DPDK patches and discussions
 help / color / mirror / Atom feed
From: Feifei Wang <feifei.wang2@arm.com>
To: Harry van Haaren <harry.van.haaren@intel.com>,
	Nikhil Rao <nikhil.rao@intel.com>,
	Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Cc: dev@dpdk.org, nd@arm.com, Feifei Wang <feifei.wang2@arm.com>,
	pbhagavatula@marvell.com, stable@dpdk.org
Subject: [dpdk-dev] [PATCH] examples/eventdev: move eth stop to the end
Date: Mon, 21 Dec 2020 13:34:54 +0800
Message-ID: <20201221053454.47307-1-feifei.wang2@arm.com> (raw)

Move eth stop code from "signal_handler" function to the end of "main"
function. There are two reasons for this:

First, this improves code maintenance and makes code look simple and clear.
Based on this change, after receiving the interrupt signal, "fdata->done"
is set as 1. Then the main thread will wait all worker lcores to jump out
of the loop. Finally, the main thread will stop and then close eth dev port.

Second, for older version, the main thread first stops eth dev port and then
waits the end of worker lcore. This may cause errors because it may stop the
eth dev port which worker lcores are using. This moving change can fix this
by waiting all worker threads to exit and then stop the eth dev port.

In the meanwhile, remove wmb in signal_handler.

This is because when the main lcore receive the stop signal, it stores 1
into fdata->done. And then the worker lcores load "fdata->done" and jump out
of the loop to stop running. Nothing should be stored after updating
fdata->done, so the wmb is unnecessary.

Fixes: 085edac2ca38 ("examples/eventdev_pipeline: support Tx adapter")
Cc: pbhagavatula@marvell.com
Cc: stable@dpdk.org

Suggested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
---
 examples/eventdev_pipeline/main.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/examples/eventdev_pipeline/main.c b/examples/eventdev_pipeline/main.c
index 823f8b51c..ac2ace5c4 100644
--- a/examples/eventdev_pipeline/main.c
+++ b/examples/eventdev_pipeline/main.c
@@ -291,17 +291,6 @@ signal_handler(int signum)
 			rte_event_dev_dump(0, stdout);
 		once = 1;
 		fdata->done = 1;
-		rte_smp_wmb();
-
-		RTE_ETH_FOREACH_DEV(portid) {
-			rte_event_eth_rx_adapter_stop(portid);
-			rte_event_eth_tx_adapter_stop(portid);
-			if (rte_eth_dev_stop(portid) < 0)
-				printf("Failed to stop port %u", portid);
-		}
-
-		rte_eal_mp_wait_lcore();
-
 	}
 	if (signum == SIGTSTP)
 		rte_event_dev_dump(0, stdout);
@@ -465,6 +454,10 @@ main(int argc, char **argv)
 	}
 
 	RTE_ETH_FOREACH_DEV(portid) {
+		rte_event_eth_rx_adapter_stop(portid);
+		rte_event_eth_tx_adapter_stop(portid);
+		if (rte_eth_dev_stop(portid) < 0)
+			printf("Failed to stop port %u", portid);
 		rte_eth_dev_close(portid);
 	}
 
-- 
2.17.1


             reply	other threads:[~2020-12-21  5:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-21  5:34 Feifei Wang [this message]
2020-12-21  9:32 ` [dpdk-dev] [PATCH v2] " Feifei Wang
2020-12-21  9:56 ` [dpdk-dev] [PATCH] " Van Haaren, Harry
2020-12-22  5:31   ` [dpdk-dev] 回复: " Feifei Wang
2021-01-05  5:14 ` [dpdk-dev] [PATCH v3] examples/eventdev: refactor ethdev port stop Feifei Wang
2021-01-05 10:09   ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2021-01-14  6:24     ` [dpdk-dev] 回复: " Feifei Wang
2021-01-14  8:50       ` Feifei Wang
2021-01-14 10:30 ` [dpdk-dev] [PATCH v4 0/3] fix bugs for examples/evnentdev Feifei Wang
2021-01-14 10:30   ` [dpdk-dev] [PATCH v4 1/3] doc: fix core enabled bug for eventdev pipeline example Feifei Wang
2021-01-14 10:31   ` [dpdk-dev] [PATCH v4 2/3] examples/eventdev: add info output for main core Feifei Wang
2021-01-14 10:31   ` [dpdk-dev] [PATCH v4 3/3] examples/eventdev: move eth stop to the end Feifei Wang
2021-01-25 17:51     ` [dpdk-dev] [EXT] " Pavan Nikhilesh Bhagavatula
2021-01-26 13:37       ` Jerin Jacob

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201221053454.47307-1-feifei.wang2@arm.com \
    --to=feifei.wang2@arm.com \
    --cc=dev@dpdk.org \
    --cc=harry.van.haaren@intel.com \
    --cc=nd@arm.com \
    --cc=nikhil.rao@intel.com \
    --cc=pbhagavatula@caviumnetworks.com \
    --cc=pbhagavatula@marvell.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git