From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v4 21/58] net/txgbe: add Rx and Tx queues setup and release
Date: Mon, 19 Oct 2020 16:53:38 +0800 [thread overview]
Message-ID: <20201019085415.82207-22-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20201019085415.82207-1-jiawenwu@trustnetic.com>
Add receive and transmit queues setup and release.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/txgbe_ethdev.c | 4 +
drivers/net/txgbe/txgbe_ethdev.h | 13 +
drivers/net/txgbe/txgbe_rxtx.c | 510 +++++++++++++++++++++++++++++++
drivers/net/txgbe/txgbe_rxtx.h | 130 ++++++++
4 files changed, 657 insertions(+)
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index 1395f6ffe..6186cace1 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -1322,6 +1322,10 @@ static const struct eth_dev_ops txgbe_eth_dev_ops = {
.dev_infos_get = txgbe_dev_info_get,
.dev_set_link_up = txgbe_dev_set_link_up,
.dev_set_link_down = txgbe_dev_set_link_down,
+ .rx_queue_setup = txgbe_dev_rx_queue_setup,
+ .rx_queue_release = txgbe_dev_rx_queue_release,
+ .tx_queue_setup = txgbe_dev_tx_queue_setup,
+ .tx_queue_release = txgbe_dev_tx_queue_release,
.mac_addr_add = txgbe_add_rar,
.mac_addr_remove = txgbe_remove_rar,
.mac_addr_set = txgbe_set_default_mac_addr,
diff --git a/drivers/net/txgbe/txgbe_ethdev.h b/drivers/net/txgbe/txgbe_ethdev.h
index 096b17673..6636b6e9a 100644
--- a/drivers/net/txgbe/txgbe_ethdev.h
+++ b/drivers/net/txgbe/txgbe_ethdev.h
@@ -80,6 +80,19 @@ struct txgbe_adapter {
/*
* RX/TX function prototypes
*/
+void txgbe_dev_rx_queue_release(void *rxq);
+
+void txgbe_dev_tx_queue_release(void *txq);
+
+int txgbe_dev_rx_queue_setup(struct rte_eth_dev *dev, uint16_t rx_queue_id,
+ uint16_t nb_rx_desc, unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mb_pool);
+
+int txgbe_dev_tx_queue_setup(struct rte_eth_dev *dev, uint16_t tx_queue_id,
+ uint16_t nb_tx_desc, unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf);
+
int txgbe_dev_rx_init(struct rte_eth_dev *dev);
void txgbe_dev_tx_init(struct rte_eth_dev *dev);
diff --git a/drivers/net/txgbe/txgbe_rxtx.c b/drivers/net/txgbe/txgbe_rxtx.c
index eadc06bcf..707d5b2e4 100644
--- a/drivers/net/txgbe/txgbe_rxtx.c
+++ b/drivers/net/txgbe/txgbe_rxtx.c
@@ -7,10 +7,14 @@
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
+#include <errno.h>
#include <rte_common.h>
#include <rte_ethdev.h>
#include <rte_ethdev_driver.h>
+#include <rte_memzone.h>
+#include <rte_mempool.h>
+#include <rte_malloc.h>
#include <rte_mbuf.h>
#include "txgbe_logs.h"
@@ -31,6 +35,10 @@ txgbe_is_vf(struct rte_eth_dev *dev)
}
}
+#ifndef DEFAULT_TX_FREE_THRESH
+#define DEFAULT_TX_FREE_THRESH 32
+#endif
+
uint64_t
txgbe_get_rx_queue_offloads(struct rte_eth_dev *dev __rte_unused)
{
@@ -73,6 +81,57 @@ txgbe_get_rx_port_offloads(struct rte_eth_dev *dev)
return offloads;
}
+static void __rte_cold
+txgbe_tx_queue_release_mbufs(struct txgbe_tx_queue *txq)
+{
+ unsigned int i;
+
+ if (txq->sw_ring != NULL) {
+ for (i = 0; i < txq->nb_tx_desc; i++) {
+ if (txq->sw_ring[i].mbuf != NULL) {
+ rte_pktmbuf_free_seg(txq->sw_ring[i].mbuf);
+ txq->sw_ring[i].mbuf = NULL;
+ }
+ }
+ }
+}
+
+static void __rte_cold
+txgbe_tx_free_swring(struct txgbe_tx_queue *txq)
+{
+ if (txq != NULL &&
+ txq->sw_ring != NULL)
+ rte_free(txq->sw_ring);
+}
+
+static void __rte_cold
+txgbe_tx_queue_release(struct txgbe_tx_queue *txq)
+{
+ if (txq != NULL && txq->ops != NULL) {
+ txq->ops->release_mbufs(txq);
+ txq->ops->free_swring(txq);
+ rte_free(txq);
+ }
+}
+
+void __rte_cold
+txgbe_dev_tx_queue_release(void *txq)
+{
+ txgbe_tx_queue_release(txq);
+}
+
+static const struct txgbe_txq_ops def_txq_ops = {
+ .release_mbufs = txgbe_tx_queue_release_mbufs,
+ .free_swring = txgbe_tx_free_swring,
+};
+
+void __rte_cold
+txgbe_set_tx_function(struct rte_eth_dev *dev, struct txgbe_tx_queue *txq)
+{
+ RTE_SET_USED(dev);
+ RTE_SET_USED(txq);
+}
+
uint64_t
txgbe_get_tx_queue_offloads(struct rte_eth_dev *dev)
{
@@ -112,6 +171,457 @@ txgbe_get_tx_port_offloads(struct rte_eth_dev *dev)
return tx_offload_capa;
}
+int __rte_cold
+txgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t queue_idx,
+ uint16_t nb_desc,
+ unsigned int socket_id,
+ const struct rte_eth_txconf *tx_conf)
+{
+ const struct rte_memzone *tz;
+ struct txgbe_tx_queue *txq;
+ struct txgbe_hw *hw;
+ uint16_t tx_free_thresh;
+ uint64_t offloads;
+
+ PMD_INIT_FUNC_TRACE();
+ hw = TXGBE_DEV_HW(dev);
+
+ offloads = tx_conf->offloads | dev->data->dev_conf.txmode.offloads;
+
+ /*
+ * Validate number of transmit descriptors.
+ * It must not exceed hardware maximum, and must be multiple
+ * of TXGBE_ALIGN.
+ */
+ if (nb_desc % TXGBE_TXD_ALIGN != 0 ||
+ nb_desc > TXGBE_RING_DESC_MAX ||
+ nb_desc < TXGBE_RING_DESC_MIN) {
+ return -EINVAL;
+ }
+
+ /*
+ * The TX descriptor ring will be cleaned after txq->tx_free_thresh
+ * descriptors are used or if the number of descriptors required
+ * to transmit a packet is greater than the number of free TX
+ * descriptors.
+ * One descriptor in the TX ring is used as a sentinel to avoid a
+ * H/W race condition, hence the maximum threshold constraints.
+ * When set to zero use default values.
+ */
+ tx_free_thresh = (uint16_t)((tx_conf->tx_free_thresh) ?
+ tx_conf->tx_free_thresh : DEFAULT_TX_FREE_THRESH);
+ if (tx_free_thresh >= (nb_desc - 3)) {
+ PMD_INIT_LOG(ERR, "tx_free_thresh must be less than the number of "
+ "TX descriptors minus 3. (tx_free_thresh=%u "
+ "port=%d queue=%d)",
+ (unsigned int)tx_free_thresh,
+ (int)dev->data->port_id, (int)queue_idx);
+ return -(EINVAL);
+ }
+
+ if ((nb_desc % tx_free_thresh) != 0) {
+ PMD_INIT_LOG(ERR, "tx_free_thresh must be a divisor of the "
+ "number of TX descriptors. (tx_free_thresh=%u "
+ "port=%d queue=%d)", (unsigned int)tx_free_thresh,
+ (int)dev->data->port_id, (int)queue_idx);
+ return -(EINVAL);
+ }
+
+ /* Free memory prior to re-allocation if needed... */
+ if (dev->data->tx_queues[queue_idx] != NULL) {
+ txgbe_tx_queue_release(dev->data->tx_queues[queue_idx]);
+ dev->data->tx_queues[queue_idx] = NULL;
+ }
+
+ /* First allocate the tx queue data structure */
+ txq = rte_zmalloc_socket("ethdev TX queue",
+ sizeof(struct txgbe_tx_queue),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (txq == NULL)
+ return -ENOMEM;
+
+ /*
+ * Allocate TX ring hardware descriptors. A memzone large enough to
+ * handle the maximum ring size is allocated in order to allow for
+ * resizing in later calls to the queue setup function.
+ */
+ tz = rte_eth_dma_zone_reserve(dev, "tx_ring", queue_idx,
+ sizeof(struct txgbe_tx_desc) * TXGBE_RING_DESC_MAX,
+ TXGBE_ALIGN, socket_id);
+ if (tz == NULL) {
+ txgbe_tx_queue_release(txq);
+ return -ENOMEM;
+ }
+
+ txq->nb_tx_desc = nb_desc;
+ txq->tx_free_thresh = tx_free_thresh;
+ txq->pthresh = tx_conf->tx_thresh.pthresh;
+ txq->hthresh = tx_conf->tx_thresh.hthresh;
+ txq->wthresh = tx_conf->tx_thresh.wthresh;
+ txq->queue_id = queue_idx;
+ txq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
+ queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
+ txq->port_id = dev->data->port_id;
+ txq->offloads = offloads;
+ txq->ops = &def_txq_ops;
+ txq->tx_deferred_start = tx_conf->tx_deferred_start;
+
+ /* Modification to set tail pointer for virtual function
+ * if vf is detected.
+ */
+ if (hw->mac.type == txgbe_mac_raptor_vf) {
+ txq->tdt_reg_addr = TXGBE_REG_ADDR(hw, TXGBE_TXWP(queue_idx));
+ txq->tdc_reg_addr = TXGBE_REG_ADDR(hw, TXGBE_TXCFG(queue_idx));
+ } else {
+ txq->tdt_reg_addr = TXGBE_REG_ADDR(hw,
+ TXGBE_TXWP(txq->reg_idx));
+ txq->tdc_reg_addr = TXGBE_REG_ADDR(hw,
+ TXGBE_TXCFG(txq->reg_idx));
+ }
+
+ txq->tx_ring_phys_addr = TMZ_PADDR(tz);
+ txq->tx_ring = (struct txgbe_tx_desc *)TMZ_VADDR(tz);
+
+ /* Allocate software ring */
+ txq->sw_ring = rte_zmalloc_socket("txq->sw_ring",
+ sizeof(struct txgbe_tx_entry) * nb_desc,
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (txq->sw_ring == NULL) {
+ txgbe_tx_queue_release(txq);
+ return -ENOMEM;
+ }
+ PMD_INIT_LOG(DEBUG, "sw_ring=%p hw_ring=%p dma_addr=0x%" PRIx64,
+ txq->sw_ring, txq->tx_ring, txq->tx_ring_phys_addr);
+
+ /* set up scalar TX function as appropriate */
+ txgbe_set_tx_function(dev, txq);
+
+ txq->ops->reset(txq);
+
+ dev->data->tx_queues[queue_idx] = txq;
+
+ return 0;
+}
+
+/**
+ * txgbe_free_sc_cluster - free the not-yet-completed scattered cluster
+ *
+ * The "next" pointer of the last segment of (not-yet-completed) RSC clusters
+ * in the sw_rsc_ring is not set to NULL but rather points to the next
+ * mbuf of this RSC aggregation (that has not been completed yet and still
+ * resides on the HW ring). So, instead of calling for rte_pktmbuf_free() we
+ * will just free first "nb_segs" segments of the cluster explicitly by calling
+ * an rte_pktmbuf_free_seg().
+ *
+ * @m scattered cluster head
+ */
+static void __rte_cold
+txgbe_free_sc_cluster(struct rte_mbuf *m)
+{
+ uint16_t i, nb_segs = m->nb_segs;
+ struct rte_mbuf *next_seg;
+
+ for (i = 0; i < nb_segs; i++) {
+ next_seg = m->next;
+ rte_pktmbuf_free_seg(m);
+ m = next_seg;
+ }
+}
+
+static void __rte_cold
+txgbe_rx_queue_release_mbufs(struct txgbe_rx_queue *rxq)
+{
+ unsigned int i;
+
+ if (rxq->sw_ring != NULL) {
+ for (i = 0; i < rxq->nb_rx_desc; i++) {
+ if (rxq->sw_ring[i].mbuf != NULL) {
+ rte_pktmbuf_free_seg(rxq->sw_ring[i].mbuf);
+ rxq->sw_ring[i].mbuf = NULL;
+ }
+ }
+ if (rxq->rx_nb_avail) {
+ for (i = 0; i < rxq->rx_nb_avail; ++i) {
+ struct rte_mbuf *mb;
+
+ mb = rxq->rx_stage[rxq->rx_next_avail + i];
+ rte_pktmbuf_free_seg(mb);
+ }
+ rxq->rx_nb_avail = 0;
+ }
+ }
+
+ if (rxq->sw_sc_ring)
+ for (i = 0; i < rxq->nb_rx_desc; i++)
+ if (rxq->sw_sc_ring[i].fbuf) {
+ txgbe_free_sc_cluster(rxq->sw_sc_ring[i].fbuf);
+ rxq->sw_sc_ring[i].fbuf = NULL;
+ }
+}
+
+static void __rte_cold
+txgbe_rx_queue_release(struct txgbe_rx_queue *rxq)
+{
+ if (rxq != NULL) {
+ txgbe_rx_queue_release_mbufs(rxq);
+ rte_free(rxq->sw_ring);
+ rte_free(rxq->sw_sc_ring);
+ rte_free(rxq);
+ }
+}
+
+void __rte_cold
+txgbe_dev_rx_queue_release(void *rxq)
+{
+ txgbe_rx_queue_release(rxq);
+}
+
+/*
+ * Check if Rx Burst Bulk Alloc function can be used.
+ * Return
+ * 0: the preconditions are satisfied and the bulk allocation function
+ * can be used.
+ * -EINVAL: the preconditions are NOT satisfied and the default Rx burst
+ * function must be used.
+ */
+static inline int __rte_cold
+check_rx_burst_bulk_alloc_preconditions(struct txgbe_rx_queue *rxq)
+{
+ int ret = 0;
+
+ /*
+ * Make sure the following pre-conditions are satisfied:
+ * rxq->rx_free_thresh >= RTE_PMD_TXGBE_RX_MAX_BURST
+ * rxq->rx_free_thresh < rxq->nb_rx_desc
+ * (rxq->nb_rx_desc % rxq->rx_free_thresh) == 0
+ * Scattered packets are not supported. This should be checked
+ * outside of this function.
+ */
+ if (!(rxq->rx_free_thresh >= RTE_PMD_TXGBE_RX_MAX_BURST)) {
+ PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions: "
+ "rxq->rx_free_thresh=%d, "
+ "RTE_PMD_TXGBE_RX_MAX_BURST=%d",
+ rxq->rx_free_thresh, RTE_PMD_TXGBE_RX_MAX_BURST);
+ ret = -EINVAL;
+ } else if (!(rxq->rx_free_thresh < rxq->nb_rx_desc)) {
+ PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions: "
+ "rxq->rx_free_thresh=%d, "
+ "rxq->nb_rx_desc=%d",
+ rxq->rx_free_thresh, rxq->nb_rx_desc);
+ ret = -EINVAL;
+ } else if (!((rxq->nb_rx_desc % rxq->rx_free_thresh) == 0)) {
+ PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions: "
+ "rxq->nb_rx_desc=%d, "
+ "rxq->rx_free_thresh=%d",
+ rxq->nb_rx_desc, rxq->rx_free_thresh);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/* Reset dynamic txgbe_rx_queue fields back to defaults */
+static void __rte_cold
+txgbe_reset_rx_queue(struct txgbe_adapter *adapter, struct txgbe_rx_queue *rxq)
+{
+ static const struct txgbe_rx_desc zeroed_desc = {
+ {{0}, {0} }, {{0}, {0} } };
+ unsigned int i;
+ uint16_t len = rxq->nb_rx_desc;
+
+ /*
+ * By default, the Rx queue setup function allocates enough memory for
+ * TXGBE_RING_DESC_MAX. The Rx Burst bulk allocation function requires
+ * extra memory at the end of the descriptor ring to be zero'd out.
+ */
+ if (adapter->rx_bulk_alloc_allowed)
+ /* zero out extra memory */
+ len += RTE_PMD_TXGBE_RX_MAX_BURST;
+
+ /*
+ * Zero out HW ring memory. Zero out extra memory at the end of
+ * the H/W ring so look-ahead logic in Rx Burst bulk alloc function
+ * reads extra memory as zeros.
+ */
+ for (i = 0; i < len; i++)
+ rxq->rx_ring[i] = zeroed_desc;
+
+ /*
+ * initialize extra software ring entries. Space for these extra
+ * entries is always allocated
+ */
+ memset(&rxq->fake_mbuf, 0x0, sizeof(rxq->fake_mbuf));
+ for (i = rxq->nb_rx_desc; i < len; ++i)
+ rxq->sw_ring[i].mbuf = &rxq->fake_mbuf;
+
+ rxq->rx_nb_avail = 0;
+ rxq->rx_next_avail = 0;
+ rxq->rx_free_trigger = (uint16_t)(rxq->rx_free_thresh - 1);
+ rxq->rx_tail = 0;
+ rxq->nb_rx_hold = 0;
+ rxq->pkt_first_seg = NULL;
+ rxq->pkt_last_seg = NULL;
+}
+
+int __rte_cold
+txgbe_dev_rx_queue_setup(struct rte_eth_dev *dev,
+ uint16_t queue_idx,
+ uint16_t nb_desc,
+ unsigned int socket_id,
+ const struct rte_eth_rxconf *rx_conf,
+ struct rte_mempool *mp)
+{
+ const struct rte_memzone *rz;
+ struct txgbe_rx_queue *rxq;
+ struct txgbe_hw *hw;
+ uint16_t len;
+ struct txgbe_adapter *adapter = TXGBE_DEV_ADAPTER(dev);
+ uint64_t offloads;
+
+ PMD_INIT_FUNC_TRACE();
+ hw = TXGBE_DEV_HW(dev);
+
+ offloads = rx_conf->offloads | dev->data->dev_conf.rxmode.offloads;
+
+ /*
+ * Validate number of receive descriptors.
+ * It must not exceed hardware maximum, and must be multiple
+ * of TXGBE_ALIGN.
+ */
+ if (nb_desc % TXGBE_RXD_ALIGN != 0 ||
+ nb_desc > TXGBE_RING_DESC_MAX ||
+ nb_desc < TXGBE_RING_DESC_MIN) {
+ return -EINVAL;
+ }
+
+ /* Free memory prior to re-allocation if needed... */
+ if (dev->data->rx_queues[queue_idx] != NULL) {
+ txgbe_rx_queue_release(dev->data->rx_queues[queue_idx]);
+ dev->data->rx_queues[queue_idx] = NULL;
+ }
+
+ /* First allocate the rx queue data structure */
+ rxq = rte_zmalloc_socket("ethdev RX queue",
+ sizeof(struct txgbe_rx_queue),
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (rxq == NULL)
+ return -ENOMEM;
+ rxq->mb_pool = mp;
+ rxq->nb_rx_desc = nb_desc;
+ rxq->rx_free_thresh = rx_conf->rx_free_thresh;
+ rxq->queue_id = queue_idx;
+ rxq->reg_idx = (uint16_t)((RTE_ETH_DEV_SRIOV(dev).active == 0) ?
+ queue_idx : RTE_ETH_DEV_SRIOV(dev).def_pool_q_idx + queue_idx);
+ rxq->port_id = dev->data->port_id;
+ if (dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_KEEP_CRC)
+ rxq->crc_len = RTE_ETHER_CRC_LEN;
+ else
+ rxq->crc_len = 0;
+ rxq->drop_en = rx_conf->rx_drop_en;
+ rxq->rx_deferred_start = rx_conf->rx_deferred_start;
+ rxq->offloads = offloads;
+
+ /*
+ * The packet type in RX descriptor is different for different NICs.
+ * So set different masks for different NICs.
+ */
+ rxq->pkt_type_mask = TXGBE_PTID_MASK;
+
+ /*
+ * Allocate RX ring hardware descriptors. A memzone large enough to
+ * handle the maximum ring size is allocated in order to allow for
+ * resizing in later calls to the queue setup function.
+ */
+ rz = rte_eth_dma_zone_reserve(dev, "rx_ring", queue_idx,
+ RX_RING_SZ, TXGBE_ALIGN, socket_id);
+ if (rz == NULL) {
+ txgbe_rx_queue_release(rxq);
+ return -ENOMEM;
+ }
+
+ /*
+ * Zero init all the descriptors in the ring.
+ */
+ memset(rz->addr, 0, RX_RING_SZ);
+
+ /*
+ * Modified to setup VFRDT for Virtual Function
+ */
+ if (hw->mac.type == txgbe_mac_raptor_vf) {
+ rxq->rdt_reg_addr =
+ TXGBE_REG_ADDR(hw, TXGBE_RXWP(queue_idx));
+ rxq->rdh_reg_addr =
+ TXGBE_REG_ADDR(hw, TXGBE_RXRP(queue_idx));
+ } else {
+ rxq->rdt_reg_addr =
+ TXGBE_REG_ADDR(hw, TXGBE_RXWP(rxq->reg_idx));
+ rxq->rdh_reg_addr =
+ TXGBE_REG_ADDR(hw, TXGBE_RXRP(rxq->reg_idx));
+ }
+
+ rxq->rx_ring_phys_addr = TMZ_PADDR(rz);
+ rxq->rx_ring = (struct txgbe_rx_desc *)TMZ_VADDR(rz);
+
+ /*
+ * Certain constraints must be met in order to use the bulk buffer
+ * allocation Rx burst function. If any of Rx queues doesn't meet them
+ * the feature should be disabled for the whole port.
+ */
+ if (check_rx_burst_bulk_alloc_preconditions(rxq)) {
+ PMD_INIT_LOG(DEBUG, "queue[%d] doesn't meet Rx Bulk Alloc "
+ "preconditions - canceling the feature for "
+ "the whole port[%d]",
+ rxq->queue_id, rxq->port_id);
+ adapter->rx_bulk_alloc_allowed = false;
+ }
+
+ /*
+ * Allocate software ring. Allow for space at the end of the
+ * S/W ring to make sure look-ahead logic in bulk alloc Rx burst
+ * function does not access an invalid memory region.
+ */
+ len = nb_desc;
+ if (adapter->rx_bulk_alloc_allowed)
+ len += RTE_PMD_TXGBE_RX_MAX_BURST;
+
+ rxq->sw_ring = rte_zmalloc_socket("rxq->sw_ring",
+ sizeof(struct txgbe_rx_entry) * len,
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (!rxq->sw_ring) {
+ txgbe_rx_queue_release(rxq);
+ return -ENOMEM;
+ }
+
+ /*
+ * Always allocate even if it's not going to be needed in order to
+ * simplify the code.
+ *
+ * This ring is used in LRO and Scattered Rx cases and Scattered Rx may
+ * be requested in txgbe_dev_rx_init(), which is called later from
+ * dev_start() flow.
+ */
+ rxq->sw_sc_ring =
+ rte_zmalloc_socket("rxq->sw_sc_ring",
+ sizeof(struct txgbe_scattered_rx_entry) * len,
+ RTE_CACHE_LINE_SIZE, socket_id);
+ if (!rxq->sw_sc_ring) {
+ txgbe_rx_queue_release(rxq);
+ return -ENOMEM;
+ }
+
+ PMD_INIT_LOG(DEBUG, "sw_ring=%p sw_sc_ring=%p hw_ring=%p "
+ "dma_addr=0x%" PRIx64,
+ rxq->sw_ring, rxq->sw_sc_ring, rxq->rx_ring,
+ rxq->rx_ring_phys_addr);
+
+ dev->data->rx_queues[queue_idx] = rxq;
+
+ txgbe_reset_rx_queue(adapter, rxq);
+
+ return 0;
+}
+
void __rte_cold
txgbe_set_rx_function(struct rte_eth_dev *dev)
{
diff --git a/drivers/net/txgbe/txgbe_rxtx.h b/drivers/net/txgbe/txgbe_rxtx.h
index 7d3d9c275..be165dd19 100644
--- a/drivers/net/txgbe/txgbe_rxtx.h
+++ b/drivers/net/txgbe/txgbe_rxtx.h
@@ -5,38 +5,168 @@
#ifndef _TXGBE_RXTX_H_
#define _TXGBE_RXTX_H_
+/*****************************************************************************
+ * Receive Descriptor
+ *****************************************************************************/
+struct txgbe_rx_desc {
+ struct {
+ union {
+ __le32 dw0;
+ struct {
+ __le16 pkt;
+ __le16 hdr;
+ } lo;
+ };
+ union {
+ __le32 dw1;
+ struct {
+ __le16 ipid;
+ __le16 csum;
+ } hi;
+ };
+ } qw0; /* also as r.pkt_addr */
+ struct {
+ union {
+ __le32 dw2;
+ struct {
+ __le32 status;
+ } lo;
+ };
+ union {
+ __le32 dw3;
+ struct {
+ __le16 len;
+ __le16 tag;
+ } hi;
+ };
+ } qw1; /* also as r.hdr_addr */
+};
+
+/**
+ * Transmit Data Descriptor (TXGBE_TXD_TYP=DATA)
+ **/
+struct txgbe_tx_desc {
+ __le64 qw0; /* r.buffer_addr , w.reserved */
+ __le32 dw2; /* r.cmd_type_len, w.nxtseq_seed */
+ __le32 dw3; /* r.olinfo_status, w.status */
+};
+
#define RTE_PMD_TXGBE_TX_MAX_BURST 32
#define RTE_PMD_TXGBE_RX_MAX_BURST 32
+#define RX_RING_SZ ((TXGBE_RING_DESC_MAX + RTE_PMD_TXGBE_RX_MAX_BURST) * \
+ sizeof(struct txgbe_rx_desc))
+
+#define TXGBE_PTID_MASK 0xFF
+
#define TXGBE_TX_MAX_SEG 40
+/**
+ * Structure associated with each descriptor of the RX ring of a RX queue.
+ */
+struct txgbe_rx_entry {
+ struct rte_mbuf *mbuf; /**< mbuf associated with RX descriptor. */
+};
+
+struct txgbe_scattered_rx_entry {
+ struct rte_mbuf *fbuf; /**< First segment of the fragmented packet. */
+};
+
+/**
+ * Structure associated with each descriptor of the TX ring of a TX queue.
+ */
+struct txgbe_tx_entry {
+ struct rte_mbuf *mbuf; /**< mbuf associated with TX desc, if any. */
+ uint16_t next_id; /**< Index of next descriptor in ring. */
+ uint16_t last_id; /**< Index of last scattered descriptor. */
+};
+
+/**
+ * Structure associated with each descriptor of the TX ring of a TX queue.
+ */
+struct txgbe_tx_entry_v {
+ struct rte_mbuf *mbuf; /**< mbuf associated with TX desc, if any. */
+};
+
/**
* Structure associated with each RX queue.
*/
struct txgbe_rx_queue {
struct rte_mempool *mb_pool; /**< mbuf pool to populate RX ring. */
+ volatile struct txgbe_rx_desc *rx_ring; /**< RX ring virtual address. */
uint64_t rx_ring_phys_addr; /**< RX ring DMA address. */
+ volatile uint32_t *rdt_reg_addr; /**< RDT register address. */
+ volatile uint32_t *rdh_reg_addr; /**< RDH register address. */
+ struct txgbe_rx_entry *sw_ring; /**< address of RX software ring. */
+ /**< address of scattered Rx software ring. */
+ struct txgbe_scattered_rx_entry *sw_sc_ring;
+ struct rte_mbuf *pkt_first_seg; /**< First segment of current packet. */
+ struct rte_mbuf *pkt_last_seg; /**< Last segment of current packet. */
uint16_t nb_rx_desc; /**< number of RX descriptors. */
+ uint16_t rx_tail; /**< current value of RDT register. */
+ uint16_t nb_rx_hold; /**< number of held free RX desc. */
+ uint16_t rx_nb_avail; /**< nr of staged pkts ready to ret to app */
+ uint16_t rx_next_avail; /**< idx of next staged pkt to ret to app */
+ uint16_t rx_free_trigger; /**< triggers rx buffer allocation */
+ uint16_t rx_free_thresh; /**< max free RX desc to hold. */
+ uint16_t queue_id; /**< RX queue index. */
uint16_t reg_idx; /**< RX queue register index. */
+ /**< Packet type mask for different NICs. */
+ uint16_t pkt_type_mask;
+ uint16_t port_id; /**< Device port identifier. */
uint8_t crc_len; /**< 0 if CRC stripped, 4 otherwise. */
uint8_t drop_en; /**< If not 0, set SRRCTL.Drop_En. */
+ uint8_t rx_deferred_start; /**< not in global dev start. */
uint64_t offloads; /**< Rx offloads with DEV_RX_OFFLOAD_* */
+ /** need to alloc dummy mbuf, for wraparound when scanning hw ring */
+ struct rte_mbuf fake_mbuf;
+ /** hold packets to return to application */
+ struct rte_mbuf *rx_stage[RTE_PMD_TXGBE_RX_MAX_BURST * 2];
};
/**
* Structure associated with each TX queue.
*/
struct txgbe_tx_queue {
+ /** TX ring virtual address. */
+ volatile struct txgbe_tx_desc *tx_ring;
uint64_t tx_ring_phys_addr; /**< TX ring DMA address. */
+ union {
+ /**< address of SW ring for scalar PMD. */
+ struct txgbe_tx_entry *sw_ring;
+ /**< address of SW ring for vector PMD */
+ struct txgbe_tx_entry_v *sw_ring_v;
+ };
+ volatile uint32_t *tdt_reg_addr; /**< Address of TDT register. */
+ volatile uint32_t *tdc_reg_addr; /**< Address of TDC register. */
uint16_t nb_tx_desc; /**< number of TX descriptors. */
/**< Start freeing TX buffers if there are less free descriptors than
* this value.
*/
uint16_t tx_free_thresh;
+ uint16_t queue_id; /**< TX queue index. */
uint16_t reg_idx; /**< TX queue register index. */
+ uint16_t port_id; /**< Device port identifier. */
+ uint8_t pthresh; /**< Prefetch threshold register. */
+ uint8_t hthresh; /**< Host threshold register. */
+ uint8_t wthresh; /**< Write-back threshold reg. */
uint64_t offloads; /**< Tx offload flags of DEV_TX_OFFLOAD_* */
+ const struct txgbe_txq_ops *ops; /**< txq ops */
+ uint8_t tx_deferred_start; /**< not in global dev start. */
+};
+
+struct txgbe_txq_ops {
+ void (*release_mbufs)(struct txgbe_tx_queue *txq);
+ void (*free_swring)(struct txgbe_tx_queue *txq);
+ void (*reset)(struct txgbe_tx_queue *txq);
};
+/* Takes an ethdev and a queue and sets up the tx function to be used based on
+ * the queue parameters. Used in tx_queue_setup by primary process and then
+ * in dev_init by secondary process when attaching to an existing ethdev.
+ */
+void txgbe_set_tx_function(struct rte_eth_dev *dev, struct txgbe_tx_queue *txq);
+
void txgbe_set_rx_function(struct rte_eth_dev *dev);
uint64_t txgbe_get_tx_port_offloads(struct rte_eth_dev *dev);
--
2.18.4
next prev parent reply other threads:[~2020-10-19 9:00 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-19 8:53 [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 01/58] net/txgbe: add build and doc infrastructure Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 02/58] net/txgbe: add ethdev probe and remove Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 03/58] net/txgbe: add device init and uninit Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 04/58] net/txgbe: add error types and registers Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 05/58] net/txgbe: add MAC type and bus lan id Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 06/58] net/txgbe: add HW infrastructure and dummy function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 07/58] net/txgbe: add EEPROM functions Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 08/58] net/txgbe: add HW init and reset operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 09/58] net/txgbe: add PHY init Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 10/58] net/txgbe: add module identify Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 11/58] net/txgbe: add PHY reset Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 12/58] net/txgbe: add info get operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 13/58] net/txgbe: add interrupt operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 14/58] net/txgbe: add device configure operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 15/58] net/txgbe: add link status change Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 16/58] net/txgbe: add multi-speed link setup Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 17/58] net/txgbe: add autoc read and write Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 18/58] net/txgbe: add MAC address operations Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 19/58] net/txgbe: add unicast hash bitmap Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 20/58] net/txgbe: add Rx and Tx init Jiawen Wu
2020-10-19 8:53 ` Jiawen Wu [this message]
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 22/58] net/txgbe: add Rx and Tx start and stop Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 23/58] net/txgbe: add packet type Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 24/58] net/txgbe: fill simple transmit function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 25/58] net/txgbe: fill transmit function with hardware offload Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 26/58] net/txgbe: fill Tx prepare function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 27/58] net/txgbe: fill receive functions Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 28/58] net/txgbe: add device start operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 29/58] net/txgbe: add Rx and Tx data path start and stop Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 30/58] net/txgbe: add device stop and close operations Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 31/58] net/txgbe: support Rx interrupt Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 32/58] net/txgbe: add Rx and Tx queue info get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 33/58] net/txgbe: add device stats get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 34/58] net/txgbe: add device xstats get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 35/58] net/txgbe: add queue stats mapping Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 36/58] net/txgbe: add VLAN handle support Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 37/58] net/txgbe: add SWFW semaphore and lock Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 38/58] net/txgbe: add PF module init and uninit for SRIOV Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 39/58] net/txgbe: add process mailbox operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 40/58] net/txgbe: add PF module configure for SRIOV Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 41/58] net/txgbe: add VMDq configure Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 42/58] net/txgbe: add RSS support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 43/58] net/txgbe: add DCB support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 44/58] net/txgbe: add flow control support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 45/58] net/txgbe: add FC auto negotiation support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 46/58] net/txgbe: add priority flow control support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 47/58] net/txgbe: add device promiscuous and allmulticast mode Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 48/58] net/txgbe: add MTU set operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 49/58] net/txgbe: add FW version get operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 50/58] net/txgbe: add EEPROM info " Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 51/58] net/txgbe: add register dump support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 52/58] net/txgbe: support device LED on and off Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 53/58] net/txgbe: add mirror rule operations Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 54/58] net/txgbe: add PTP support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 55/58] net/txgbe: add DCB info get operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 56/58] net/txgbe: add Rx and Tx descriptor status Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 57/58] net/txgbe: change stop operation callback to return int Jiawen Wu
2020-10-26 14:55 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 58/58] net/txgbe: introduce log type in the driver documentation Jiawen Wu
2020-10-26 14:55 ` Ferruh Yigit
2020-10-22 11:23 ` [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-22 11:44 ` Ferruh Yigit
2020-10-26 14:55 ` Ferruh Yigit
2020-10-27 2:39 ` Jiawen Wu
2020-10-27 11:37 ` Ferruh Yigit
2020-11-03 23:08 ` Thomas Monjalon
2020-11-04 17:24 ` Ferruh Yigit
2020-11-05 1:55 ` Jiawen Wu
2020-11-05 8:55 ` Jiawen Wu
2020-11-05 9:28 ` Thomas Monjalon
2020-11-06 6:28 ` Honnappa Nagarahalli
2020-11-06 9:22 ` Jiawen Wu
2020-11-06 17:36 ` Honnappa Nagarahalli
2020-11-06 18:21 ` Honnappa Nagarahalli
2020-11-06 19:00 ` Thomas Monjalon
2020-11-06 19:56 ` Honnappa Nagarahalli
2020-11-07 9:55 ` Thomas Monjalon
2020-10-27 8:48 ` David Marchand
2020-10-27 11:36 ` Ferruh Yigit
2020-10-27 11:39 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201019085415.82207-22-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).