[dpdk-dev] [PATCH 09/35] net/mlx5/windows: add ethdev stub operations

[Tal Shnaiderman <talshn@nvidia.com>]

From: Ophir Munk <ophirmu@nvidia.com>

This commits adds ethdev stubs. These APIs are called from shared code
that must compile under Linux and Windows. The following stubs are added:
mlx5_set_mtu
mlx5_os_read_dev_counters
mlx5_intr_callback_unregister
mlx5_os_get_stats_n
mlx5_os_stats_init
mlx5_set_link_down
mlx5_set_link_up
mlx5_dev_get_flow_ctrl
mlx5_dev_set_flow_ctrl
mlx5_get_module_info
mlx5_get_module_eeprom

Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
---
 drivers/net/mlx5/windows/mlx5_ethdev_os.c | 199 ++++++++++++++++++++++++++++++
 1 file changed, 199 insertions(+)

diff --git a/drivers/net/mlx5/windows/mlx5_ethdev_os.c b/drivers/net/mlx5/windows/mlx5_ethdev_os.c
index 0662c095d1..4925fd893f 100644
--- a/drivers/net/mlx5/windows/mlx5_ethdev_os.c
+++ b/drivers/net/mlx5/windows/mlx5_ethdev_os.c
@@ -41,3 +41,202 @@ mlx5_get_mac(struct rte_eth_dev *dev, uint8_t (*mac)[RTE_ETHER_ADDR_LEN])
 	memcpy(mac, context_obj->mlx5_dev.eth_mac, RTE_ETHER_ADDR_LEN);
 	return 0;
 }
+
+/**
+ * Set device MTU.
+ *
+ * @param dev
+ *   Pointer to Ethernet device.
+ * @param mtu
+ *   MTU value to set.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(mtu);
+	return -ENOTSUP;
+}
+
+/*
+ * Unregister callback handler safely. The handler may be active
+ * while we are trying to unregister it, in this case code -EAGAIN
+ * is returned by rte_intr_callback_unregister(). This routine checks
+ * the return code and tries to unregister handler again.
+ *
+ * @param handle
+ *   interrupt handle
+ * @param cb_fn
+ *   pointer to callback routine
+ * @cb_arg
+ *   opaque callback parameter
+ */
+void
+mlx5_intr_callback_unregister(const struct rte_intr_handle *handle,
+			      rte_intr_callback_fn cb_fn, void *cb_arg)
+{
+	RTE_SET_USED(handle);
+	RTE_SET_USED(cb_fn);
+	RTE_SET_USED(cb_arg);
+}
+
+/**
+ * DPDK callback to get flow control status.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param[out] fc_conf
+ *   Flow control output buffer.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(fc_conf);
+	return -ENOTSUP;
+}
+
+/**
+ * DPDK callback to modify flow control parameters.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param[in] fc_conf
+ *   Flow control parameters.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(fc_conf);
+	return -ENOTSUP;
+}
+
+/**
+ * Query the number of statistics provided by ETHTOOL.
+ *
+ * @param dev
+ *   Pointer to Ethernet device.
+ *
+ * @return
+ *   Number of statistics on success, negative errno value otherwise and
+ *   rte_errno is set.
+ */
+int
+mlx5_os_get_stats_n(struct rte_eth_dev *dev)
+{
+	RTE_SET_USED(dev);
+	return -ENOTSUP;
+}
+
+/**
+ * Init the structures to read device counters.
+ *
+ * @param dev
+ *   Pointer to Ethernet device.
+ */
+void
+mlx5_os_stats_init(struct rte_eth_dev *dev)
+{
+	RTE_SET_USED(dev);
+}
+
+/**
+ * Read device counters table.
+ *
+ * @param dev
+ *   Pointer to Ethernet device.
+ * @param[out] stats
+ *   Counters table output buffer.
+ *
+ * @return
+ *   0 on success and stats is filled, negative errno value otherwise and
+ *   rte_errno is set.
+ */
+int
+mlx5_os_read_dev_counters(struct rte_eth_dev *dev, uint64_t *stats)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(stats);
+	return -ENOTSUP;
+}
+
+/**
+ * DPDK callback to bring the link DOWN.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise
+ */
+int
+mlx5_set_link_down(struct rte_eth_dev *dev)
+{
+	RTE_SET_USED(dev);
+	return -ENOTSUP;
+}
+
+/**
+ * DPDK callback to bring the link UP.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise
+ */
+int
+mlx5_set_link_up(struct rte_eth_dev *dev)
+{
+	RTE_SET_USED(dev);
+	return -ENOTSUP;
+}
+
+/**
+ * DPDK callback to retrieve plug-in module EEPROM information (type and size).
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param[out] modinfo
+ *   Storage for plug-in module EEPROM information.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_get_module_info(struct rte_eth_dev *dev,
+		     struct rte_eth_dev_module_info *modinfo)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(modinfo);
+	return -ENOTSUP;
+}
+
+/**
+ * DPDK callback to retrieve plug-in module EEPROM data.
+ *
+ * @param dev
+ *   Pointer to Ethernet device structure.
+ * @param[out] info
+ *   Storage for plug-in module EEPROM data.
+ *
+ * @return
+ *   0 on success, a negative errno value otherwise and rte_errno is set.
+ */
+int mlx5_get_module_eeprom(struct rte_eth_dev *dev,
+			   struct rte_dev_eeprom_info *info)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(info);
+	return -ENOTSUP;
+}
-- 
2.16.1.windows.4