From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v4 31/58] net/txgbe: support Rx interrupt
Date: Mon, 19 Oct 2020 16:53:48 +0800 [thread overview]
Message-ID: <20201019085415.82207-32-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20201019085415.82207-1-jiawenwu@trustnetic.com>
Support rx queue interrupt.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/features/txgbe.ini | 1 +
doc/guides/nics/txgbe.rst | 1 +
drivers/net/txgbe/txgbe_ethdev.c | 43 ++++++++++++++++++++++++++++++
3 files changed, 45 insertions(+)
diff --git a/doc/guides/nics/features/txgbe.ini b/doc/guides/nics/features/txgbe.ini
index c8cd58ce2..b2f5f832c 100644
--- a/doc/guides/nics/features/txgbe.ini
+++ b/doc/guides/nics/features/txgbe.ini
@@ -7,6 +7,7 @@
Speed capabilities = Y
Link status = Y
Link status event = Y
+Rx interrupt = Y
Queue start/stop = Y
Jumbo frame = Y
Scattered Rx = Y
diff --git a/doc/guides/nics/txgbe.rst b/doc/guides/nics/txgbe.rst
index 101765a6c..1bf4b6b6f 100644
--- a/doc/guides/nics/txgbe.rst
+++ b/doc/guides/nics/txgbe.rst
@@ -17,6 +17,7 @@ Features
- TSO offload
- Jumbo frames
- Link state information
+- Interrupt mode for RX
- Scattered and gather for TX and RX
- LRO
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index 3ef99f31e..9151542ef 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -1558,6 +1558,47 @@ txgbe_uc_all_hash_table_set(struct rte_eth_dev *dev, uint8_t on)
return 0;
}
+static int
+txgbe_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
+{
+ struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
+ struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
+ uint32_t mask;
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+
+ if (queue_id < 32) {
+ mask = rd32(hw, TXGBE_IMS(0));
+ mask &= (1 << queue_id);
+ wr32(hw, TXGBE_IMS(0), mask);
+ } else if (queue_id < 64) {
+ mask = rd32(hw, TXGBE_IMS(1));
+ mask &= (1 << (queue_id - 32));
+ wr32(hw, TXGBE_IMS(1), mask);
+ }
+ rte_intr_enable(intr_handle);
+
+ return 0;
+}
+
+static int
+txgbe_dev_rx_queue_intr_disable(struct rte_eth_dev *dev, uint16_t queue_id)
+{
+ uint32_t mask;
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+
+ if (queue_id < 32) {
+ mask = rd32(hw, TXGBE_IMS(0));
+ mask &= ~(1 << queue_id);
+ wr32(hw, TXGBE_IMS(0), mask);
+ } else if (queue_id < 64) {
+ mask = rd32(hw, TXGBE_IMS(1));
+ mask &= ~(1 << (queue_id - 32));
+ wr32(hw, TXGBE_IMS(1), mask);
+ }
+
+ return 0;
+}
+
/**
* set the IVAR registers, mapping interrupt causes to vectors
* @param hw
@@ -1691,6 +1732,8 @@ static const struct eth_dev_ops txgbe_eth_dev_ops = {
.tx_queue_start = txgbe_dev_tx_queue_start,
.tx_queue_stop = txgbe_dev_tx_queue_stop,
.rx_queue_setup = txgbe_dev_rx_queue_setup,
+ .rx_queue_intr_enable = txgbe_dev_rx_queue_intr_enable,
+ .rx_queue_intr_disable = txgbe_dev_rx_queue_intr_disable,
.rx_queue_release = txgbe_dev_rx_queue_release,
.tx_queue_setup = txgbe_dev_tx_queue_setup,
.tx_queue_release = txgbe_dev_tx_queue_release,
--
2.18.4
next prev parent reply other threads:[~2020-10-19 9:06 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-19 8:53 [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 01/58] net/txgbe: add build and doc infrastructure Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 02/58] net/txgbe: add ethdev probe and remove Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 03/58] net/txgbe: add device init and uninit Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 04/58] net/txgbe: add error types and registers Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 05/58] net/txgbe: add MAC type and bus lan id Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 06/58] net/txgbe: add HW infrastructure and dummy function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 07/58] net/txgbe: add EEPROM functions Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 08/58] net/txgbe: add HW init and reset operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 09/58] net/txgbe: add PHY init Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 10/58] net/txgbe: add module identify Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 11/58] net/txgbe: add PHY reset Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 12/58] net/txgbe: add info get operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 13/58] net/txgbe: add interrupt operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 14/58] net/txgbe: add device configure operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 15/58] net/txgbe: add link status change Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 16/58] net/txgbe: add multi-speed link setup Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 17/58] net/txgbe: add autoc read and write Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 18/58] net/txgbe: add MAC address operations Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 19/58] net/txgbe: add unicast hash bitmap Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 20/58] net/txgbe: add Rx and Tx init Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 21/58] net/txgbe: add Rx and Tx queues setup and release Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 22/58] net/txgbe: add Rx and Tx start and stop Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 23/58] net/txgbe: add packet type Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 24/58] net/txgbe: fill simple transmit function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 25/58] net/txgbe: fill transmit function with hardware offload Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 26/58] net/txgbe: fill Tx prepare function Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 27/58] net/txgbe: fill receive functions Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 28/58] net/txgbe: add device start operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 29/58] net/txgbe: add Rx and Tx data path start and stop Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 30/58] net/txgbe: add device stop and close operations Jiawen Wu
2020-10-19 8:53 ` Jiawen Wu [this message]
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 32/58] net/txgbe: add Rx and Tx queue info get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 33/58] net/txgbe: add device stats get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 34/58] net/txgbe: add device xstats get Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 35/58] net/txgbe: add queue stats mapping Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 36/58] net/txgbe: add VLAN handle support Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 37/58] net/txgbe: add SWFW semaphore and lock Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 38/58] net/txgbe: add PF module init and uninit for SRIOV Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 39/58] net/txgbe: add process mailbox operation Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 40/58] net/txgbe: add PF module configure for SRIOV Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 41/58] net/txgbe: add VMDq configure Jiawen Wu
2020-10-19 8:53 ` [dpdk-dev] [PATCH v4 42/58] net/txgbe: add RSS support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 43/58] net/txgbe: add DCB support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 44/58] net/txgbe: add flow control support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 45/58] net/txgbe: add FC auto negotiation support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 46/58] net/txgbe: add priority flow control support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 47/58] net/txgbe: add device promiscuous and allmulticast mode Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 48/58] net/txgbe: add MTU set operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 49/58] net/txgbe: add FW version get operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 50/58] net/txgbe: add EEPROM info " Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 51/58] net/txgbe: add register dump support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 52/58] net/txgbe: support device LED on and off Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 53/58] net/txgbe: add mirror rule operations Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 54/58] net/txgbe: add PTP support Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 55/58] net/txgbe: add DCB info get operation Jiawen Wu
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 56/58] net/txgbe: add Rx and Tx descriptor status Jiawen Wu
2020-10-26 14:54 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 57/58] net/txgbe: change stop operation callback to return int Jiawen Wu
2020-10-26 14:55 ` Ferruh Yigit
2020-10-19 8:54 ` [dpdk-dev] [PATCH v4 58/58] net/txgbe: introduce log type in the driver documentation Jiawen Wu
2020-10-26 14:55 ` Ferruh Yigit
2020-10-22 11:23 ` [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-22 11:44 ` Ferruh Yigit
2020-10-26 14:55 ` Ferruh Yigit
2020-10-27 2:39 ` Jiawen Wu
2020-10-27 11:37 ` Ferruh Yigit
2020-11-03 23:08 ` Thomas Monjalon
2020-11-04 17:24 ` Ferruh Yigit
2020-11-05 1:55 ` Jiawen Wu
2020-11-05 8:55 ` Jiawen Wu
2020-11-05 9:28 ` Thomas Monjalon
2020-11-06 6:28 ` Honnappa Nagarahalli
2020-11-06 9:22 ` Jiawen Wu
2020-11-06 17:36 ` Honnappa Nagarahalli
2020-11-06 18:21 ` Honnappa Nagarahalli
2020-11-06 19:00 ` Thomas Monjalon
2020-11-06 19:56 ` Honnappa Nagarahalli
2020-11-07 9:55 ` Thomas Monjalon
2020-10-27 8:48 ` David Marchand
2020-10-27 11:36 ` Ferruh Yigit
2020-10-27 11:39 ` David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201019085415.82207-32-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).