DPDK patches and discussions
 help / color / Atom feed
From: Ophir Munk <ophirmu@nvidia.com>
To: dev@dpdk.org, Ferruh Yigit <ferruh.yigit@intel.com>,
	Olivier Matz <olivier.matz@6wind.com>,
	Wenzhuo Lu <wenzhuo.lu@intel.com>,
	Jingjing Wu <jingjing.wu@intel.com>,
	Bernard Iremonger <bernard.iremonger@intel.com>
Cc: Ophir Munk <ophirmu@mellanox.com>
Subject: [dpdk-dev] [PATCH v7 1/3] app/testpmd: add GENEVE parsing
Date: Thu,  8 Oct 2020 20:16:54 +0000
Message-ID: <20201008201656.19865-2-ophirmu@nvidia.com> (raw)
In-Reply-To: <20201008201656.19865-1-ophirmu@nvidia.com>

From: Ophir Munk <ophirmu@mellanox.com>

GENEVE is a widely used tunneling protocol in modern Virtualized
Networks. testpmd already supports parsing of several tunneling
protocols including VXLAN, VXLAN-GPE, GRE. This commit adds GENEVE
parsing of inner protocols (IPv4-0x0800, IPv6-0x86dd, Ethernet-0x6558)
based on IETF draft-ietf-nvo3-geneve-09. GENEVE is considered more
flexible than the other protocols.  In terms of protocol format GENEVE
header has a variable length options as opposed to other tunneling
protocols which have a fixed header size.

Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
---
 app/test-pmd/csumonly.c                     | 70 ++++++++++++++++++++++++++++-
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  6 +--
 lib/librte_net/meson.build                  |  3 +-
 lib/librte_net/rte_geneve.h                 | 66 +++++++++++++++++++++++++++
 5 files changed, 141 insertions(+), 5 deletions(-)
 create mode 100644 lib/librte_net/rte_geneve.h

diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c
index 7ece398..a9f33c6 100644
--- a/app/test-pmd/csumonly.c
+++ b/app/test-pmd/csumonly.c
@@ -43,6 +43,7 @@
 #include <rte_flow.h>
 #include <rte_gro.h>
 #include <rte_gso.h>
+#include <rte_geneve.h>
 
 #include "testpmd.h"
 
@@ -63,6 +64,7 @@
 #endif
 
 uint16_t vxlan_gpe_udp_port = 4790;
+uint16_t geneve_udp_port = RTE_GENEVE_DEFAULT_PORT;
 
 /* structure that caches offload info for the current packet */
 struct testpmd_offload_info {
@@ -333,6 +335,64 @@ parse_vxlan_gpe(struct rte_udp_hdr *udp_hdr,
 	info->l2_len += RTE_ETHER_VXLAN_GPE_HLEN;
 }
 
+/* Fill in outer layers length */
+static void
+update_tunnel_outer(struct testpmd_offload_info *info)
+{
+	info->is_tunnel = 1;
+	info->outer_ethertype = info->ethertype;
+	info->outer_l2_len = info->l2_len;
+	info->outer_l3_len = info->l3_len;
+	info->outer_l4_proto = info->l4_proto;
+}
+
+/* Parse a geneve header */
+static void
+parse_geneve(struct rte_udp_hdr *udp_hdr,
+	    struct testpmd_offload_info *info)
+{
+	struct rte_ether_hdr *eth_hdr;
+	struct rte_ipv4_hdr *ipv4_hdr;
+	struct rte_ipv6_hdr *ipv6_hdr;
+	struct rte_geneve_hdr *geneve_hdr;
+	uint16_t geneve_len;
+
+	/* Check udp destination port. */
+	if (udp_hdr->dst_port != _htons(geneve_udp_port))
+		return;
+
+	geneve_hdr = (struct rte_geneve_hdr *)((char *)udp_hdr +
+				sizeof(struct rte_udp_hdr));
+	geneve_len = sizeof(struct rte_geneve_hdr) + geneve_hdr->opt_len * 4;
+	if (!geneve_hdr->proto || geneve_hdr->proto ==
+	    _htons(RTE_ETHER_TYPE_IPV4)) {
+		update_tunnel_outer(info);
+		ipv4_hdr = (struct rte_ipv4_hdr *)((char *)geneve_hdr +
+			   geneve_len);
+		parse_ipv4(ipv4_hdr, info);
+		info->ethertype = _htons(RTE_ETHER_TYPE_IPV4);
+		info->l2_len = 0;
+	} else if (geneve_hdr->proto == _htons(RTE_ETHER_TYPE_IPV6)) {
+		update_tunnel_outer(info);
+		ipv6_hdr = (struct rte_ipv6_hdr *)((char *)geneve_hdr +
+			   geneve_len);
+		info->ethertype = _htons(RTE_ETHER_TYPE_IPV6);
+		parse_ipv6(ipv6_hdr, info);
+		info->l2_len = 0;
+
+	} else if (geneve_hdr->proto == _htons(RTE_GENEVE_TYPE_ETH)) {
+		update_tunnel_outer(info);
+		eth_hdr = (struct rte_ether_hdr *)((char *)geneve_hdr +
+			  geneve_len);
+		parse_ethernet(eth_hdr, info);
+	} else
+		return;
+
+	info->l2_len +=
+		(sizeof(struct rte_udp_hdr) + sizeof(struct rte_geneve_hdr) +
+		((struct rte_geneve_hdr *)geneve_hdr)->opt_len * 4);
+}
+
 /* Parse a gre header */
 static void
 parse_gre(struct simple_gre_hdr *gre_hdr, struct testpmd_offload_info *info)
@@ -865,9 +925,17 @@ pkt_burst_checksum_forward(struct fwd_stream *fs)
 				}
 				parse_vxlan(udp_hdr, &info,
 					    m->packet_type);
-				if (info.is_tunnel)
+				if (info.is_tunnel) {
 					tx_ol_flags |=
 						PKT_TX_TUNNEL_VXLAN;
+					goto tunnel_update;
+				}
+				parse_geneve(udp_hdr, &info);
+				if (info.is_tunnel) {
+					tx_ol_flags |=
+						PKT_TX_TUNNEL_GENEVE;
+					goto tunnel_update;
+				}
 			} else if (info.l4_proto == IPPROTO_GRE) {
 				struct simple_gre_hdr *gre_hdr;
 
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index c7e7e41..14aae7c 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -452,6 +452,7 @@ extern struct fwd_lcore  **fwd_lcores;
 extern struct fwd_stream **fwd_streams;
 
 extern uint16_t vxlan_gpe_udp_port; /**< UDP port of tunnel VXLAN-GPE. */
+extern uint16_t geneve_udp_port; /**< UDP port of tunnel GENEVE. */
 
 extern portid_t nb_peer_eth_addrs; /**< Number of peer ethernet addresses. */
 extern struct rte_ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 72bdb1b..c448e2d 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1135,11 +1135,11 @@ Where:
 * ``ip|udp|tcp|sctp`` always relate to  the inner layer.
 
 * ``outer-ip`` relates to the outer IP layer (only for IPv4) in the case where the packet is recognized
-  as a tunnel packet by the forwarding engine (vxlan, gre and ipip are
+  as a tunnel packet by the forwarding engine (vxlan, gre, ipip and geneve are
   supported). See also the ``csum parse-tunnel`` command.
 
 * ``outer-udp`` relates to the outer UDP layer in the case where the packet is recognized
-  as a tunnel packet by the forwarding engine (vxlan, vxlan-gpe are
+  as a tunnel packet by the forwarding engine (vxlan, vxlan-gpe, geneve are
   supported). See also the ``csum parse-tunnel`` command.
 
 .. note::
@@ -1199,7 +1199,7 @@ engine::
    testpmd> csum parse-tunnel (on|off) (tx_port_id)
 
 If enabled, the csum forward engine will try to recognize supported
-tunnel headers (vxlan, gre, ipip).
+tunnel headers (vxlan, gre, ipip, geneve).
 
 If disabled, treat tunnel packets as non-tunneled packets (a inner
 header is handled as a packet payload).
diff --git a/lib/librte_net/meson.build b/lib/librte_net/meson.build
index 24ed825..52d3a97 100644
--- a/lib/librte_net/meson.build
+++ b/lib/librte_net/meson.build
@@ -16,7 +16,8 @@ headers = files('rte_ip.h',
 	'rte_net_crc.h',
 	'rte_mpls.h',
 	'rte_higig.h',
-	'rte_ecpri.h')
+	'rte_ecpri.h',
+	'rte_geneve.h')
 
 sources = files('rte_arp.c', 'rte_ether.c', 'rte_net.c', 'rte_net_crc.c')
 deps += ['mbuf']
diff --git a/lib/librte_net/rte_geneve.h b/lib/librte_net/rte_geneve.h
new file mode 100644
index 0000000..bb67724
--- /dev/null
+++ b/lib/librte_net/rte_geneve.h
@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+
+#ifndef _RTE_GENEVE_H_
+#define _RTE_GENEVE_H_
+
+/**
+ * @file
+ *
+ * GENEVE-related definitions
+ */
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/** GENEVE default port. */
+#define RTE_GENEVE_DEFAULT_PORT 6081
+
+/**
+ * GENEVE protocol header. (draft-ietf-nvo3-geneve-09)
+ * Contains:
+ * 2-bits version (must be 0).
+ * 6-bits option length in four byte multiples, not including the eight
+ *	bytes of the fixed tunnel header.
+ * 1-bit control packet.
+ * 1-bit critical options in packet.
+ * 6-bits reserved
+ * 16-bits Protocol Type. The protocol data unit after the Geneve header
+ *	following the EtherType convention. Ethernet itself is represented by
+ *	the value 0x6558.
+ * 24-bits Virtual Network Identifier (VNI). Virtual network unique identified.
+ * 8-bits reserved bits (must be 0 on transmission and ignored on receipt).
+ * More-bits (optional) variable length options.
+ */
+__extension__
+struct rte_geneve_hdr {
+#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
+	uint8_t ver:2;		/**< Version. */
+	uint8_t opt_len:6;	/**< Options length. */
+	uint8_t oam:1;		/**< Control packet. */
+	uint8_t critical:1;	/**< Critical packet. */
+	uint8_t reserved1:6;	/**< Reserved. */
+#else
+	uint8_t opt_len:6;	/**< Options length. */
+	uint8_t ver:2;		/**< Version. */
+	uint8_t reserved1:6;	/**< Reserved. */
+	uint8_t critical:1;	/**< Critical packet. */
+	uint8_t oam:1;		/**< Control packet. */
+#endif
+	rte_be16_t proto;	/**< Protocol type. */
+	uint8_t vni[3];		/**< Virtual network identifier. */
+	uint8_t reserved2;	/**< Reserved. */
+	uint32_t opts[];	/**< Variable length options. */
+} __rte_packed;
+
+/* GENEVE ETH next protocol types */
+#define RTE_GENEVE_TYPE_ETH	0x6558 /**< Ethernet Protocol. */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* RTE_GENEVE_H_ */
-- 
2.8.4


  reply index

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29  8:29 [dpdk-dev] [PATCH v1 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-07-29  8:29 ` [dpdk-dev] [PATCH v1 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-27  7:02   ` [dpdk-dev] [PATCH v2 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-14 17:27       ` Ferruh Yigit
2020-09-15 12:53       ` [dpdk-dev] [PATCH v3 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-15 13:17           ` [dpdk-dev] [PATCH v4 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-09-15 13:56               ` Ophir Munk
2020-09-17 12:23               ` Olivier Matz
2020-09-18 14:21                 ` Ophir Munk
2020-09-18 14:17               ` [dpdk-dev] [PATCH v5 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-06 14:30                   ` Ferruh Yigit
2020-10-07 14:52                     ` Ophir Munk
2020-10-07 16:25                       ` Ferruh Yigit
2020-10-08  8:44                         ` Ophir Munk
2020-10-08 13:37                           ` Ferruh Yigit
2020-10-07 15:30                   ` [dpdk-dev] [PATCH v6 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 1/3] app/testpmd: add GENEVE parsing Ophir Munk
2020-10-08 20:16                       ` [dpdk-dev] [PATCH v7 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk
2020-10-08 20:16                         ` Ophir Munk [this message]
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-10-08 20:16                         ` [dpdk-dev] [PATCH v7 3/3] app/testpmd: tunnel parsing protocols cleanup Ophir Munk
2020-10-09 12:49                         ` [dpdk-dev] [PATCH v7 0/3] Add GENEVE protocol parsing to testpmd Ferruh Yigit
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-10-07 15:30                     ` [dpdk-dev] [PATCH v6 3/3] app/testpmd: tunnel parsing protocols cleanup Ophir Munk
2020-10-07 16:05                       ` Ferruh Yigit
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-18 14:17                 ` [dpdk-dev] [PATCH v5 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-10-06 14:30                   ` Ferruh Yigit
2020-10-07 10:56                     ` Ophir Munk
2020-10-06 14:58                 ` [dpdk-dev] [PATCH v5 0/3] Add GENEVE protocol parsing to testpmd Ferruh Yigit
2020-10-07 15:43                   ` Ophir Munk
2020-10-07 16:00                     ` Ferruh Yigit
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-15 13:17             ` [dpdk-dev] [PATCH v4 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-15 12:53         ` [dpdk-dev] [PATCH v3 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 2/3] app/testpmd: enable configuring GENEVE port Ophir Munk
2020-09-14 17:31       ` Ferruh Yigit
2020-09-15  8:46         ` Ophir Munk
2020-09-15 11:07           ` Ferruh Yigit
2020-09-15 12:59             ` Ophir Munk
2020-09-15 13:19               ` Ophir Munk
2020-08-27  7:02     ` [dpdk-dev] [PATCH v2 3/3] app/testpmd: reduce tunnel parsing code duplication Ophir Munk
2020-08-31  6:40     ` [dpdk-dev] [PATCH v2 0/3] Add GENEVE protocol parsing to testpmd Ophir Munk

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201008201656.19865-2-ophirmu@nvidia.com \
    --to=ophirmu@nvidia.com \
    --cc=bernard.iremonger@intel.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jingjing.wu@intel.com \
    --cc=olivier.matz@6wind.com \
    --cc=ophirmu@mellanox.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

Archives are clonable:
	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev


Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/ public-inbox