From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v3 14/33] net/txgbe: configure flow director filter
Date: Fri, 18 Dec 2020 17:36:43 +0800 [thread overview]
Message-ID: <20201218093702.3651867-15-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20201218093702.3651867-1-jiawenwu@trustnetic.com>
Configure flow director filter with it enabled.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/base/txgbe_type.h | 6 +
drivers/net/txgbe/meson.build | 1 +
drivers/net/txgbe/txgbe_ethdev.c | 6 +
drivers/net/txgbe/txgbe_ethdev.h | 8 +
drivers/net/txgbe/txgbe_fdir.c | 434 ++++++++++++++++++++++++++++
5 files changed, 455 insertions(+)
create mode 100644 drivers/net/txgbe/txgbe_fdir.c
diff --git a/drivers/net/txgbe/base/txgbe_type.h b/drivers/net/txgbe/base/txgbe_type.h
index b9d31ab83..633692cd7 100644
--- a/drivers/net/txgbe/base/txgbe_type.h
+++ b/drivers/net/txgbe/base/txgbe_type.h
@@ -21,6 +21,8 @@
#define TXGBE_MAX_QP (128)
#define TXGBE_MAX_UTA 128
+#define TXGBE_FDIR_INIT_DONE_POLL 10
+
#define TXGBE_ALIGN 128 /* as intel did */
#include "txgbe_status.h"
@@ -65,6 +67,10 @@ enum {
#define TXGBE_PHYSICAL_LAYER_10BASE_T 0x08000
#define TXGBE_PHYSICAL_LAYER_2500BASE_KX 0x10000
+/* Software ATR hash keys */
+#define TXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2
+#define TXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614
+
#define TXGBE_ATR_HASH_MASK 0x7fff
/* Flow Director ATR input struct. */
diff --git a/drivers/net/txgbe/meson.build b/drivers/net/txgbe/meson.build
index 45379175d..bb1683631 100644
--- a/drivers/net/txgbe/meson.build
+++ b/drivers/net/txgbe/meson.build
@@ -6,6 +6,7 @@ objs = [base_objs]
sources = files(
'txgbe_ethdev.c',
+ 'txgbe_fdir.c',
'txgbe_flow.c',
'txgbe_ptypes.c',
'txgbe_pf.c',
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index eadb44aed..70abc3ec9 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -1633,6 +1633,12 @@ txgbe_dev_start(struct rte_eth_dev *dev)
txgbe_configure_port(dev);
txgbe_configure_dcb(dev);
+ if (dev->data->dev_conf.fdir_conf.mode != RTE_FDIR_MODE_NONE) {
+ err = txgbe_fdir_configure(dev);
+ if (err)
+ goto error;
+ }
+
/* Restore vf rate limit */
if (vfinfo != NULL) {
for (vf = 0; vf < pci_dev->max_vfs; vf++)
diff --git a/drivers/net/txgbe/txgbe_ethdev.h b/drivers/net/txgbe/txgbe_ethdev.h
index 77269e9b7..b49a9e475 100644
--- a/drivers/net/txgbe/txgbe_ethdev.h
+++ b/drivers/net/txgbe/txgbe_ethdev.h
@@ -10,6 +10,7 @@
#include "base/txgbe.h"
#include "txgbe_ptypes.h"
#include <rte_flow.h>
+#include <rte_flow_driver.h>
#include <rte_time.h>
#include <rte_ethdev.h>
#include <rte_ethdev_core.h>
@@ -432,6 +433,13 @@ txgbe_dev_l2_tunnel_filter_del(struct rte_eth_dev *dev,
void txgbe_set_ivar_map(struct txgbe_hw *hw, int8_t direction,
uint8_t queue, uint8_t msix_vector);
+/*
+ * Flow director function prototypes
+ */
+int txgbe_fdir_configure(struct rte_eth_dev *dev);
+int txgbe_fdir_set_input_mask(struct rte_eth_dev *dev);
+int txgbe_fdir_set_flexbytes_offset(struct rte_eth_dev *dev,
+ uint16_t offset);
void txgbe_configure_pb(struct rte_eth_dev *dev);
void txgbe_configure_port(struct rte_eth_dev *dev);
void txgbe_configure_dcb(struct rte_eth_dev *dev);
diff --git a/drivers/net/txgbe/txgbe_fdir.c b/drivers/net/txgbe/txgbe_fdir.c
new file mode 100644
index 000000000..c319b7f26
--- /dev/null
+++ b/drivers/net/txgbe/txgbe_fdir.c
@@ -0,0 +1,434 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2015-2020
+ */
+
+#include <stdio.h>
+#include <stdint.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <sys/queue.h>
+
+
+#include "txgbe_logs.h"
+#include "base/txgbe.h"
+#include "txgbe_ethdev.h"
+
+#define TXGBE_DEFAULT_FLEXBYTES_OFFSET 12 /*default flexbytes offset in bytes*/
+#define TXGBE_MAX_FLX_SOURCE_OFF 62
+
+#define IPV6_ADDR_TO_MASK(ipaddr, ipv6m) do { \
+ uint8_t ipv6_addr[16]; \
+ uint8_t i; \
+ rte_memcpy(ipv6_addr, (ipaddr), sizeof(ipv6_addr));\
+ (ipv6m) = 0; \
+ for (i = 0; i < sizeof(ipv6_addr); i++) { \
+ if (ipv6_addr[i] == UINT8_MAX) \
+ (ipv6m) |= 1 << i; \
+ else if (ipv6_addr[i] != 0) { \
+ PMD_DRV_LOG(ERR, " invalid IPv6 address mask."); \
+ return -EINVAL; \
+ } \
+ } \
+} while (0)
+
+#define IPV6_MASK_TO_ADDR(ipv6m, ipaddr) do { \
+ uint8_t ipv6_addr[16]; \
+ uint8_t i; \
+ for (i = 0; i < sizeof(ipv6_addr); i++) { \
+ if ((ipv6m) & (1 << i)) \
+ ipv6_addr[i] = UINT8_MAX; \
+ else \
+ ipv6_addr[i] = 0; \
+ } \
+ rte_memcpy((ipaddr), ipv6_addr, sizeof(ipv6_addr));\
+} while (0)
+
+/**
+ * Initialize Flow Director control registers
+ * @hw: pointer to hardware structure
+ * @fdirctrl: value to write to flow director control register
+ **/
+static int
+txgbe_fdir_enable(struct txgbe_hw *hw, uint32_t fdirctrl)
+{
+ int i;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* Prime the keys for hashing */
+ wr32(hw, TXGBE_FDIRBKTHKEY, TXGBE_ATR_BUCKET_HASH_KEY);
+ wr32(hw, TXGBE_FDIRSIGHKEY, TXGBE_ATR_SIGNATURE_HASH_KEY);
+
+ /*
+ * Continue setup of fdirctrl register bits:
+ * Set the maximum length per hash bucket to 0xA filters
+ * Send interrupt when 64 filters are left
+ */
+ fdirctrl |= TXGBE_FDIRCTL_MAXLEN(0xA) |
+ TXGBE_FDIRCTL_FULLTHR(4);
+
+ /*
+ * Poll init-done after we write the register. Estimated times:
+ * 10G: PBALLOC = 11b, timing is 60us
+ * 1G: PBALLOC = 11b, timing is 600us
+ * 100M: PBALLOC = 11b, timing is 6ms
+ *
+ * Multiple these timings by 4 if under full Rx load
+ *
+ * So we'll poll for TXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+ * 1 msec per poll time. If we're at line rate and drop to 100M, then
+ * this might not finish in our poll time, but we can live with that
+ * for now.
+ */
+ wr32(hw, TXGBE_FDIRCTL, fdirctrl);
+ txgbe_flush(hw);
+ for (i = 0; i < TXGBE_FDIR_INIT_DONE_POLL; i++) {
+ if (rd32(hw, TXGBE_FDIRCTL) & TXGBE_FDIRCTL_INITDONE)
+ break;
+ msec_delay(1);
+ }
+
+ if (i >= TXGBE_FDIR_INIT_DONE_POLL) {
+ PMD_INIT_LOG(ERR, "Flow Director poll time exceeded during enabling!");
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/*
+ * Set appropriate bits in fdirctrl for: variable reporting levels, moving
+ * flexbytes matching field, and drop queue (only for perfect matching mode).
+ */
+static inline int
+configure_fdir_flags(const struct rte_fdir_conf *conf,
+ uint32_t *fdirctrl, uint32_t *flex)
+{
+ *fdirctrl = 0;
+ *flex = 0;
+
+ switch (conf->pballoc) {
+ case RTE_FDIR_PBALLOC_64K:
+ /* 8k - 1 signature filters */
+ *fdirctrl |= TXGBE_FDIRCTL_BUF_64K;
+ break;
+ case RTE_FDIR_PBALLOC_128K:
+ /* 16k - 1 signature filters */
+ *fdirctrl |= TXGBE_FDIRCTL_BUF_128K;
+ break;
+ case RTE_FDIR_PBALLOC_256K:
+ /* 32k - 1 signature filters */
+ *fdirctrl |= TXGBE_FDIRCTL_BUF_256K;
+ break;
+ default:
+ /* bad value */
+ PMD_INIT_LOG(ERR, "Invalid fdir_conf->pballoc value");
+ return -EINVAL;
+ };
+
+ /* status flags: write hash & swindex in the rx descriptor */
+ switch (conf->status) {
+ case RTE_FDIR_NO_REPORT_STATUS:
+ /* do nothing, default mode */
+ break;
+ case RTE_FDIR_REPORT_STATUS:
+ /* report status when the packet matches a fdir rule */
+ *fdirctrl |= TXGBE_FDIRCTL_REPORT_MATCH;
+ break;
+ case RTE_FDIR_REPORT_STATUS_ALWAYS:
+ /* always report status */
+ *fdirctrl |= TXGBE_FDIRCTL_REPORT_ALWAYS;
+ break;
+ default:
+ /* bad value */
+ PMD_INIT_LOG(ERR, "Invalid fdir_conf->status value");
+ return -EINVAL;
+ };
+
+ *flex |= TXGBE_FDIRFLEXCFG_BASE_MAC;
+ *flex |= TXGBE_FDIRFLEXCFG_OFST(TXGBE_DEFAULT_FLEXBYTES_OFFSET / 2);
+
+ switch (conf->mode) {
+ case RTE_FDIR_MODE_SIGNATURE:
+ break;
+ case RTE_FDIR_MODE_PERFECT:
+ *fdirctrl |= TXGBE_FDIRCTL_PERFECT;
+ *fdirctrl |= TXGBE_FDIRCTL_DROPQP(conf->drop_queue);
+ break;
+ default:
+ /* bad value */
+ PMD_INIT_LOG(ERR, "Invalid fdir_conf->mode value");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static inline uint32_t
+reverse_fdir_bmks(uint16_t hi_dword, uint16_t lo_dword)
+{
+ uint32_t mask = hi_dword << 16;
+
+ mask |= lo_dword;
+ mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+ mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+ mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+ return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+int
+txgbe_fdir_set_input_mask(struct rte_eth_dev *dev)
+{
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+ struct txgbe_hw_fdir_info *info = TXGBE_DEV_FDIR(dev);
+ enum rte_fdir_mode mode = dev->data->dev_conf.fdir_conf.mode;
+ /*
+ * mask VM pool and DIPv6 since there are currently not supported
+ * mask FLEX byte, it will be set in flex_conf
+ */
+ uint32_t fdirm = TXGBE_FDIRMSK_POOL;
+ uint32_t fdirtcpm; /* TCP source and destination port masks. */
+ uint32_t fdiripv6m; /* IPv6 source and destination masks. */
+
+ PMD_INIT_FUNC_TRACE();
+
+ if (mode != RTE_FDIR_MODE_SIGNATURE &&
+ mode != RTE_FDIR_MODE_PERFECT) {
+ PMD_DRV_LOG(ERR, "Not supported fdir mode - %d!", mode);
+ return -ENOTSUP;
+ }
+
+ /*
+ * Program the relevant mask registers. If src/dst_port or src/dst_addr
+ * are zero, then assume a full mask for that field. Also assume that
+ * a VLAN of 0 is unspecified, so mask that out as well. L4type
+ * cannot be masked out in this implementation.
+ */
+ if (info->mask.dst_port_mask == 0 && info->mask.src_port_mask == 0) {
+ /* use the L4 protocol mask for raw IPv4/IPv6 traffic */
+ fdirm |= TXGBE_FDIRMSK_L4P;
+ }
+
+ /* TBD: don't support encapsulation yet */
+ wr32(hw, TXGBE_FDIRMSK, fdirm);
+
+ /* store the TCP/UDP port masks, bit reversed from port layout */
+ fdirtcpm = reverse_fdir_bmks(rte_be_to_cpu_16(info->mask.dst_port_mask),
+ rte_be_to_cpu_16(info->mask.src_port_mask));
+
+ /* write all the same so that UDP, TCP and SCTP use the same mask
+ * (little-endian)
+ */
+ wr32(hw, TXGBE_FDIRTCPMSK, ~fdirtcpm);
+ wr32(hw, TXGBE_FDIRUDPMSK, ~fdirtcpm);
+ wr32(hw, TXGBE_FDIRSCTPMSK, ~fdirtcpm);
+
+ /* Store source and destination IPv4 masks (big-endian) */
+ wr32(hw, TXGBE_FDIRSIP4MSK, ~info->mask.src_ipv4_mask);
+ wr32(hw, TXGBE_FDIRDIP4MSK, ~info->mask.dst_ipv4_mask);
+
+ if (mode == RTE_FDIR_MODE_SIGNATURE) {
+ /*
+ * Store source and destination IPv6 masks (bit reversed)
+ */
+ fdiripv6m = TXGBE_FDIRIP6MSK_DST(info->mask.dst_ipv6_mask) |
+ TXGBE_FDIRIP6MSK_SRC(info->mask.src_ipv6_mask);
+
+ wr32(hw, TXGBE_FDIRIP6MSK, ~fdiripv6m);
+ }
+
+ return 0;
+}
+
+static int
+txgbe_fdir_store_input_mask(struct rte_eth_dev *dev)
+{
+ struct rte_eth_fdir_masks *input_mask =
+ &dev->data->dev_conf.fdir_conf.mask;
+ enum rte_fdir_mode mode = dev->data->dev_conf.fdir_conf.mode;
+ struct txgbe_hw_fdir_info *info = TXGBE_DEV_FDIR(dev);
+ uint16_t dst_ipv6m = 0;
+ uint16_t src_ipv6m = 0;
+
+ if (mode != RTE_FDIR_MODE_SIGNATURE &&
+ mode != RTE_FDIR_MODE_PERFECT) {
+ PMD_DRV_LOG(ERR, "Not supported fdir mode - %d!", mode);
+ return -ENOTSUP;
+ }
+
+ memset(&info->mask, 0, sizeof(struct txgbe_hw_fdir_mask));
+ info->mask.vlan_tci_mask = input_mask->vlan_tci_mask;
+ info->mask.src_port_mask = input_mask->src_port_mask;
+ info->mask.dst_port_mask = input_mask->dst_port_mask;
+ info->mask.src_ipv4_mask = input_mask->ipv4_mask.src_ip;
+ info->mask.dst_ipv4_mask = input_mask->ipv4_mask.dst_ip;
+ IPV6_ADDR_TO_MASK(input_mask->ipv6_mask.src_ip, src_ipv6m);
+ IPV6_ADDR_TO_MASK(input_mask->ipv6_mask.dst_ip, dst_ipv6m);
+ info->mask.src_ipv6_mask = src_ipv6m;
+ info->mask.dst_ipv6_mask = dst_ipv6m;
+
+ return 0;
+}
+
+int
+txgbe_fdir_set_flexbytes_offset(struct rte_eth_dev *dev,
+ uint16_t offset)
+{
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+ int i;
+
+ for (i = 0; i < 64; i++) {
+ uint32_t flexreg, flex;
+ flexreg = rd32(hw, TXGBE_FDIRFLEXCFG(i / 4));
+ flex = TXGBE_FDIRFLEXCFG_BASE_MAC;
+ flex |= TXGBE_FDIRFLEXCFG_OFST(offset / 2);
+ flexreg &= ~(TXGBE_FDIRFLEXCFG_ALL(~0UL, i % 4));
+ flexreg |= TXGBE_FDIRFLEXCFG_ALL(flex, i % 4);
+ wr32(hw, TXGBE_FDIRFLEXCFG(i / 4), flexreg);
+ }
+
+ txgbe_flush(hw);
+ for (i = 0; i < TXGBE_FDIR_INIT_DONE_POLL; i++) {
+ if (rd32(hw, TXGBE_FDIRCTL) &
+ TXGBE_FDIRCTL_INITDONE)
+ break;
+ msec_delay(1);
+ }
+ return 0;
+}
+
+/*
+ * txgbe_check_fdir_flex_conf -check if the flex payload and mask configuration
+ * arguments are valid
+ */
+static int
+txgbe_set_fdir_flex_conf(struct rte_eth_dev *dev, uint32_t flex)
+{
+ const struct rte_eth_fdir_flex_conf *conf =
+ &dev->data->dev_conf.fdir_conf.flex_conf;
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+ struct txgbe_hw_fdir_info *info = TXGBE_DEV_FDIR(dev);
+ const struct rte_eth_flex_payload_cfg *flex_cfg;
+ const struct rte_eth_fdir_flex_mask *flex_mask;
+ uint16_t flexbytes = 0;
+ uint16_t i;
+
+ if (conf == NULL) {
+ PMD_DRV_LOG(ERR, "NULL pointer.");
+ return -EINVAL;
+ }
+
+ flex |= TXGBE_FDIRFLEXCFG_DIA;
+
+ for (i = 0; i < conf->nb_payloads; i++) {
+ flex_cfg = &conf->flex_set[i];
+ if (flex_cfg->type != RTE_ETH_RAW_PAYLOAD) {
+ PMD_DRV_LOG(ERR, "unsupported payload type.");
+ return -EINVAL;
+ }
+ if (((flex_cfg->src_offset[0] & 0x1) == 0) &&
+ (flex_cfg->src_offset[1] == flex_cfg->src_offset[0] + 1) &&
+ flex_cfg->src_offset[0] <= TXGBE_MAX_FLX_SOURCE_OFF) {
+ flex &= ~TXGBE_FDIRFLEXCFG_OFST_MASK;
+ flex |=
+ TXGBE_FDIRFLEXCFG_OFST(flex_cfg->src_offset[0] / 2);
+ } else {
+ PMD_DRV_LOG(ERR, "invalid flexbytes arguments.");
+ return -EINVAL;
+ }
+ }
+
+ for (i = 0; i < conf->nb_flexmasks; i++) {
+ flex_mask = &conf->flex_mask[i];
+ if (flex_mask->flow_type != RTE_ETH_FLOW_UNKNOWN) {
+ PMD_DRV_LOG(ERR, "flexmask should be set globally.");
+ return -EINVAL;
+ }
+ flexbytes = (uint16_t)(((flex_mask->mask[1] << 8) & 0xFF00) |
+ ((flex_mask->mask[0]) & 0xFF));
+ if (flexbytes == UINT16_MAX) {
+ flex &= ~TXGBE_FDIRFLEXCFG_DIA;
+ } else if (flexbytes != 0) {
+ /* TXGBE_FDIRFLEXCFG_DIA is set by default when set mask */
+ PMD_DRV_LOG(ERR, " invalid flexbytes mask arguments.");
+ return -EINVAL;
+ }
+ }
+
+ info->mask.flex_bytes_mask = flexbytes ? UINT16_MAX : 0;
+ info->flex_bytes_offset = (uint8_t)(TXGBD_FDIRFLEXCFG_OFST(flex) * 2);
+
+ for (i = 0; i < 64; i++) {
+ uint32_t flexreg;
+ flexreg = rd32(hw, TXGBE_FDIRFLEXCFG(i / 4));
+ flexreg &= ~(TXGBE_FDIRFLEXCFG_ALL(~0UL, i % 4));
+ flexreg |= TXGBE_FDIRFLEXCFG_ALL(flex, i % 4);
+ wr32(hw, TXGBE_FDIRFLEXCFG(i / 4), flexreg);
+ }
+ return 0;
+}
+
+int
+txgbe_fdir_configure(struct rte_eth_dev *dev)
+{
+ struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
+ int err;
+ uint32_t fdirctrl, flex, pbsize;
+ int i;
+ enum rte_fdir_mode mode = dev->data->dev_conf.fdir_conf.mode;
+
+ PMD_INIT_FUNC_TRACE();
+
+ /* supports mac-vlan and tunnel mode */
+ if (mode != RTE_FDIR_MODE_SIGNATURE &&
+ mode != RTE_FDIR_MODE_PERFECT)
+ return -ENOSYS;
+
+ err = configure_fdir_flags(&dev->data->dev_conf.fdir_conf,
+ &fdirctrl, &flex);
+ if (err)
+ return err;
+
+ /*
+ * Before enabling Flow Director, the Rx Packet Buffer size
+ * must be reduced. The new value is the current size minus
+ * flow director memory usage size.
+ */
+ pbsize = rd32(hw, TXGBE_PBRXSIZE(0));
+ pbsize -= TXGBD_FDIRCTL_BUF_BYTE(fdirctrl);
+ wr32(hw, TXGBE_PBRXSIZE(0), pbsize);
+
+ /*
+ * The defaults in the HW for RX PB 1-7 are not zero and so should be
+ * initialized to zero for non DCB mode otherwise actual total RX PB
+ * would be bigger than programmed and filter space would run into
+ * the PB 0 region.
+ */
+ for (i = 1; i < 8; i++)
+ wr32(hw, TXGBE_PBRXSIZE(i), 0);
+
+ err = txgbe_fdir_store_input_mask(dev);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, " Error on setting FD mask");
+ return err;
+ }
+
+ err = txgbe_fdir_set_input_mask(dev);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, " Error on setting FD mask");
+ return err;
+ }
+
+ err = txgbe_set_fdir_flex_conf(dev, flex);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, " Error on setting FD flexible arguments.");
+ return err;
+ }
+
+ err = txgbe_fdir_enable(hw, fdirctrl);
+ if (err < 0) {
+ PMD_INIT_LOG(ERR, " Error on enabling FD.");
+ return err;
+ }
+ return 0;
+}
+
--
2.18.2
next prev parent reply other threads:[~2020-12-18 9:39 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-18 9:36 [dpdk-dev] [PATCH v3 00/33] net: add txgbe PMD part 2 Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 01/33] net/txgbe: add generic flow API Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 02/33] net/txgbe: add ntuple filter init and uninit Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 03/33] net/txgbe: support ntuple filter add and delete Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 04/33] net/txgbe: parse n-tuple filter Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 05/33] net/txgbe: support ethertype filter add and delete Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 06/33] net/txgbe: parse ethertype filter Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 07/33] net/txgbe: support syn filter add and delete Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 08/33] net/txgbe: parse syn filter Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 09/33] net/txgbe: add L2 tunnel filter init and uninit Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 10/33] net/txgbe: config L2 tunnel filter with e-tag Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 11/33] net/txgbe: support L2 tunnel filter add and delete Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 12/33] net/txgbe: parse L2 tunnel filter Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 13/33] net/txgbe: add flow director filter init and uninit Jiawen Wu
2020-12-18 9:36 ` Jiawen Wu [this message]
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 15/33] net/txgbe: support flow director filter add and delete Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 16/33] net/txgbe: parse flow director filter Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 17/33] net/txgbe: restore RSS filter Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 18/33] net/txgbe: parse " Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 19/33] net/txgbe: support to create consistent filter Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 20/33] net/txgbe: support to destroy " Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 21/33] net/txgbe: flush all the filters Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 22/33] net/txgbe: support UDP tunnel port add and delete Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 23/33] net/txgbe: add TM configuration init and uninit Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 24/33] net/txgbe: add TM capabilities get operation Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 25/33] net/txgbe: support TM shaper profile add and delete Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 26/33] net/txgbe: support TM node " Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 27/33] net/txgbe: add TM hierarchy commit Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 28/33] net/txgbe: support to add traffic mirror rules Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 29/33] net/txgbe: add IPsec context creation Jiawen Wu
2020-12-18 9:36 ` [dpdk-dev] [PATCH v3 30/33] net/txgbe: add security session create operation Jiawen Wu
2020-12-18 9:37 ` [dpdk-dev] [PATCH v3 31/33] net/txgbe: destroy security session Jiawen Wu
2020-12-18 9:37 ` [dpdk-dev] [PATCH v3 32/33] net/txgbe: add security offload in Rx and Tx process Jiawen Wu
2020-12-18 9:37 ` [dpdk-dev] [PATCH v3 33/33] net/txgbe: add security type in flow action Jiawen Wu
2021-01-13 6:15 ` [dpdk-dev] [PATCH v3 00/33] net: add txgbe PMD part 2 Jiawen Wu
2021-01-13 13:15 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201218093702.3651867-15-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).