DPDK patches and discussions
 help / color / mirror / Atom feed
From: selwin.sebastian@amd.com
To: dev@dpdk.org
Cc: amaranath.somalapuram@amd.com
Subject: [dpdk-dev] [PATCH v1] net/axgbe: add support for device reset
Date: Thu, 19 Nov 2020 18:51:58 +0530	[thread overview]
Message-ID: <20201119132158.10821-1-selwin.sebastian@amd.com> (raw)

From: Selwin Sebastian <selwin.sebastian@amd.com>

Added support for device reset

Signed-off-by: Selwin Sebastian <selwin.sebastian@amd.com>
---
 drivers/net/axgbe/axgbe_ethdev.c | 75 ++++++++++++++++++++++++--------
 1 file changed, 56 insertions(+), 19 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_ethdev.c b/drivers/net/axgbe/axgbe_ethdev.c
index cfe6aba73..4c6366da8 100644
--- a/drivers/net/axgbe/axgbe_ethdev.c
+++ b/drivers/net/axgbe/axgbe_ethdev.c
@@ -16,6 +16,7 @@ static int  axgbe_dev_start(struct rte_eth_dev *dev);
 static int  axgbe_dev_stop(struct rte_eth_dev *dev);
 static void axgbe_dev_interrupt_handler(void *param);
 static int axgbe_dev_close(struct rte_eth_dev *dev);
+static int axgbe_dev_reset(struct rte_eth_dev *dev);
 static int axgbe_dev_promiscuous_enable(struct rte_eth_dev *dev);
 static int axgbe_dev_promiscuous_disable(struct rte_eth_dev *dev);
 static int axgbe_dev_allmulticast_enable(struct rte_eth_dev *dev);
@@ -215,6 +216,7 @@ static const struct eth_dev_ops axgbe_eth_dev_ops = {
 	.dev_start            = axgbe_dev_start,
 	.dev_stop             = axgbe_dev_stop,
 	.dev_close            = axgbe_dev_close,
+	.dev_reset            = axgbe_dev_reset,
 	.promiscuous_enable   = axgbe_dev_promiscuous_enable,
 	.promiscuous_disable  = axgbe_dev_promiscuous_disable,
 	.allmulticast_enable  = axgbe_dev_allmulticast_enable,
@@ -618,6 +620,20 @@ axgbe_dev_rss_hash_conf_get(struct rte_eth_dev *dev,
 	return 0;
 }
 
+static int
+axgbe_dev_reset(struct rte_eth_dev *dev)
+{
+	int ret = 0;
+
+	ret = axgbe_dev_close(dev);
+	if (ret)
+		return ret;
+
+	ret = eth_axgbe_dev_init(dev);
+
+	return ret;
+}
+
 static void
 axgbe_dev_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
 {
@@ -1104,22 +1120,33 @@ axgbe_dev_stats_get(struct rte_eth_dev *dev,
 
 	for (i = 0; i < dev->data->nb_rx_queues; i++) {
 		rxq = dev->data->rx_queues[i];
-		stats->q_ipackets[i] = rxq->pkts;
-		stats->ipackets += rxq->pkts;
-		stats->q_ibytes[i] = rxq->bytes;
-		stats->ibytes += rxq->bytes;
-		stats->rx_nombuf += rxq->rx_mbuf_alloc_failed;
-		stats->q_errors[i] = rxq->errors + rxq->rx_mbuf_alloc_failed;
-		stats->ierrors += rxq->errors;
+		if (rxq) {
+			stats->q_ipackets[i] = rxq->pkts;
+			stats->ipackets += rxq->pkts;
+			stats->q_ibytes[i] = rxq->bytes;
+			stats->ibytes += rxq->bytes;
+			stats->rx_nombuf += rxq->rx_mbuf_alloc_failed;
+			stats->q_errors[i] = rxq->errors
+				+ rxq->rx_mbuf_alloc_failed;
+			stats->ierrors += rxq->errors;
+		} else {
+			PMD_DRV_LOG(DEBUG, "Rx queue not setup for port %d\n",
+					dev->data->port_id);
+		}
 	}
 
 	for (i = 0; i < dev->data->nb_tx_queues; i++) {
 		txq = dev->data->tx_queues[i];
-		stats->q_opackets[i] = txq->pkts;
-		stats->opackets += txq->pkts;
-		stats->q_obytes[i] = txq->bytes;
-		stats->obytes += txq->bytes;
-		stats->oerrors += txq->errors;
+		if (txq) {
+			stats->q_opackets[i] = txq->pkts;
+			stats->opackets += txq->pkts;
+			stats->q_obytes[i] = txq->bytes;
+			stats->obytes += txq->bytes;
+			stats->oerrors += txq->errors;
+		} else {
+			PMD_DRV_LOG(DEBUG, "Tx queue not setup for port %d\n",
+					dev->data->port_id);
+		}
 	}
 
 	return 0;
@@ -1134,16 +1161,26 @@ axgbe_dev_stats_reset(struct rte_eth_dev *dev)
 
 	for (i = 0; i < dev->data->nb_rx_queues; i++) {
 		rxq = dev->data->rx_queues[i];
-		rxq->pkts = 0;
-		rxq->bytes = 0;
-		rxq->errors = 0;
-		rxq->rx_mbuf_alloc_failed = 0;
+		if (rxq) {
+			rxq->pkts = 0;
+			rxq->bytes = 0;
+			rxq->errors = 0;
+			rxq->rx_mbuf_alloc_failed = 0;
+		} else {
+			PMD_DRV_LOG(DEBUG, "Rx queue not setup for port %d\n",
+					dev->data->port_id);
+		}
 	}
 	for (i = 0; i < dev->data->nb_tx_queues; i++) {
 		txq = dev->data->tx_queues[i];
-		txq->pkts = 0;
-		txq->bytes = 0;
-		txq->errors = 0;
+		if (txq) {
+			txq->pkts = 0;
+			txq->bytes = 0;
+			txq->errors = 0;
+		} else {
+			PMD_DRV_LOG(DEBUG, "Tx queue not setup for port %d\n",
+					dev->data->port_id);
+		}
 	}
 
 	return 0;
-- 
2.17.1


             reply	other threads:[~2020-11-19 13:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-19 13:21 selwin.sebastian [this message]
2020-11-20  5:16 ` Somalapuram, Amaranath
2020-12-08 12:45   ` Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201119132158.10821-1-selwin.sebastian@amd.com \
    --to=selwin.sebastian@amd.com \
    --cc=amaranath.somalapuram@amd.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).