl_scope;
+ /* unused. */
+ uint16_t unused1;
+ /*
+ * Number of 32B static buckets to be allocated at the beginning
+ * of table scope.
+ */
+ uint32_t lkup_static_buckets;
+ /* Number of 32B dynamic buckets to be allocated. */
+ uint32_t lkup_dynamic_buckets;
+ /* unused. */
+ uint32_t unused2;
} __rte_packed;
-/* hwrm_tf_if_tbl_set_output (size:128b/16B) */
-struct hwrm_tf_if_tbl_set_output {
+/* hwrm_tf_ext_em_cfg_output (size:128b/16B) */
+struct hwrm_tf_ext_em_cfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39404,23 +41817,23 @@ struct hwrm_tf_if_tbl_set_output {
/* unused. */
uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal
- * processor, the order of writes has to be such that this field
- * is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/******************************
- * hwrm_tunnel_dst_port_query *
- ******************************/
+/***********************
+ * hwrm_tf_ext_em_qcfg *
+ ***********************/
-/* hwrm_tunnel_dst_port_query_input (size:192b/24B) */
-struct hwrm_tunnel_dst_port_query_input {
+/* hwrm_tf_ext_em_qcfg_input (size:192b/24B) */
+struct hwrm_tf_ext_em_qcfg_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39449,33 +41862,22 @@ struct hwrm_tunnel_dst_port_query_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \
- HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6
- uint8_t unused_0[7];
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_QCFG_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint32_t unused0;
} __rte_packed;
-/* hwrm_tunnel_dst_port_query_output (size:128b/16B) */
-struct hwrm_tunnel_dst_port_query_output {
+/* hwrm_tf_ext_em_qcfg_output (size:448b/56B) */
+struct hwrm_tf_ext_em_qcfg_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39484,42 +41886,123 @@ struct hwrm_tunnel_dst_port_query_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR \
+ UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_RX \
+ UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_TX \
+ UINT32_C(0x1)
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_DIR_TX
+ /* When set to 1, all offloaded flows will be sent to EXT EM. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_FLAGS_PREFERRED_OFFLOAD \
+ UINT32_C(0x2)
+ /* The number of entries the FW has configured for EXT EM. */
+ uint32_t num_entries;
+ /* Configured EXT EM with the given context if for KEY0 table. */
+ uint16_t key0_ctx_id;
+ /* Configured EXT EM with the given context if for KEY1 table. */
+ uint16_t key1_ctx_id;
+ /* Configured EXT EM with the given context if for RECORD table. */
+ uint16_t record_ctx_id;
+ /* Configured EXT EM with the given context if for EFC table. */
+ uint16_t efc_ctx_id;
+ /* Configured EXT EM with the given context if for EFC table. */
+ uint16_t fid_ctx_id;
+ /* unused. */
+ uint16_t unused0;
+ uint32_t supported;
+ /* This bit must be '1' for the group_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_GROUP_ID \
+ UINT32_C(0x1)
+ /* This bit must be '1' for the flush_interval field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_FLUSH_INTERVAL \
+ UINT32_C(0x2)
+ /* This bit must be '1' for the num_entries field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_NUM_ENTRIES \
+ UINT32_C(0x4)
+ /* This bit must be '1' for the key0_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_KEY0_CTX_ID \
+ UINT32_C(0x8)
+ /* This bit must be '1' for the key1_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_KEY1_CTX_ID \
+ UINT32_C(0x10)
+ /* This bit must be '1' for the record_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_RECORD_CTX_ID \
+ UINT32_C(0x20)
+ /* This bit must be '1' for the efc_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_EFC_CTX_ID \
+ UINT32_C(0x40)
+ /* This bit must be '1' for the fid_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_FID_CTX_ID \
+ UINT32_C(0x80)
+ /* This bit must be '1' for the action_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_ACTION_CTX_ID \
+ UINT32_C(0x100)
+ /* This bit must be '1' for the action_tbl_scope field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_ACTION_TBL_SCOPE \
+ UINT32_C(0x200)
+ /* This bit must be '1' for the lkup_ctx_id field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_CTX_ID \
+ UINT32_C(0x400)
+ /* This bit must be '1' for the lkup_tbl_scope field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_TBL_SCOPE \
+ UINT32_C(0x800)
+ /* This bit must be '1' for the lkup_static_buckets field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_STATIC_BUCKETS \
+ UINT32_C(0x1000)
+ /* This bit must be '1' for the lkup_dynamic_buckets field is set. */
+ #define HWRM_TF_EXT_EM_QCFG_OUTPUT_SUPPORTED_LKUP_DYNAMIC_BUCKETS \
+ UINT32_C(0x2000)
/*
- * This field represents the identifier of L4 destination port
- * used for the given tunnel type. This field is valid for
- * specific tunnel types that use layer 4 (e.g. UDP)
- * transports for tunneling.
+ * Group id is used by firmware to identify memory pools belonging
+ * to certain group.
*/
- uint16_t tunnel_dst_port_id;
+ uint16_t group_id;
+ /* EEM pending cache flush interval in 1/10th of second. */
+ uint8_t flush_interval;
+ /* unused. */
+ uint8_t unused1;
+ /* Context id of action table scope. */
+ uint16_t action_ctx_id;
+ /* Table scope id used for action record entries. */
+ uint16_t action_tbl_scope;
+ /* Context id of lookup table scope. */
+ uint16_t lkup_ctx_id;
+ /* Table scope id used for EM lookup entries. */
+ uint16_t lkup_tbl_scope;
+ /*
+ * Number of 32B static buckets to be allocated at the beginning
+ * of table scope.
+ */
+ uint32_t lkup_static_buckets;
+ /* Number of 32B dynamic buckets to be allocated. */
+ uint32_t lkup_dynamic_buckets;
+ /* unused. */
+ uint8_t unused2[3];
/*
- * This field represents the value of L4 destination port
- * identified by tunnel_dst_port_id. This field is valid for
- * specific tunnel types that use layer 4 (e.g. UDP)
- * transports for tunneling.
- * This field is in network byte order.
- *
- * A value of 0 means that the destination port is not
- * configured.
- */
- uint16_t tunnel_dst_port_val;
- uint8_t unused_0[3];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/******************************
- * hwrm_tunnel_dst_port_alloc *
- ******************************/
+/*********************
+ * hwrm_tf_em_insert *
+ *********************/
-/* hwrm_tunnel_dst_port_alloc_input (size:192b/24B) */
-struct hwrm_tunnel_dst_port_alloc_input {
+/* hwrm_tf_em_insert_input (size:832b/104B) */
+struct hwrm_tf_em_insert_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39548,45 +42031,34 @@ struct hwrm_tunnel_dst_port_alloc_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_LAST \
- HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6
- uint8_t unused_0;
- /*
- * This field represents the value of L4 destination port used
- * for the given tunnel type. This field is valid for
- * specific tunnel types that use layer 4 (e.g. UDP)
- * transports for tunneling.
- *
- * This field is in network byte order.
- *
- * A value of 0 shall fail the command.
- */
- uint16_t tunnel_dst_port_val;
- uint8_t unused_1[4];
+ /* Firmware Session Id. */
+ uint32_t fw_session_id;
+ /* Control Flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EM_INSERT_INPUT_FLAGS_DIR_TX
+ /* Reported match strength. */
+ uint16_t strength;
+ /* Index to action. */
+ uint32_t action_ptr;
+ /* Index of EM record. */
+ uint32_t em_record_idx;
+ /* EM Key value. */
+ uint64_t em_key[8];
+ /* Number of bits in em_key. */
+ uint16_t em_key_bitlen;
+ /* unused. */
+ uint16_t unused0[3];
} __rte_packed;
-/* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */
-struct hwrm_tunnel_dst_port_alloc_output {
+/* hwrm_tf_em_insert_output (size:128b/16B) */
+struct hwrm_tf_em_insert_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39595,29 +42067,23 @@ struct hwrm_tunnel_dst_port_alloc_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * Identifier of a tunnel L4 destination port value. Only applies to tunnel
- * types that has l4 destination port parameters.
- */
- uint16_t tunnel_dst_port_id;
- uint8_t unused_0[5];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
+ /* EM record pointer index. */
+ uint16_t rptr_index;
+ /* EM record offset 0~3. */
+ uint8_t rptr_entry;
+ /* Number of word entries consumed by the key. */
+ uint8_t num_of_entries;
+ /* unused. */
+ uint32_t unused0;
} __rte_packed;
-/*****************************
- * hwrm_tunnel_dst_port_free *
- *****************************/
+/*********************
+ * hwrm_tf_em_delete *
+ *********************/
-/* hwrm_tunnel_dst_port_free_input (size:192b/24B) */
-struct hwrm_tunnel_dst_port_free_input {
+/* hwrm_tf_em_delete_input (size:832b/104B) */
+struct hwrm_tf_em_delete_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39646,39 +42112,32 @@ struct hwrm_tunnel_dst_port_free_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Tunnel Type. */
- uint8_t tunnel_type;
- /* Virtual eXtensible Local Area Network (VXLAN) */
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN \
- UINT32_C(0x1)
- /* Generic Network Virtualization Encapsulation (Geneve) */
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE \
- UINT32_C(0x5)
- /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
- UINT32_C(0x9)
- /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
- UINT32_C(0xa)
- /* Use fixed layer 2 ether type of 0xFFFF */
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_L2_ETYPE \
- UINT32_C(0xb)
- /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
- UINT32_C(0xc)
- #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_LAST \
- HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6
- uint8_t unused_0;
- /*
- * Identifier of a tunnel L4 destination port value. Only applies to tunnel
- * types that has l4 destination port parameters.
- */
- uint16_t tunnel_dst_port_id;
- uint8_t unused_1[4];
+ /* Session Id. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_EM_DELETE_INPUT_FLAGS_DIR_TX
+ /* Unused0 */
+ uint16_t unused0;
+ /* EM internal flow hanndle. */
+ uint64_t flow_handle;
+ /* EM Key value */
+ uint64_t em_key[8];
+ /* Number of bits in em_key. */
+ uint16_t em_key_bitlen;
+ /* unused. */
+ uint16_t unused1[3];
} __rte_packed;
-/* hwrm_tunnel_dst_port_free_output (size:128b/16B) */
-struct hwrm_tunnel_dst_port_free_output {
+/* hwrm_tf_em_delete_output (size:128b/16B) */
+struct hwrm_tf_em_delete_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39687,166 +42146,19 @@ struct hwrm_tunnel_dst_port_free_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_1[7];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __rte_packed;
-
-/* Periodic statistics context DMA to host. */
-/* ctx_hw_stats (size:1280b/160B) */
-struct ctx_hw_stats {
- /* Number of received unicast packets */
- uint64_t rx_ucast_pkts;
- /* Number of received multicast packets */
- uint64_t rx_mcast_pkts;
- /* Number of received broadcast packets */
- uint64_t rx_bcast_pkts;
- /* Number of discarded packets on receive path */
- uint64_t rx_discard_pkts;
- /* Number of packets on receive path with error */
- uint64_t rx_error_pkts;
- /* Number of received bytes for unicast traffic */
- uint64_t rx_ucast_bytes;
- /* Number of received bytes for multicast traffic */
- uint64_t rx_mcast_bytes;
- /* Number of received bytes for broadcast traffic */
- uint64_t rx_bcast_bytes;
- /* Number of transmitted unicast packets */
- uint64_t tx_ucast_pkts;
- /* Number of transmitted multicast packets */
- uint64_t tx_mcast_pkts;
- /* Number of transmitted broadcast packets */
- uint64_t tx_bcast_pkts;
- /* Number of packets on transmit path with error */
- uint64_t tx_error_pkts;
- /* Number of discarded packets on transmit path */
- uint64_t tx_discard_pkts;
- /* Number of transmitted bytes for unicast traffic */
- uint64_t tx_ucast_bytes;
- /* Number of transmitted bytes for multicast traffic */
- uint64_t tx_mcast_bytes;
- /* Number of transmitted bytes for broadcast traffic */
- uint64_t tx_bcast_bytes;
- /* Number of TPA packets */
- uint64_t tpa_pkts;
- /* Number of TPA bytes */
- uint64_t tpa_bytes;
- /* Number of TPA events */
- uint64_t tpa_events;
- /* Number of TPA aborts */
- uint64_t tpa_aborts;
-} __rte_packed;
-
-/*
- * Extended periodic statistics context DMA to host. On cards that
- * support TPA v2, additional TPA related stats exist and can be retrieved
- * by DMA of ctx_hw_stats_ext, rather than legacy ctx_hw_stats structure.
- */
-/* ctx_hw_stats_ext (size:1344b/168B) */
-struct ctx_hw_stats_ext {
- /* Number of received unicast packets */
- uint64_t rx_ucast_pkts;
- /* Number of received multicast packets */
- uint64_t rx_mcast_pkts;
- /* Number of received broadcast packets */
- uint64_t rx_bcast_pkts;
- /* Number of discarded packets on receive path */
- uint64_t rx_discard_pkts;
- /* Number of packets on receive path with error */
- uint64_t rx_error_pkts;
- /* Number of received bytes for unicast traffic */
- uint64_t rx_ucast_bytes;
- /* Number of received bytes for multicast traffic */
- uint64_t rx_mcast_bytes;
- /* Number of received bytes for broadcast traffic */
- uint64_t rx_bcast_bytes;
- /* Number of transmitted unicast packets */
- uint64_t tx_ucast_pkts;
- /* Number of transmitted multicast packets */
- uint64_t tx_mcast_pkts;
- /* Number of transmitted broadcast packets */
- uint64_t tx_bcast_pkts;
- /* Number of packets on transmit path with error */
- uint64_t tx_error_pkts;
- /* Number of discarded packets on transmit path */
- uint64_t tx_discard_pkts;
- /* Number of transmitted bytes for unicast traffic */
- uint64_t tx_ucast_bytes;
- /* Number of transmitted bytes for multicast traffic */
- uint64_t tx_mcast_bytes;
- /* Number of transmitted bytes for broadcast traffic */
- uint64_t tx_bcast_bytes;
- /* Number of TPA eligible packets */
- uint64_t rx_tpa_eligible_pkt;
- /* Number of TPA eligible bytes */
- uint64_t rx_tpa_eligible_bytes;
- /* Number of TPA packets */
- uint64_t rx_tpa_pkt;
- /* Number of TPA bytes */
- uint64_t rx_tpa_bytes;
- /* Number of TPA errors */
- uint64_t rx_tpa_errors;
-} __rte_packed;
-
-/* Periodic Engine statistics context DMA to host. */
-/* ctx_eng_stats (size:512b/64B) */
-struct ctx_eng_stats {
- /*
- * Count of data bytes into the Engine.
- * This includes any user supplied prefix,
- * but does not include any predefined
- * prefix data.
- */
- uint64_t eng_bytes_in;
- /* Count of data bytes out of the Engine. */
- uint64_t eng_bytes_out;
- /*
- * Count, in 4-byte (dword) units, of bytes
- * that are input as auxiliary data.
- * This includes the aux_cmd data.
- */
- uint64_t aux_bytes_in;
- /*
- * Count, in 4-byte (dword) units, of bytes
- * that are output as auxiliary data.
- * This count is the buffer space for aux_data
- * output provided in the RQE, not the actual
- * aux_data written
- */
- uint64_t aux_bytes_out;
- /* Count of number of commands executed. */
- uint64_t commands;
- /*
- * Count of number of error commands.
- * These are the commands with a
- * non-zero status value.
- */
- uint64_t error_commands;
- /*
- * Compression/Encryption Engine usage,
- * the unit is count of clock cycles
- */
- uint64_t cce_engine_usage;
- /*
- * De-Compression/De-cryption Engine usage,
- * the unit is count of clock cycles
- */
- uint64_t cdd_engine_usage;
+ /* Original stack allocation index. */
+ uint16_t em_index;
+ /* unused. */
+ uint16_t unused0[3];
} __rte_packed;
-/***********************
- * hwrm_stat_ctx_alloc *
- ***********************/
+/********************
+ * hwrm_tf_tcam_set *
+ ********************/
-/* hwrm_stat_ctx_alloc_input (size:256b/32B) */
-struct hwrm_stat_ctx_alloc_input {
+/* hwrm_tf_tcam_set_input (size:1024b/128B) */
+struct hwrm_tf_tcam_set_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39875,51 +42187,52 @@ struct hwrm_stat_ctx_alloc_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TCAM_SET_INPUT_FLAGS_DIR_TX
/*
- * This is the address for statistic block.
- * > For new versions of the chip, this address should be 128B
- * > aligned.
- */
- uint64_t stats_dma_addr;
- /*
- * The statistic block update period in ms.
- * e.g. 250ms, 500ms, 750ms, 1000ms.
- * If update_period_ms is 0, then the stats update
- * shall be never done and the DMA address shall not be used.
- * In this case, the stat block can only be read by
- * hwrm_stat_ctx_query command.
- * On Ethernet/L2 based devices:
- * if tpa v2 supported (hwrm_vnic_qcaps[max_aggs_supported]>0),
- * ctx_hw_stats_ext is used for DMA,
- * else
- * ctx_hw_stats is used for DMA.
+ * Indicate device data is being sent via DMA, the device
+ * data is packing does not change.
*/
- uint32_t update_period_ms;
+ #define HWRM_TF_TCAM_SET_INPUT_FLAGS_DMA UINT32_C(0x2)
/*
- * This field is used to specify statistics context specific
- * configuration flags.
+ * TCAM type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
*/
- uint8_t stat_ctx_flags;
+ uint32_t type;
+ /* Index of TCAM entry. */
+ uint16_t idx;
+ /* Number of bytes in the TCAM key. */
+ uint8_t key_size;
+ /* Number of bytes in the TCAM result. */
+ uint8_t result_size;
/*
- * When this bit is set to '1', the statistics context shall be
- * allocated for RoCE traffic only. In this case, traffic other
- * than offloaded RoCE traffic shall not be included in this
- * statistic context.
- * When this bit is set to '0', the statistics context shall be
- * used for network traffic or engine traffic.
+ * Offset from which the mask bytes start in the device data
+ * array, key offset is always 0.
*/
- #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1)
- uint8_t unused_0;
+ uint8_t mask_offset;
+ /* Offset from which the result bytes start in the device data array. */
+ uint8_t result_offset;
+ /* unused. */
+ uint8_t unused0[6];
/*
- * This is the size of the structure (ctx_hw_stats or
- * ctx_hw_stats_ext) that the driver has allocated to be used
- * for the periodic DMA updates.
+ * TCAM key located at offset 0, mask located at mask_offsec
+ * and result at result_offsec for the device.
*/
- uint16_t stats_dma_length;
+ uint8_t dev_data[88];
} __rte_packed;
-/* hwrm_stat_ctx_alloc_output (size:128b/16B) */
-struct hwrm_stat_ctx_alloc_output {
+/* hwrm_tf_tcam_set_output (size:128b/16B) */
+struct hwrm_tf_tcam_set_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39928,26 +42241,26 @@ struct hwrm_stat_ctx_alloc_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This is the statistics context ID value. */
- uint32_t stat_ctx_id;
- uint8_t unused_0[3];
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/**********************
- * hwrm_stat_ctx_free *
- **********************/
+/********************
+ * hwrm_tf_tcam_get *
+ ********************/
-/* hwrm_stat_ctx_free_input (size:192b/24B) */
-struct hwrm_stat_ctx_free_input {
+/* hwrm_tf_tcam_get_input (size:256b/32B) */
+struct hwrm_tf_tcam_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -39976,13 +42289,31 @@ struct hwrm_stat_ctx_free_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* ID of the statistics context that is being queried. */
- uint32_t stat_ctx_id;
- uint8_t unused_0[4];
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TCAM_GET_INPUT_FLAGS_DIR_TX
+ /*
+ * TCAM type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
+ */
+ uint32_t type;
+ /* Index of a TCAM entry. */
+ uint16_t idx;
+ /* unused. */
+ uint16_t unused0;
} __rte_packed;
-/* hwrm_stat_ctx_free_output (size:128b/16B) */
-struct hwrm_stat_ctx_free_output {
+/* hwrm_tf_tcam_get_output (size:2368b/296B) */
+struct hwrm_tf_tcam_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -39991,26 +42322,41 @@ struct hwrm_stat_ctx_free_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* This is the statistics context ID value. */
- uint32_t stat_ctx_id;
- uint8_t unused_0[3];
+ /* Number of bytes in the TCAM key. */
+ uint8_t key_size;
+ /* Number of bytes in the TCAM entry. */
+ uint8_t result_size;
+ /* Offset from which the mask bytes start in the device data array. */
+ uint8_t mask_offset;
+ /* Offset from which the result bytes start in the device data array. */
+ uint8_t result_offset;
+ /* unused. */
+ uint8_t unused0[4];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * TCAM key located at offset 0, mask located at mask_offsec
+ * and result at result_offsec for the device.
+ */
+ uint8_t dev_data[272];
+ /* unused. */
+ uint8_t unused1[7];
+ /*
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/***********************
- * hwrm_stat_ctx_query *
- ***********************/
+/*********************
+ * hwrm_tf_tcam_move *
+ *********************/
-/* hwrm_stat_ctx_query_input (size:192b/24B) */
-struct hwrm_stat_ctx_query_input {
+/* hwrm_tf_tcam_move_input (size:1024b/128B) */
+struct hwrm_tf_tcam_move_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40039,20 +42385,33 @@ struct hwrm_stat_ctx_query_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* ID of the statistics context that is being queried. */
- uint32_t stat_ctx_id;
- uint8_t flags;
- /*
- * This bit is set to 1 when request is for a counter mask,
- * representing the width of each of the stats counters, rather
- * than counters themselves.
- */
- #define HWRM_STAT_CTX_QUERY_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
- uint8_t unused_0[3];
-} __rte_packed;
-
-/* hwrm_stat_ctx_query_output (size:1408b/176B) */
-struct hwrm_stat_ctx_query_output {
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TCAM_MOVE_INPUT_FLAGS_DIR_TX
+ /*
+ * TCAM type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
+ */
+ uint32_t type;
+ /* Number of TCAM index pairs to be swapped for the device. */
+ uint16_t count;
+ /* unused. */
+ uint16_t unused0;
+ /* TCAM index pairs to be swapped for the device. */
+ uint16_t idx_pairs[48];
+} __rte_packed;
+
+/* hwrm_tf_tcam_move_output (size:128b/16B) */
+struct hwrm_tf_tcam_move_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40061,64 +42420,26 @@ struct hwrm_stat_ctx_query_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Number of transmitted unicast packets */
- uint64_t tx_ucast_pkts;
- /* Number of transmitted multicast packets */
- uint64_t tx_mcast_pkts;
- /* Number of transmitted broadcast packets */
- uint64_t tx_bcast_pkts;
- /* Number of transmitted packets with error */
- uint64_t tx_err_pkts;
- /* Number of dropped packets on transmit path */
- uint64_t tx_drop_pkts;
- /* Number of transmitted bytes for unicast traffic */
- uint64_t tx_ucast_bytes;
- /* Number of transmitted bytes for multicast traffic */
- uint64_t tx_mcast_bytes;
- /* Number of transmitted bytes for broadcast traffic */
- uint64_t tx_bcast_bytes;
- /* Number of received unicast packets */
- uint64_t rx_ucast_pkts;
- /* Number of received multicast packets */
- uint64_t rx_mcast_pkts;
- /* Number of received broadcast packets */
- uint64_t rx_bcast_pkts;
- /* Number of received packets with error */
- uint64_t rx_err_pkts;
- /* Number of dropped packets on receive path */
- uint64_t rx_drop_pkts;
- /* Number of received bytes for unicast traffic */
- uint64_t rx_ucast_bytes;
- /* Number of received bytes for multicast traffic */
- uint64_t rx_mcast_bytes;
- /* Number of received bytes for broadcast traffic */
- uint64_t rx_bcast_bytes;
- /* Number of aggregated unicast packets */
- uint64_t rx_agg_pkts;
- /* Number of aggregated unicast bytes */
- uint64_t rx_agg_bytes;
- /* Number of aggregation events */
- uint64_t rx_agg_events;
- /* Number of aborted aggregations */
- uint64_t rx_agg_aborts;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/***************************
- * hwrm_stat_ext_ctx_query *
- ***************************/
+/*********************
+ * hwrm_tf_tcam_free *
+ *********************/
-/* hwrm_stat_ext_ctx_query_input (size:192b/24B) */
-struct hwrm_stat_ext_ctx_query_input {
+/* hwrm_tf_tcam_free_input (size:1024b/128B) */
+struct hwrm_tf_tcam_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40147,21 +42468,33 @@ struct hwrm_stat_ext_ctx_query_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* ID of the extended statistics context that is being queried. */
- uint32_t stat_ctx_id;
- uint8_t flags;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TCAM_FREE_INPUT_FLAGS_DIR_TX
/*
- * This bit is set to 1 when request is for a counter mask,
- * representing the width of each of the stats counters, rather
- * than counters themselves.
+ * TCAM type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
*/
- #define HWRM_STAT_EXT_CTX_QUERY_INPUT_FLAGS_COUNTER_MASK \
- UINT32_C(0x1)
- uint8_t unused_0[3];
+ uint32_t type;
+ /* Number of TCAM index to be deleted for the device. */
+ uint16_t count;
+ /* unused. */
+ uint16_t unused0;
+ /* TCAM index list to be deleted for the device. */
+ uint16_t idx_list[48];
} __rte_packed;
-/* hwrm_stat_ext_ctx_query_output (size:1472b/184B) */
-struct hwrm_stat_ext_ctx_query_output {
+/* hwrm_tf_tcam_free_output (size:128b/16B) */
+struct hwrm_tf_tcam_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40170,66 +42503,26 @@ struct hwrm_stat_ext_ctx_query_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Number of received unicast packets */
- uint64_t rx_ucast_pkts;
- /* Number of received multicast packets */
- uint64_t rx_mcast_pkts;
- /* Number of received broadcast packets */
- uint64_t rx_bcast_pkts;
- /* Number of discarded packets on receive path */
- uint64_t rx_discard_pkts;
- /* Number of packets on receive path with error */
- uint64_t rx_error_pkts;
- /* Number of received bytes for unicast traffic */
- uint64_t rx_ucast_bytes;
- /* Number of received bytes for multicast traffic */
- uint64_t rx_mcast_bytes;
- /* Number of received bytes for broadcast traffic */
- uint64_t rx_bcast_bytes;
- /* Number of transmitted unicast packets */
- uint64_t tx_ucast_pkts;
- /* Number of transmitted multicast packets */
- uint64_t tx_mcast_pkts;
- /* Number of transmitted broadcast packets */
- uint64_t tx_bcast_pkts;
- /* Number of packets on transmit path with error */
- uint64_t tx_error_pkts;
- /* Number of discarded packets on transmit path */
- uint64_t tx_discard_pkts;
- /* Number of transmitted bytes for unicast traffic */
- uint64_t tx_ucast_bytes;
- /* Number of transmitted bytes for multicast traffic */
- uint64_t tx_mcast_bytes;
- /* Number of transmitted bytes for broadcast traffic */
- uint64_t tx_bcast_bytes;
- /* Number of TPA eligible packets */
- uint64_t rx_tpa_eligible_pkt;
- /* Number of TPA eligible bytes */
- uint64_t rx_tpa_eligible_bytes;
- /* Number of TPA packets */
- uint64_t rx_tpa_pkt;
- /* Number of TPA bytes */
- uint64_t rx_tpa_bytes;
- /* Number of TPA errors */
- uint64_t rx_tpa_errors;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/***************************
- * hwrm_stat_ctx_eng_query *
- ***************************/
+/**************************
+ * hwrm_tf_global_cfg_set *
+ **************************/
-/* hwrm_stat_ctx_eng_query_input (size:192b/24B) */
-struct hwrm_stat_ctx_eng_query_input {
+/* hwrm_tf_global_cfg_set_input (size:448b/56B) */
+struct hwrm_tf_global_cfg_set_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40258,13 +42551,34 @@ struct hwrm_stat_ctx_eng_query_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* ID of the statistics context that is being queried. */
- uint32_t stat_ctx_id;
- uint8_t unused_0[4];
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_GLOBAL_CFG_SET_INPUT_FLAGS_DIR_TX
+ /* Global Cfg type */
+ uint32_t type;
+ /* Offset of the type */
+ uint32_t offset;
+ /* Size of the data to set in bytes */
+ uint16_t size;
+ /* unused. */
+ uint8_t unused0[6];
+ /* Data to set */
+ uint8_t data[8];
+ /* Mask of data to set, 0 indicates no mask */
+ uint8_t mask[8];
} __rte_packed;
-/* hwrm_stat_ctx_eng_query_output (size:640b/80B) */
-struct hwrm_stat_ctx_eng_query_output {
+/* hwrm_tf_global_cfg_set_output (size:128b/16B) */
+struct hwrm_tf_global_cfg_set_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40273,65 +42587,26 @@ struct hwrm_stat_ctx_eng_query_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* unused. */
+ uint8_t unused0[7];
/*
- * Count of data bytes into the Engine.
- * This includes any user supplied prefix,
- * but does not include any predefined
- * prefix data.
- */
- uint64_t eng_bytes_in;
- /* Count of data bytes out of the Engine. */
- uint64_t eng_bytes_out;
- /*
- * Count, in 4-byte (dword) units, of bytes
- * that are input as auxiliary data.
- * This includes the aux_cmd data.
- */
- uint64_t aux_bytes_in;
- /*
- * Count, in 4-byte (dword) units, of bytes
- * that are output as auxiliary data.
- * This count is the buffer space for aux_data
- * output provided in the RQE, not the actual
- * aux_data written
- */
- uint64_t aux_bytes_out;
- /* Count of number of commands executed. */
- uint64_t commands;
- /*
- * Count of number of error commands.
- * These are the commands with a
- * non-zero status value.
- */
- uint64_t error_commands;
- /*
- * Compression/Encryption Engine usage,
- * the unit is count of clock cycles
- */
- uint64_t cce_engine_usage;
- /*
- * De-Compression/De-cryption Engine usage,
- * the unit is count of clock cycles
- */
- uint64_t cdd_engine_usage;
- uint8_t unused_0[7];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * This field is used in Output records to indicate that the
+ * output is completely written to RAM. This field should be
+ * read as '1' to indicate that the output has been
+ * completely written. When writing a command completion or
+ * response to an internal processor, the order of writes has
+ * to be such that this field is written last.
*/
uint8_t valid;
} __rte_packed;
-/***************************
- * hwrm_stat_ctx_clr_stats *
- ***************************/
+/**************************
+ * hwrm_tf_global_cfg_get *
+ **************************/
-/* hwrm_stat_ctx_clr_stats_input (size:192b/24B) */
-struct hwrm_stat_ctx_clr_stats_input {
+/* hwrm_tf_global_cfg_get_input (size:320b/40B) */
+struct hwrm_tf_global_cfg_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40360,13 +42635,30 @@ struct hwrm_stat_ctx_clr_stats_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* ID of the statistics context that is being queried. */
- uint32_t stat_ctx_id;
- uint8_t unused_0[4];
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint32_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_GLOBAL_CFG_GET_INPUT_FLAGS_DIR_TX
+ /* Global Cfg type */
+ uint32_t type;
+ /* Offset of the type */
+ uint32_t offset;
+ /* Size of the data to set in bytes */
+ uint16_t size;
+ /* unused. */
+ uint8_t unused0[6];
} __rte_packed;
-/* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */
-struct hwrm_stat_ctx_clr_stats_output {
+/* hwrm_tf_global_cfg_get_output (size:256b/32B) */
+struct hwrm_tf_global_cfg_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40375,24 +42667,21 @@ struct hwrm_stat_ctx_clr_stats_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
+ /* Size of the data read in bytes */
+ uint16_t size;
+ /* unused. */
+ uint8_t unused0[6];
+ /* Data to set */
+ uint8_t data[16];
} __rte_packed;
-/********************
- * hwrm_pcie_qstats *
- ********************/
+/**********************
+ * hwrm_tf_if_tbl_get *
+ **********************/
-/* hwrm_pcie_qstats_input (size:256b/32B) */
-struct hwrm_pcie_qstats_input {
+/* hwrm_tf_if_tbl_get_input (size:256b/32B) */
+struct hwrm_tf_if_tbl_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40421,22 +42710,31 @@ struct hwrm_pcie_qstats_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_IF_TBL_GET_INPUT_FLAGS_DIR_TX
+ /* Size of the data to set. */
+ uint16_t size;
/*
- * The size of PCIe statistics block in bytes.
- * Firmware will DMA the PCIe statistics to
- * the host with this field size in the response.
- */
- uint16_t pcie_stat_size;
- uint8_t unused_0[6];
- /*
- * This is the host address where
- * PCIe statistics will be stored
+ * Type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
*/
- uint64_t pcie_stat_host_addr;
+ uint32_t type;
+ /* Index of the type to retrieve. */
+ uint32_t index;
} __rte_packed;
-/* hwrm_pcie_qstats_output (size:128b/16B) */
-struct hwrm_pcie_qstats_output {
+/* hwrm_tf_if_tbl_get_output (size:256b/32B) */
+struct hwrm_tf_if_tbl_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40445,62 +42743,34 @@ struct hwrm_pcie_qstats_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* The size of PCIe statistics block in bytes. */
- uint16_t pcie_stat_size;
- uint8_t unused_0[5];
+ /* Response code. */
+ uint32_t resp_code;
+ /* Response size. */
+ uint16_t size;
+ /* unused */
+ uint16_t unused0;
+ /* Response data. */
+ uint8_t data[8];
+ /* unused */
+ uint8_t unused1[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
} __rte_packed;
-/* PCIe Statistics Formats */
-/* pcie_ctx_hw_stats (size:768b/96B) */
-struct pcie_ctx_hw_stats {
- /* Number of physical layer receiver errors */
- uint64_t pcie_pl_signal_integrity;
- /* Number of DLLP CRC errors detected by Data Link Layer */
- uint64_t pcie_dl_signal_integrity;
- /*
- * Number of TLP LCRC and sequence number errors detected
- * by Data Link Layer
- */
- uint64_t pcie_tl_signal_integrity;
- /* Number of times LTSSM entered Recovery state */
- uint64_t pcie_link_integrity;
- /* Report number of TLP bits that have been transmitted in Mbps */
- uint64_t pcie_tx_traffic_rate;
- /* Report number of TLP bits that have been received in Mbps */
- uint64_t pcie_rx_traffic_rate;
- /* Number of DLLP bytes that have been transmitted */
- uint64_t pcie_tx_dllp_statistics;
- /* Number of DLLP bytes that have been received */
- uint64_t pcie_rx_dllp_statistics;
- /*
- * Number of times spent in each phase of gen3
- * equalization
- */
- uint64_t pcie_equalization_time;
- /* Records the last 16 transitions of the LTSSM */
- uint32_t pcie_ltssm_histogram[4];
- /*
- * Record the last 8 reasons on why LTSSM transitioned
- * to Recovery
- */
- uint64_t pcie_recovery_histogram;
-} __rte_packed;
-
-/**********************
- * hwrm_exec_fwd_resp *
- **********************/
+/***************************
+ * hwrm_tf_if_tbl_type_set *
+ ***************************/
-/* hwrm_exec_fwd_resp_input (size:1024b/128B) */
-struct hwrm_exec_fwd_resp_input {
+/* hwrm_tf_if_tbl_set_input (size:384b/48B) */
+struct hwrm_tf_if_tbl_set_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40529,26 +42799,37 @@ struct hwrm_exec_fwd_resp_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_IF_TBL_SET_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint8_t unused0[2];
/*
- * This is an encapsulated request. This request should
- * be executed by the HWRM and the response should be
- * provided in the response buffer inside the encapsulated
- * request.
- */
- uint32_t encap_request[26];
- /*
- * This value indicates the target id of the response to
- * the encapsulated request.
- * 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors
- * 0xFFFF - HWRM
+ * Type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
*/
- uint16_t encap_resp_target_id;
- uint8_t unused_0[6];
+ uint32_t type;
+ /* Index of the type to set. */
+ uint32_t index;
+ /* Size of the data to set. */
+ uint16_t size;
+ /* unused */
+ uint8_t unused1[6];
+ /* Data to be set. */
+ uint8_t data[8];
} __rte_packed;
-/* hwrm_exec_fwd_resp_output (size:128b/16B) */
-struct hwrm_exec_fwd_resp_output {
+/* hwrm_tf_if_tbl_set_output (size:128b/16B) */
+struct hwrm_tf_if_tbl_set_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40557,24 +42838,26 @@ struct hwrm_exec_fwd_resp_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* unused. */
+ uint8_t unused0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
} __rte_packed;
-/************************
- * hwrm_reject_fwd_resp *
- ************************/
+/*****************************
+ * hwrm_tf_tbl_type_bulk_get *
+ *****************************/
-/* hwrm_reject_fwd_resp_input (size:1024b/128B) */
-struct hwrm_reject_fwd_resp_input {
+/* hwrm_tf_tbl_type_bulk_get_input (size:384b/48B) */
+struct hwrm_tf_tbl_type_bulk_get_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40603,26 +42886,37 @@ struct hwrm_reject_fwd_resp_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Firmware session id returned when HWRM_TF_SESSION_OPEN is sent. */
+ uint32_t fw_session_id;
+ /* Control flags. */
+ uint16_t flags;
+ /* Indicates the flow direction. */
+ #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR UINT32_C(0x1)
+ /* If this bit set to 0, then it indicates rx flow. */
+ #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_RX UINT32_C(0x0)
+ /* If this bit is set to 1, then it indicates that tx flow. */
+ #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_TX UINT32_C(0x1)
+ #define HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_LAST \
+ HWRM_TF_TBL_TYPE_BULK_GET_INPUT_FLAGS_DIR_TX
+ /* unused. */
+ uint8_t unused0[2];
/*
- * This is an encapsulated request. This request should
- * be rejected by the HWRM and the error response should be
- * provided in the response buffer inside the encapsulated
- * request.
+ * Type of the resource, defined globally in the
+ * hwrm_tf_resc_type enum.
*/
- uint32_t encap_request[26];
- /*
- * This value indicates the target id of the response to
- * the encapsulated request.
- * 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors
- * 0xFFFF - HWRM
- */
- uint16_t encap_resp_target_id;
- uint8_t unused_0[6];
+ uint32_t type;
+ /* Starting index of the type to retrieve. */
+ uint32_t start_index;
+ /* Number of entries to retrieve. */
+ uint32_t num_entries;
+ /* Number of entries to retrieve. */
+ uint32_t unused1;
+ /* Host memory where data will be stored. */
+ uint64_t host_addr;
} __rte_packed;
-/* hwrm_reject_fwd_resp_output (size:128b/16B) */
-struct hwrm_reject_fwd_resp_output {
+/* hwrm_tf_tbl_type_bulk_get_output (size:128b/16B) */
+struct hwrm_tf_tbl_type_bulk_get_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40631,24 +42925,30 @@ struct hwrm_reject_fwd_resp_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* Response code. */
+ uint32_t resp_code;
+ /* Response size. */
+ uint16_t size;
+ /* unused */
+ uint8_t unused0;
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * When writing a command completion or response to an internal
+ * processor, the order of writes has to be such that this field
+ * is written last.
*/
uint8_t valid;
} __rte_packed;
-/*****************
- * hwrm_fwd_resp *
- *****************/
+/******************************
+ * hwrm_tunnel_dst_port_query *
+ ******************************/
-/* hwrm_fwd_resp_input (size:1024b/128B) */
-struct hwrm_fwd_resp_input {
+/* hwrm_tunnel_dst_port_query_input (size:192b/24B) */
+struct hwrm_tunnel_dst_port_query_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40677,41 +42977,33 @@ struct hwrm_fwd_resp_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * This value indicates the target id of the encapsulated
- * response.
- * 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors
- * 0xFFFF - HWRM
- */
- uint16_t encap_resp_target_id;
- /*
- * This value indicates the completion ring the encapsulated
- * response will be optionally completed on. If the value is
- * -1, then no CR completion shall be generated for the
- * encapsulated response. Any other value must be a
- * valid CR ring_id value. If a valid encap_resp_cmpl_ring
- * is provided, then a CR completion shall be generated for
- * the encapsulated response.
- */
- uint16_t encap_resp_cmpl_ring;
- /* This field indicates the length of encapsulated response. */
- uint16_t encap_resp_len;
- uint8_t unused_0;
- uint8_t unused_1;
- /*
- * This is the host address where the encapsulated response
- * will be written.
- * This area must be 16B aligned and must be cleared to zero
- * before the original request is made.
- */
- uint64_t encap_resp_addr;
- /* This is an encapsulated response. */
- uint32_t encap_resp[24];
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ #define HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_TUNNEL_DST_PORT_QUERY_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6
+ uint8_t unused_0[7];
} __rte_packed;
-/* hwrm_fwd_resp_output (size:128b/16B) */
-struct hwrm_fwd_resp_output {
+/* hwrm_tunnel_dst_port_query_output (size:128b/16B) */
+struct hwrm_tunnel_dst_port_query_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40720,7 +43012,25 @@ struct hwrm_fwd_resp_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /*
+ * This field represents the identifier of L4 destination port
+ * used for the given tunnel type. This field is valid for
+ * specific tunnel types that use layer 4 (e.g. UDP)
+ * transports for tunneling.
+ */
+ uint16_t tunnel_dst_port_id;
+ /*
+ * This field represents the value of L4 destination port
+ * identified by tunnel_dst_port_id. This field is valid for
+ * specific tunnel types that use layer 4 (e.g. UDP)
+ * transports for tunneling.
+ * This field is in network byte order.
+ *
+ * A value of 0 means that the destination port is not
+ * configured.
+ */
+ uint16_t tunnel_dst_port_val;
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -40731,13 +43041,13 @@ struct hwrm_fwd_resp_output {
uint8_t valid;
} __rte_packed;
-/*****************************
- * hwrm_fwd_async_event_cmpl *
- *****************************/
+/******************************
+ * hwrm_tunnel_dst_port_alloc *
+ ******************************/
-/* hwrm_fwd_async_event_cmpl_input (size:320b/40B) */
-struct hwrm_fwd_async_event_cmpl_input {
+/* hwrm_tunnel_dst_port_alloc_input (size:192b/24B) */
+struct hwrm_tunnel_dst_port_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40766,22 +43076,45 @@ struct hwrm_fwd_async_event_cmpl_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ #define HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_TUNNEL_DST_PORT_ALLOC_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6
+ uint8_t unused_0;
/*
- * This value indicates the target id of the encapsulated
- * asynchronous event.
- * 0x0 - 0xFFF8 - Used for function ids
- * 0xFFF8 - 0xFFFE - Reserved for internal processors
- * 0xFFFF - Broadcast to all children VFs (only applicable when
- * a PF is the requester)
+ * This field represents the value of L4 destination port used
+ * for the given tunnel type. This field is valid for
+ * specific tunnel types that use layer 4 (e.g. UDP)
+ * transports for tunneling.
+ *
+ * This field is in network byte order.
+ *
+ * A value of 0 shall fail the command.
*/
- uint16_t encap_async_event_target_id;
- uint8_t unused_0[6];
- /* This is an encapsulated asynchronous event completion. */
- uint32_t encap_async_event_cmpl[4];
+ uint16_t tunnel_dst_port_val;
+ uint8_t unused_1[4];
} __rte_packed;
-/* hwrm_fwd_async_event_cmpl_output (size:128b/16B) */
-struct hwrm_fwd_async_event_cmpl_output {
+/* hwrm_tunnel_dst_port_alloc_output (size:128b/16B) */
+struct hwrm_tunnel_dst_port_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40790,7 +43123,12 @@ struct hwrm_fwd_async_event_cmpl_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /*
+ * Identifier of a tunnel L4 destination port value. Only applies to tunnel
+ * types that has l4 destination port parameters.
+ */
+ uint16_t tunnel_dst_port_id;
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -40801,13 +43139,13 @@ struct hwrm_fwd_async_event_cmpl_output {
uint8_t valid;
} __rte_packed;
-/**************************
- * hwrm_nvm_raw_write_blk *
- **************************/
+/*****************************
+ * hwrm_tunnel_dst_port_free *
+ *****************************/
-/* hwrm_nvm_raw_write_blk_input (size:256b/32B) */
-struct hwrm_nvm_raw_write_blk_input {
+/* hwrm_tunnel_dst_port_free_input (size:192b/24B) */
+struct hwrm_tunnel_dst_port_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40836,22 +43174,39 @@ struct hwrm_nvm_raw_write_blk_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* Tunnel Type. */
+ uint8_t tunnel_type;
+ /* Virtual eXtensible Local Area Network (VXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN \
+ UINT32_C(0x1)
+ /* Generic Network Virtualization Encapsulation (Geneve) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_GENEVE \
+ UINT32_C(0x5)
+ /* IPV4 over virtual eXtensible Local Area Network (IPV4oVXLAN) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_V4 \
+ UINT32_C(0x9)
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_IPGRE_V1 \
+ UINT32_C(0xa)
+ /* Use fixed layer 2 ether type of 0xFFFF */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_L2_ETYPE \
+ UINT32_C(0xb)
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6 \
+ UINT32_C(0xc)
+ #define HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_LAST \
+ HWRM_TUNNEL_DST_PORT_FREE_INPUT_TUNNEL_TYPE_VXLAN_GPE_V6
+ uint8_t unused_0;
/*
- * 64-bit Host Source Address.
- * This is the location of the source data to be written.
- */
- uint64_t host_src_addr;
- /*
- * 32-bit Destination Address.
- * This is the NVRAM byte-offset where the source data will be written to.
+ * Identifier of a tunnel L4 destination port value. Only applies to tunnel
+ * types that has l4 destination port parameters.
*/
- uint32_t dest_addr;
- /* Length of data to be written, in bytes. */
- uint32_t len;
+ uint16_t tunnel_dst_port_id;
+ uint8_t unused_1[4];
} __rte_packed;
-/* hwrm_nvm_raw_write_blk_output (size:128b/16B) */
-struct hwrm_nvm_raw_write_blk_output {
+/* hwrm_tunnel_dst_port_free_output (size:128b/16B) */
+struct hwrm_tunnel_dst_port_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40860,7 +43215,7 @@ struct hwrm_nvm_raw_write_blk_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ uint8_t unused_1[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -40871,84 +43226,157 @@ struct hwrm_nvm_raw_write_blk_output {
uint8_t valid;
} __rte_packed;
-/*****************
- * hwrm_nvm_read *
- *****************/
+/* Periodic statistics context DMA to host. */
+/* ctx_hw_stats (size:1280b/160B) */
+struct ctx_hw_stats {
+ /* Number of received unicast packets */
+ uint64_t rx_ucast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of discarded packets on receive path */
+ uint64_t rx_discard_pkts;
+ /* Number of packets on receive path with error */
+ uint64_t rx_error_pkts;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of packets on transmit path with error */
+ uint64_t tx_error_pkts;
+ /* Number of discarded packets on transmit path */
+ uint64_t tx_discard_pkts;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of TPA packets */
+ uint64_t tpa_pkts;
+ /* Number of TPA bytes */
+ uint64_t tpa_bytes;
+ /* Number of TPA events */
+ uint64_t tpa_events;
+ /* Number of TPA aborts */
+ uint64_t tpa_aborts;
+} __rte_packed;
+/*
+ * Extended periodic statistics context DMA to host. On cards that
+ * support TPA v2, additional TPA related stats exist and can be retrieved
+ * by DMA of ctx_hw_stats_ext, rather than legacy ctx_hw_stats structure.
+ */
+/* ctx_hw_stats_ext (size:1408b/176B) */
+struct ctx_hw_stats_ext {
+ /* Number of received unicast packets */
+ uint64_t rx_ucast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of discarded packets on receive path */
+ uint64_t rx_discard_pkts;
+ /* Number of packets on receive path with error */
+ uint64_t rx_error_pkts;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of packets on transmit path with error */
+ uint64_t tx_error_pkts;
+ /* Number of discarded packets on transmit path */
+ uint64_t tx_discard_pkts;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of TPA eligible packets */
+ uint64_t rx_tpa_eligible_pkt;
+ /* Number of TPA eligible bytes */
+ uint64_t rx_tpa_eligible_bytes;
+ /* Number of TPA packets */
+ uint64_t rx_tpa_pkt;
+ /* Number of TPA bytes */
+ uint64_t rx_tpa_bytes;
+ /* Number of TPA errors */
+ uint64_t rx_tpa_errors;
+ /* Number of TPA events */
+ uint64_t rx_tpa_events;
+} __rte_packed;
-/* hwrm_nvm_read_input (size:320b/40B) */
-struct hwrm_nvm_read_input {
- /* The HWRM command request type. */
- uint16_t req_type;
+/* Periodic Engine statistics context DMA to host. */
+/* ctx_eng_stats (size:512b/64B) */
+struct ctx_eng_stats {
/*
- * The completion ring to send the completion event on. This should
- * be the NQ ID returned from the `nq_alloc` HWRM command.
+ * Count of data bytes into the Engine.
+ * This includes any user supplied prefix,
+ * but does not include any predefined
+ * prefix data.
*/
- uint16_t cmpl_ring;
+ uint64_t eng_bytes_in;
+ /* Count of data bytes out of the Engine. */
+ uint64_t eng_bytes_out;
/*
- * The sequence ID is used by the driver for tracking multiple
- * commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
+ * Count, in 4-byte (dword) units, of bytes
+ * that are input as auxiliary data.
+ * This includes the aux_cmd data.
*/
- uint16_t seq_id;
+ uint64_t aux_bytes_in;
/*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
- * * 0xFFFD - Reserved for user-space HWRM interface
- * * 0xFFFF - HWRM
+ * Count, in 4-byte (dword) units, of bytes
+ * that are output as auxiliary data.
+ * This count is the buffer space for aux_data
+ * output provided in the RQE, not the actual
+ * aux_data written
*/
- uint16_t target_id;
+ uint64_t aux_bytes_out;
+ /* Count of number of commands executed. */
+ uint64_t commands;
/*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
+ * Count of number of error commands.
+ * These are the commands with a
+ * non-zero status value.
*/
- uint64_t resp_addr;
+ uint64_t error_commands;
/*
- * 64-bit Host Destination Address.
- * This is the host address where the data will be written to.
+ * Compression/Encryption Engine usage,
+ * the unit is count of clock cycles
*/
- uint64_t host_dest_addr;
- /* The 0-based index of the directory entry. */
- uint16_t dir_idx;
- uint8_t unused_0[2];
- /* The NVRAM byte-offset to read from. */
- uint32_t offset;
- /* The length of the data to be read, in bytes. */
- uint32_t len;
- uint8_t unused_1[4];
-} __rte_packed;
-
-/* hwrm_nvm_read_output (size:128b/16B) */
-struct hwrm_nvm_read_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- uint8_t unused_0[7];
+ uint64_t cce_engine_usage;
/*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
+ * De-Compression/De-cryption Engine usage,
+ * the unit is count of clock cycles
*/
- uint8_t valid;
+ uint64_t cdd_engine_usage;
} __rte_packed;
-/*********************
- * hwrm_nvm_raw_dump *
- *********************/
+/***********************
+ * hwrm_stat_ctx_alloc *
+ ***********************/
-/* hwrm_nvm_raw_dump_input (size:256b/32B) */
-struct hwrm_nvm_raw_dump_input {
+/* hwrm_stat_ctx_alloc_input (size:256b/32B) */
+struct hwrm_stat_ctx_alloc_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -40978,18 +43406,50 @@ struct hwrm_nvm_raw_dump_input {
*/
uint64_t resp_addr;
/*
- * 64-bit Host Destination Address.
- * This is the host address where the data will be written to.
+ * This is the address for statistic block.
+ * > For new versions of the chip, this address should be 128B
+ * > aligned.
*/
- uint64_t host_dest_addr;
- /* 32-bit NVRAM byte-offset to read from. */
- uint32_t offset;
- /* Total length of NVRAM contents to be read, in bytes. */
- uint32_t len;
+ uint64_t stats_dma_addr;
+ /*
+ * The statistic block update period in ms.
+ * e.g. 250ms, 500ms, 750ms, 1000ms.
+ * If update_period_ms is 0, then the stats update
+ * shall be never done and the DMA address shall not be used.
+ * In this case, the stat block can only be read by
+ * hwrm_stat_ctx_query command.
+ * On Ethernet/L2 based devices:
+ * if tpa v2 supported (hwrm_vnic_qcaps[max_aggs_supported]>0),
+ * ctx_hw_stats_ext is used for DMA,
+ * else
+ * ctx_hw_stats is used for DMA.
+ */
+ uint32_t update_period_ms;
+ /*
+ * This field is used to specify statistics context specific
+ * configuration flags.
+ */
+ uint8_t stat_ctx_flags;
+ /*
+ * When this bit is set to '1', the statistics context shall be
+ * allocated for RoCE traffic only. In this case, traffic other
+ * than offloaded RoCE traffic shall not be included in this
+ * statistic context.
+ * When this bit is set to '0', the statistics context shall be
+ * used for network traffic or engine traffic.
+ */
+ #define HWRM_STAT_CTX_ALLOC_INPUT_STAT_CTX_FLAGS_ROCE UINT32_C(0x1)
+ uint8_t unused_0;
+ /*
+ * This is the size of the structure (ctx_hw_stats or
+ * ctx_hw_stats_ext) that the driver has allocated to be used
+ * for the periodic DMA updates.
+ */
+ uint16_t stats_dma_length;
} __rte_packed;
-/* hwrm_nvm_raw_dump_output (size:128b/16B) */
-struct hwrm_nvm_raw_dump_output {
+/* hwrm_stat_ctx_alloc_output (size:128b/16B) */
+struct hwrm_stat_ctx_alloc_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -40998,7 +43458,9 @@ struct hwrm_nvm_raw_dump_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* This is the statistics context ID value. */
+ uint32_t stat_ctx_id;
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -41009,13 +43471,13 @@ struct hwrm_nvm_raw_dump_output {
uint8_t valid;
} __rte_packed;
-/****************************
- * hwrm_nvm_get_dir_entries *
- ****************************/
+/**********************
+ * hwrm_stat_ctx_free *
+ **********************/
-/* hwrm_nvm_get_dir_entries_input (size:192b/24B) */
-struct hwrm_nvm_get_dir_entries_input {
+/* hwrm_stat_ctx_free_input (size:192b/24B) */
+struct hwrm_stat_ctx_free_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41044,15 +43506,13 @@ struct hwrm_nvm_get_dir_entries_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * 64-bit Host Destination Address.
- * This is the host address where the directory will be written.
- */
- uint64_t host_dest_addr;
+ /* ID of the statistics context that is being queried. */
+ uint32_t stat_ctx_id;
+ uint8_t unused_0[4];
} __rte_packed;
-/* hwrm_nvm_get_dir_entries_output (size:128b/16B) */
-struct hwrm_nvm_get_dir_entries_output {
+/* hwrm_stat_ctx_free_output (size:128b/16B) */
+struct hwrm_stat_ctx_free_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41061,7 +43521,9 @@ struct hwrm_nvm_get_dir_entries_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* This is the statistics context ID value. */
+ uint32_t stat_ctx_id;
+ uint8_t unused_0[3];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -41072,13 +43534,13 @@ struct hwrm_nvm_get_dir_entries_output {
uint8_t valid;
} __rte_packed;
-/*************************
- * hwrm_nvm_get_dir_info *
- *************************/
+/***********************
+ * hwrm_stat_ctx_query *
+ ***********************/
-/* hwrm_nvm_get_dir_info_input (size:128b/16B) */
-struct hwrm_nvm_get_dir_info_input {
+/* hwrm_stat_ctx_query_input (size:192b/24B) */
+struct hwrm_stat_ctx_query_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41107,10 +43569,20 @@ struct hwrm_nvm_get_dir_info_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
-} __rte_packed;
-
-/* hwrm_nvm_get_dir_info_output (size:192b/24B) */
-struct hwrm_nvm_get_dir_info_output {
+ /* ID of the statistics context that is being queried. */
+ uint32_t stat_ctx_id;
+ uint8_t flags;
+ /*
+ * This bit is set to 1 when request is for a counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
+ */
+ #define HWRM_STAT_CTX_QUERY_INPUT_FLAGS_COUNTER_MASK UINT32_C(0x1)
+ uint8_t unused_0[3];
+} __rte_packed;
+
+/* hwrm_stat_ctx_query_output (size:1408b/176B) */
+struct hwrm_stat_ctx_query_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41119,10 +43591,46 @@ struct hwrm_nvm_get_dir_info_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Number of directory entries in the directory. */
- uint32_t entries;
- /* Size of each directory entry, in bytes. */
- uint32_t entry_length;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of packets discarded in transmit path */
+ uint64_t tx_discard_pkts;
+ /* Number of packets in transmit path with error */
+ uint64_t tx_error_pkts;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of received unicast packets */
+ uint64_t rx_ucast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of packets discarded in receive path */
+ uint64_t rx_discard_pkts;
+ /* Number of packets in receive path with errors */
+ uint64_t rx_error_pkts;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of aggregated unicast packets */
+ uint64_t rx_agg_pkts;
+ /* Number of aggregated unicast bytes */
+ uint64_t rx_agg_bytes;
+ /* Number of aggregation events */
+ uint64_t rx_agg_events;
+ /* Number of aborted aggregations */
+ uint64_t rx_agg_aborts;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
@@ -41134,13 +43642,13 @@ struct hwrm_nvm_get_dir_info_output {
uint8_t valid;
} __rte_packed;
-/******************
- * hwrm_nvm_write *
- ******************/
+/***************************
+ * hwrm_stat_ext_ctx_query *
+ ***************************/
-/* hwrm_nvm_write_input (size:384b/48B) */
-struct hwrm_nvm_write_input {
+/* hwrm_stat_ext_ctx_query_input (size:192b/24B) */
+struct hwrm_stat_ext_ctx_query_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41169,49 +43677,21 @@ struct hwrm_nvm_write_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /* ID of the extended statistics context that is being queried. */
+ uint32_t stat_ctx_id;
+ uint8_t flags;
/*
- * 64-bit Host Source Address.
- * This is where the source data is.
- */
- uint64_t host_src_addr;
- /* The Directory Entry Type (valid values are defined in the bnxnvm_directory_type enum defined in the file bnxnvm_defs.h). */
- uint16_t dir_type;
- /*
- * Directory ordinal.
- * The 0-based instance of the combined Directory Entry Type and Extension.
- */
- uint16_t dir_ordinal;
- /* The Directory Entry Extension flags (see BNX_DIR_EXT_* in the file bnxnvm_defs.h). */
- uint16_t dir_ext;
- /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file bnxnvm_defs.h). */
- uint16_t dir_attr;
- /*
- * Length of data to write, in bytes. May be less than or equal to the allocated size for the directory entry.
- * The data length stored in the directory entry will be updated to reflect this value once the write is complete.
- */
- uint32_t dir_data_length;
- /* Option. */
- uint16_t option;
- uint16_t flags;
- /*
- * When this bit is '1', the original active image
- * will not be removed. TBD: what purpose is this?
+ * This bit is set to 1 when request is for a counter mask,
+ * representing the width of each of the stats counters, rather
+ * than counters themselves.
*/
- #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG \
+ #define HWRM_STAT_EXT_CTX_QUERY_INPUT_FLAGS_COUNTER_MASK \
UINT32_C(0x1)
- /*
- * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length).
- * If this value is less than the specified data length, it will be ignored.
- * The response will contain the actual allocated item length, which may be greater than the requested item length.
- * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accommodate
- * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data).
- */
- uint32_t dir_item_length;
- uint32_t unused_0;
+ uint8_t unused_0[3];
} __rte_packed;
-/* hwrm_nvm_write_output (size:128b/16B) */
-struct hwrm_nvm_write_output {
+/* hwrm_stat_ext_ctx_query_output (size:1536b/192B) */
+struct hwrm_stat_ext_ctx_query_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41220,14 +43700,51 @@ struct hwrm_nvm_write_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * Length of the allocated NVM for the item, in bytes. The value may be greater than or equal to the specified data length or the requested item length.
- * The actual item length used when creating a new directory entry will be a multiple of an NVM block size.
- */
- uint32_t dir_item_length;
- /* The directory index of the created or modified item. */
- uint16_t dir_idx;
- uint8_t unused_0;
+ /* Number of received unicast packets */
+ uint64_t rx_ucast_pkts;
+ /* Number of received multicast packets */
+ uint64_t rx_mcast_pkts;
+ /* Number of received broadcast packets */
+ uint64_t rx_bcast_pkts;
+ /* Number of discarded packets on receive path */
+ uint64_t rx_discard_pkts;
+ /* Number of packets on receive path with error */
+ uint64_t rx_error_pkts;
+ /* Number of received bytes for unicast traffic */
+ uint64_t rx_ucast_bytes;
+ /* Number of received bytes for multicast traffic */
+ uint64_t rx_mcast_bytes;
+ /* Number of received bytes for broadcast traffic */
+ uint64_t rx_bcast_bytes;
+ /* Number of transmitted unicast packets */
+ uint64_t tx_ucast_pkts;
+ /* Number of transmitted multicast packets */
+ uint64_t tx_mcast_pkts;
+ /* Number of transmitted broadcast packets */
+ uint64_t tx_bcast_pkts;
+ /* Number of packets on transmit path with error */
+ uint64_t tx_error_pkts;
+ /* Number of discarded packets on transmit path */
+ uint64_t tx_discard_pkts;
+ /* Number of transmitted bytes for unicast traffic */
+ uint64_t tx_ucast_bytes;
+ /* Number of transmitted bytes for multicast traffic */
+ uint64_t tx_mcast_bytes;
+ /* Number of transmitted bytes for broadcast traffic */
+ uint64_t tx_bcast_bytes;
+ /* Number of TPA eligible packets */
+ uint64_t rx_tpa_eligible_pkt;
+ /* Number of TPA eligible bytes */
+ uint64_t rx_tpa_eligible_bytes;
+ /* Number of TPA packets */
+ uint64_t rx_tpa_pkt;
+ /* Number of TPA bytes */
+ uint64_t rx_tpa_bytes;
+ /* Number of TPA errors */
+ uint64_t rx_tpa_errors;
+ /* Number of TPA events */
+ uint64_t rx_tpa_events;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -41238,31 +43755,13 @@ struct hwrm_nvm_write_output {
uint8_t valid;
} __rte_packed;
-/* hwrm_nvm_write_cmd_err (size:64b/8B) */
-struct hwrm_nvm_write_cmd_err {
- /*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
- */
- uint8_t code;
- /* Unknown error */
- #define HWRM_NVM_WRITE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
- /* Unable to complete operation due to fragmentation */
- #define HWRM_NVM_WRITE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1)
- /* nvm is completely full. */
- #define HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2)
- #define HWRM_NVM_WRITE_CMD_ERR_CODE_LAST \
- HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE
- uint8_t unused_0[7];
-} __rte_packed;
-
-/*******************
- * hwrm_nvm_modify *
- *******************/
+/***************************
+ * hwrm_stat_ctx_eng_query *
+ ***************************/
-/* hwrm_nvm_modify_input (size:320b/40B) */
-struct hwrm_nvm_modify_input {
+/* hwrm_stat_ctx_eng_query_input (size:192b/24B) */
+struct hwrm_stat_ctx_eng_query_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41291,42 +43790,13 @@ struct hwrm_nvm_modify_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * 64-bit Host Source Address.
- * This is where the modified data is.
- */
- uint64_t host_src_addr;
- /* 16-bit directory entry index. */
- uint16_t dir_idx;
- uint16_t flags;
- /*
- * This flag indicates the sender wants to modify a continuous NVRAM
- * area using a batch of this HWRM requests. The offset of a request
- * must be continuous to the end of previous request's. Firmware does
- * not update the directory entry until receiving the last request,
- * which is indicated by the batch_last flag.
- * This flag is set usually when a sender does not have a block of
- * memory that is big enough to hold the entire NVRAM data for send
- * at one time.
- */
- #define HWRM_NVM_MODIFY_INPUT_FLAGS_BATCH_MODE UINT32_C(0x1)
- /*
- * This flag can be used only when the batch_mode flag is set.
- * It indicates this request is the last of batch requests.
- */
- #define HWRM_NVM_MODIFY_INPUT_FLAGS_BATCH_LAST UINT32_C(0x2)
- /* 32-bit NVRAM byte-offset to modify content from. */
- uint32_t offset;
- /*
- * Length of data to be modified, in bytes. The length shall
- * be non-zero.
- */
- uint32_t len;
- uint8_t unused_1[4];
+ /* ID of the statistics context that is being queried. */
+ uint32_t stat_ctx_id;
+ uint8_t unused_0[4];
} __rte_packed;
-/* hwrm_nvm_modify_output (size:128b/16B) */
-struct hwrm_nvm_modify_output {
+/* hwrm_stat_ctx_eng_query_output (size:640b/80B) */
+struct hwrm_stat_ctx_eng_query_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41335,6 +43805,47 @@ struct hwrm_nvm_modify_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /*
+ * Count of data bytes into the Engine.
+ * This includes any user supplied prefix,
+ * but does not include any predefined
+ * prefix data.
+ */
+ uint64_t eng_bytes_in;
+ /* Count of data bytes out of the Engine. */
+ uint64_t eng_bytes_out;
+ /*
+ * Count, in 4-byte (dword) units, of bytes
+ * that are input as auxiliary data.
+ * This includes the aux_cmd data.
+ */
+ uint64_t aux_bytes_in;
+ /*
+ * Count, in 4-byte (dword) units, of bytes
+ * that are output as auxiliary data.
+ * This count is the buffer space for aux_data
+ * output provided in the RQE, not the actual
+ * aux_data written
+ */
+ uint64_t aux_bytes_out;
+ /* Count of number of commands executed. */
+ uint64_t commands;
+ /*
+ * Count of number of error commands.
+ * These are the commands with a
+ * non-zero status value.
+ */
+ uint64_t error_commands;
+ /*
+ * Compression/Encryption Engine usage,
+ * the unit is count of clock cycles
+ */
+ uint64_t cce_engine_usage;
+ /*
+ * De-Compression/De-cryption Engine usage,
+ * the unit is count of clock cycles
+ */
+ uint64_t cdd_engine_usage;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
@@ -41347,12 +43858,12 @@ struct hwrm_nvm_modify_output {
} __rte_packed;
/***************************
- * hwrm_nvm_find_dir_entry *
+ * hwrm_stat_ctx_clr_stats *
***************************/
-/* hwrm_nvm_find_dir_entry_input (size:256b/32B) */
-struct hwrm_nvm_find_dir_entry_input {
+/* hwrm_stat_ctx_clr_stats_input (size:192b/24B) */
+struct hwrm_stat_ctx_clr_stats_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41381,42 +43892,13 @@ struct hwrm_nvm_find_dir_entry_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t enables;
- /*
- * This bit must be '1' for the dir_idx_valid field to be
- * configured.
- */
- #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_ENABLES_DIR_IDX_VALID \
- UINT32_C(0x1)
- /* Directory Entry Index */
- uint16_t dir_idx;
- /* Directory Entry (Image) Type */
- uint16_t dir_type;
- /*
- * Directory ordinal.
- * The instance of this Directory Type
- */
- uint16_t dir_ordinal;
- /* The Directory Entry Extension flags. */
- uint16_t dir_ext;
- /* This value indicates the search option using dir_ordinal. */
- uint8_t opt_ordinal;
- /* This value indicates the search option using dir_ordinal. */
- #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_MASK UINT32_C(0x3)
- #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_SFT 0
- /* Equal to specified ordinal value. */
- #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_EQ UINT32_C(0x0)
- /* Greater than or equal to specified ordinal value */
- #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GE UINT32_C(0x1)
- /* Greater than specified ordinal value */
- #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT UINT32_C(0x2)
- #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_LAST \
- HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT
- uint8_t unused_0[3];
+ /* ID of the statistics context that is being queried. */
+ uint32_t stat_ctx_id;
+ uint8_t unused_0[4];
} __rte_packed;
-/* hwrm_nvm_find_dir_entry_output (size:256b/32B) */
-struct hwrm_nvm_find_dir_entry_output {
+/* hwrm_stat_ctx_clr_stats_output (size:128b/16B) */
+struct hwrm_stat_ctx_clr_stats_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41425,19 +43907,6 @@ struct hwrm_nvm_find_dir_entry_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Allocated NVRAM for this directory entry, in bytes. */
- uint32_t dir_item_length;
- /* Size of the stored data for this directory entry, in bytes. */
- uint32_t dir_data_length;
- /*
- * Firmware version.
- * Only valid if the directory entry is for embedded firmware stored in APE_BIN Format.
- */
- uint32_t fw_ver;
- /* Directory ordinal. */
- uint16_t dir_ordinal;
- /* Directory Entry Index */
- uint16_t dir_idx;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
@@ -41449,13 +43918,13 @@ struct hwrm_nvm_find_dir_entry_output {
uint8_t valid;
} __rte_packed;
-/****************************
- * hwrm_nvm_erase_dir_entry *
- ****************************/
+/********************
+ * hwrm_pcie_qstats *
+ ********************/
-/* hwrm_nvm_erase_dir_entry_input (size:192b/24B) */
-struct hwrm_nvm_erase_dir_entry_input {
+/* hwrm_pcie_qstats_input (size:256b/32B) */
+struct hwrm_pcie_qstats_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41484,13 +43953,22 @@ struct hwrm_nvm_erase_dir_entry_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Directory Entry Index */
- uint16_t dir_idx;
+ /*
+ * The size of PCIe statistics block in bytes.
+ * Firmware will DMA the PCIe statistics to
+ * the host with this field size in the response.
+ */
+ uint16_t pcie_stat_size;
uint8_t unused_0[6];
+ /*
+ * This is the host address where
+ * PCIe statistics will be stored
+ */
+ uint64_t pcie_stat_host_addr;
} __rte_packed;
-/* hwrm_nvm_erase_dir_entry_output (size:128b/16B) */
-struct hwrm_nvm_erase_dir_entry_output {
+/* hwrm_pcie_qstats_output (size:128b/16B) */
+struct hwrm_pcie_qstats_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41499,7 +43977,9 @@ struct hwrm_nvm_erase_dir_entry_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t unused_0[7];
+ /* The size of PCIe statistics block in bytes. */
+ uint16_t pcie_stat_size;
+ uint8_t unused_0[5];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -41510,13 +43990,49 @@ struct hwrm_nvm_erase_dir_entry_output {
uint8_t valid;
} __rte_packed;
-/*************************
- * hwrm_nvm_get_dev_info *
- *************************/
+/* PCIe Statistics Formats */
+/* pcie_ctx_hw_stats (size:768b/96B) */
+struct pcie_ctx_hw_stats {
+ /* Number of physical layer receiver errors */
+ uint64_t pcie_pl_signal_integrity;
+ /* Number of DLLP CRC errors detected by Data Link Layer */
+ uint64_t pcie_dl_signal_integrity;
+ /*
+ * Number of TLP LCRC and sequence number errors detected
+ * by Data Link Layer
+ */
+ uint64_t pcie_tl_signal_integrity;
+ /* Number of times LTSSM entered Recovery state */
+ uint64_t pcie_link_integrity;
+ /* Report number of TLP bits that have been transmitted in Mbps */
+ uint64_t pcie_tx_traffic_rate;
+ /* Report number of TLP bits that have been received in Mbps */
+ uint64_t pcie_rx_traffic_rate;
+ /* Number of DLLP bytes that have been transmitted */
+ uint64_t pcie_tx_dllp_statistics;
+ /* Number of DLLP bytes that have been received */
+ uint64_t pcie_rx_dllp_statistics;
+ /*
+ * Number of times spent in each phase of gen3
+ * equalization
+ */
+ uint64_t pcie_equalization_time;
+ /* Records the last 16 transitions of the LTSSM */
+ uint32_t pcie_ltssm_histogram[4];
+ /*
+ * Record the last 8 reasons on why LTSSM transitioned
+ * to Recovery
+ */
+ uint64_t pcie_recovery_histogram;
+} __rte_packed;
+/**********************
+ * hwrm_exec_fwd_resp *
+ **********************/
-/* hwrm_nvm_get_dev_info_input (size:128b/16B) */
-struct hwrm_nvm_get_dev_info_input {
+
+/* hwrm_exec_fwd_resp_input (size:1024b/128B) */
+struct hwrm_exec_fwd_resp_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41545,10 +44061,26 @@ struct hwrm_nvm_get_dev_info_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /*
+ * This is an encapsulated request. This request should
+ * be executed by the HWRM and the response should be
+ * provided in the response buffer inside the encapsulated
+ * request.
+ */
+ uint32_t encap_request[26];
+ /*
+ * This value indicates the target id of the response to
+ * the encapsulated request.
+ * 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors
+ * 0xFFFF - HWRM
+ */
+ uint16_t encap_resp_target_id;
+ uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_nvm_get_dev_info_output (size:256b/32B) */
-struct hwrm_nvm_get_dev_info_output {
+/* hwrm_exec_fwd_resp_output (size:128b/16B) */
+struct hwrm_exec_fwd_resp_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41557,23 +44089,7 @@ struct hwrm_nvm_get_dev_info_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Manufacturer ID. */
- uint16_t manufacturer_id;
- /* Device ID. */
- uint16_t device_id;
- /* Sector size of the NVRAM device. */
- uint32_t sector_size;
- /* Total size, in bytes of the NVRAM device. */
- uint32_t nvram_size;
- uint32_t reserved_size;
- /* Available size that can be used, in bytes. Available size is the NVRAM size take away the used size and reserved size. */
- uint32_t available_size;
- /* This field represents the major version of NVM cfg */
- uint8_t nvm_cfg_ver_maj;
- /* This field represents the minor version of NVM cfg */
- uint8_t nvm_cfg_ver_min;
- /* This field represents the update version of NVM cfg */
- uint8_t nvm_cfg_ver_upd;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -41584,13 +44100,13 @@ struct hwrm_nvm_get_dev_info_output {
uint8_t valid;
} __rte_packed;
-/**************************
- * hwrm_nvm_mod_dir_entry *
- **************************/
+/************************
+ * hwrm_reject_fwd_resp *
+ ************************/
-/* hwrm_nvm_mod_dir_entry_input (size:256b/32B) */
-struct hwrm_nvm_mod_dir_entry_input {
+/* hwrm_reject_fwd_resp_input (size:1024b/128B) */
+struct hwrm_reject_fwd_resp_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41619,32 +44135,26 @@ struct hwrm_nvm_mod_dir_entry_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t enables;
/*
- * This bit must be '1' for the checksum field to be
- * configured.
- */
- #define HWRM_NVM_MOD_DIR_ENTRY_INPUT_ENABLES_CHECKSUM UINT32_C(0x1)
- /* Directory Entry Index */
- uint16_t dir_idx;
- /*
- * Directory ordinal.
- * The (0-based) instance of this Directory Type.
+ * This is an encapsulated request. This request should
+ * be rejected by the HWRM and the error response should be
+ * provided in the response buffer inside the encapsulated
+ * request.
*/
- uint16_t dir_ordinal;
- /* The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension flag definitions). */
- uint16_t dir_ext;
- /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute flag definitions). */
- uint16_t dir_attr;
+ uint32_t encap_request[26];
/*
- * If valid, then this field updates the checksum
- * value of the content in the directory entry.
+ * This value indicates the target id of the response to
+ * the encapsulated request.
+ * 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors
+ * 0xFFFF - HWRM
*/
- uint32_t checksum;
+ uint16_t encap_resp_target_id;
+ uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_nvm_mod_dir_entry_output (size:128b/16B) */
-struct hwrm_nvm_mod_dir_entry_output {
+/* hwrm_reject_fwd_resp_output (size:128b/16B) */
+struct hwrm_reject_fwd_resp_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41664,13 +44174,13 @@ struct hwrm_nvm_mod_dir_entry_output {
uint8_t valid;
} __rte_packed;
-/**************************
- * hwrm_nvm_verify_update *
- **************************/
+/*****************
+ * hwrm_fwd_resp *
+ *****************/
-/* hwrm_nvm_verify_update_input (size:192b/24B) */
-struct hwrm_nvm_verify_update_input {
+/* hwrm_fwd_resp_input (size:1024b/128B) */
+struct hwrm_fwd_resp_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41699,26 +44209,41 @@ struct hwrm_nvm_verify_update_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* Directory Entry Type, to be verified. */
- uint16_t dir_type;
/*
- * Directory ordinal.
- * The instance of the Directory Type to be verified.
+ * This value indicates the target id of the encapsulated
+ * response.
+ * 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors
+ * 0xFFFF - HWRM
*/
- uint16_t dir_ordinal;
+ uint16_t encap_resp_target_id;
/*
- * The Directory Entry Extension flags.
- * The "UPDATE" extension flag must be set in this value.
- * A corresponding directory entry with the same type and ordinal values but *without*
- * the "UPDATE" extension flag must also exist. The other flags of the extension must
- * be identical between the active and update entries.
+ * This value indicates the completion ring the encapsulated
+ * response will be optionally completed on. If the value is
+ * -1, then no CR completion shall be generated for the
+ * encapsulated response. Any other value must be a
+ * valid CR ring_id value. If a valid encap_resp_cmpl_ring
+ * is provided, then a CR completion shall be generated for
+ * the encapsulated response.
*/
- uint16_t dir_ext;
- uint8_t unused_0[2];
+ uint16_t encap_resp_cmpl_ring;
+ /* This field indicates the length of encapsulated response. */
+ uint16_t encap_resp_len;
+ uint8_t unused_0;
+ uint8_t unused_1;
+ /*
+ * This is the host address where the encapsulated response
+ * will be written.
+ * This area must be 16B aligned and must be cleared to zero
+ * before the original request is made.
+ */
+ uint64_t encap_resp_addr;
+ /* This is an encapsulated response. */
+ uint32_t encap_resp[24];
} __rte_packed;
-/* hwrm_nvm_verify_update_output (size:128b/16B) */
-struct hwrm_nvm_verify_update_output {
+/* hwrm_fwd_resp_output (size:128b/16B) */
+struct hwrm_fwd_resp_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41738,13 +44263,13 @@ struct hwrm_nvm_verify_update_output {
uint8_t valid;
} __rte_packed;
-/***************************
- * hwrm_nvm_install_update *
- ***************************/
+/*****************************
+ * hwrm_fwd_async_event_cmpl *
+ *****************************/
-/* hwrm_nvm_install_update_input (size:192b/24B) */
-struct hwrm_nvm_install_update_input {
+/* hwrm_fwd_async_event_cmpl_input (size:320b/40B) */
+struct hwrm_fwd_async_event_cmpl_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41774,56 +44299,21 @@ struct hwrm_nvm_install_update_input {
*/
uint64_t resp_addr;
/*
- * Installation type. If the value 3 through 0xffff is used,
- * only packaged items with that type value will be installed and
- * conditional installation directives for those packaged items
- * will be over-ridden (i.e. 'create' or 'replace' will be treated
- * as 'install').
- */
- uint32_t install_type;
- /*
- * Perform a normal package installation. Conditional installation
- * directives (e.g. 'create' and 'replace') of packaged items
- * will be followed.
- */
- #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_NORMAL UINT32_C(0x0)
- /*
- * Install all packaged items regardless of installation directive
- * (i.e. treat all packaged items as though they have an installation
- * directive of 'install').
- */
- #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL \
- UINT32_C(0xffffffff)
- #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_LAST \
- HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL
- uint16_t flags;
- /* If set to 1, then securely erase all unused locations in persistent storage. */
- #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \
- UINT32_C(0x1)
- /*
- * If set to 1, then unspecified images, images not in the package file, will be safely deleted.
- * When combined with erase_unused_space then unspecified images will be securely erased.
- */
- #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \
- UINT32_C(0x2)
- /*
- * If set to 1, FW will defragment the NVM if defragmentation is required for the update.
- * Allow additional time for this command to complete if this bit is set to 1.
- */
- #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ALLOWED_TO_DEFRAG \
- UINT32_C(0x4)
- /*
- * If set to 1, FW will verify the package in the "UPDATE" NVM item
- * without installing it. This flag is for FW internal use only.
- * Users should not set this flag. The request will otherwise fail.
+ * This value indicates the target id of the encapsulated
+ * asynchronous event.
+ * 0x0 - 0xFFF8 - Used for function ids
+ * 0xFFF8 - 0xFFFE - Reserved for internal processors
+ * 0xFFFF - Broadcast to all children VFs (only applicable when
+ * a PF is the requester)
*/
- #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_VERIFY_ONLY \
- UINT32_C(0x8)
- uint8_t unused_0[2];
+ uint16_t encap_async_event_target_id;
+ uint8_t unused_0[6];
+ /* This is an encapsulated asynchronous event completion. */
+ uint32_t encap_async_event_cmpl[4];
} __rte_packed;
-/* hwrm_nvm_install_update_output (size:192b/24B) */
-struct hwrm_nvm_install_update_output {
+/* hwrm_fwd_async_event_cmpl_output (size:128b/16B) */
+struct hwrm_fwd_async_event_cmpl_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41832,55 +44322,7 @@ struct hwrm_nvm_install_update_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /*
- * Bit-mask of successfully installed items.
- * Bit-0 corresponding to the first packaged item, Bit-1 for the second item, etc.
- * A value of 0 indicates that no items were successfully installed.
- */
- uint64_t installed_items;
- /* result is 8 b */
- uint8_t result;
- /* There was no problem with the package installation. */
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS UINT32_C(0x0)
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_LAST \
- HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS
- /* problem_item is 8 b */
- uint8_t problem_item;
- /* There was no problem with any packaged items. */
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_NONE \
- UINT32_C(0x0)
- /* There was a problem with the NVM package itself. */
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE \
- UINT32_C(0xff)
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_LAST \
- HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE
- /* reset_required is 8 b */
- uint8_t reset_required;
- /*
- * No reset is required for installed/updated firmware or
- * microcode to take effect.
- */
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_NONE \
- UINT32_C(0x0)
- /*
- * A PCIe reset (e.g. system reboot) is
- * required for newly installed/updated firmware or
- * microcode to take effect.
- */
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_PCI \
- UINT32_C(0x1)
- /*
- * A controller power reset (e.g. system power-cycle) is
- * required for newly installed/updated firmware or
- * microcode to take effect. Some newly installed/updated
- * firmware or microcode may still take effect upon the
- * next PCIe reset.
- */
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER \
- UINT32_C(0x2)
- #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_LAST \
- HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER
- uint8_t unused_0[4];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -41891,31 +44333,13 @@ struct hwrm_nvm_install_update_output {
uint8_t valid;
} __rte_packed;
-/* hwrm_nvm_install_update_cmd_err (size:64b/8B) */
-struct hwrm_nvm_install_update_cmd_err {
- /*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
- */
- uint8_t code;
- /* Unknown error */
- #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
- /* Unable to complete operation due to fragmentation */
- #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1)
- /* nvm is completely full. */
- #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2)
- #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_LAST \
- HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE
- uint8_t unused_0[7];
-} __rte_packed;
-
-/******************
- * hwrm_nvm_flush *
- ******************/
+/**************************
+ * hwrm_nvm_raw_write_blk *
+ **************************/
-/* hwrm_nvm_flush_input (size:128b/16B) */
-struct hwrm_nvm_flush_input {
+/* hwrm_nvm_raw_write_blk_input (size:256b/32B) */
+struct hwrm_nvm_raw_write_blk_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -41944,10 +44368,22 @@ struct hwrm_nvm_flush_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /*
+ * 64-bit Host Source Address.
+ * This is the location of the source data to be written.
+ */
+ uint64_t host_src_addr;
+ /*
+ * 32-bit Destination Address.
+ * This is the NVRAM byte-offset where the source data will be written to.
+ */
+ uint32_t dest_addr;
+ /* Length of data to be written, in bytes. */
+ uint32_t len;
} __rte_packed;
-/* hwrm_nvm_flush_output (size:128b/16B) */
-struct hwrm_nvm_flush_output {
+/* hwrm_nvm_raw_write_blk_output (size:128b/16B) */
+struct hwrm_nvm_raw_write_blk_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -41967,29 +44403,13 @@ struct hwrm_nvm_flush_output {
uint8_t valid;
} __rte_packed;
-/* hwrm_nvm_flush_cmd_err (size:64b/8B) */
-struct hwrm_nvm_flush_cmd_err {
- /*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
- */
- uint8_t code;
- /* Unknown error */
- #define HWRM_NVM_FLUSH_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
- /* flush could not be performed */
- #define HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL UINT32_C(0x1)
- #define HWRM_NVM_FLUSH_CMD_ERR_CODE_LAST \
- HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL
- uint8_t unused_0[7];
-} __rte_packed;
-
-/*************************
- * hwrm_nvm_get_variable *
- *************************/
+/*****************
+ * hwrm_nvm_read *
+ *****************/
-/* hwrm_nvm_get_variable_input (size:320b/40B) */
-struct hwrm_nvm_get_variable_input {
+/* hwrm_nvm_read_input (size:320b/40B) */
+struct hwrm_nvm_read_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -42019,49 +44439,22 @@ struct hwrm_nvm_get_variable_input {
*/
uint64_t resp_addr;
/*
- * This is the host address where
- * nvm variable will be stored
- */
- uint64_t dest_data_addr;
- /* size of data in bits */
- uint16_t data_len;
- /* nvm cfg option number */
- uint16_t option_num;
- /* reserved. */
- #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0)
- /* reserved. */
- #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \
- UINT32_C(0xffff)
- #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_LAST \
- HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF
- /*
- * Number of dimensions for this nvm configuration variable.
- * This value indicates how many of the indexN values to use.
- * A value of 0 means that none of the indexN values are valid.
- * A value of 1 requires at index0 is valued, a value of 2
- * requires that index0 and index1 are valid, and so forth
- */
- uint16_t dimensions;
- /* index for the 1st dimensions */
- uint16_t index_0;
- /* index for the 2nd dimensions */
- uint16_t index_1;
- /* index for the 3rd dimensions */
- uint16_t index_2;
- /* index for the 4th dimensions */
- uint16_t index_3;
- uint8_t flags;
- /*
- * When this bit is set to 1, the factory default value will be returned,
- * 0 returns the operational value.
+ * 64-bit Host Destination Address.
+ * This is the host address where the data will be written to.
*/
- #define HWRM_NVM_GET_VARIABLE_INPUT_FLAGS_FACTORY_DFLT \
- UINT32_C(0x1)
- uint8_t unused_0;
+ uint64_t host_dest_addr;
+ /* The 0-based index of the directory entry. */
+ uint16_t dir_idx;
+ uint8_t unused_0[2];
+ /* The NVRAM byte-offset to read from. */
+ uint32_t offset;
+ /* The length of the data to be read, in bytes. */
+ uint32_t len;
+ uint8_t unused_1[4];
} __rte_packed;
-/* hwrm_nvm_get_variable_output (size:128b/16B) */
-struct hwrm_nvm_get_variable_output {
+/* hwrm_nvm_read_output (size:128b/16B) */
+struct hwrm_nvm_read_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -42070,25 +44463,7 @@ struct hwrm_nvm_get_variable_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* size of data of the actual variable retrieved in bits */
- uint16_t data_len;
- /*
- * option_num is the option number for the data retrieved. It is possible in the
- * future that the option number returned would be different than requested. This
- * condition could occur if an option is deprecated and a new option id is defined
- * with similar characteristics, but has a slightly different definition. This
- * also makes it convenient for the caller to identify the variable result with
- * the option id from the response.
- */
- uint16_t option_num;
- /* reserved. */
- #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0)
- /* reserved. */
- #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF \
- UINT32_C(0xffff)
- #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_LAST \
- HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF
- uint8_t unused_0[3];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -42099,33 +44474,13 @@ struct hwrm_nvm_get_variable_output {
uint8_t valid;
} __rte_packed;
-/* hwrm_nvm_get_variable_cmd_err (size:64b/8B) */
-struct hwrm_nvm_get_variable_cmd_err {
- /*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
- */
- uint8_t code;
- /* Unknown error */
- #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
- /* variable does not exist */
- #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1)
- /* configuration is corrupted and the variable cannot be saved */
- #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2)
- /* length specified is too small */
- #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT UINT32_C(0x3)
- #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LAST \
- HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT
- uint8_t unused_0[7];
-} __rte_packed;
-
-/*************************
- * hwrm_nvm_set_variable *
- *************************/
+/*********************
+ * hwrm_nvm_raw_dump *
+ *********************/
-/* hwrm_nvm_set_variable_input (size:320b/40B) */
-struct hwrm_nvm_set_variable_input {
+/* hwrm_nvm_raw_dump_input (size:256b/32B) */
+struct hwrm_nvm_raw_dump_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -42155,70 +44510,18 @@ struct hwrm_nvm_set_variable_input {
*/
uint64_t resp_addr;
/*
- * This is the host address where
- * nvm variable will be copied from
- */
- uint64_t src_data_addr;
- /* size of data in bits */
- uint16_t data_len;
- /* nvm cfg option number */
- uint16_t option_num;
- /* reserved. */
- #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0)
- /* reserved. */
- #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \
- UINT32_C(0xffff)
- #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_LAST \
- HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF
- /*
- * Number of dimensions for this nvm configuration variable.
- * This value indicates how many of the indexN values to use.
- * A value of 0 means that none of the indexN values are valid.
- * A value of 1 requires at index0 is valued, a value of 2
- * requires that index0 and index1 are valid, and so forth
+ * 64-bit Host Destination Address.
+ * This is the host address where the data will be written to.
*/
- uint16_t dimensions;
- /* index for the 1st dimensions */
- uint16_t index_0;
- /* index for the 2nd dimensions */
- uint16_t index_1;
- /* index for the 3rd dimensions */
- uint16_t index_2;
- /* index for the 4th dimensions */
- uint16_t index_3;
- uint8_t flags;
- /* When this bit is 1, flush internal cache after this write operation (see hwrm_nvm_flush command.) */
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FORCE_FLUSH \
- UINT32_C(0x1)
- /* encryption method */
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_MASK \
- UINT32_C(0xe)
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_SFT 1
- /* No encryption. */
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_NONE \
- (UINT32_C(0x0) << 1)
- /* one-way encryption. */
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1 \
- (UINT32_C(0x1) << 1)
- /* symmetric AES256 encryption. */
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_AES256 \
- (UINT32_C(0x2) << 1)
- /* SHA1 digest appended to plaintext contents, for authentication */
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH \
- (UINT32_C(0x3) << 1)
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_LAST \
- HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FLAGS_UNUSED_0_MASK \
- UINT32_C(0x70)
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FLAGS_UNUSED_0_SFT 4
- /* When this bit is 1, update the factory default region */
- #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FACTORY_DEFAULT \
- UINT32_C(0x80)
- uint8_t unused_0;
+ uint64_t host_dest_addr;
+ /* 32-bit NVRAM byte-offset to read from. */
+ uint32_t offset;
+ /* Total length of NVRAM contents to be read, in bytes. */
+ uint32_t len;
} __rte_packed;
-/* hwrm_nvm_set_variable_output (size:128b/16B) */
-struct hwrm_nvm_set_variable_output {
+/* hwrm_nvm_raw_dump_output (size:128b/16B) */
+struct hwrm_nvm_raw_dump_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -42238,31 +44541,13 @@ struct hwrm_nvm_set_variable_output {
uint8_t valid;
} __rte_packed;
-/* hwrm_nvm_set_variable_cmd_err (size:64b/8B) */
-struct hwrm_nvm_set_variable_cmd_err {
- /*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
- */
- uint8_t code;
- /* Unknown error */
- #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
- /* variable does not exist */
- #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1)
- /* configuration is corrupted and the variable cannot be saved */
- #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2)
- #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_LAST \
- HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR
- uint8_t unused_0[7];
-} __rte_packed;
-
/****************************
- * hwrm_nvm_validate_option *
+ * hwrm_nvm_get_dir_entries *
****************************/
-/* hwrm_nvm_validate_option_input (size:320b/40B) */
-struct hwrm_nvm_validate_option_input {
+/* hwrm_nvm_get_dir_entries_input (size:192b/24B) */
+struct hwrm_nvm_get_dir_entries_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -42292,43 +44577,14 @@ struct hwrm_nvm_validate_option_input {
*/
uint64_t resp_addr;
/*
- * This is the host address where
- * nvm variable will be copied from
- */
- uint64_t src_data_addr;
- /* size of data in bits */
- uint16_t data_len;
- /* nvm cfg option number */
- uint16_t option_num;
- /* reserved. */
- #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_0 \
- UINT32_C(0x0)
- /* reserved. */
- #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF \
- UINT32_C(0xffff)
- #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_LAST \
- HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF
- /*
- * Number of dimensions for this nvm configuration variable.
- * This value indicates how many of the indexN values to use.
- * A value of 0 means that none of the indexN values are valid.
- * A value of 1 requires at index0 is valued, a value of 2
- * requires that index0 and index1 are valid, and so forth
+ * 64-bit Host Destination Address.
+ * This is the host address where the directory will be written.
*/
- uint16_t dimensions;
- /* index for the 1st dimensions */
- uint16_t index_0;
- /* index for the 2nd dimensions */
- uint16_t index_1;
- /* index for the 3rd dimensions */
- uint16_t index_2;
- /* index for the 4th dimensions */
- uint16_t index_3;
- uint8_t unused_0[2];
+ uint64_t host_dest_addr;
} __rte_packed;
-/* hwrm_nvm_validate_option_output (size:128b/16B) */
-struct hwrm_nvm_validate_option_output {
+/* hwrm_nvm_get_dir_entries_output (size:128b/16B) */
+struct hwrm_nvm_get_dir_entries_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -42337,14 +44593,7 @@ struct hwrm_nvm_validate_option_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint8_t result;
- /* indicates that the value provided for the option is not matching with the saved data. */
- #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_NOT_MATCH UINT32_C(0x0)
- /* indicates that the value provided for the option is matching the saved data. */
- #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH UINT32_C(0x1)
- #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_LAST \
- HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH
- uint8_t unused_0[6];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -42355,27 +44604,13 @@ struct hwrm_nvm_validate_option_output {
uint8_t valid;
} __rte_packed;
-/* hwrm_nvm_validate_option_cmd_err (size:64b/8B) */
-struct hwrm_nvm_validate_option_cmd_err {
- /*
- * command specific error codes that goes to
- * the cmd_err field in Common HWRM Error Response.
- */
- uint8_t code;
- /* Unknown error */
- #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
- #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_LAST \
- HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN
- uint8_t unused_0[7];
-} __rte_packed;
-
-/****************
- * hwrm_oem_cmd *
- ****************/
+/*************************
+ * hwrm_nvm_get_dir_info *
+ *************************/
-/* hwrm_oem_cmd_input (size:1024b/128B) */
-struct hwrm_oem_cmd_input {
+/* hwrm_nvm_get_dir_info_input (size:128b/16B) */
+struct hwrm_nvm_get_dir_info_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -42404,14 +44639,10 @@ struct hwrm_oem_cmd_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t IANA;
- uint32_t unused_0;
- /* This field contains the vendor specific command data. */
- uint32_t oem_data[26];
} __rte_packed;
-/* hwrm_oem_cmd_output (size:768b/96B) */
-struct hwrm_oem_cmd_output {
+/* hwrm_nvm_get_dir_info_output (size:192b/24B) */
+struct hwrm_nvm_get_dir_info_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -42420,11 +44651,11 @@ struct hwrm_oem_cmd_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t IANA;
- uint32_t unused_0;
- /* This field contains the vendor specific response data. */
- uint32_t oem_data[18];
- uint8_t unused_1[7];
+ /* Number of directory entries in the directory. */
+ uint32_t entries;
+ /* Size of each directory entry, in bytes. */
+ uint32_t entry_length;
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -42435,150 +44666,13 @@ struct hwrm_oem_cmd_output {
uint8_t valid;
} __rte_packed;
-/*****************
- * hwrm_fw_reset *
+/******************
+ * hwrm_nvm_write *
******************/
-/* hwrm_fw_reset_input (size:192b/24B) */
-struct hwrm_fw_reset_input {
- /* The HWRM command request type. */
- uint16_t req_type;
- /*
- * The completion ring to send the completion event on. This should
- * be the NQ ID returned from the `nq_alloc` HWRM command.
- */
- uint16_t cmpl_ring;
- /*
- * The sequence ID is used by the driver for tracking multiple
- * commands. This ID is treated as opaque data by the firmware and
- * the value is returned in the `hwrm_resp_hdr` upon completion.
- */
- uint16_t seq_id;
- /*
- * The target ID of the command:
- * * 0x0-0xFFF8 - The function ID
- * * 0xFFF8-0xFFFE - Reserved for internal processors
- * * 0xFFFF - HWRM
- */
- uint16_t target_id;
- /*
- * A physical address pointer pointing to a host buffer that the
- * command's response data will be written. This can be either a host
- * physical address (HPA) or a guest physical address (GPA) and must
- * point to a physically contiguous block of memory.
- */
- uint64_t resp_addr;
- /* Type of embedded processor. */
- uint8_t embedded_proc_type;
- /* Boot Processor */
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_BOOT \
- UINT32_C(0x0)
- /* Management Processor */
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_MGMT \
- UINT32_C(0x1)
- /* Network control processor */
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_NETCTRL \
- UINT32_C(0x2)
- /* RoCE control processor */
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_ROCE \
- UINT32_C(0x3)
- /*
- * Host (in multi-host environment): This is only valid if requester is IPC.
- * Reinit host hardware resources and PCIe.
- */
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST \
- UINT32_C(0x4)
- /* AP processor complex (in multi-host environment). Use host_idx to control which core is reset */
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_AP \
- UINT32_C(0x5)
- /* Reset all blocks of the chip (including all processors) */
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_CHIP \
- UINT32_C(0x6)
- /*
- * Host (in multi-host environment): This is only valid if requester is IPC.
- * Reinit host hardware resources.
- */
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST_RESOURCE_REINIT \
- UINT32_C(0x7)
- #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_LAST \
- HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST_RESOURCE_REINIT
- /* Type of self reset. */
- uint8_t selfrst_status;
- /* No Self Reset */
- #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTNONE \
- UINT32_C(0x0)
- /* Self Reset as soon as possible to do so safely */
- #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTASAP \
- UINT32_C(0x1)
- /* Self Reset on PCIe Reset */
- #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTPCIERST \
- UINT32_C(0x2)
- /* Self Reset immediately after notification to all clients. */
- #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTIMMEDIATE \
- UINT32_C(0x3)
- #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_LAST \
- HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTIMMEDIATE
- /*
- * Indicate which host is being reset. 0 means first host.
- * Only valid when embedded_proc_type is host in multihost
- * environment
- */
- uint8_t host_idx;
- uint8_t flags;
- /*
- * When this bit is '1', then the core firmware initiates
- * the reset only after graceful shut down of all registered instances.
- * If not, the device will continue with the existing firmware.
- */
- #define HWRM_FW_RESET_INPUT_FLAGS_RESET_GRACEFUL UINT32_C(0x1)
- uint8_t unused_0[4];
-} __rte_packed;
-
-/* hwrm_fw_reset_output (size:128b/16B) */
-struct hwrm_fw_reset_output {
- /* The specific error status for the command. */
- uint16_t error_code;
- /* The HWRM command request type. */
- uint16_t req_type;
- /* The sequence ID from the original command. */
- uint16_t seq_id;
- /* The length of the response data in number of bytes. */
- uint16_t resp_len;
- /* Type of self reset. */
- uint8_t selfrst_status;
- /* No Self Reset */
- #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTNONE \
- UINT32_C(0x0)
- /* Self Reset as soon as possible to do so safely */
- #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTASAP \
- UINT32_C(0x1)
- /* Self Reset on PCIe Reset */
- #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTPCIERST \
- UINT32_C(0x2)
- /* Self Reset immediately after notification to all clients. */
- #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTIMMEDIATE \
- UINT32_C(0x3)
- #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_LAST \
- HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTIMMEDIATE
- uint8_t unused_0[6];
- /*
- * This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
- * to indicate that the output has been completely written.
- * When writing a command completion or response to an internal processor,
- * the order of writes has to be such that this field is written last.
- */
- uint8_t valid;
-} __rte_packed;
-
-/**********************
- * hwrm_port_ts_query *
- ***********************/
-
-
-/* hwrm_port_ts_query_input (size:192b/24B) */
-struct hwrm_port_ts_query_input {
+/* hwrm_nvm_write_input (size:384b/48B) */
+struct hwrm_nvm_write_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -42607,31 +44701,49 @@ struct hwrm_port_ts_query_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint32_t flags;
/*
- * Enumeration denoting the RX, TX type of the resource.
- * This enumeration is used for resources that are similar for both
- * TX and RX paths of the chip.
+ * 64-bit Host Source Address.
+ * This is where the source data is.
*/
- #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH 0x1UL
- /* tx path */
- #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_TX 0x0UL
- /* rx path */
- #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX 0x1UL
- #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_LAST \
- HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX
+ uint64_t host_src_addr;
+ /* The Directory Entry Type (valid values are defined in the bnxnvm_directory_type enum defined in the file bnxnvm_defs.h). */
+ uint16_t dir_type;
/*
- * If set, the response includes the current value of the free
- * running timer.
+ * Directory ordinal.
+ * The 0-based instance of the combined Directory Entry Type and Extension.
*/
- #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_CURRENT_TIME 0x2UL
- /* Port ID of port that is being queried. */
- uint16_t port_id;
- uint8_t unused_0[2];
+ uint16_t dir_ordinal;
+ /* The Directory Entry Extension flags (see BNX_DIR_EXT_* in the file bnxnvm_defs.h). */
+ uint16_t dir_ext;
+ /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* in the file bnxnvm_defs.h). */
+ uint16_t dir_attr;
+ /*
+ * Length of data to write, in bytes. May be less than or equal to the allocated size for the directory entry.
+ * The data length stored in the directory entry will be updated to reflect this value once the write is complete.
+ */
+ uint32_t dir_data_length;
+ /* Option. */
+ uint16_t option;
+ uint16_t flags;
+ /*
+ * When this bit is '1', the original active image
+ * will not be removed. TBD: what purpose is this?
+ */
+ #define HWRM_NVM_WRITE_INPUT_FLAGS_KEEP_ORIG_ACTIVE_IMG \
+ UINT32_C(0x1)
+ /*
+ * The requested length of the allocated NVM for the item, in bytes. This value may be greater than or equal to the specified data length (dir_data_length).
+ * If this value is less than the specified data length, it will be ignored.
+ * The response will contain the actual allocated item length, which may be greater than the requested item length.
+ * The purpose for allocating more than the required number of bytes for an item's data is to pre-allocate extra storage (padding) to accommodate
+ * the potential future growth of an item (e.g. upgraded firmware with a size increase, log growth, expanded configuration data).
+ */
+ uint32_t dir_item_length;
+ uint32_t unused_0;
} __rte_packed;
-/* hwrm_port_ts_query_output (size:192b/24B) */
-struct hwrm_port_ts_query_output {
+/* hwrm_nvm_write_output (size:128b/16B) */
+struct hwrm_nvm_write_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -42641,13 +44753,13 @@ struct hwrm_port_ts_query_output {
/* The length of the response data in number of bytes. */
uint16_t resp_len;
/*
- * Timestamp value of PTP message captured, or current value of
- * free running timer.
+ * Length of the allocated NVM for the item, in bytes. The value may be greater than or equal to the specified data length or the requested item length.
+ * The actual item length used when creating a new directory entry will be a multiple of an NVM block size.
*/
- uint32_t ptp_msg_ts[2];
- /* Sequence ID of the PTP message captured. */
- uint16_t ptp_msg_seqid;
- uint8_t unused_0[5];
+ uint32_t dir_item_length;
+ /* The directory index of the created or modified item. */
+ uint16_t dir_idx;
+ uint8_t unused_0;
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -42655,65 +44767,34 @@ struct hwrm_port_ts_query_output {
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
*/
- uint8_t valid;
+ uint8_t valid;
} __rte_packed;
-/*
- * This structure is fixed at the beginning of the ChiMP SRAM (GRC
- * offset: 0x31001F0). Host software is expected to read from this
- * location for a defined signature. If it exists, the software can
- * assume the presence of this structure and the validity of the
- * FW_STATUS location in the next field.
- */
-/* hcomm_status (size:64b/8B) */
-struct hcomm_status {
- uint32_t sig_ver;
- /*
- * This field defines the version of the structure. The latest
- * version value is 1.
- */
- #define HCOMM_STATUS_VER_MASK UINT32_C(0xff)
- #define HCOMM_STATUS_VER_SFT 0
- #define HCOMM_STATUS_VER_LATEST UINT32_C(0x1)
- #define HCOMM_STATUS_VER_LAST HCOMM_STATUS_VER_LATEST
- /*
- * This field is to store the signature value to indicate the
- * presence of the structure.
- */
- #define HCOMM_STATUS_SIGNATURE_MASK UINT32_C(0xffffff00)
- #define HCOMM_STATUS_SIGNATURE_SFT 8
- #define HCOMM_STATUS_SIGNATURE_VAL (UINT32_C(0x484353) << 8)
- #define HCOMM_STATUS_SIGNATURE_LAST HCOMM_STATUS_SIGNATURE_VAL
- uint32_t fw_status_loc;
- #define HCOMM_STATUS_TRUE_ADDR_SPACE_MASK UINT32_C(0x3)
- #define HCOMM_STATUS_TRUE_ADDR_SPACE_SFT 0
- /* PCIE configuration space */
- #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_PCIE_CFG UINT32_C(0x0)
- /* GRC space */
- #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_GRC UINT32_C(0x1)
- /* BAR0 space */
- #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR0 UINT32_C(0x2)
- /* BAR1 space */
- #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR1 UINT32_C(0x3)
- #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_LAST \
- HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR1
+/* hwrm_nvm_write_cmd_err (size:64b/8B) */
+struct hwrm_nvm_write_cmd_err {
/*
- * This offset where the fw_status register is located. The value
- * is generally 4-byte aligned.
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
*/
- #define HCOMM_STATUS_TRUE_OFFSET_MASK UINT32_C(0xfffffffc)
- #define HCOMM_STATUS_TRUE_OFFSET_SFT 2
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_NVM_WRITE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /* Unable to complete operation due to fragmentation */
+ #define HWRM_NVM_WRITE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1)
+ /* nvm is completely full. */
+ #define HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2)
+ #define HWRM_NVM_WRITE_CMD_ERR_CODE_LAST \
+ HWRM_NVM_WRITE_CMD_ERR_CODE_NO_SPACE
+ uint8_t unused_0[7];
} __rte_packed;
-/* This is the GRC offset where the hcomm_status struct resides. */
-#define HCOMM_STATUS_STRUCT_LOC 0x31001F0UL
-/**************************
- * hwrm_cfa_counter_qcaps *
- **************************/
+/*******************
+ * hwrm_nvm_modify *
+ *******************/
-/* hwrm_cfa_counter_qcaps_input (size:128b/16B) */
-struct hwrm_cfa_counter_qcaps_input {
+/* hwrm_nvm_modify_input (size:320b/40B) */
+struct hwrm_nvm_modify_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -42742,10 +44823,42 @@ struct hwrm_cfa_counter_qcaps_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
+ /*
+ * 64-bit Host Source Address.
+ * This is where the modified data is.
+ */
+ uint64_t host_src_addr;
+ /* 16-bit directory entry index. */
+ uint16_t dir_idx;
+ uint16_t flags;
+ /*
+ * This flag indicates the sender wants to modify a continuous NVRAM
+ * area using a batch of this HWRM requests. The offset of a request
+ * must be continuous to the end of previous request's. Firmware does
+ * not update the directory entry until receiving the last request,
+ * which is indicated by the batch_last flag.
+ * This flag is set usually when a sender does not have a block of
+ * memory that is big enough to hold the entire NVRAM data for send
+ * at one time.
+ */
+ #define HWRM_NVM_MODIFY_INPUT_FLAGS_BATCH_MODE UINT32_C(0x1)
+ /*
+ * This flag can be used only when the batch_mode flag is set.
+ * It indicates this request is the last of batch requests.
+ */
+ #define HWRM_NVM_MODIFY_INPUT_FLAGS_BATCH_LAST UINT32_C(0x2)
+ /* 32-bit NVRAM byte-offset to modify content from. */
+ uint32_t offset;
+ /*
+ * Length of data to be modified, in bytes. The length shall
+ * be non-zero.
+ */
+ uint32_t len;
+ uint8_t unused_1[4];
} __rte_packed;
-/* hwrm_cfa_counter_qcaps_output (size:576b/72B) */
-struct hwrm_cfa_counter_qcaps_output {
+/* hwrm_nvm_modify_output (size:128b/16B) */
+struct hwrm_nvm_modify_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -42754,46 +44867,7 @@ struct hwrm_cfa_counter_qcaps_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- uint32_t flags;
- /* Enumeration denoting the supported CFA counter format. */
- #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT \
- UINT32_C(0x1)
- /* CFA counter types are not supported. */
- #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_NONE \
- UINT32_C(0x0)
- /* 64-bit packet counters followed by 64-bit byte counters format. */
- #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT \
- UINT32_C(0x1)
- #define HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_LAST \
- HWRM_CFA_COUNTER_QCAPS_OUTPUT_FLAGS_COUNTER_FORMAT_64_BIT
- uint32_t unused_0;
- /* Minimum guaranteed number of flow counters supported for this function, in RX direction. */
- uint32_t min_rx_fc;
- /* Maximum non-guaranteed number of flow counters supported for this function, in RX direction. */
- uint32_t max_rx_fc;
- /* Minimum guaranteed number of flow counters supported for this function, in TX direction. */
- uint32_t min_tx_fc;
- /* Maximum non-guaranteed number of flow counters supported for this function, in TX direction. */
- uint32_t max_tx_fc;
- /* Minimum guaranteed number of extension flow counters supported for this function, in RX direction. */
- uint32_t min_rx_efc;
- /* Maximum non-guaranteed number of extension flow counters supported for this function, in RX direction. */
- uint32_t max_rx_efc;
- /* Minimum guaranteed number of extension flow counters supported for this function, in TX direction. */
- uint32_t min_tx_efc;
- /* Maximum non-guaranteed number of extension flow counters supported for this function, in TX direction. */
- uint32_t max_tx_efc;
- /* Minimum guaranteed number of meter drop counters supported for this function, in RX direction. */
- uint32_t min_rx_mdc;
- /* Maximum non-guaranteed number of meter drop counters supported for this function, in RX direction. */
- uint32_t max_rx_mdc;
- /* Minimum guaranteed number of meter drop counters supported for this function, in TX direction. */
- uint32_t min_tx_mdc;
- /* Maximum non-guaranteed number of meter drop counters supported for this function, in TX direction. */
- uint32_t max_tx_mdc;
- /* Maximum guaranteed number of flow counters which can be used during flow alloc. */
- uint32_t max_flow_alloc_fc;
- uint8_t unused_1[3];
+ uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
* is completely written to RAM. This field should be read as '1'
@@ -42804,13 +44878,13 @@ struct hwrm_cfa_counter_qcaps_output {
uint8_t valid;
} __rte_packed;
-/************************
- * hwrm_cfa_counter_cfg *
- ************************/
+/***************************
+ * hwrm_nvm_find_dir_entry *
+ ***************************/
-/* hwrm_cfa_counter_cfg_input (size:256b/32B) */
-struct hwrm_cfa_counter_cfg_input {
+/* hwrm_nvm_find_dir_entry_input (size:256b/32B) */
+struct hwrm_nvm_find_dir_entry_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -42839,64 +44913,42 @@ struct hwrm_cfa_counter_cfg_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint16_t flags;
- /* Enumeration denoting the configuration mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE \
- UINT32_C(0x1)
- /* Disable the configuration mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_DISABLE \
- UINT32_C(0x0)
- /* Enable the configuration mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE \
+ uint32_t enables;
+ /*
+ * This bit must be '1' for the dir_idx_valid field to be
+ * configured.
+ */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_ENABLES_DIR_IDX_VALID \
UINT32_C(0x1)
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_LAST \
- HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_CFG_MODE_ENABLE
- /* Enumeration denoting the RX, TX type of the resource. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH \
- UINT32_C(0x2)
- /* Tx path. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_TX \
- (UINT32_C(0x0) << 1)
- /* Rx path. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX \
- (UINT32_C(0x1) << 1)
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_PATH_RX
- /* Enumeration denoting the data transfer mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_MASK \
- UINT32_C(0xc)
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_SFT 2
- /* Push mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PUSH \
- (UINT32_C(0x0) << 2)
- /* Pull mode. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL \
- (UINT32_C(0x1) << 2)
- /* Pull on async update. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC \
- (UINT32_C(0x2) << 2)
- #define HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_LAST \
- HWRM_CFA_COUNTER_CFG_INPUT_FLAGS_DATA_TRANSFER_MODE_PULL_ASYNC
- uint16_t counter_type;
- /* Flow counters. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_FC UINT32_C(0x0)
- /* Extended flow counters. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_EFC UINT32_C(0x1)
- /* Meter drop counters. */
- #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC UINT32_C(0x2)
- #define HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_LAST \
- HWRM_CFA_COUNTER_CFG_INPUT_COUNTER_TYPE_MDC
- /* Ctx memory handle to be used for the counter. */
- uint16_t ctx_id;
- /* Counter update cadence hint (only in Push mode). */
- uint16_t update_tmr_ms;
- /* Total number of entries. */
- uint32_t num_entries;
- uint32_t unused_0;
+ /* Directory Entry Index */
+ uint16_t dir_idx;
+ /* Directory Entry (Image) Type */
+ uint16_t dir_type;
+ /*
+ * Directory ordinal.
+ * The instance of this Directory Type
+ */
+ uint16_t dir_ordinal;
+ /* The Directory Entry Extension flags. */
+ uint16_t dir_ext;
+ /* This value indicates the search option using dir_ordinal. */
+ uint8_t opt_ordinal;
+ /* This value indicates the search option using dir_ordinal. */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_MASK UINT32_C(0x3)
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_SFT 0
+ /* Equal to specified ordinal value. */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_EQ UINT32_C(0x0)
+ /* Greater than or equal to specified ordinal value */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GE UINT32_C(0x1)
+ /* Greater than specified ordinal value */
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT UINT32_C(0x2)
+ #define HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_LAST \
+ HWRM_NVM_FIND_DIR_ENTRY_INPUT_OPT_ORDINAL_GT
+ uint8_t unused_0[3];
} __rte_packed;
-/* hwrm_cfa_counter_cfg_output (size:128b/16B) */
-struct hwrm_cfa_counter_cfg_output {
+/* hwrm_nvm_find_dir_entry_output (size:256b/32B) */
+struct hwrm_nvm_find_dir_entry_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -42905,6 +44957,19 @@ struct hwrm_cfa_counter_cfg_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
+ /* Allocated NVRAM for this directory entry, in bytes. */
+ uint32_t dir_item_length;
+ /* Size of the stored data for this directory entry, in bytes. */
+ uint32_t dir_data_length;
+ /*
+ * Firmware version.
+ * Only valid if the directory entry is for embedded firmware stored in APE_BIN Format.
+ */
+ uint32_t fw_ver;
+ /* Directory ordinal. */
+ uint16_t dir_ordinal;
+ /* Directory Entry Index */
+ uint16_t dir_idx;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
@@ -42916,13 +44981,13 @@ struct hwrm_cfa_counter_cfg_output {
uint8_t valid;
} __rte_packed;
-/***************************
- * hwrm_cfa_counter_qstats *
- ***************************/
+/****************************
+ * hwrm_nvm_erase_dir_entry *
+ ****************************/
-/* hwrm_cfa_counter_qstats_input (size:320b/40B) */
-struct hwrm_cfa_counter_qstats_input {
+/* hwrm_nvm_erase_dir_entry_input (size:192b/24B) */
+struct hwrm_nvm_erase_dir_entry_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -42951,27 +45016,13 @@ struct hwrm_cfa_counter_qstats_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- uint16_t flags;
- /* Enumeration denoting the RX, TX type of the resource. */
- #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH UINT32_C(0x1)
- /* Tx path. */
- #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_TX UINT32_C(0x0)
- /* Rx path. */
- #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX UINT32_C(0x1)
- #define HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_LAST \
- HWRM_CFA_COUNTER_QSTATS_INPUT_FLAGS_PATH_RX
- uint16_t counter_type;
- uint16_t input_flow_ctx_id;
- uint16_t num_entries;
- uint16_t delta_time_ms;
- uint16_t meter_instance_id;
- uint16_t mdc_ctx_id;
- uint8_t unused_0[2];
- uint64_t expected_count;
+ /* Directory Entry Index */
+ uint16_t dir_idx;
+ uint8_t unused_0[6];
} __rte_packed;
-/* hwrm_cfa_counter_qstats_output (size:128b/16B) */
-struct hwrm_cfa_counter_qstats_output {
+/* hwrm_nvm_erase_dir_entry_output (size:128b/16B) */
+struct hwrm_nvm_erase_dir_entry_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -42991,13 +45042,13 @@ struct hwrm_cfa_counter_qstats_output {
uint8_t valid;
} __rte_packed;
-/***********************
- * hwrm_cfa_pair_alloc *
- ***********************/
+/*************************
+ * hwrm_nvm_get_dev_info *
+ *************************/
-/* hwrm_cfa_pair_alloc_input (size:576b/72B) */
-struct hwrm_cfa_pair_alloc_input {
+/* hwrm_nvm_get_dev_info_input (size:128b/16B) */
+struct hwrm_nvm_get_dev_info_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -43026,104 +45077,256 @@ struct hwrm_cfa_pair_alloc_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /*
- * Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair,
- * 5-rep2fn_mod, 6-rep2fn_modall, 7-rep2fn_truflow).
+} __rte_packed;
+
+/* hwrm_nvm_get_dev_info_output (size:640b/80B) */
+struct hwrm_nvm_get_dev_info_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Manufacturer ID. */
+ uint16_t manufacturer_id;
+ /* Device ID. */
+ uint16_t device_id;
+ /* Sector size of the NVRAM device. */
+ uint32_t sector_size;
+ /* Total size, in bytes of the NVRAM device. */
+ uint32_t nvram_size;
+ uint32_t reserved_size;
+ /* Available size that can be used, in bytes. Available size is the NVRAM size take away the used size and reserved size. */
+ uint32_t available_size;
+ /* This field represents the major version of NVM cfg */
+ uint8_t nvm_cfg_ver_maj;
+ /* This field represents the minor version of NVM cfg */
+ uint8_t nvm_cfg_ver_min;
+ /* This field represents the update version of NVM cfg */
+ uint8_t nvm_cfg_ver_upd;
+ uint8_t flags;
+ /*
+ * If set to 1, firmware will provide various firmware version
+ * information stored in the flash.
*/
- uint16_t pair_mode;
- /* Pair between VF on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_VF2FN \
- UINT32_C(0x0)
- /* Pair between REP on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN \
+ #define HWRM_NVM_GET_DEV_INFO_OUTPUT_FLAGS_FW_VER_VALID \
UINT32_C(0x1)
- /* Pair between REP on local host with REP on specified host. */
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2REP \
- UINT32_C(0x2)
- /* Pair for the proxy interface. */
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PROXY \
- UINT32_C(0x3)
- /* Pair for the PF interface. */
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_PFPAIR \
- UINT32_C(0x4)
- /* Modify existing rep2fn pair and move pair to new PF. */
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MOD \
- UINT32_C(0x5)
- /* Modify existing rep2fn pairs paired with same PF and move pairs to new PF. */
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_MODALL \
- UINT32_C(0x6)
- /* Truflow pair between REP on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_TRUFLOW \
- UINT32_C(0x7)
- #define HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_LAST \
- HWRM_CFA_PAIR_ALLOC_INPUT_PAIR_MODE_REP2FN_TRUFLOW
- /* Logical VF number (range: 0 -> MAX_VFS -1). */
- uint16_t vf_a_id;
- /* Logical Host (0xff-local host). */
- uint8_t host_b_id;
- /* Logical PF (0xff-PF for command channel). */
- uint8_t pf_b_id;
- /* Logical VF number (range: 0 -> MAX_VFS -1). */
- uint16_t vf_b_id;
- /* Loopback port (0xff-internal loopback), valid for mode-3. */
- uint8_t port_id;
- /* Priority used for encap of loopback packets valid for mode-3. */
- uint8_t pri;
- /* New PF for rep2fn modify, valid for mode 5. */
- uint16_t new_pf_fid;
+ /*
+ * This field represents the board package name stored in the flash.
+ * (ASCII chars with NULL at the end).
+ */
+ char pkg_name[16];
+ /*
+ * This field represents the major version of HWRM firmware, stored in
+ * the flash.
+ */
+ uint16_t hwrm_fw_major;
+ /*
+ * This field represents the minor version of HWRM firmware, stored in
+ * the flash.
+ */
+ uint16_t hwrm_fw_minor;
+ /*
+ * This field represents the build version of HWRM firmware, stored in
+ * the flash.
+ */
+ uint16_t hwrm_fw_build;
+ /*
+ * This field can be used to represent firmware branches or customer
+ * specific releases tied to a specific (major, minor, build) version
+ * of the HWRM firmware.
+ */
+ uint16_t hwrm_fw_patch;
+ /*
+ * This field represents the major version of mgmt firmware, stored in
+ * the flash.
+ */
+ uint16_t mgmt_fw_major;
+ /*
+ * This field represents the minor version of mgmt firmware, stored in
+ * the flash.
+ */
+ uint16_t mgmt_fw_minor;
+ /*
+ * This field represents the build version of mgmt firmware, stored in
+ * the flash.
+ */
+ uint16_t mgmt_fw_build;
+ /*
+ * This field can be used to represent firmware branches or customer
+ * specific releases tied to a specific (major, minor, build) version
+ * of the mgmt firmware.
+ */
+ uint16_t mgmt_fw_patch;
+ /*
+ * This field represents the major version of roce firmware, stored in
+ * the flash.
+ */
+ uint16_t roce_fw_major;
+ /*
+ * This field represents the minor version of roce firmware, stored in
+ * the flash.
+ */
+ uint16_t roce_fw_minor;
+ /*
+ * This field represents the build version of roce firmware, stored in
+ * the flash.
+ */
+ uint16_t roce_fw_build;
+ /*
+ * This field can be used to represent firmware branches or customer
+ * specific releases tied to a specific (major, minor, build) version
+ * of the roce firmware.
+ */
+ uint16_t roce_fw_patch;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_nvm_mod_dir_entry *
+ **************************/
+
+
+/* hwrm_nvm_mod_dir_entry_input (size:256b/32B) */
+struct hwrm_nvm_mod_dir_entry_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
uint32_t enables;
/*
- * This bit must be '1' for the q_ab field to be
+ * This bit must be '1' for the checksum field to be
* configured.
*/
- #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_AB_VALID UINT32_C(0x1)
+ #define HWRM_NVM_MOD_DIR_ENTRY_INPUT_ENABLES_CHECKSUM UINT32_C(0x1)
+ /* Directory Entry Index */
+ uint16_t dir_idx;
/*
- * This bit must be '1' for the q_ba field to be
- * configured.
+ * Directory ordinal.
+ * The (0-based) instance of this Directory Type.
*/
- #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_Q_BA_VALID UINT32_C(0x2)
+ uint16_t dir_ordinal;
+ /* The Directory Entry Extension flags (see BNX_DIR_EXT_* for extension flag definitions). */
+ uint16_t dir_ext;
+ /* Directory Entry Attribute flags (see BNX_DIR_ATTR_* for attribute flag definitions). */
+ uint16_t dir_attr;
/*
- * This bit must be '1' for the fc_ab field to be
- * configured.
+ * If valid, then this field updates the checksum
+ * value of the content in the directory entry.
*/
- #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_AB_VALID UINT32_C(0x4)
+ uint32_t checksum;
+} __rte_packed;
+
+/* hwrm_nvm_mod_dir_entry_output (size:128b/16B) */
+struct hwrm_nvm_mod_dir_entry_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
/*
- * This bit must be '1' for the fc_ba field to be
- * configured.
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
*/
- #define HWRM_CFA_PAIR_ALLOC_INPUT_ENABLES_FC_BA_VALID UINT32_C(0x8)
- /* VF Pair name (32 byte string). */
- char pair_name[32];
+ uint8_t valid;
+} __rte_packed;
+
+/**************************
+ * hwrm_nvm_verify_update *
+ **************************/
+
+
+/* hwrm_nvm_verify_update_input (size:192b/24B) */
+struct hwrm_nvm_verify_update_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
/*
- * The q_ab value specifies the logical index of the TX/RX CoS
- * queue to be assigned for traffic in the A to B direction of
- * the interface pair. The default value is 0.
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
*/
- uint8_t q_ab;
+ uint16_t cmpl_ring;
/*
- * The q_ba value specifies the logical index of the TX/RX CoS
- * queue to be assigned for traffic in the B to A direction of
- * the interface pair. The default value is 1.
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
*/
- uint8_t q_ba;
+ uint16_t seq_id;
/*
- * Specifies whether RX ring flow control is disabled (0) or enabled
- * (1) in the A to B direction. The default value is 0, meaning that
- * packets will be dropped when the B-side RX rings are full.
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
*/
- uint8_t fc_ab;
+ uint16_t target_id;
/*
- * Specifies whether RX ring flow control is disabled (0) or enabled
- * (1) in the B to A direction. The default value is 1, meaning that
- * the RX CoS queue will be flow controlled when the A-side RX rings
- * are full.
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
*/
- uint8_t fc_ba;
- uint8_t unused_1[4];
+ uint64_t resp_addr;
+ /* Directory Entry Type, to be verified. */
+ uint16_t dir_type;
+ /*
+ * Directory ordinal.
+ * The instance of the Directory Type to be verified.
+ */
+ uint16_t dir_ordinal;
+ /*
+ * The Directory Entry Extension flags.
+ * The "UPDATE" extension flag must be set in this value.
+ * A corresponding directory entry with the same type and ordinal values but *without*
+ * the "UPDATE" extension flag must also exist. The other flags of the extension must
+ * be identical between the active and update entries.
+ */
+ uint16_t dir_ext;
+ uint8_t unused_0[2];
} __rte_packed;
-/* hwrm_cfa_pair_alloc_output (size:192b/24B) */
-struct hwrm_cfa_pair_alloc_output {
+/* hwrm_nvm_verify_update_output (size:128b/16B) */
+struct hwrm_nvm_verify_update_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -43132,18 +45335,10 @@ struct hwrm_cfa_pair_alloc_output {
uint16_t seq_id;
/* The length of the response data in number of bytes. */
uint16_t resp_len;
- /* Only valid for modes 1 and 2. */
- uint16_t rx_cfa_code_a;
- /* Only valid for modes 1 and 2. */
- uint16_t tx_cfa_action_a;
- /* Only valid for mode 2. */
- uint16_t rx_cfa_code_b;
- /* Only valid for mode 2. */
- uint16_t tx_cfa_action_b;
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
@@ -43151,13 +45346,13 @@ struct hwrm_cfa_pair_alloc_output {
uint8_t valid;
} __rte_packed;
-/**********************
- * hwrm_cfa_pair_free *
- **********************/
+/***************************
+ * hwrm_nvm_install_update *
+ ***************************/
-/* hwrm_cfa_pair_free_input (size:448b/56B) */
-struct hwrm_cfa_pair_free_input {
+/* hwrm_nvm_install_update_input (size:192b/24B) */
+struct hwrm_nvm_install_update_input {
/* The HWRM command request type. */
uint16_t req_type;
/*
@@ -43186,40 +45381,181 @@ struct hwrm_cfa_pair_free_input {
* point to a physically contiguous block of memory.
*/
uint64_t resp_addr;
- /* VF Pair name (32 byte string). */
- char pair_name[32];
- /* Logical PF (0xff-PF for command channel). */
- uint8_t pf_b_id;
- uint8_t unused_0[3];
- /* Logical VF number (range: 0 -> MAX_VFS -1). */
- uint16_t vf_id;
/*
- * Pair mode (0-vf2fn, 1-rep2fn, 2-rep2rep, 3-proxy, 4-pfpair,
- * 5-rep2fn_mod, 6-rep2fn_modall, 7-rep2fn_truflow).
+ * Installation type. If the value 3 through 0xffff is used,
+ * only packaged items with that type value will be installed and
+ * conditional installation directives for those packaged items
+ * will be over-ridden (i.e. 'create' or 'replace' will be treated
+ * as 'install').
*/
- uint16_t pair_mode;
- /* Pair between VF on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_VF2FN UINT32_C(0x0)
- /* Pair between REP on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN UINT32_C(0x1)
- /* Pair between REP on local host with REP on specified host. */
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2REP UINT32_C(0x2)
- /* Pair for the proxy interface. */
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_PROXY UINT32_C(0x3)
- /* Pair for the PF interface. */
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_PFPAIR UINT32_C(0x4)
- /* Modify existing rep2fn pair and move pair to new PF. */
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_MOD UINT32_C(0x5)
- /* Modify existing rep2fn pairs paired with same PF and move pairs to new PF. */
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_MODALL UINT32_C(0x6)
- /* Truflow pair between REP on local host with PF or VF on specified host. */
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_TRUFLOW UINT32_C(0x7)
- #define HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_LAST \
- HWRM_CFA_PAIR_FREE_INPUT_PAIR_MODE_REP2FN_TRUFLOW
+ uint32_t install_type;
+ /*
+ * Perform a normal package installation. Conditional installation
+ * directives (e.g. 'create' and 'replace') of packaged items
+ * will be followed.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_NORMAL UINT32_C(0x0)
+ /*
+ * Install all packaged items regardless of installation directive
+ * (i.e. treat all packaged items as though they have an installation
+ * directive of 'install').
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL \
+ UINT32_C(0xffffffff)
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_LAST \
+ HWRM_NVM_INSTALL_UPDATE_INPUT_INSTALL_TYPE_ALL
+ uint16_t flags;
+ /* If set to 1, then securely erase all unused locations in persistent storage. */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ERASE_UNUSED_SPACE \
+ UINT32_C(0x1)
+ /*
+ * If set to 1, then unspecified images, images not in the package file, will be safely deleted.
+ * When combined with erase_unused_space then unspecified images will be securely erased.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_REMOVE_UNUSED_PKG \
+ UINT32_C(0x2)
+ /*
+ * If set to 1, FW will defragment the NVM if defragmentation is required for the update.
+ * Allow additional time for this command to complete if this bit is set to 1.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_ALLOWED_TO_DEFRAG \
+ UINT32_C(0x4)
+ /*
+ * If set to 1, FW will verify the package in the "UPDATE" NVM item
+ * without installing it. This flag is for FW internal use only.
+ * Users should not set this flag. The request will otherwise fail.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_INPUT_FLAGS_VERIFY_ONLY \
+ UINT32_C(0x8)
+ uint8_t unused_0[2];
} __rte_packed;
-/* hwrm_cfa_pair_free_output (size:128b/16B) */
-struct hwrm_cfa_pair_free_output {
+/* hwrm_nvm_install_update_output (size:192b/24B) */
+struct hwrm_nvm_install_update_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Bit-mask of successfully installed items.
+ * Bit-0 corresponding to the first packaged item, Bit-1 for the second item, etc.
+ * A value of 0 indicates that no items were successfully installed.
+ */
+ uint64_t installed_items;
+ /* result is 8 b */
+ uint8_t result;
+ /* There was no problem with the package installation. */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS UINT32_C(0x0)
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_LAST \
+ HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESULT_SUCCESS
+ /* problem_item is 8 b */
+ uint8_t problem_item;
+ /* There was no problem with any packaged items. */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_NONE \
+ UINT32_C(0x0)
+ /* There was a problem with the NVM package itself. */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE \
+ UINT32_C(0xff)
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_LAST \
+ HWRM_NVM_INSTALL_UPDATE_OUTPUT_PROBLEM_ITEM_PACKAGE
+ /* reset_required is 8 b */
+ uint8_t reset_required;
+ /*
+ * No reset is required for installed/updated firmware or
+ * microcode to take effect.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_NONE \
+ UINT32_C(0x0)
+ /*
+ * A PCIe reset (e.g. system reboot) is
+ * required for newly installed/updated firmware or
+ * microcode to take effect.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_PCI \
+ UINT32_C(0x1)
+ /*
+ * A controller power reset (e.g. system power-cycle) is
+ * required for newly installed/updated firmware or
+ * microcode to take effect. Some newly installed/updated
+ * firmware or microcode may still take effect upon the
+ * next PCIe reset.
+ */
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER \
+ UINT32_C(0x2)
+ #define HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_LAST \
+ HWRM_NVM_INSTALL_UPDATE_OUTPUT_RESET_REQUIRED_POWER
+ uint8_t unused_0[4];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_nvm_install_update_cmd_err (size:64b/8B) */
+struct hwrm_nvm_install_update_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /* Unable to complete operation due to fragmentation */
+ #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_FRAG_ERR UINT32_C(0x1)
+ /* nvm is completely full. */
+ #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE UINT32_C(0x2)
+ #define HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_LAST \
+ HWRM_NVM_INSTALL_UPDATE_CMD_ERR_CODE_NO_SPACE
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/******************
+ * hwrm_nvm_flush *
+ ******************/
+
+
+/* hwrm_nvm_flush_input (size:128b/16B) */
+struct hwrm_nvm_flush_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+} __rte_packed;
+
+/* hwrm_nvm_flush_output (size:128b/16B) */
+struct hwrm_nvm_flush_output {
/* The specific error status for the command. */
uint16_t error_code;
/* The HWRM command request type. */
@@ -43231,7 +45567,7 @@ struct hwrm_cfa_pair_free_output {
uint8_t unused_0[7];
/*
* This field is used in Output records to indicate that the output
- * is completely written to RAM. This field should be read as '1'
+ * is completely written to RAM. This field should be read as '1'
* to indicate that the output has been completely written.
* When writing a command completion or response to an internal processor,
* the order of writes has to be such that this field is written last.
@@ -43239,4 +45575,743 @@ struct hwrm_cfa_pair_free_output {
uint8_t valid;
} __rte_packed;
+/* hwrm_nvm_flush_cmd_err (size:64b/8B) */
+struct hwrm_nvm_flush_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_NVM_FLUSH_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /* flush could not be performed */
+ #define HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL UINT32_C(0x1)
+ #define HWRM_NVM_FLUSH_CMD_ERR_CODE_LAST \
+ HWRM_NVM_FLUSH_CMD_ERR_CODE_FAIL
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/*************************
+ * hwrm_nvm_get_variable *
+ *************************/
+
+
+/* hwrm_nvm_get_variable_input (size:320b/40B) */
+struct hwrm_nvm_get_variable_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where
+ * nvm variable will be stored
+ */
+ uint64_t dest_data_addr;
+ /* size of data in bits */
+ uint16_t data_len;
+ /* nvm cfg option number */
+ uint16_t option_num;
+ /* reserved. */
+ #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0)
+ /* reserved. */
+ #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \
+ UINT32_C(0xffff)
+ #define HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_LAST \
+ HWRM_NVM_GET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF
+ /*
+ * Number of dimensions for this nvm configuration variable.
+ * This value indicates how many of the indexN values to use.
+ * A value of 0 means that none of the indexN values are valid.
+ * A value of 1 requires at index0 is valued, a value of 2
+ * requires that index0 and index1 are valid, and so forth
+ */
+ uint16_t dimensions;
+ /* index for the 1st dimensions */
+ uint16_t index_0;
+ /* index for the 2nd dimensions */
+ uint16_t index_1;
+ /* index for the 3rd dimensions */
+ uint16_t index_2;
+ /* index for the 4th dimensions */
+ uint16_t index_3;
+ uint8_t flags;
+ /*
+ * When this bit is set to 1, the factory default value will be returned,
+ * 0 returns the operational value.
+ */
+ #define HWRM_NVM_GET_VARIABLE_INPUT_FLAGS_FACTORY_DFLT \
+ UINT32_C(0x1)
+ uint8_t unused_0;
+} __rte_packed;
+
+/* hwrm_nvm_get_variable_output (size:128b/16B) */
+struct hwrm_nvm_get_variable_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* size of data of the actual variable retrieved in bits */
+ uint16_t data_len;
+ /*
+ * option_num is the option number for the data retrieved. It is possible in the
+ * future that the option number returned would be different than requested. This
+ * condition could occur if an option is deprecated and a new option id is defined
+ * with similar characteristics, but has a slightly different definition. This
+ * also makes it convenient for the caller to identify the variable result with
+ * the option id from the response.
+ */
+ uint16_t option_num;
+ /* reserved. */
+ #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0)
+ /* reserved. */
+ #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF \
+ UINT32_C(0xffff)
+ #define HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_LAST \
+ HWRM_NVM_GET_VARIABLE_OUTPUT_OPTION_NUM_RSVD_FFFF
+ uint8_t unused_0[3];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_nvm_get_variable_cmd_err (size:64b/8B) */
+struct hwrm_nvm_get_variable_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /* variable does not exist */
+ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1)
+ /* configuration is corrupted and the variable cannot be saved */
+ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2)
+ /* length specified is too small */
+ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT UINT32_C(0x3)
+ #define HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LAST \
+ HWRM_NVM_GET_VARIABLE_CMD_ERR_CODE_LEN_TOO_SHORT
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/*************************
+ * hwrm_nvm_set_variable *
+ *************************/
+
+
+/* hwrm_nvm_set_variable_input (size:320b/40B) */
+struct hwrm_nvm_set_variable_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where
+ * nvm variable will be copied from
+ */
+ uint64_t src_data_addr;
+ /* size of data in bits */
+ uint16_t data_len;
+ /* nvm cfg option number */
+ uint16_t option_num;
+ /* reserved. */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_0 UINT32_C(0x0)
+ /* reserved. */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF \
+ UINT32_C(0xffff)
+ #define HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_LAST \
+ HWRM_NVM_SET_VARIABLE_INPUT_OPTION_NUM_RSVD_FFFF
+ /*
+ * Number of dimensions for this nvm configuration variable.
+ * This value indicates how many of the indexN values to use.
+ * A value of 0 means that none of the indexN values are valid.
+ * A value of 1 requires at index0 is valued, a value of 2
+ * requires that index0 and index1 are valid, and so forth
+ */
+ uint16_t dimensions;
+ /* index for the 1st dimensions */
+ uint16_t index_0;
+ /* index for the 2nd dimensions */
+ uint16_t index_1;
+ /* index for the 3rd dimensions */
+ uint16_t index_2;
+ /* index for the 4th dimensions */
+ uint16_t index_3;
+ uint8_t flags;
+ /* When this bit is 1, flush internal cache after this write operation (see hwrm_nvm_flush command.) */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FORCE_FLUSH \
+ UINT32_C(0x1)
+ /* encryption method */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_MASK \
+ UINT32_C(0xe)
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_SFT 1
+ /* No encryption. */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_NONE \
+ (UINT32_C(0x0) << 1)
+ /* one-way encryption. */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1 \
+ (UINT32_C(0x1) << 1)
+ /* symmetric AES256 encryption. */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_AES256 \
+ (UINT32_C(0x2) << 1)
+ /* SHA1 digest appended to plaintext contents, for authentication */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH \
+ (UINT32_C(0x3) << 1)
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_LAST \
+ HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_ENCRYPT_MODE_HMAC_SHA1_AUTH
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FLAGS_UNUSED_0_MASK \
+ UINT32_C(0x70)
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FLAGS_UNUSED_0_SFT 4
+ /* When this bit is 1, update the factory default region */
+ #define HWRM_NVM_SET_VARIABLE_INPUT_FLAGS_FACTORY_DEFAULT \
+ UINT32_C(0x80)
+ uint8_t unused_0;
+} __rte_packed;
+
+/* hwrm_nvm_set_variable_output (size:128b/16B) */
+struct hwrm_nvm_set_variable_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t unused_0[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_nvm_set_variable_cmd_err (size:64b/8B) */
+struct hwrm_nvm_set_variable_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ /* variable does not exist */
+ #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_VAR_NOT_EXIST UINT32_C(0x1)
+ /* configuration is corrupted and the variable cannot be saved */
+ #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR UINT32_C(0x2)
+ #define HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_LAST \
+ HWRM_NVM_SET_VARIABLE_CMD_ERR_CODE_CORRUPT_VAR
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/****************************
+ * hwrm_nvm_validate_option *
+ ****************************/
+
+
+/* hwrm_nvm_validate_option_input (size:320b/40B) */
+struct hwrm_nvm_validate_option_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /*
+ * This is the host address where
+ * nvm variable will be copied from
+ */
+ uint64_t src_data_addr;
+ /* size of data in bits */
+ uint16_t data_len;
+ /* nvm cfg option number */
+ uint16_t option_num;
+ /* reserved. */
+ #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_0 \
+ UINT32_C(0x0)
+ /* reserved. */
+ #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF \
+ UINT32_C(0xffff)
+ #define HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_LAST \
+ HWRM_NVM_VALIDATE_OPTION_INPUT_OPTION_NUM_RSVD_FFFF
+ /*
+ * Number of dimensions for this nvm configuration variable.
+ * This value indicates how many of the indexN values to use.
+ * A value of 0 means that none of the indexN values are valid.
+ * A value of 1 requires at index0 is valued, a value of 2
+ * requires that index0 and index1 are valid, and so forth
+ */
+ uint16_t dimensions;
+ /* index for the 1st dimensions */
+ uint16_t index_0;
+ /* index for the 2nd dimensions */
+ uint16_t index_1;
+ /* index for the 3rd dimensions */
+ uint16_t index_2;
+ /* index for the 4th dimensions */
+ uint16_t index_3;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_nvm_validate_option_output (size:128b/16B) */
+struct hwrm_nvm_validate_option_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint8_t result;
+ /* indicates that the value provided for the option is not matching with the saved data. */
+ #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_NOT_MATCH UINT32_C(0x0)
+ /* indicates that the value provided for the option is matching the saved data. */
+ #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH UINT32_C(0x1)
+ #define HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_LAST \
+ HWRM_NVM_VALIDATE_OPTION_OUTPUT_RESULT_MATCH
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/* hwrm_nvm_validate_option_cmd_err (size:64b/8B) */
+struct hwrm_nvm_validate_option_cmd_err {
+ /*
+ * command specific error codes that goes to
+ * the cmd_err field in Common HWRM Error Response.
+ */
+ uint8_t code;
+ /* Unknown error */
+ #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN UINT32_C(0x0)
+ #define HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_LAST \
+ HWRM_NVM_VALIDATE_OPTION_CMD_ERR_CODE_UNKNOWN
+ uint8_t unused_0[7];
+} __rte_packed;
+
+/****************
+ * hwrm_oem_cmd *
+ ****************/
+
+
+/* hwrm_oem_cmd_input (size:1024b/128B) */
+struct hwrm_oem_cmd_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t IANA;
+ uint32_t unused_0;
+ /* This field contains the vendor specific command data. */
+ uint32_t oem_data[26];
+} __rte_packed;
+
+/* hwrm_oem_cmd_output (size:768b/96B) */
+struct hwrm_oem_cmd_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ uint32_t IANA;
+ uint32_t unused_0;
+ /* This field contains the vendor specific response data. */
+ uint32_t oem_data[18];
+ uint8_t unused_1[7];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*****************
+ * hwrm_fw_reset *
+ ******************/
+
+
+/* hwrm_fw_reset_input (size:192b/24B) */
+struct hwrm_fw_reset_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFE - Reserved for internal processors
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ /* Type of embedded processor. */
+ uint8_t embedded_proc_type;
+ /* Boot Processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_BOOT \
+ UINT32_C(0x0)
+ /* Management Processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_MGMT \
+ UINT32_C(0x1)
+ /* Network control processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_NETCTRL \
+ UINT32_C(0x2)
+ /* RoCE control processor */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_ROCE \
+ UINT32_C(0x3)
+ /*
+ * Host (in multi-host environment): This is only valid if requester is IPC.
+ * Reinit host hardware resources and PCIe.
+ */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST \
+ UINT32_C(0x4)
+ /* AP processor complex (in multi-host environment). Use host_idx to control which core is reset */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_AP \
+ UINT32_C(0x5)
+ /* Reset all blocks of the chip (including all processors) */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_CHIP \
+ UINT32_C(0x6)
+ /*
+ * Host (in multi-host environment): This is only valid if requester is IPC.
+ * Reinit host hardware resources.
+ */
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST_RESOURCE_REINIT \
+ UINT32_C(0x7)
+ #define HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_LAST \
+ HWRM_FW_RESET_INPUT_EMBEDDED_PROC_TYPE_HOST_RESOURCE_REINIT
+ /* Type of self reset. */
+ uint8_t selfrst_status;
+ /* No Self Reset */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTNONE \
+ UINT32_C(0x0)
+ /* Self Reset as soon as possible to do so safely */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTASAP \
+ UINT32_C(0x1)
+ /* Self Reset on PCIe Reset */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTPCIERST \
+ UINT32_C(0x2)
+ /* Self Reset immediately after notification to all clients. */
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTIMMEDIATE \
+ UINT32_C(0x3)
+ #define HWRM_FW_RESET_INPUT_SELFRST_STATUS_LAST \
+ HWRM_FW_RESET_INPUT_SELFRST_STATUS_SELFRSTIMMEDIATE
+ /*
+ * Indicate which host is being reset. 0 means first host.
+ * Only valid when embedded_proc_type is host in multihost
+ * environment
+ */
+ uint8_t host_idx;
+ uint8_t flags;
+ /*
+ * When this bit is '1', then the core firmware initiates
+ * the reset only after graceful shut down of all registered instances.
+ * If not, the device will continue with the existing firmware.
+ */
+ #define HWRM_FW_RESET_INPUT_FLAGS_RESET_GRACEFUL UINT32_C(0x1)
+ uint8_t unused_0[4];
+} __rte_packed;
+
+/* hwrm_fw_reset_output (size:128b/16B) */
+struct hwrm_fw_reset_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /* Type of self reset. */
+ uint8_t selfrst_status;
+ /* No Self Reset */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTNONE \
+ UINT32_C(0x0)
+ /* Self Reset as soon as possible to do so safely */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTASAP \
+ UINT32_C(0x1)
+ /* Self Reset on PCIe Reset */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTPCIERST \
+ UINT32_C(0x2)
+ /* Self Reset immediately after notification to all clients. */
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTIMMEDIATE \
+ UINT32_C(0x3)
+ #define HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_LAST \
+ HWRM_FW_RESET_OUTPUT_SELFRST_STATUS_SELFRSTIMMEDIATE
+ uint8_t unused_0[6];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/**********************
+ * hwrm_port_ts_query *
+ ***********************/
+
+
+/* hwrm_port_ts_query_input (size:192b/24B) */
+struct hwrm_port_ts_query_input {
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /*
+ * The completion ring to send the completion event on. This should
+ * be the NQ ID returned from the `nq_alloc` HWRM command.
+ */
+ uint16_t cmpl_ring;
+ /*
+ * The sequence ID is used by the driver for tracking multiple
+ * commands. This ID is treated as opaque data by the firmware and
+ * the value is returned in the `hwrm_resp_hdr` upon completion.
+ */
+ uint16_t seq_id;
+ /*
+ * The target ID of the command:
+ * * 0x0-0xFFF8 - The function ID
+ * * 0xFFF8-0xFFFC, 0xFFFE - Reserved for internal processors
+ * * 0xFFFD - Reserved for user-space HWRM interface
+ * * 0xFFFF - HWRM
+ */
+ uint16_t target_id;
+ /*
+ * A physical address pointer pointing to a host buffer that the
+ * command's response data will be written. This can be either a host
+ * physical address (HPA) or a guest physical address (GPA) and must
+ * point to a physically contiguous block of memory.
+ */
+ uint64_t resp_addr;
+ uint32_t flags;
+ /*
+ * Enumeration denoting the RX, TX type of the resource.
+ * This enumeration is used for resources that are similar for both
+ * TX and RX paths of the chip.
+ */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH 0x1UL
+ /* tx path */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_TX 0x0UL
+ /* rx path */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX 0x1UL
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_LAST \
+ HWRM_PORT_TS_QUERY_INPUT_FLAGS_PATH_RX
+ /*
+ * If set, the response includes the current value of the free
+ * running timer.
+ */
+ #define HWRM_PORT_TS_QUERY_INPUT_FLAGS_CURRENT_TIME 0x2UL
+ /* Port ID of port that is being queried. */
+ uint16_t port_id;
+ uint8_t unused_0[2];
+} __rte_packed;
+
+/* hwrm_port_ts_query_output (size:192b/24B) */
+struct hwrm_port_ts_query_output {
+ /* The specific error status for the command. */
+ uint16_t error_code;
+ /* The HWRM command request type. */
+ uint16_t req_type;
+ /* The sequence ID from the original command. */
+ uint16_t seq_id;
+ /* The length of the response data in number of bytes. */
+ uint16_t resp_len;
+ /*
+ * Timestamp value of PTP message captured, or current value of
+ * free running timer.
+ */
+ uint32_t ptp_msg_ts[2];
+ /* Sequence ID of the PTP message captured. */
+ uint16_t ptp_msg_seqid;
+ uint8_t unused_0[5];
+ /*
+ * This field is used in Output records to indicate that the output
+ * is completely written to RAM. This field should be read as '1'
+ * to indicate that the output has been completely written.
+ * When writing a command completion or response to an internal processor,
+ * the order of writes has to be such that this field is written last.
+ */
+ uint8_t valid;
+} __rte_packed;
+
+/*
+ * This structure is fixed at the beginning of the ChiMP SRAM (GRC
+ * offset: 0x31001F0). Host software is expected to read from this
+ * location for a defined signature. If it exists, the software can
+ * assume the presence of this structure and the validity of the
+ * FW_STATUS location in the next field.
+ */
+/* hcomm_status (size:64b/8B) */
+struct hcomm_status {
+ uint32_t sig_ver;
+ /*
+ * This field defines the version of the structure. The latest
+ * version value is 1.
+ */
+ #define HCOMM_STATUS_VER_MASK UINT32_C(0xff)
+ #define HCOMM_STATUS_VER_SFT 0
+ #define HCOMM_STATUS_VER_LATEST UINT32_C(0x1)
+ #define HCOMM_STATUS_VER_LAST HCOMM_STATUS_VER_LATEST
+ /*
+ * This field is to store the signature value to indicate the
+ * presence of the structure.
+ */
+ #define HCOMM_STATUS_SIGNATURE_MASK UINT32_C(0xffffff00)
+ #define HCOMM_STATUS_SIGNATURE_SFT 8
+ #define HCOMM_STATUS_SIGNATURE_VAL (UINT32_C(0x484353) << 8)
+ #define HCOMM_STATUS_SIGNATURE_LAST HCOMM_STATUS_SIGNATURE_VAL
+ uint32_t fw_status_loc;
+ #define HCOMM_STATUS_TRUE_ADDR_SPACE_MASK UINT32_C(0x3)
+ #define HCOMM_STATUS_TRUE_ADDR_SPACE_SFT 0
+ /* PCIE configuration space */
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_PCIE_CFG UINT32_C(0x0)
+ /* GRC space */
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_GRC UINT32_C(0x1)
+ /* BAR0 space */
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR0 UINT32_C(0x2)
+ /* BAR1 space */
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR1 UINT32_C(0x3)
+ #define HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_LAST \
+ HCOMM_STATUS_FW_STATUS_LOC_ADDR_SPACE_BAR1
+ /*
+ * This offset where the fw_status register is located. The value
+ * is generally 4-byte aligned.
+ */
+ #define HCOMM_STATUS_TRUE_OFFSET_MASK UINT32_C(0xfffffffc)
+ #define HCOMM_STATUS_TRUE_OFFSET_SFT 2
+} __rte_packed;
+/* This is the GRC offset where the hcomm_status struct resides. */
+#define HCOMM_STATUS_STRUCT_LOC 0x31001F0UL
#endif /* _HSI_STRUCT_DEF_DPDK_H_ */
--
2.21.1 (Apple Git-122.3)
^ permalink raw reply [flat|nested] 13+ messages in thread