DPDK patches and discussions
 help / color / mirror / Atom feed
From: Thomas Monjalon <thomas@monjalon.net>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, david.marchand@redhat.com,
	bruce.richardson@intel.com, olivier.matz@6wind.com,
	andrew.rybchenko@oktetlabs.ru, akhil.goyal@nxp.com,
	jerinj@marvell.com, Wenzhuo Lu <wenzhuo.lu@intel.com>,
	Beilei Xing <beilei.xing@intel.com>,
	Bernard Iremonger <bernard.iremonger@intel.com>,
	Matan Azrad <matan@nvidia.com>,
	Shahaf Shuler <shahafs@nvidia.com>,
	Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Subject: [dpdk-dev] [PATCH v5 03/15] ethdev: register mbuf field and flags for timestamp
Date: Fri, 30 Oct 2020 18:29:28 +0100
Message-ID: <20201030172940.1073558-4-thomas@monjalon.net> (raw)
In-Reply-To: <20201030172940.1073558-1-thomas@monjalon.net>

During port configure or queue setup, the offload flags
DEV_RX_OFFLOAD_TIMESTAMP and DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP
trigger the registration of the related mbuf field and flags.

Previously, the Tx timestamp field and flag were registered in testpmd,
as described in mlx5 guide.
For the general usage of Rx and Tx timestamps,
managing registrations inside ethdev is simpler and properly documented.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
---
 app/test-pmd/config.c          | 38 ------------------
 doc/guides/nics/mlx5.rst       |  5 +--
 lib/librte_ethdev/rte_ethdev.c | 70 ++++++++++++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev.h |  9 ++++-
 lib/librte_mbuf/rte_mbuf_dyn.h |  1 +
 5 files changed, 81 insertions(+), 42 deletions(-)

diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 1668ae3238..9a2baf16fe 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -3955,44 +3955,6 @@ show_tx_pkt_times(void)
 void
 set_tx_pkt_times(unsigned int *tx_times)
 {
-	uint16_t port_id;
-	int offload_found = 0;
-	int offset;
-	int flag;
-
-	static const struct rte_mbuf_dynfield desc_offs = {
-		.name = RTE_MBUF_DYNFIELD_TIMESTAMP_NAME,
-		.size = sizeof(uint64_t),
-		.align = __alignof__(uint64_t),
-	};
-	static const struct rte_mbuf_dynflag desc_flag = {
-		.name = RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME,
-	};
-
-	RTE_ETH_FOREACH_DEV(port_id) {
-		struct rte_eth_dev_info dev_info = { 0 };
-		int ret;
-
-		ret = rte_eth_dev_info_get(port_id, &dev_info);
-		if (ret == 0 && dev_info.tx_offload_capa &
-				DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP) {
-			offload_found = 1;
-			break;
-		}
-	}
-	if (!offload_found) {
-		printf("No device supporting Tx timestamp scheduling found, "
-		       "dynamic flag and field not registered\n");
-		return;
-	}
-	offset = rte_mbuf_dynfield_register(&desc_offs);
-	if (offset < 0 && rte_errno != EEXIST)
-		printf("Dynamic timestamp field registration error: %d",
-		       rte_errno);
-	flag = rte_mbuf_dynflag_register(&desc_flag);
-	if (flag < 0 && rte_errno != EEXIST)
-		printf("Dynamic timestamp flag registration error: %d",
-		       rte_errno);
 	tx_pkt_times_inter = tx_times[0];
 	tx_pkt_times_intra = tx_times[1];
 }
diff --git a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst
index afa65a1379..fa8b13dd1b 100644
--- a/doc/guides/nics/mlx5.rst
+++ b/doc/guides/nics/mlx5.rst
@@ -237,9 +237,8 @@ Limitations
   ``txq_inline_max`` and ``txq_inline_mpw`` devargs keys.
 
 - To provide the packet send scheduling on mbuf timestamps the ``tx_pp``
-  parameter should be specified, RTE_MBUF_DYNFIELD_TIMESTAMP_NAME and
-  RTE_MBUF_DYNFLAG_TIMESTAMP_NAME should be registered by application.
-  When PMD sees the RTE_MBUF_DYNFLAG_TIMESTAMP_NAME set on the packet
+  parameter should be specified.
+  When PMD sees the RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME set on the packet
   being sent it tries to synchronize the time of packet appearing on
   the wire with the specified packet timestamp. It the specified one
   is in the past it should be ignored, if one is in the distant future
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index b12bb3854d..7c9aadb461 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -31,6 +31,7 @@
 #include <rte_mempool.h>
 #include <rte_malloc.h>
 #include <rte_mbuf.h>
+#include <rte_mbuf_dyn.h>
 #include <rte_errno.h>
 #include <rte_spinlock.h>
 #include <rte_string_fns.h>
@@ -1232,6 +1233,59 @@ eth_dev_check_lro_pkt_size(uint16_t port_id, uint32_t config_size,
 	return ret;
 }
 
+static inline int
+eth_dev_timestamp_mbuf_register(uint64_t rx_offloads, uint64_t tx_offloads)
+{
+	static const struct rte_mbuf_dynfield field_desc = {
+		.name = RTE_MBUF_DYNFIELD_TIMESTAMP_NAME,
+		.size = sizeof(rte_mbuf_timestamp_t),
+		.align = __alignof__(rte_mbuf_timestamp_t),
+	};
+	static const struct rte_mbuf_dynflag rx_flag_desc = {
+		.name = RTE_MBUF_DYNFLAG_RX_TIMESTAMP_NAME,
+	};
+	static const struct rte_mbuf_dynflag tx_flag_desc = {
+		.name = RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME,
+	};
+	static bool done_rx, done_tx;
+	bool todo_rx, todo_tx;
+	int offset;
+
+	todo_rx = (rx_offloads & DEV_RX_OFFLOAD_TIMESTAMP) != 0
+		&& !done_rx;
+	todo_tx = (tx_offloads & DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP) != 0
+		&& !done_tx;
+
+	if (todo_rx || todo_tx) {
+		offset = rte_mbuf_dynfield_register(&field_desc);
+		if (offset < 0) {
+			RTE_ETHDEV_LOG(ERR,
+					"Failed to register mbuf field for timestamp\n");
+			return -rte_errno;
+		}
+	}
+	if (todo_rx) {
+		offset = rte_mbuf_dynflag_register(&rx_flag_desc);
+		if (offset < 0) {
+			RTE_ETHDEV_LOG(ERR,
+					"Failed to register mbuf flag for Rx timestamp\n");
+			return -rte_errno;
+		}
+		done_rx = true;
+	}
+	if (todo_tx) {
+		offset = rte_mbuf_dynflag_register(&tx_flag_desc);
+		if (offset < 0) {
+			RTE_ETHDEV_LOG(ERR,
+					"Failed to register mbuf flag for Tx timestamp\n");
+			return -rte_errno;
+		}
+		done_tx = true;
+	}
+
+	return 0;
+}
+
 /*
  * Validate offloads that are requested through rte_eth_dev_configure against
  * the offloads successfully set by the ethernet device.
@@ -1481,6 +1535,12 @@ rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
 		goto rollback;
 	}
 
+	/* Register mbuf field and flags for timestamp offloads if enabled. */
+	ret = eth_dev_timestamp_mbuf_register(dev_conf->rxmode.offloads,
+			dev_conf->txmode.offloads);
+	if (ret != 0)
+		goto rollback;
+
 	/*
 	 * Setup new number of RX/TX queues and reconfigure device.
 	 */
@@ -2088,6 +2148,11 @@ rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,
 			return ret;
 	}
 
+	/* Register mbuf field and flag for Rx timestamp offload if enabled. */
+	ret = eth_dev_timestamp_mbuf_register(local_conf.offloads, 0);
+	if (ret != 0)
+		return ret;
+
 	ret = (*dev->dev_ops->rx_queue_setup)(dev, rx_queue_id, nb_rx_desc,
 					      socket_id, &local_conf, mp);
 	if (!ret) {
@@ -2268,6 +2333,11 @@ rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,
 		return -EINVAL;
 	}
 
+	/* Register mbuf field and flag for Tx timestamp offload if enabled. */
+	ret = eth_dev_timestamp_mbuf_register(0, local_conf.offloads);
+	if (ret != 0)
+		return ret;
+
 	rte_ethdev_trace_txq_setup(port_id, tx_queue_id, nb_tx_desc, tx_conf);
 	return eth_err(port_id, (*dev->dev_ops->tx_queue_setup)(dev,
 		       tx_queue_id, nb_tx_desc, socket_id, &local_conf));
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index ba997f16ce..3be0050592 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -1344,6 +1344,9 @@ struct rte_eth_conf {
 #define DEV_RX_OFFLOAD_VLAN_EXTEND	0x00000400
 #define DEV_RX_OFFLOAD_JUMBO_FRAME	0x00000800
 #define DEV_RX_OFFLOAD_SCATTER		0x00002000
+/**
+ * The mbuf field and flag are registered when the offload is configured.
+ */
 #define DEV_RX_OFFLOAD_TIMESTAMP	0x00004000
 #define DEV_RX_OFFLOAD_SECURITY         0x00008000
 #define DEV_RX_OFFLOAD_KEEP_CRC		0x00010000
@@ -1408,7 +1411,11 @@ struct rte_eth_conf {
 #define DEV_TX_OFFLOAD_IP_TNL_TSO       0x00080000
 /** Device supports outer UDP checksum */
 #define DEV_TX_OFFLOAD_OUTER_UDP_CKSUM  0x00100000
-/** Device supports send on timestamp */
+/**
+ * Device sends on time read from RTE_MBUF_DYNFIELD_TIMESTAMP_NAME
+ * if RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME is set in ol_flags.
+ * The mbuf field and flag are registered when the offload is configured.
+ */
 #define DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP 0x00200000
 /*
  * If new Tx offload capabilities are defined, they also must be
diff --git a/lib/librte_mbuf/rte_mbuf_dyn.h b/lib/librte_mbuf/rte_mbuf_dyn.h
index 5fb85c0610..d4d8f66f77 100644
--- a/lib/librte_mbuf/rte_mbuf_dyn.h
+++ b/lib/librte_mbuf/rte_mbuf_dyn.h
@@ -260,6 +260,7 @@ void rte_mbuf_dyn_dump(FILE *out);
  * used by PMD to schedule packet sending.
  */
 #define RTE_MBUF_DYNFIELD_TIMESTAMP_NAME "rte_dynfield_timestamp"
+typedef uint64_t rte_mbuf_timestamp_t;
 
 /**
  * Indicate that the timestamp field in the mbuf was filled by the driver.
-- 
2.28.0


  parent reply	other threads:[~2020-10-30 17:30 UTC|newest]

Thread overview: 178+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-26  5:20 [dpdk-dev] [PATCH 00/15] remove mbuf userdata Thomas Monjalon
2020-10-26  5:20 ` [dpdk-dev] [PATCH 01/15] examples: enclose DPDK includes with angle brackets Thomas Monjalon
2020-10-26 14:23   ` Andrew Rybchenko
2020-10-27 11:32   ` Bruce Richardson
2020-10-26  5:20 ` [dpdk-dev] [PATCH 02/15] kni: move header file from EAL Thomas Monjalon
2020-10-26 14:25   ` Andrew Rybchenko
2020-10-27 11:33   ` Bruce Richardson
2020-10-26  5:20 ` [dpdk-dev] [PATCH 03/15] mbuf: fix typo in dynamic field convention note Thomas Monjalon
2020-10-26 14:26   ` Andrew Rybchenko
2020-10-26  5:20 ` [dpdk-dev] [PATCH 04/15] node: switch IPv4 metadata to dynamic mbuf field Thomas Monjalon
2020-10-26 10:40   ` David Marchand
2020-10-26 14:29     ` Thomas Monjalon
2020-10-26 14:34       ` Andrew Rybchenko
2020-10-26 14:39         ` Thomas Monjalon
2020-10-26  5:20 ` [dpdk-dev] [PATCH 05/15] security: switch " Thomas Monjalon
2020-10-26 10:41   ` David Marchand
2020-10-26 14:30     ` Thomas Monjalon
2020-10-26 17:58     ` Akhil Goyal
2020-10-26 15:06   ` Andrew Rybchenko
2020-10-26 16:49     ` Thomas Monjalon
2020-10-26 19:03       ` Thomas Monjalon
2020-10-26  5:20 ` [dpdk-dev] [PATCH 06/15] event/sw: switch test counter " Thomas Monjalon
2020-10-26 15:09   ` Andrew Rybchenko
2020-10-26  5:20 ` [dpdk-dev] [PATCH 07/15] net/ark: ignore user data Thomas Monjalon
2020-10-26  5:20 ` [dpdk-dev] [PATCH 08/15] net/bnxt: switch CFA code to dynamic mbuf field Thomas Monjalon
2020-10-26 10:42   ` David Marchand
2020-10-26 14:32     ` Thomas Monjalon
2020-10-26  5:20 ` [dpdk-dev] [PATCH 09/15] net/vmxnet3: switch MSS hint " Thomas Monjalon
2020-10-26 15:14   ` Andrew Rybchenko
2020-10-26 15:21     ` Andrew Rybchenko
2020-10-26 16:50       ` Thomas Monjalon
2020-10-26 18:13         ` Thomas Monjalon
2020-10-26  5:21 ` [dpdk-dev] [PATCH 10/15] test/distributor: switch sequence " Thomas Monjalon
2020-10-26  9:39   ` Lukasz Wojciechowski
2020-10-26  5:21 ` [dpdk-dev] [PATCH 11/15] test/graph: switch user data " Thomas Monjalon
2020-10-26  5:21 ` [dpdk-dev] [PATCH 12/15] app/eventdev: switch flow ID " Thomas Monjalon
2020-10-26  5:21 ` [dpdk-dev] [PATCH 13/15] examples/bbdev: switch " Thomas Monjalon
2020-10-26  5:21 ` [dpdk-dev] [PATCH 14/15] examples/rxtx_callbacks: " Thomas Monjalon
2020-10-26 10:43   ` David Marchand
2020-10-26 14:33     ` Thomas Monjalon
2020-10-26 14:53       ` Stephen Hemminger
2020-10-26 16:32         ` Thomas Monjalon
2020-10-26  5:21 ` [dpdk-dev] [PATCH 15/15] mbuf: remove userdata field Thomas Monjalon
2020-10-26 22:19 ` [dpdk-dev] [PATCH v2 00/15] remove mbuf userdata Thomas Monjalon
2020-10-26 22:19   ` [dpdk-dev] [PATCH v2 01/15] examples: enclose DPDK includes with angle brackets Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 02/15] kni: move header file from EAL Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 03/15] mbuf: fix typo in dynamic field convention note Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 04/15] node: switch IPv4 metadata to dynamic mbuf field Thomas Monjalon
2020-10-27  9:32     ` Olivier Matz
2020-10-27  9:34       ` Thomas Monjalon
2020-10-27 14:23     ` Nithin Dabilpuram
2020-10-27 14:33       ` Thomas Monjalon
2020-10-27 15:33         ` Nithin Dabilpuram
2020-10-27 15:57           ` Thomas Monjalon
2020-10-27 16:16             ` Nithin Dabilpuram
2020-10-27 16:26               ` Thomas Monjalon
2020-10-28  9:30                 ` [dpdk-dev] [PATCH v4] " Nithin Dabilpuram
2020-10-28 10:08                   ` Thomas Monjalon
2020-10-28 10:24                     ` Van Haaren, Harry
2020-10-28 10:42                       ` Nithin Dabilpuram
2020-10-28 10:43                         ` Thomas Monjalon
2020-10-28 18:07                       ` Thomas Monjalon
2020-10-29 10:17                         ` Van Haaren, Harry
2020-10-28 10:33                     ` Nithin Dabilpuram
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 05/15] security: switch " Thomas Monjalon
2020-10-27  2:01     ` Wang, Haiyue
2020-10-27  8:52       ` Thomas Monjalon
2020-10-27 13:12         ` Wang, Haiyue
2020-10-27 10:05     ` Olivier Matz
2020-10-27 16:10       ` Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 06/15] event/sw: switch test counter " Thomas Monjalon
2020-10-27 10:15     ` Olivier Matz
2020-10-27 16:14       ` Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 07/15] net/ark: ignore user data Thomas Monjalon
2020-10-27 15:32     ` Ed Czeck
2020-10-27 15:55       ` Thomas Monjalon
2020-10-27 16:05         ` Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 08/15] net/bnxt: switch CFA code to dynamic mbuf field Thomas Monjalon
2020-10-27  4:44     ` Ajit Khaparde
2020-10-27 10:31     ` Olivier Matz
2020-10-27 16:22       ` Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 09/15] net/vmxnet3: switch MSS hint " Thomas Monjalon
2020-10-27 10:45     ` Olivier Matz
2020-10-27 16:25       ` Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 10/15] test/distributor: switch sequence " Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 11/15] test/graph: switch user data " Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 12/15] app/eventdev: switch flow ID " Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 13/15] examples/bbdev: switch " Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 14/15] examples/rxtx_callbacks: " Thomas Monjalon
2020-10-26 22:20   ` [dpdk-dev] [PATCH v2 15/15] mbuf: remove userdata field Thomas Monjalon
2020-10-27 10:53     ` Olivier Matz
2020-10-27 21:01 ` [dpdk-dev] [PATCH v3 00/15] remove mbuf userdata Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 01/15] examples: enclose DPDK includes with angle brackets Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 02/15] kni: move header file from EAL Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 03/15] mbuf: fix typo in dynamic field convention note Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 04/15] node: switch IPv4 metadata to dynamic mbuf field Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 05/15] security: switch " Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 06/15] event/sw: switch test counter " Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 07/15] net/ark: switch user data " Thomas Monjalon
2020-10-27 22:30     ` Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 08/15] net/bnxt: switch CFA code " Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 09/15] net/vmxnet3: switch MSS hint " Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 10/15] test/distributor: switch sequence " Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 11/15] test/graph: switch user data " Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 12/15] app/eventdev: switch flow ID " Thomas Monjalon
2020-10-28  4:54     ` Jerin Jacob
2020-10-28  7:43       ` Thomas Monjalon
2020-10-28  8:06         ` Jerin Jacob
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 13/15] examples/bbdev: switch " Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 14/15] examples/rxtx_callbacks: " Thomas Monjalon
2020-10-27 21:01   ` [dpdk-dev] [PATCH v3 15/15] mbuf: remove userdata field Thomas Monjalon
2020-10-28 10:26 ` [dpdk-dev] [PATCH v4 00/15] remove mbuf userdata Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 01/15] examples: enclose DPDK includes with angle brackets Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 02/15] kni: move header file from EAL Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 03/15] mbuf: fix typo in dynamic field convention note Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 04/15] node: switch IPv4 metadata to dynamic mbuf field Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 05/15] security: switch " Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 06/15] event/sw: switch test counter " Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 07/15] net/ark: switch user data to dynamic mbuf fields Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 08/15] net/bnxt: switch CFA code to dynamic mbuf field Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 09/15] net/vmxnet3: switch MSS hint " Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 10/15] test/distributor: switch sequence " Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 11/15] test/graph: switch user data " Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 12/15] app/eventdev: switch flow ID " Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 13/15] examples/bbdev: switch " Thomas Monjalon
2020-10-28 11:51     ` Andrew Rybchenko
2020-10-28 12:21       ` Thomas Monjalon
2020-10-28 12:55         ` Andrew Rybchenko
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 14/15] examples/rxtx_callbacks: " Thomas Monjalon
2020-10-28 10:26   ` [dpdk-dev] [PATCH v4 15/15] mbuf: remove userdata field Thomas Monjalon
2020-10-30 17:29 ` [dpdk-dev] [PATCH v5 00/15] remove mbuf userdata Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 01/15] eventdev: remove software Rx timestamp Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 02/15] mbuf: add Rx timestamp dynamic flag Thomas Monjalon
2020-11-01 20:03     ` Andrew Rybchenko
2020-10-30 17:29   ` Thomas Monjalon [this message]
2020-11-01 20:10     ` [dpdk-dev] [PATCH v5 03/15] ethdev: register mbuf field and flags for timestamp Andrew Rybchenko
2020-11-01 22:54       ` Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 04/15] latency: switch timestamp to dynamic mbuf field Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 05/15] net/ark: " Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 06/15] net/dpaa2: " Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 07/15] net/mlx5: fix dynamic mbuf offset lookup check Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 08/15] net/mlx5: switch timestamp to dynamic mbuf field Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 09/15] net/nfb: " Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 10/15] net/octeontx2: " Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 11/15] net/pcap: " Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 12/15] app/testpmd: " Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 13/15] examples/rxtx_callbacks: switch timestamp to dynamic field Thomas Monjalon
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 14/15] mbuf: remove deprecated timestamp field Thomas Monjalon
2020-11-01 20:13     ` Andrew Rybchenko
2020-10-30 17:29   ` [dpdk-dev] [PATCH v5 15/15] mbuf: move pool pointer in hotter first half Thomas Monjalon
2020-11-01 20:23     ` Andrew Rybchenko
2020-10-30 17:44 ` [dpdk-dev] [PATCH v6 00/15] remove mbuf userdata Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 01/15] examples: enclose DPDK includes with angle brackets Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 02/15] kni: move header file from EAL Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 03/15] mbuf: fix typo in dynamic field convention note Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 04/15] node: switch IPv4 metadata to dynamic mbuf field Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 05/15] security: switch " Thomas Monjalon
2020-10-31  8:56     ` David Marchand
2020-10-31  9:26       ` David Marchand
2020-10-31 14:38       ` Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 06/15] event/sw: switch test counter " Thomas Monjalon
2020-10-30 18:53     ` Van Haaren, Harry
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 07/15] net/ark: switch user data to dynamic mbuf fields Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 08/15] net/bnxt: switch CFA code to dynamic mbuf field Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 09/15] net/vmxnet3: switch MSS hint " Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 10/15] test/distributor: switch sequence " Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 11/15] test/graph: switch user data " Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 12/15] app/eventdev: switch flow ID " Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 13/15] examples/bbdev: switch " Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 14/15] examples/rxtx_callbacks: switch TSC to dynamic field Thomas Monjalon
2020-10-30 17:44   ` [dpdk-dev] [PATCH v6 15/15] mbuf: remove userdata field Thomas Monjalon
2020-10-31 15:07   ` [dpdk-dev] [PATCH v6 00/15] remove mbuf userdata Thomas Monjalon
2020-10-31 23:36     ` Ferruh Yigit
2020-11-01  9:15       ` Thomas Monjalon
2020-11-01 10:26         ` David Marchand
2020-11-02  9:11           ` Jiawen Wu
2020-11-02 11:08             ` Ferruh Yigit
2020-11-02 11:58               ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201030172940.1073558-4-thomas@monjalon.net \
    --to=thomas@monjalon.net \
    --cc=akhil.goyal@nxp.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=beilei.xing@intel.com \
    --cc=bernard.iremonger@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=jerinj@marvell.com \
    --cc=matan@nvidia.com \
    --cc=olivier.matz@6wind.com \
    --cc=shahafs@nvidia.com \
    --cc=viacheslavo@nvidia.com \
    --cc=wenzhuo.lu@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git