DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ibtisam Tariq <ibtisam.tariq@emumba.com>
To: marko.kovacevic@intel.com, konstantin.ananyev@intel.com,
	reshma.pattan@intel.com, john.mcnamara@intel.com,
	cristian.dumitrescu@intel.com, jasvinder.singh@intel.com,
	chenbo.xia@intel.com, maxime.coquelin@redhat.com,
	xiaoyun.li@intel.com
Cc: dev@dpdk.org, Ibtisam Tariq <ibtisam.tariq@emumba.com>
Subject: [dpdk-dev] [PATCH 2/8] examples/l3fwd-acl: enhance getopt_long usage
Date: Thu, 29 Oct 2020 12:53:33 +0000	[thread overview]
Message-ID: <20201029125339.30916-2-ibtisam.tariq@emumba.com> (raw)
In-Reply-To: <20201029125339.30916-1-ibtisam.tariq@emumba.com>

Instead of using getopt_long return value, strcmp was used to
compare the input parameters with the struct option array. This
patch get rid of all those strcmp by directly binding each longopt
with an int enum.

Bugzilla ID: 238
Fixes: 361b2e9559 ("acl: new sample l3fwd-acl")
Cc: konstantin.ananyev@intel.com

Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
---
 examples/l3fwd-acl/main.c | 189 +++++++++++++++++++-------------------
 1 file changed, 97 insertions(+), 92 deletions(-)

diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
index 961594f5f..5c8de1fc0 100644
--- a/examples/l3fwd-acl/main.c
+++ b/examples/l3fwd-acl/main.c
@@ -195,13 +195,24 @@ send_single_packet(struct rte_mbuf *m, uint16_t port);
 #define ACL_LEAD_CHAR		('@')
 #define ROUTE_LEAD_CHAR		('R')
 #define COMMENT_LEAD_CHAR	('#')
+
+enum{
 #define OPTION_CONFIG		"config"
+	OPTION_CONFIG_NUM = 256,
 #define OPTION_NONUMA		"no-numa"
+	OPTION_NONUMA_NUM,
 #define OPTION_ENBJMO		"enable-jumbo"
+	OPTION_ENBJMO_NUM,
 #define OPTION_RULE_IPV4	"rule_ipv4"
+	OPTION_RULE_IPV4_NUM,
 #define OPTION_RULE_IPV6	"rule_ipv6"
+	OPTION_RULE_IPV6_NUM,
 #define OPTION_ALG		"alg"
+	OPTION_ALG_NUM,
 #define OPTION_ETH_DEST		"eth-dest"
+	OPTION_ETH_DEST_NUM,
+};
+
 #define ACL_DENY_SIGNATURE	0xf0000000
 #define RTE_LOGTYPE_L3FWDACL	RTE_LOGTYPE_USER3
 #define acl_log(format, ...)	RTE_LOG(ERR, L3FWDACL, format, ##__VA_ARGS__)
@@ -1747,13 +1758,13 @@ parse_args(int argc, char **argv)
 	int option_index;
 	char *prgname = argv[0];
 	static struct option lgopts[] = {
-		{OPTION_CONFIG, 1, 0, 0},
-		{OPTION_NONUMA, 0, 0, 0},
-		{OPTION_ENBJMO, 0, 0, 0},
-		{OPTION_RULE_IPV4, 1, 0, 0},
-		{OPTION_RULE_IPV6, 1, 0, 0},
-		{OPTION_ALG, 1, 0, 0},
-		{OPTION_ETH_DEST, 1, 0, 0},
+		{OPTION_CONFIG, 1, NULL, OPTION_CONFIG_NUM},
+		{OPTION_NONUMA, 0, NULL, OPTION_NONUMA_NUM},
+		{OPTION_ENBJMO, 0, NULL, OPTION_ENBJMO_NUM},
+		{OPTION_RULE_IPV4, 1, NULL, OPTION_RULE_IPV4_NUM},
+		{OPTION_RULE_IPV6, 1, NULL, OPTION_RULE_IPV6_NUM},
+		{OPTION_ALG, 1, NULL, OPTION_ALG_NUM},
+		{OPTION_ETH_DEST, 1, NULL, OPTION_ETH_DEST_NUM},
 		{NULL, 0, 0, 0}
 	};
 
@@ -1778,98 +1789,92 @@ parse_args(int argc, char **argv)
 			break;
 
 		/* long options */
-		case 0:
-			if (!strncmp(lgopts[option_index].name,
-					OPTION_CONFIG,
-					sizeof(OPTION_CONFIG))) {
-				ret = parse_config(optarg);
-				if (ret) {
-					printf("invalid config\n");
-					print_usage(prgname);
-					return -1;
-				}
-			}
-
-			if (!strncmp(lgopts[option_index].name,
-					OPTION_NONUMA,
-					sizeof(OPTION_NONUMA))) {
-				printf("numa is disabled\n");
-				numa_on = 0;
-			}
-
-			if (!strncmp(lgopts[option_index].name,
-					OPTION_ENBJMO, sizeof(OPTION_ENBJMO))) {
-				struct option lenopts = {
-					"max-pkt-len",
-					required_argument,
-					0,
-					0
-				};
-
-				printf("jumbo frame is enabled\n");
-				port_conf.rxmode.offloads |=
-						DEV_RX_OFFLOAD_JUMBO_FRAME;
-				port_conf.txmode.offloads |=
-						DEV_TX_OFFLOAD_MULTI_SEGS;
-
-				/*
-				 * if no max-pkt-len set, then use the
-				 * default value RTE_ETHER_MAX_LEN
-				 */
-				if (0 == getopt_long(argc, argvopt, "",
-						&lenopts, &option_index)) {
-					ret = parse_max_pkt_len(optarg);
-					if ((ret < 64) ||
-						(ret > MAX_JUMBO_PKT_LEN)) {
-						printf("invalid packet "
-							"length\n");
-						print_usage(prgname);
-						return -1;
-					}
-					port_conf.rxmode.max_rx_pkt_len = ret;
-				}
-				printf("set jumbo frame max packet length "
-					"to %u\n",
-					(unsigned int)
-					port_conf.rxmode.max_rx_pkt_len);
-			}
-
-			if (!strncmp(lgopts[option_index].name,
-					OPTION_RULE_IPV4,
-					sizeof(OPTION_RULE_IPV4)))
-				parm_config.rule_ipv4_name = optarg;
-
-			if (!strncmp(lgopts[option_index].name,
-					OPTION_RULE_IPV6,
-					sizeof(OPTION_RULE_IPV6))) {
-				parm_config.rule_ipv6_name = optarg;
+		case OPTION_CONFIG_NUM:
+		{
+			ret = parse_config(optarg);
+			if (ret) {
+				printf("invalid config\n");
+				print_usage(prgname);
+				return -1;
 			}
-
-			if (!strncmp(lgopts[option_index].name,
-					OPTION_ALG, sizeof(OPTION_ALG))) {
-				parm_config.alg = parse_acl_alg(optarg);
-				if (parm_config.alg ==
-						RTE_ACL_CLASSIFY_DEFAULT) {
-					printf("unknown %s value:\"%s\"\n",
-						OPTION_ALG, optarg);
+			break;
+		}
+		case OPTION_NONUMA_NUM:
+		{
+			printf("numa is disabled\n");
+			numa_on = 0;
+			break;
+		}
+		case OPTION_ENBJMO_NUM:
+		{
+			struct option lenopts = {
+				"max-pkt-len",
+				required_argument,
+				0,
+				0
+			};
+
+			printf("jumbo frame is enabled\n");
+			port_conf.rxmode.offloads |=
+					DEV_RX_OFFLOAD_JUMBO_FRAME;
+			port_conf.txmode.offloads |=
+					DEV_TX_OFFLOAD_MULTI_SEGS;
+
+			/*
+			 * if no max-pkt-len set, then use the
+			 * default value RTE_ETHER_MAX_LEN
+			 */
+			if (0 == getopt_long(argc, argvopt, "",
+					&lenopts, &option_index)) {
+				ret = parse_max_pkt_len(optarg);
+				if ((ret < 64) ||
+					(ret > MAX_JUMBO_PKT_LEN)) {
+					printf("invalid packet "
+						"length\n");
 					print_usage(prgname);
 					return -1;
 				}
+				port_conf.rxmode.max_rx_pkt_len = ret;
 			}
-
-			if (!strncmp(lgopts[option_index].name, OPTION_ETH_DEST,
-					sizeof(OPTION_ETH_DEST))) {
-				const char *serr = parse_eth_dest(optarg);
-				if (serr != NULL) {
-					printf("invalid %s value:\"%s\": %s\n",
-						OPTION_ETH_DEST, optarg, serr);
-					print_usage(prgname);
-					return -1;
-				}
+			printf("set jumbo frame max packet length "
+				"to %u\n",
+				(unsigned int)
+				port_conf.rxmode.max_rx_pkt_len);
+			break;
+		}
+		case OPTION_RULE_IPV4_NUM:
+		{
+			parm_config.rule_ipv4_name = optarg;
+			break;
+		}
+		case OPTION_RULE_IPV6_NUM:
+		{
+			parm_config.rule_ipv6_name = optarg;
+			break;
+		}
+		case OPTION_ALG_NUM:
+		{
+			parm_config.alg = parse_acl_alg(optarg);
+			if (parm_config.alg ==
+					RTE_ACL_CLASSIFY_DEFAULT) {
+				printf("unknown %s value:\"%s\"\n",
+					OPTION_ALG, optarg);
+				print_usage(prgname);
+				return -1;
 			}
-
 			break;
-
+		}
+		case OPTION_ETH_DEST_NUM:
+		{
+			const char *serr = parse_eth_dest(optarg);
+			if (serr != NULL) {
+				printf("invalid %s value:\"%s\": %s\n",
+					OPTION_ETH_DEST, optarg, serr);
+				print_usage(prgname);
+				return -1;
+			}
+			break;
+		}
 		default:
 			print_usage(prgname);
 			return -1;
-- 
2.17.1


  reply	other threads:[~2020-10-29 12:55 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-29 12:53 [dpdk-dev] [PATCH 1/8] examples/fips_validation: " Ibtisam Tariq
2020-10-29 12:53 ` Ibtisam Tariq [this message]
2020-10-29 12:53 ` [dpdk-dev] [PATCH 3/8] examples/packet_ordering: " Ibtisam Tariq
2020-10-29 12:53 ` [dpdk-dev] [PATCH 4/8] examples/performance-thread/l3fwd-thread: " Ibtisam Tariq
2020-10-29 12:53 ` [dpdk-dev] [PATCH 5/8] examples/qos_sched: " Ibtisam Tariq
2020-10-29 12:53 ` [dpdk-dev] [PATCH 6/8] examples/vhost: " Ibtisam Tariq
2020-10-29 12:53 ` [dpdk-dev] [PATCH 7/8] examples/vhost_crypto: " Ibtisam Tariq
2020-10-29 12:53 ` [dpdk-dev] [PATCH 8/8] examples/tep_termination: " Ibtisam Tariq
2020-10-29 13:16   ` David Marchand
2020-11-02  8:18     ` Ibtisam Tariq
2020-10-29 22:07 ` [dpdk-dev] [PATCH 1/8] examples/fips_validation: " David Marchand
2020-11-02  8:32   ` Ibtisam Tariq
2020-11-04 10:00     ` Ibtisam Tariq
2020-11-05  8:59       ` David Marchand
2020-11-10  6:10         ` Ibtisam Tariq
2020-11-10  8:23           ` David Marchand
2020-11-10  9:03             ` Ibtisam Tariq

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201029125339.30916-2-ibtisam.tariq@emumba.com \
    --to=ibtisam.tariq@emumba.com \
    --cc=chenbo.xia@intel.com \
    --cc=cristian.dumitrescu@intel.com \
    --cc=dev@dpdk.org \
    --cc=jasvinder.singh@intel.com \
    --cc=john.mcnamara@intel.com \
    --cc=konstantin.ananyev@intel.com \
    --cc=marko.kovacevic@intel.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=reshma.pattan@intel.com \
    --cc=xiaoyun.li@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).