From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v3 01/56] net/txgbe: add build and doc infrastructure
Date: Wed, 14 Oct 2020 13:54:22 +0800 [thread overview]
Message-ID: <20201014055517.1214386-2-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20201014055517.1214386-1-jiawenwu@trustnetic.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for txgbe PMD.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
MAINTAINERS | 7 ++++++
doc/guides/nics/features/txgbe.ini | 11 +++++++++
doc/guides/nics/txgbe.rst | 27 +++++++++++++++++++++
drivers/net/meson.build | 1 +
drivers/net/txgbe/meson.build | 7 ++++++
drivers/net/txgbe/rte_pmd_txgbe_version.map | 3 +++
drivers/net/txgbe/txgbe_ethdev.c | 4 +++
drivers/net/txgbe/txgbe_ethdev.h | 4 +++
8 files changed, 64 insertions(+)
create mode 100644 doc/guides/nics/features/txgbe.ini
create mode 100644 doc/guides/nics/txgbe.rst
create mode 100644 drivers/net/txgbe/meson.build
create mode 100644 drivers/net/txgbe/rte_pmd_txgbe_version.map
create mode 100644 drivers/net/txgbe/txgbe_ethdev.c
create mode 100644 drivers/net/txgbe/txgbe_ethdev.h
diff --git a/MAINTAINERS b/MAINTAINERS
index 75a17d51c..433b1d72c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -857,6 +857,13 @@ F: drivers/net/sfc/
F: doc/guides/nics/sfc_efx.rst
F: doc/guides/nics/features/sfc_efx.ini
+Wangxun txgbe
+M: Jiawen Wu <jiawenwu@trustnetic.com>
+M: Jian Wang <jianwang@trustnetic.com>
+F: drivers/net/txgbe/
+F: doc/guides/nics/txgbe.rst
+F: doc/guides/nics/features/txgbe.ini
+
VMware vmxnet3
M: Yong Wang <yongwang@vmware.com>
F: drivers/net/vmxnet3/
diff --git a/doc/guides/nics/features/txgbe.ini b/doc/guides/nics/features/txgbe.ini
new file mode 100644
index 000000000..76c43c7f1
--- /dev/null
+++ b/doc/guides/nics/features/txgbe.ini
@@ -0,0 +1,11 @@
+;
+; Supported features of the 'txgbe' network poll mode driver.
+;
+; Refer to default.ini for the full list of available PMD features.
+;
+[Features]
+Linux UIO = Y
+Linux VFIO = Y
+ARMv8 = Y
+x86-32 = Y
+x86-64 = Y
diff --git a/doc/guides/nics/txgbe.rst b/doc/guides/nics/txgbe.rst
new file mode 100644
index 000000000..e3b9f1858
--- /dev/null
+++ b/doc/guides/nics/txgbe.rst
@@ -0,0 +1,27 @@
+.. SPDX-License-Identifier: BSD-3-Clause
+ Copyright(c) 2015-2020.
+
+TXGBE Poll Mode Driver
+======================
+
+The TXGBE PMD (librte_pmd_txgbe) provides poll mode driver support
+for Wangxun 10 Gigabit Ethernet NICs.
+
+Prerequisites
+-------------
+
+- Learning about Wangxun 10 Gigabit Ethernet NICs using
+ `<https://www.net-swift.com/a/383.html>`_.
+
+- Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to setup the basic DPDK environment.
+
+Driver compilation and testing
+------------------------------
+
+Refer to the document :ref:`compiling and testing a PMD for a NIC <pmd_build_and_test>`
+for details.
+
+Limitations or Known issues
+---------------------------
+Build with ICC is not supported yet.
+X86-32, Power8, ARMv7 and BSD are not supported yet.
diff --git a/drivers/net/meson.build b/drivers/net/meson.build
index d56b24051..8a240134f 100644
--- a/drivers/net/meson.build
+++ b/drivers/net/meson.build
@@ -50,6 +50,7 @@ drivers = ['af_packet',
'szedata2',
'tap',
'thunderx',
+ 'txgbe',
'vdev_netvsc',
'vhost',
'virtio',
diff --git a/drivers/net/txgbe/meson.build b/drivers/net/txgbe/meson.build
new file mode 100644
index 000000000..d5b19af31
--- /dev/null
+++ b/drivers/net/txgbe/meson.build
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: BSD-3-Clause
+# Copyright(c) 2015-2020
+
+sources = files(
+ 'txgbe_ethdev.c',
+)
+
diff --git a/drivers/net/txgbe/rte_pmd_txgbe_version.map b/drivers/net/txgbe/rte_pmd_txgbe_version.map
new file mode 100644
index 000000000..4a76d1d52
--- /dev/null
+++ b/drivers/net/txgbe/rte_pmd_txgbe_version.map
@@ -0,0 +1,3 @@
+DPDK_21 {
+ local: *;
+};
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
new file mode 100644
index 000000000..cb758762d
--- /dev/null
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -0,0 +1,4 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2020
+ */
+
diff --git a/drivers/net/txgbe/txgbe_ethdev.h b/drivers/net/txgbe/txgbe_ethdev.h
new file mode 100644
index 000000000..cb758762d
--- /dev/null
+++ b/drivers/net/txgbe/txgbe_ethdev.h
@@ -0,0 +1,4 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2020
+ */
+
--
2.18.4
next prev parent reply other threads:[~2020-10-14 5:54 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-14 5:54 [dpdk-dev] [PATCH v3 00/56] net: txgbe PMD Jiawen Wu
2020-10-14 5:54 ` Jiawen Wu [this message]
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 02/56] net/txgbe: add ethdev probe and remove Jiawen Wu
2020-10-15 0:56 ` Ferruh Yigit
2020-10-16 9:52 ` Jiawen Wu
2020-10-16 10:33 ` Ferruh Yigit
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 03/56] net/txgbe: add device init and uninit Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 04/56] net/txgbe: add error types and registers Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 05/56] net/txgbe: add MAC type and bus lan id Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 06/56] net/txgbe: add HW infrastructure and dummy function Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 07/56] net/txgbe: add EEPROM functions Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 08/56] net/txgbe: add HW init and reset operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 09/56] net/txgbe: add PHY init Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 10/56] net/txgbe: add module identify Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 11/56] net/txgbe: add PHY reset Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 12/56] net/txgbe: add info get operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 13/56] net/txgbe: add interrupt operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 14/56] net/txgbe: add device configure operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 15/56] net/txgbe: add link status change Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 16/56] net/txgbe: add multi-speed link setup Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 17/56] net/txgbe: add autoc read and write Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 18/56] net/txgbe: add MAC address operations Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 19/56] net/txgbe: add unicast hash bitmap Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 20/56] net/txgbe: add Rx and Tx init Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 21/56] net/txgbe: add Rx and Tx queues setup and release Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 22/56] net/txgbe: add Rx and Tx start and stop Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 23/56] net/txgbe: add packet type Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 24/56] net/txgbe: fill simple transmit function Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 25/56] net/txgbe: fill transmit function with hardware offload Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 26/56] net/txgbe: fill Tx prepare function Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 27/56] net/txgbe: fill receive functions Jiawen Wu
2020-10-15 0:55 ` Ferruh Yigit
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 28/56] net/txgbe: add device start operation Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 29/56] net/txgbe: add Rx and Tx data path start and stop Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 30/56] net/txgbe: add device stop and close operations Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 31/56] net/txgbe: support Rx interrupt Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 32/56] net/txgbe: add Rx and Tx queue info get Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 33/56] net/txgbe: add device stats get Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 34/56] net/txgbe: add device xstats get Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 35/56] net/txgbe: add queue stats mapping Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 36/56] net/txgbe: add VLAN handle support Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 37/56] net/txgbe: add SWFW semaphore and lock Jiawen Wu
2020-10-14 5:54 ` [dpdk-dev] [PATCH v3 38/56] net/txgbe: add PF module init and uninit for SRIOV Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 39/56] net/txgbe: add process mailbox operation Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 40/56] net/txgbe: add PF module configure for SRIOV Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 41/56] net/txgbe: add VMDq configure Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 42/56] net/txgbe: add RSS support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 43/56] net/txgbe: add DCB support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 44/56] net/txgbe: add flow control support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 45/56] net/txgbe: add FC auto negotiation support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 46/56] net/txgbe: add priority flow control support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 47/56] net/txgbe: add device promiscuous and allmulticast mode Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 48/56] net/txgbe: add MTU set operation Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 49/56] net/txgbe: add FW version get operation Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 50/56] net/txgbe: add EEPROM info " Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 51/56] net/txgbe: add register dump support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 52/56] net/txgbe: support device LED on and off Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 53/56] net/txgbe: add mirror rule operations Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 54/56] net/txgbe: add PTP support Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 55/56] net/txgbe: add DCB info get operation Jiawen Wu
2020-10-14 5:55 ` [dpdk-dev] [PATCH v3 56/56] net/txgbe: add Rx and Tx descriptor status Jiawen Wu
2020-10-15 0:55 ` Ferruh Yigit
2020-10-15 0:56 ` [dpdk-dev] [PATCH v3 00/56] net: txgbe PMD Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201014055517.1214386-2-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).