From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v4 12/58] net/txgbe: add info get operation
Date: Mon, 19 Oct 2020 16:53:29 +0800 [thread overview]
Message-ID: <20201019085415.82207-13-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20201019085415.82207-1-jiawenwu@trustnetic.com>
Add device information get operation.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/features/txgbe.ini | 1 +
drivers/net/txgbe/base/txgbe_hw.c | 7 +-
drivers/net/txgbe/base/txgbe_type.h | 2 +
drivers/net/txgbe/meson.build | 1 +
drivers/net/txgbe/txgbe_ethdev.c | 79 ++++++++++++++++++++
drivers/net/txgbe/txgbe_ethdev.h | 31 ++++++++
drivers/net/txgbe/txgbe_rxtx.c | 112 ++++++++++++++++++++++++++++
drivers/net/txgbe/txgbe_rxtx.h | 15 ++++
8 files changed, 247 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/txgbe/txgbe_rxtx.c
create mode 100644 drivers/net/txgbe/txgbe_rxtx.h
diff --git a/doc/guides/nics/features/txgbe.ini b/doc/guides/nics/features/txgbe.ini
index 76c43c7f1..2fc202c3a 100644
--- a/doc/guides/nics/features/txgbe.ini
+++ b/doc/guides/nics/features/txgbe.ini
@@ -4,6 +4,7 @@
; Refer to default.ini for the full list of available PMD features.
;
[Features]
+Speed capabilities = Y
Linux UIO = Y
Linux VFIO = Y
ARMv8 = Y
diff --git a/drivers/net/txgbe/base/txgbe_hw.c b/drivers/net/txgbe/base/txgbe_hw.c
index 598ef3e99..31f8688d4 100644
--- a/drivers/net/txgbe/base/txgbe_hw.c
+++ b/drivers/net/txgbe/base/txgbe_hw.c
@@ -8,6 +8,8 @@
#include "txgbe_mng.h"
#include "txgbe_hw.h"
+#define TXGBE_RAPTOR_MAX_TX_QUEUES 128
+#define TXGBE_RAPTOR_MAX_RX_QUEUES 128
#define TXGBE_RAPTOR_RAR_ENTRIES 128
/**
@@ -304,7 +306,6 @@ s32 txgbe_init_ops_pf(struct txgbe_hw *hw)
/* MAC */
mac->init_hw = txgbe_init_hw;
mac->reset_hw = txgbe_reset_hw;
- mac->num_rar_entries = TXGBE_RAPTOR_RAR_ENTRIES;
/* EEPROM */
rom->init_params = txgbe_init_eeprom_params;
@@ -320,6 +321,10 @@ s32 txgbe_init_ops_pf(struct txgbe_hw *hw)
rom->update_checksum = txgbe_update_eeprom_checksum;
rom->calc_checksum = txgbe_calc_eeprom_checksum;
+ mac->num_rar_entries = TXGBE_RAPTOR_RAR_ENTRIES;
+ mac->max_rx_queues = TXGBE_RAPTOR_MAX_RX_QUEUES;
+ mac->max_tx_queues = TXGBE_RAPTOR_MAX_TX_QUEUES;
+
return 0;
}
diff --git a/drivers/net/txgbe/base/txgbe_type.h b/drivers/net/txgbe/base/txgbe_type.h
index 438734f8c..09089fce8 100644
--- a/drivers/net/txgbe/base/txgbe_type.h
+++ b/drivers/net/txgbe/base/txgbe_type.h
@@ -303,6 +303,8 @@ struct txgbe_mac_info {
u16 wwpn_prefix;
u32 num_rar_entries;
+ u32 max_tx_queues;
+ u32 max_rx_queues;
u8 san_mac_rar_index;
u64 orig_autoc; /* cached value of AUTOC */
diff --git a/drivers/net/txgbe/meson.build b/drivers/net/txgbe/meson.build
index 295f39296..3c11d5e33 100644
--- a/drivers/net/txgbe/meson.build
+++ b/drivers/net/txgbe/meson.build
@@ -6,6 +6,7 @@ objs = [base_objs]
sources = files(
'txgbe_ethdev.c',
+ 'txgbe_rxtx.c',
)
includes += include_directories('base')
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index 2967c450f..3ddbfd934 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -14,6 +14,7 @@
#include "txgbe_logs.h"
#include "base/txgbe.h"
#include "txgbe_ethdev.h"
+#include "txgbe_rxtx.h"
static int txgbe_dev_close(struct rte_eth_dev *dev);
@@ -26,6 +27,20 @@ static const struct rte_pci_id pci_id_txgbe_map[] = {
{ .vendor_id = 0, /* sentinel */ },
};
+static const struct rte_eth_desc_lim rx_desc_lim = {
+ .nb_max = TXGBE_RING_DESC_MAX,
+ .nb_min = TXGBE_RING_DESC_MIN,
+ .nb_align = TXGBE_RXD_ALIGN,
+};
+
+static const struct rte_eth_desc_lim tx_desc_lim = {
+ .nb_max = TXGBE_RING_DESC_MAX,
+ .nb_min = TXGBE_RING_DESC_MIN,
+ .nb_align = TXGBE_TXD_ALIGN,
+ .nb_seg_max = TXGBE_TX_MAX_SEG,
+ .nb_mtu_seg_max = TXGBE_TX_MAX_SEG,
+};
+
static const struct eth_dev_ops txgbe_eth_dev_ops;
static inline int
@@ -262,7 +277,71 @@ txgbe_dev_close(struct rte_eth_dev *dev)
return 0;
}
+static int
+txgbe_dev_info_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+
+ dev_info->max_rx_queues = (uint16_t)hw->mac.max_rx_queues;
+ dev_info->max_tx_queues = (uint16_t)hw->mac.max_tx_queues;
+ dev_info->min_rx_bufsize = 1024;
+ dev_info->max_rx_pktlen = 15872;
+ dev_info->max_mac_addrs = hw->mac.num_rar_entries;
+ dev_info->max_hash_mac_addrs = TXGBE_VMDQ_NUM_UC_MAC;
+ dev_info->max_vfs = pci_dev->max_vfs;
+ dev_info->max_vmdq_pools = ETH_64_POOLS;
+ dev_info->vmdq_queue_num = dev_info->max_rx_queues;
+ dev_info->rx_queue_offload_capa = txgbe_get_rx_queue_offloads(dev);
+ dev_info->rx_offload_capa = (txgbe_get_rx_port_offloads(dev) |
+ dev_info->rx_queue_offload_capa);
+ dev_info->tx_queue_offload_capa = txgbe_get_tx_queue_offloads(dev);
+ dev_info->tx_offload_capa = txgbe_get_tx_port_offloads(dev);
+
+ dev_info->default_rxconf = (struct rte_eth_rxconf) {
+ .rx_thresh = {
+ .pthresh = TXGBE_DEFAULT_RX_PTHRESH,
+ .hthresh = TXGBE_DEFAULT_RX_HTHRESH,
+ .wthresh = TXGBE_DEFAULT_RX_WTHRESH,
+ },
+ .rx_free_thresh = TXGBE_DEFAULT_RX_FREE_THRESH,
+ .rx_drop_en = 0,
+ .offloads = 0,
+ };
+
+ dev_info->default_txconf = (struct rte_eth_txconf) {
+ .tx_thresh = {
+ .pthresh = TXGBE_DEFAULT_TX_PTHRESH,
+ .hthresh = TXGBE_DEFAULT_TX_HTHRESH,
+ .wthresh = TXGBE_DEFAULT_TX_WTHRESH,
+ },
+ .tx_free_thresh = TXGBE_DEFAULT_TX_FREE_THRESH,
+ .offloads = 0,
+ };
+
+ dev_info->rx_desc_lim = rx_desc_lim;
+ dev_info->tx_desc_lim = tx_desc_lim;
+
+ dev_info->hash_key_size = TXGBE_HKEY_MAX_INDEX * sizeof(uint32_t);
+ dev_info->reta_size = ETH_RSS_RETA_SIZE_128;
+ dev_info->flow_type_rss_offloads = TXGBE_RSS_OFFLOAD_ALL;
+
+ dev_info->speed_capa = ETH_LINK_SPEED_1G | ETH_LINK_SPEED_10G;
+ dev_info->speed_capa |= ETH_LINK_SPEED_100M;
+
+ /* Driver-preferred Rx/Tx parameters */
+ dev_info->default_rxportconf.burst_size = 32;
+ dev_info->default_txportconf.burst_size = 32;
+ dev_info->default_rxportconf.nb_queues = 1;
+ dev_info->default_txportconf.nb_queues = 1;
+ dev_info->default_rxportconf.ring_size = 256;
+ dev_info->default_txportconf.ring_size = 256;
+
+ return 0;
+}
+
static const struct eth_dev_ops txgbe_eth_dev_ops = {
+ .dev_infos_get = txgbe_dev_info_get,
};
RTE_PMD_REGISTER_PCI(net_txgbe, rte_txgbe_pmd);
diff --git a/drivers/net/txgbe/txgbe_ethdev.h b/drivers/net/txgbe/txgbe_ethdev.h
index 5db03ba20..c81528295 100644
--- a/drivers/net/txgbe/txgbe_ethdev.h
+++ b/drivers/net/txgbe/txgbe_ethdev.h
@@ -7,6 +7,23 @@
#include "base/txgbe.h"
+/*
+ * Defines that were not part of txgbe_type.h as they are not used by the
+ * FreeBSD driver.
+ */
+#define TXGBE_HKEY_MAX_INDEX 10
+
+#define TXGBE_RSS_OFFLOAD_ALL ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_NONFRAG_IPV4_TCP | \
+ ETH_RSS_NONFRAG_IPV4_UDP | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_NONFRAG_IPV6_TCP | \
+ ETH_RSS_NONFRAG_IPV6_UDP | \
+ ETH_RSS_IPV6_EX | \
+ ETH_RSS_IPV6_TCP_EX | \
+ ETH_RSS_IPV6_UDP_EX)
+
/*
* Structure to store private data for each driver instance (for each port).
*/
@@ -18,4 +35,18 @@ struct txgbe_adapter {
(&((struct txgbe_adapter *)(dev)->data->dev_private)->hw)
#define TXGBE_VMDQ_NUM_UC_MAC 4096 /* Maximum nb. of UC MAC addr. */
+
+/*
+ * Default values for RX/TX configuration
+ */
+#define TXGBE_DEFAULT_RX_FREE_THRESH 32
+#define TXGBE_DEFAULT_RX_PTHRESH 8
+#define TXGBE_DEFAULT_RX_HTHRESH 8
+#define TXGBE_DEFAULT_RX_WTHRESH 0
+
+#define TXGBE_DEFAULT_TX_FREE_THRESH 32
+#define TXGBE_DEFAULT_TX_PTHRESH 32
+#define TXGBE_DEFAULT_TX_HTHRESH 0
+#define TXGBE_DEFAULT_TX_WTHRESH 0
+
#endif /* _TXGBE_ETHDEV_H_ */
diff --git a/drivers/net/txgbe/txgbe_rxtx.c b/drivers/net/txgbe/txgbe_rxtx.c
new file mode 100644
index 000000000..8a7282328
--- /dev/null
+++ b/drivers/net/txgbe/txgbe_rxtx.c
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2020
+ */
+
+#include <sys/queue.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+
+#include <rte_common.h>
+#include <rte_ethdev.h>
+
+#include "txgbe_logs.h"
+#include "base/txgbe.h"
+#include "txgbe_ethdev.h"
+#include "txgbe_rxtx.h"
+
+static int
+txgbe_is_vf(struct rte_eth_dev *dev)
+{
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+
+ switch (hw->mac.type) {
+ case txgbe_mac_raptor_vf:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+uint64_t
+txgbe_get_rx_queue_offloads(struct rte_eth_dev *dev __rte_unused)
+{
+ return DEV_RX_OFFLOAD_VLAN_STRIP;
+}
+
+uint64_t
+txgbe_get_rx_port_offloads(struct rte_eth_dev *dev)
+{
+ uint64_t offloads;
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+ struct rte_eth_dev_sriov *sriov = &RTE_ETH_DEV_SRIOV(dev);
+
+ offloads = DEV_RX_OFFLOAD_IPV4_CKSUM |
+ DEV_RX_OFFLOAD_UDP_CKSUM |
+ DEV_RX_OFFLOAD_TCP_CKSUM |
+ DEV_RX_OFFLOAD_KEEP_CRC |
+ DEV_RX_OFFLOAD_JUMBO_FRAME |
+ DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_RSS_HASH |
+ DEV_RX_OFFLOAD_SCATTER;
+
+ if (!txgbe_is_vf(dev))
+ offloads |= (DEV_RX_OFFLOAD_VLAN_FILTER |
+ DEV_RX_OFFLOAD_QINQ_STRIP |
+ DEV_RX_OFFLOAD_VLAN_EXTEND);
+
+ /*
+ * RSC is only supported by PF devices in a non-SR-IOV
+ * mode.
+ */
+ if (hw->mac.type == txgbe_mac_raptor && !sriov->active)
+ offloads |= DEV_RX_OFFLOAD_TCP_LRO;
+
+ if (hw->mac.type == txgbe_mac_raptor)
+ offloads |= DEV_RX_OFFLOAD_MACSEC_STRIP;
+
+ offloads |= DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM;
+
+ return offloads;
+}
+
+uint64_t
+txgbe_get_tx_queue_offloads(struct rte_eth_dev *dev)
+{
+ RTE_SET_USED(dev);
+
+ return 0;
+}
+
+uint64_t
+txgbe_get_tx_port_offloads(struct rte_eth_dev *dev)
+{
+ uint64_t tx_offload_capa;
+
+ tx_offload_capa =
+ DEV_TX_OFFLOAD_VLAN_INSERT |
+ DEV_TX_OFFLOAD_IPV4_CKSUM |
+ DEV_TX_OFFLOAD_UDP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_CKSUM |
+ DEV_TX_OFFLOAD_SCTP_CKSUM |
+ DEV_TX_OFFLOAD_TCP_TSO |
+ DEV_TX_OFFLOAD_UDP_TSO |
+ DEV_TX_OFFLOAD_UDP_TNL_TSO |
+ DEV_TX_OFFLOAD_IP_TNL_TSO |
+ DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+ DEV_TX_OFFLOAD_GRE_TNL_TSO |
+ DEV_TX_OFFLOAD_IPIP_TNL_TSO |
+ DEV_TX_OFFLOAD_GENEVE_TNL_TSO |
+ DEV_TX_OFFLOAD_MULTI_SEGS;
+
+ if (!txgbe_is_vf(dev))
+ tx_offload_capa |= DEV_TX_OFFLOAD_QINQ_INSERT;
+
+ tx_offload_capa |= DEV_TX_OFFLOAD_MACSEC_INSERT;
+
+ tx_offload_capa |= DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM;
+
+ return tx_offload_capa;
+}
+
diff --git a/drivers/net/txgbe/txgbe_rxtx.h b/drivers/net/txgbe/txgbe_rxtx.h
new file mode 100644
index 000000000..9488c2b75
--- /dev/null
+++ b/drivers/net/txgbe/txgbe_rxtx.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2020
+ */
+
+#ifndef _TXGBE_RXTX_H_
+#define _TXGBE_RXTX_H_
+
+#define TXGBE_TX_MAX_SEG 40
+
+uint64_t txgbe_get_tx_port_offloads(struct rte_eth_dev *dev);
+uint64_t txgbe_get_rx_queue_offloads(struct rte_eth_dev *dev);
+uint64_t txgbe_get_rx_port_offloads(struct rte_eth_dev *dev);
+uint64_t txgbe_get_tx_queue_offloads(struct rte_eth_dev *dev);
+
+#endif /* _TXGBE_RXTX_H_ */
--
2.18.4
next prev parent reply other threads:[~2020-10-19 8:55 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-19 8:53 [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 01/58] net/txgbe: add build and doc infrastructure Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 02/58] net/txgbe: add ethdev probe and remove Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 03/58] net/txgbe: add device init and uninit Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 04/58] net/txgbe: add error types and registers Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 05/58] net/txgbe: add MAC type and bus lan id Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 06/58] net/txgbe: add HW infrastructure and dummy function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 07/58] net/txgbe: add EEPROM functions Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 08/58] net/txgbe: add HW init and reset operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 09/58] net/txgbe: add PHY init Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 10/58] net/txgbe: add module identify Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 11/58] net/txgbe: add PHY reset Jiawen Wu
2020-10-19 8:53 ` Jiawen Wu [this message]
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 13/58] net/txgbe: add interrupt operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 14/58] net/txgbe: add device configure operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 15/58] net/txgbe: add link status change Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 16/58] net/txgbe: add multi-speed link setup Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 17/58] net/txgbe: add autoc read and write Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 18/58] net/txgbe: add MAC address operations Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 19/58] net/txgbe: add unicast hash bitmap Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 20/58] net/txgbe: add Rx and Tx init Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 21/58] net/txgbe: add Rx and Tx queues setup and release Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 22/58] net/txgbe: add Rx and Tx start and stop Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 23/58] net/txgbe: add packet type Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 24/58] net/txgbe: fill simple transmit function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 25/58] net/txgbe: fill transmit function with hardware offload Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 26/58] net/txgbe: fill Tx prepare function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 27/58] net/txgbe: fill receive functions Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 28/58] net/txgbe: add device start operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 29/58] net/txgbe: add Rx and Tx data path start and stop Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 30/58] net/txgbe: add device stop and close operations Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 31/58] net/txgbe: support Rx interrupt Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 32/58] net/txgbe: add Rx and Tx queue info get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 33/58] net/txgbe: add device stats get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 34/58] net/txgbe: add device xstats get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 35/58] net/txgbe: add queue stats mapping Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 36/58] net/txgbe: add VLAN handle support Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 37/58] net/txgbe: add SWFW semaphore and lock Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 38/58] net/txgbe: add PF module init and uninit for SRIOV Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 39/58] net/txgbe: add process mailbox operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 40/58] net/txgbe: add PF module configure for SRIOV Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 41/58] net/txgbe: add VMDq configure Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 42/58] net/txgbe: add RSS support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 43/58] net/txgbe: add DCB support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 44/58] net/txgbe: add flow control support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 45/58] net/txgbe: add FC auto negotiation support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 46/58] net/txgbe: add priority flow control support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 47/58] net/txgbe: add device promiscuous and allmulticast mode Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 48/58] net/txgbe: add MTU set operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 49/58] net/txgbe: add FW version get operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 50/58] net/txgbe: add EEPROM info " Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 51/58] net/txgbe: add register dump support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 52/58] net/txgbe: support device LED on and off Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 53/58] net/txgbe: add mirror rule operations Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 54/58] net/txgbe: add PTP support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 55/58] net/txgbe: add DCB info get operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 56/58] net/txgbe: add Rx and Tx descriptor status Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 57/58] net/txgbe: change stop operation callback to return int Jiawen Wu
2020-10-26 14:55 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 58/58] net/txgbe: introduce log type in the driver documentation Jiawen Wu
2020-10-26 14:55 ` Ferruh Yigit
2020-10-22 11:23 ` [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-22 11:44 ` Ferruh Yigit
2020-10-26 14:55 ` Ferruh Yigit
2020-10-27 2:39 ` Jiawen Wu
2020-10-27 11:37 ` Ferruh Yigit
2020-11-03 23:08 ` Thomas Monjalon
2020-11-04 17:24 ` Ferruh Yigit
2020-11-05 1:55 ` Jiawen Wu
2020-11-05 8:55 ` Jiawen Wu
2020-11-05 9:28 ` Thomas Monjalon
2020-11-06 6:28 ` Honnappa Nagarahalli
2020-11-06 9:22 ` Jiawen Wu
2020-11-06 17:36 ` Honnappa Nagarahalli
2020-11-06 18:21 ` Honnappa Nagarahalli
2020-11-06 19:00 ` Thomas Monjalon
2020-11-06 19:56 ` Honnappa Nagarahalli
2020-11-07 9:55 ` Thomas Monjalon
2020-10-27 8:48 ` David Marchand
2020-10-27 11:36 ` Ferruh Yigit
2020-10-27 11:39 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201019085415.82207-13-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).