DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v4 55/58] net/txgbe: add DCB info get operation
Date: Mon, 19 Oct 2020 16:54:12 +0800	[thread overview]
Message-ID: <20201019085415.82207-56-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20201019085415.82207-1-jiawenwu@trustnetic.com>

Add DCB information get operation.

Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
 drivers/net/txgbe/txgbe_ethdev.c | 91 ++++++++++++++++++++++++++++++++
 1 file changed, 91 insertions(+)

diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index ddf92f1bd..77292f07f 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -4087,6 +4087,96 @@ txgbe_rss_update_sp(enum txgbe_mac_type mac_type)
 	}
 }
 
+static int
+txgbe_dev_get_dcb_info(struct rte_eth_dev *dev,
+			struct rte_eth_dcb_info *dcb_info)
+{
+	struct txgbe_dcb_config *dcb_config = TXGBE_DEV_DCB_CONFIG(dev);
+	struct txgbe_dcb_tc_config *tc;
+	struct rte_eth_dcb_tc_queue_mapping *tc_queue;
+	uint8_t nb_tcs;
+	uint8_t i, j;
+
+	if (dev->data->dev_conf.rxmode.mq_mode & ETH_MQ_RX_DCB_FLAG)
+		dcb_info->nb_tcs = dcb_config->num_tcs.pg_tcs;
+	else
+		dcb_info->nb_tcs = 1;
+
+	tc_queue = &dcb_info->tc_queue;
+	nb_tcs = dcb_info->nb_tcs;
+
+	if (dcb_config->vt_mode) { /* vt is enabled */
+		struct rte_eth_vmdq_dcb_conf *vmdq_rx_conf =
+				&dev->data->dev_conf.rx_adv_conf.vmdq_dcb_conf;
+		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++)
+			dcb_info->prio_tc[i] = vmdq_rx_conf->dcb_tc[i];
+		if (RTE_ETH_DEV_SRIOV(dev).active > 0) {
+			for (j = 0; j < nb_tcs; j++) {
+				tc_queue->tc_rxq[0][j].base = j;
+				tc_queue->tc_rxq[0][j].nb_queue = 1;
+				tc_queue->tc_txq[0][j].base = j;
+				tc_queue->tc_txq[0][j].nb_queue = 1;
+			}
+		} else {
+			for (i = 0; i < vmdq_rx_conf->nb_queue_pools; i++) {
+				for (j = 0; j < nb_tcs; j++) {
+					tc_queue->tc_rxq[i][j].base =
+						i * nb_tcs + j;
+					tc_queue->tc_rxq[i][j].nb_queue = 1;
+					tc_queue->tc_txq[i][j].base =
+						i * nb_tcs + j;
+					tc_queue->tc_txq[i][j].nb_queue = 1;
+				}
+			}
+		}
+	} else { /* vt is disabled */
+		struct rte_eth_dcb_rx_conf *rx_conf =
+				&dev->data->dev_conf.rx_adv_conf.dcb_rx_conf;
+		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++)
+			dcb_info->prio_tc[i] = rx_conf->dcb_tc[i];
+		if (dcb_info->nb_tcs == ETH_4_TCS) {
+			for (i = 0; i < dcb_info->nb_tcs; i++) {
+				dcb_info->tc_queue.tc_rxq[0][i].base = i * 32;
+				dcb_info->tc_queue.tc_rxq[0][i].nb_queue = 16;
+			}
+			dcb_info->tc_queue.tc_txq[0][0].base = 0;
+			dcb_info->tc_queue.tc_txq[0][1].base = 64;
+			dcb_info->tc_queue.tc_txq[0][2].base = 96;
+			dcb_info->tc_queue.tc_txq[0][3].base = 112;
+			dcb_info->tc_queue.tc_txq[0][0].nb_queue = 64;
+			dcb_info->tc_queue.tc_txq[0][1].nb_queue = 32;
+			dcb_info->tc_queue.tc_txq[0][2].nb_queue = 16;
+			dcb_info->tc_queue.tc_txq[0][3].nb_queue = 16;
+		} else if (dcb_info->nb_tcs == ETH_8_TCS) {
+			for (i = 0; i < dcb_info->nb_tcs; i++) {
+				dcb_info->tc_queue.tc_rxq[0][i].base = i * 16;
+				dcb_info->tc_queue.tc_rxq[0][i].nb_queue = 16;
+			}
+			dcb_info->tc_queue.tc_txq[0][0].base = 0;
+			dcb_info->tc_queue.tc_txq[0][1].base = 32;
+			dcb_info->tc_queue.tc_txq[0][2].base = 64;
+			dcb_info->tc_queue.tc_txq[0][3].base = 80;
+			dcb_info->tc_queue.tc_txq[0][4].base = 96;
+			dcb_info->tc_queue.tc_txq[0][5].base = 104;
+			dcb_info->tc_queue.tc_txq[0][6].base = 112;
+			dcb_info->tc_queue.tc_txq[0][7].base = 120;
+			dcb_info->tc_queue.tc_txq[0][0].nb_queue = 32;
+			dcb_info->tc_queue.tc_txq[0][1].nb_queue = 32;
+			dcb_info->tc_queue.tc_txq[0][2].nb_queue = 16;
+			dcb_info->tc_queue.tc_txq[0][3].nb_queue = 16;
+			dcb_info->tc_queue.tc_txq[0][4].nb_queue = 8;
+			dcb_info->tc_queue.tc_txq[0][5].nb_queue = 8;
+			dcb_info->tc_queue.tc_txq[0][6].nb_queue = 8;
+			dcb_info->tc_queue.tc_txq[0][7].nb_queue = 8;
+		}
+	}
+	for (i = 0; i < dcb_info->nb_tcs; i++) {
+		tc = &dcb_config->tc_config[i];
+		dcb_info->tc_bws[i] = tc->path[TXGBE_DCB_TX_CONFIG].bwg_percent;
+	}
+	return 0;
+}
+
 static const struct eth_dev_ops txgbe_eth_dev_ops = {
 	.dev_configure              = txgbe_dev_configure,
 	.dev_infos_get              = txgbe_dev_info_get,
@@ -4156,6 +4246,7 @@ static const struct eth_dev_ops txgbe_eth_dev_ops = {
 	.set_eeprom                 = txgbe_set_eeprom,
 	.get_module_info            = txgbe_get_module_info,
 	.get_module_eeprom          = txgbe_get_module_eeprom,
+	.get_dcb_info               = txgbe_dev_get_dcb_info,
 	.timesync_adjust_time       = txgbe_timesync_adjust_time,
 	.timesync_read_time         = txgbe_timesync_read_time,
 	.timesync_write_time        = txgbe_timesync_write_time,
-- 
2.18.4


  parent reply	other threads:[~2020-10-19  9:15 UTC|newest]

Thread overview: 84+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-19  8:53 [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 01/58] net/txgbe: add build and doc infrastructure Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 02/58] net/txgbe: add ethdev probe and remove Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 03/58] net/txgbe: add device init and uninit Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 04/58] net/txgbe: add error types and registers Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 05/58] net/txgbe: add MAC type and bus lan id Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 06/58] net/txgbe: add HW infrastructure and dummy function Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 07/58] net/txgbe: add EEPROM functions Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 08/58] net/txgbe: add HW init and reset operation Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 09/58] net/txgbe: add PHY init Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 10/58] net/txgbe: add module identify Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 11/58] net/txgbe: add PHY reset Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 12/58] net/txgbe: add info get operation Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 13/58] net/txgbe: add interrupt operation Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 14/58] net/txgbe: add device configure operation Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 15/58] net/txgbe: add link status change Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 16/58] net/txgbe: add multi-speed link setup Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 17/58] net/txgbe: add autoc read and write Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 18/58] net/txgbe: add MAC address operations Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 19/58] net/txgbe: add unicast hash bitmap Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 20/58] net/txgbe: add Rx and Tx init Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 21/58] net/txgbe: add Rx and Tx queues setup and release Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 22/58] net/txgbe: add Rx and Tx start and stop Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 23/58] net/txgbe: add packet type Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 24/58] net/txgbe: fill simple transmit function Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 25/58] net/txgbe: fill transmit function with hardware offload Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 26/58] net/txgbe: fill Tx prepare function Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 27/58] net/txgbe: fill receive functions Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 28/58] net/txgbe: add device start operation Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 29/58] net/txgbe: add Rx and Tx data path start and stop Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 30/58] net/txgbe: add device stop and close operations Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 31/58] net/txgbe: support Rx interrupt Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 32/58] net/txgbe: add Rx and Tx queue info get Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 33/58] net/txgbe: add device stats get Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 34/58] net/txgbe: add device xstats get Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 35/58] net/txgbe: add queue stats mapping Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 36/58] net/txgbe: add VLAN handle support Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 37/58] net/txgbe: add SWFW semaphore and lock Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 38/58] net/txgbe: add PF module init and uninit for SRIOV Jiawen Wu
2020-10-26 14:54   ` Ferruh Yigit
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 39/58] net/txgbe: add process mailbox operation Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 40/58] net/txgbe: add PF module configure for SRIOV Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 41/58] net/txgbe: add VMDq configure Jiawen Wu
2020-10-19  8:53 ` [dpdk-dev] [PATCH v4 42/58] net/txgbe: add RSS support Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 43/58] net/txgbe: add DCB support Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 44/58] net/txgbe: add flow control support Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 45/58] net/txgbe: add FC auto negotiation support Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 46/58] net/txgbe: add priority flow control support Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 47/58] net/txgbe: add device promiscuous and allmulticast mode Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 48/58] net/txgbe: add MTU set operation Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 49/58] net/txgbe: add FW version get operation Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 50/58] net/txgbe: add EEPROM info " Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 51/58] net/txgbe: add register dump support Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 52/58] net/txgbe: support device LED on and off Jiawen Wu
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 53/58] net/txgbe: add mirror rule operations Jiawen Wu
2020-10-26 14:54   ` Ferruh Yigit
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 54/58] net/txgbe: add PTP support Jiawen Wu
2020-10-19  8:54 ` Jiawen Wu [this message]
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 56/58] net/txgbe: add Rx and Tx descriptor status Jiawen Wu
2020-10-26 14:54   ` Ferruh Yigit
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 57/58] net/txgbe: change stop operation callback to return int Jiawen Wu
2020-10-26 14:55   ` Ferruh Yigit
2020-10-19  8:54 ` [dpdk-dev] [PATCH v4 58/58] net/txgbe: introduce log type in the driver documentation Jiawen Wu
2020-10-26 14:55   ` Ferruh Yigit
2020-10-22 11:23 ` [dpdk-dev] [PATCH v4 00/58] net: txgbe PMD Jiawen Wu
2020-10-22 11:44   ` Ferruh Yigit
2020-10-26 14:55 ` Ferruh Yigit
2020-10-27  2:39   ` Jiawen Wu
2020-10-27 11:37     ` Ferruh Yigit
2020-11-03 23:08       ` Thomas Monjalon
2020-11-04 17:24         ` Ferruh Yigit
2020-11-05  1:55           ` Jiawen Wu
2020-11-05  8:55           ` Jiawen Wu
2020-11-05  9:28             ` Thomas Monjalon
2020-11-06  6:28               ` Honnappa Nagarahalli
2020-11-06  9:22                 ` Jiawen Wu
2020-11-06 17:36                   ` Honnappa Nagarahalli
2020-11-06 18:21               ` Honnappa Nagarahalli
2020-11-06 19:00                 ` Thomas Monjalon
2020-11-06 19:56                   ` Honnappa Nagarahalli
2020-11-07  9:55                     ` Thomas Monjalon
2020-10-27  8:48   ` David Marchand
2020-10-27 11:36     ` Ferruh Yigit
2020-10-27 11:39       ` David Marchand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201019085415.82207-56-jiawenwu@trustnetic.com \
    --to=jiawenwu@trustnetic.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).