DPDK patches and discussions
 help / color / mirror / Atom feed
From: Tal Shnaiderman <talshn@nvidia.com>
To: dev@dpdk.org
Cc: thomas@monjalon.net, matan@nvidia.com, rasland@nvidia.com,
	ophirmu@nvidia.com, Dekel Peled <dekelp@nvidia.com>
Subject: [dpdk-dev] [PATCH v2 24/35] net/mlx5/windows: introduce flow support
Date: Mon, 28 Dec 2020 14:32:51 +0200
Message-ID: <20201228123302.3608-25-talshn@nvidia.com> (raw)
In-Reply-To: <20201228123302.3608-1-talshn@nvidia.com>

From: Ophir Munk <ophirmu@nvidia.com>

This patch adds the initial flow framework under Windows OS. It supports
a subset of filters (ETH, IPV4, UDP) and a QUEUE action.  It is based on
DevX mechanism to send commands to the NIC through the kernel. It does
not support steering rules (i.e. writing directly to the NIC memory).
The Windows framework uses the existing DV framework where file
mlx5_flow_dv.c remains intact.

Steps involved in flow creation:
1. Create a domain (RX, TX, FDB). Since domains are created by steering
rules and not with DevX, Windows does not require a domain object (this
means switch dev mode which requires an FDB domain is not supported).
2. Create a table object. Windows only supports table 0. The call to
mlx5_flow_os_create_flow_tbl() silently returns successfully.
3. Create a matcher object. A matcher struct is created by calling
mlx5_flow_os_create_flow_matcher().  The matcher validation and
translation are part of the DV implementation. The matcher bits that
were created by DV in standard PRM format are copied into the matcher
struct.
4. Create an action object. The call to
mlx5_flow_os_create_flow_action_dest_devx_tir() creates an action struct
with the TIR type and id.  This struct will be a parameter later in a
call to flow creation.  All other action calls (e.g. packet reformat,
header modification, jump to flow table, etc) return with a non
supported error.
5. Create the flow. The call to mlx5_flow_os_create_flow() receives the
matcher struct, action struct, and copy them into Windows specific
fs_rule struct, then it calls glue API devx_fs_rule_add().

Details on additional APIs:
* mlx5_flow_os_get_type() is called during flow type selection. In
Windows it constantly returns MLX5_FLOW_TYPE_DV.
* mlx5_flow_os_item_supported() is called before starting DV items
validation or translation. It filters out the OS non supported items in
advance.
* mlx5_flow_os_action_supported() is called before starting DV actions
validation or translation. It filters out the OS non supported actions
in advance.
* mlx5_flow_adjust_priority() is an OS stub for flow priority
adjustment. Windows only supports flow priority 0.
* Alarm API: mlx5_os_alarm_cancel() and mlx5_os_alarm_set() are
implemented in Windows to match their Linux counterpart, see [1].
Currently they return -ENOTSUP.

[1]
("net/mlx5/linux: wrap rte alarm API with mlx5")

Signed-off-by: Ophir Munk <ophirmu@nvidia.com>
Signed-off-by: Dekel Peled <dekelp@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
---
 drivers/common/mlx5/windows/mlx5_win_defs.h |   7 +
 drivers/net/mlx5/windows/meson.build        |   1 +
 drivers/net/mlx5/windows/mlx5_flow_os.c     | 188 ++++++++++++++
 drivers/net/mlx5/windows/mlx5_flow_os.h     | 363 ++++++++++++++++++++++++++++
 4 files changed, 559 insertions(+)
 create mode 100644 drivers/net/mlx5/windows/mlx5_flow_os.c
 create mode 100644 drivers/net/mlx5/windows/mlx5_flow_os.h

diff --git a/drivers/common/mlx5/windows/mlx5_win_defs.h b/drivers/common/mlx5/windows/mlx5_win_defs.h
index d8f20993e0..27dcf40819 100644
--- a/drivers/common/mlx5/windows/mlx5_win_defs.h
+++ b/drivers/common/mlx5/windows/mlx5_win_defs.h
@@ -169,4 +169,11 @@ struct mlx5_wqe_data_seg {
 #define IBV_RAW_PACKET_CAP_CVLAN_STRIPPING	(1 << 0)
 #define IBV_RAW_PACKET_CAP_SCATTER_FCS		(1 << 1)
 #define IBV_QPT_RAW_PACKET			8
+
+enum {
+	MLX5_FLOW_CONTEXT_DEST_TYPE_VPORT                    = 0x0,
+	MLX5_FLOW_CONTEXT_DEST_TYPE_FLOW_TABLE               = 0x1,
+	MLX5_FLOW_CONTEXT_DEST_TYPE_TIR                      = 0x2,
+	MLX5_FLOW_CONTEXT_DEST_TYPE_QP                       = 0x3,
+};
 #endif /* __MLX5_WIN_DEFS_H__ */
diff --git a/drivers/net/mlx5/windows/meson.build b/drivers/net/mlx5/windows/meson.build
index 87e34d3cda..8404dc1247 100644
--- a/drivers/net/mlx5/windows/meson.build
+++ b/drivers/net/mlx5/windows/meson.build
@@ -7,5 +7,6 @@ sources += files(
 	'mlx5_mp_os.c',
 	'mlx5_ethdev_os.c',
 	'mlx5_vlan_os.c',
+	'mlx5_flow_os.c',
 )
 
diff --git a/drivers/net/mlx5/windows/mlx5_flow_os.c b/drivers/net/mlx5/windows/mlx5_flow_os.c
new file mode 100644
index 0000000000..8c504fc69c
--- /dev/null
+++ b/drivers/net/mlx5/windows/mlx5_flow_os.c
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+
+#include "mlx5_flow_os.h"
+#include "mlx5_win_ext.h"
+
+/**
+ * Verify the @p attributes will be correctly understood by the NIC and store
+ * them in the @p flow if everything is correct.
+ *
+ * @param[in] dev
+ *   Pointer to dev struct.
+ * @param[in] attributes
+ *   Pointer to flow attributes
+ * @param[in] external
+ *   This flow rule is created by request external to PMD.
+ * @param[out] error
+ *   Pointer to error structure.
+ *
+ * @return
+ *   - 0 on success and non root table (not a valid option for Windows yet).
+ *   - 1 on success and root table.
+ *   - a negative errno value otherwise and rte_errno is set.
+ */
+int
+mlx5_flow_os_validate_flow_attributes(struct rte_eth_dev *dev,
+				      const struct rte_flow_attr *attributes,
+				      bool external,
+				      struct rte_flow_error *error)
+{
+	int ret = 1;
+
+	RTE_SET_USED(dev);
+	RTE_SET_USED(external);
+	if (attributes->group)
+		return rte_flow_error_set(error, ENOTSUP,
+					  RTE_FLOW_ERROR_TYPE_ATTR_GROUP,
+					  NULL,
+					  "groups are not supported");
+	if (attributes->priority)
+		return rte_flow_error_set(error, ENOTSUP,
+					  RTE_FLOW_ERROR_TYPE_ATTR_PRIORITY,
+					  NULL,
+					  "priorities are not supported");
+	if (attributes->transfer)
+		return rte_flow_error_set(error, ENOTSUP,
+					  RTE_FLOW_ERROR_TYPE_ATTR_TRANSFER,
+					  NULL,
+					  "transfer not supported");
+	if (!(attributes->ingress))
+		return rte_flow_error_set(error, ENOTSUP,
+					  RTE_FLOW_ERROR_TYPE_ATTR_INGRESS,
+					  NULL, "must specify ingress only");
+	return ret;
+}
+
+/**
+ * Create flow matcher in a flow table.
+ *
+ * @param[in] ctx
+ *   Pointer to relevant device context.
+ * @param[in] attr
+ *   Pointer to relevant attributes.
+ * @param[in] table
+ *   Pointer to table object.
+ * @param[out] matcher
+ *   Pointer to a valid flow matcher object on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or errno on failure.
+ */
+int
+mlx5_flow_os_create_flow_matcher(void *ctx,
+				 void *attr,
+				 void *table,
+				 void **matcher)
+{
+	RTE_SET_USED(ctx);
+	RTE_SET_USED(attr);
+	RTE_SET_USED(table);
+	*matcher = NULL;
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Destroy flow matcher.
+ *
+ * @param[in] matcher
+ *   Pointer to matcher object to destroy.
+ *
+ * @return
+ *   0 on success, or the value of errno on failure.
+ */
+int
+mlx5_flow_os_destroy_flow_matcher(void *matcher)
+{
+	RTE_SET_USED(matcher);
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: dest_devx_tir
+ *
+ * @param[in] tir
+ *   Pointer to DevX tir object
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or errno on failure.
+ */
+int
+mlx5_flow_os_create_flow_action_dest_devx_tir(struct mlx5_devx_obj *tir,
+					      void **action)
+{
+	RTE_SET_USED(tir);
+	*action = NULL;
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Destroy flow action.
+ *
+ * @param[in] action
+ *   Pointer to action object to destroy.
+ *
+ * @return
+ *   0 on success, or the value of errno on failure.
+ */
+int
+mlx5_flow_os_destroy_flow_action(void *action)
+{
+	RTE_SET_USED(action);
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow rule.
+ *
+ * @param[in] matcher
+ *   Pointer to match mask structure.
+ * @param[in] match_value
+ *   Pointer to match value structure.
+ * @param[in] num_actions
+ *   Number of actions in flow rule.
+ * @param[in] actions
+ *   Pointer to array of flow rule actions.
+ * @param[out] flow
+ *   Pointer to a valid flow rule object on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or errno on failure.
+ */
+int
+mlx5_flow_os_create_flow(void *matcher, void *match_value,
+			 size_t num_actions,
+			 void *actions[], void **flow)
+{
+	RTE_SET_USED(matcher);
+	RTE_SET_USED(match_value);
+	RTE_SET_USED(num_actions);
+	RTE_SET_USED(actions);
+	*flow = NULL;
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Destroy flow rule.
+ *
+ * @param[in] drv_flow_ptr
+ *   Pointer to flow rule object.
+ *
+ * @return
+ *   0 on success, errno on failure.
+ */
+int
+mlx5_flow_os_destroy_flow(void *drv_flow_ptr)
+{
+	RTE_SET_USED(dev_flow_ptr);
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
diff --git a/drivers/net/mlx5/windows/mlx5_flow_os.h b/drivers/net/mlx5/windows/mlx5_flow_os.h
new file mode 100644
index 0000000000..1e762c17dc
--- /dev/null
+++ b/drivers/net/mlx5/windows/mlx5_flow_os.h
@@ -0,0 +1,363 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright 2020 Mellanox Technologies, Ltd
+ */
+
+#ifndef RTE_PMD_MLX5_FLOW_OS_H_
+#define RTE_PMD_MLX5_FLOW_OS_H_
+
+#include "mlx5_flow.h"
+
+#if defined(HAVE_IBV_FLOW_DV_SUPPORT) || !defined(HAVE_INFINIBAND_VERBS_H)
+extern const struct mlx5_flow_driver_ops mlx5_flow_dv_drv_ops;
+#endif
+
+/**
+ * Get OS enforced flow type. MLX5_FLOW_TYPE_MAX means "non enforced type".
+ *
+ * @return
+ *   Flow type (MLX5_FLOW_TYPE_MAX)
+ */
+static inline enum mlx5_flow_drv_type
+mlx5_flow_os_get_type(void)
+{
+	return MLX5_FLOW_TYPE_DV;
+}
+
+/**
+ * Check if item type is supported.
+ *
+ * @param item
+ *   Item type to check.
+ *
+ * @return
+ *   True is this item type is supported, false if not supported.
+ */
+static inline bool
+mlx5_flow_os_item_supported(int item)
+{
+	switch (item) {
+	case RTE_FLOW_ITEM_TYPE_END:
+	case RTE_FLOW_ITEM_TYPE_VOID:
+	case RTE_FLOW_ITEM_TYPE_ETH:
+	case RTE_FLOW_ITEM_TYPE_IPV4:
+	case RTE_FLOW_ITEM_TYPE_UDP:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/**
+ * Check if action type is supported.
+ *
+ * @param action
+ *   Action type to check.
+ *
+ * @return
+ *   True is this action type is supported, false if not supported.
+ */
+static inline bool
+mlx5_flow_os_action_supported(int action)
+{
+	switch (action) {
+	case RTE_FLOW_ACTION_TYPE_END:
+	case RTE_FLOW_ACTION_TYPE_VOID:
+	case RTE_FLOW_ACTION_TYPE_QUEUE:
+	case RTE_FLOW_ACTION_TYPE_RSS:
+		return true;
+	default:
+		return false;
+	}
+}
+
+/**
+ * Create flow table.
+ *
+ * @param[in] domain
+ *   Pointer to relevant domain.
+ * @param[in] table_id
+ *   Table ID.
+ * @param[out] table
+ *   NULL (no table object required)
+ *
+ * @return
+ *   0 if table_id is 0, negative value otherwise and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_tbl(void *domain, uint32_t table_id, void **table)
+{
+	RTE_SET_USED(domain);
+	*table = NULL;
+	if (table_id) {
+		rte_errno = ENOTSUP;
+		return -rte_errno;
+	}
+	return 0;
+}
+
+/**
+ * Destroy flow table.
+ *
+ * @param table
+ *   Pointer to table to destroy.
+ *
+ * @return
+ *   0 on success (silently ignored).
+ */
+static inline int
+mlx5_flow_os_destroy_flow_tbl(void *table)
+{
+	RTE_SET_USED(table);
+	/* Silently ignore */
+	return 0;
+}
+
+/**
+ * Create flow action: packet reformat.
+ *
+ * @param[in] ctx
+ *   Pointer to relevant device context.
+ * @param[in] domain
+ *   Pointer to domain handler.
+ * @param[in] resource
+ *   Pointer to action data resource.
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ *
+ * @return
+ *   0 on success, or negative value on failure and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_packet_reformat(void *ctx, void *domain,
+						void *resource, void **action)
+{
+	RTE_SET_USED(ctx);
+	RTE_SET_USED(domain);
+	RTE_SET_USED(resource);
+	RTE_SET_USED(action);
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: modify header.
+ *
+ * @param[in] ctx
+ *   Pointer to relevant device context.
+ * @param[in] domain
+ *   Pointer to domain handler.
+ * @param[in] resource
+ *   Pointer to action data resource.
+ * @param[in] actions_len
+ *   Total length of actions data in resource.
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ *
+ * @return
+ *   0 on success, or -1 on failure and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_modify_header(void *ctx,
+					      void *domain,
+					      void *resource,
+					      uint32_t actions_len,
+					      void **action)
+{
+	RTE_SET_USED(ctx);
+	RTE_SET_USED(domain);
+	RTE_SET_USED(resource);
+	RTE_SET_USED(actions_len);
+	RTE_SET_USED(action);
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: destination flow table.
+ *
+ * @param[in] tbl_obj
+ *   Pointer to destination table object.
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or negative value on failure and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_dest_flow_tbl(void *tbl_obj, void **action)
+{
+	RTE_SET_USED(tbl_obj);
+	RTE_SET_USED(action);
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: destination port.
+ *
+ * @param[in] domain
+ *   Pointer to domain handler.
+ * @param[in] port_id
+ *   Destination port ID.
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or negative value on failure and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_dest_port(void *domain, uint32_t port_id,
+					  void **action)
+{
+	RTE_SET_USED(domain);
+	RTE_SET_USED(port_id);
+	*action = NULL;
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: push vlan.
+ *
+ * @param[in] domain
+ *   Pointer to domain handler.
+ * @param[in] vlan_tag
+ *   VLAN tag value.
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or negative value on failure and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_push_vlan(void *domain, rte_be32_t vlan_tag,
+					  void **action)
+{
+	RTE_SET_USED(domain);
+	RTE_SET_USED(vlan_tag);
+	*action = NULL;
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: count.
+ *
+ * @param[in] cnt_obj
+ *   Pointer to DevX counter object.
+ * @param[in] offset
+ *   Offset of counter in array.
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or negative value on failure and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_count(void *cnt_obj, uint16_t offset,
+				      void **action)
+{
+	RTE_SET_USED(cnt_obj);
+	RTE_SET_USED(offset);
+	*action = NULL;
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: tag.
+ *
+ * @param[in] tag
+ *   Tag value.
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or negative value on failure and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_tag(uint32_t tag, void **action)
+{
+	RTE_SET_USED(tag);
+	*action = NULL;
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: drop.
+ *
+ * @param[out] action
+ *   Pointer to a valid action on success, NULL otherwise.
+ *
+ * @return
+ *   0 on success, or negative value on failure and errno is set.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_drop(void **action)
+{
+	*action = NULL;
+	rte_errno = ENOTSUP;
+	return -rte_errno;
+}
+
+/**
+ * Create flow action: default miss.
+ *
+ * @param[out] action
+ *   NULL action pointer.
+ *
+ * @return
+ *   0 as success.
+ */
+static inline int
+mlx5_flow_os_create_flow_action_default_miss(void **action)
+{
+	*action = 0;
+	/* Silently ignore */
+	return 0;
+}
+
+/**
+ * OS stub for mlx5_flow_adjust_priority() API.
+ * Windows only supports flow priority 0 that cannot be adjusted.
+ *
+ * @param[in] dev
+ *    Pointer to the Ethernet device structure.
+ * @param[in] priority
+ *    The rule base priority.
+ * @param[in] subpriority
+ *    The priority based on the items.
+ *
+ * @return
+ *    0
+ */
+static inline uint32_t
+mlx5_os_flow_adjust_priority(struct rte_eth_dev *dev, int32_t priority,
+			  uint32_t subpriority)
+{
+	RTE_SET_USED(dev);
+	RTE_SET_USED(priority);
+	RTE_SET_USED(subpriority);
+	return 0;
+}
+
+int mlx5_flow_os_validate_flow_attributes(struct rte_eth_dev *dev,
+					const struct rte_flow_attr *attributes,
+					bool external,
+					struct rte_flow_error *error);
+int mlx5_flow_os_create_flow_matcher(void *ctx,
+				     void *attr,
+				     void *table,
+				     void **matcher);
+int mlx5_flow_os_destroy_flow_matcher(void *matcher);
+int mlx5_flow_os_create_flow_action_dest_devx_tir(struct mlx5_devx_obj *tir,
+						  void **action);
+int mlx5_flow_os_destroy_flow_action(void *action);
+int mlx5_flow_os_create_flow(void *matcher, void *match_value,
+			     size_t num_actions,
+			     void *actions[], void **flow);
+int mlx5_flow_os_destroy_flow(void *drv_flow_ptr);
+#endif /* RTE_PMD_MLX5_FLOW_OS_H_ */
-- 
2.16.1.windows.4


  parent reply	other threads:[~2020-12-28 12:43 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-17 17:30 [dpdk-dev] [PATCH 00/35] mlx5 Windows support - part #6 Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 01/35] common/mlx5/windows: add missing DV and IBV definitions Tal Shnaiderman
2020-12-28 12:32   ` [dpdk-dev] [PATCH v2 00/35] mlx5 Windows support - part #6 Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 01/35] common/mlx5/windows: add missing DV and IBV definitions Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 02/35] mlx5/windows: add mlx5 macros for fs name and path Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 03/35] common/mlx5: add rte compatibility header file Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 04/35] common/mlx5/windows: add DevX UAR getters Tal Shnaiderman
2021-01-08 12:08       ` Ferruh Yigit
2021-01-08 16:08         ` Ophir Munk
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 05/35] common/mlx5/windows: wrap event channel APIs with OS calls Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 06/35] net/mlx5/windows: add memory region callbacks Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 07/35] net/mlx5/windows: add stubs for MP requests Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 08/35] net/mlx5/windows: support get mac Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 09/35] net/mlx5/windows: add ethdev stub operations Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 10/35] net/mlx5/windows: support link update Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 11/35] net/mlx5/windows: support read clock Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 12/35] net/mlx5/windows: support get mtu Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 13/35] net/mlx5/windows: support get interface name Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 14/35] net/mlx5/windows: support device removed query Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 15/35] net/mlx5/windws: add VLAN stubs Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 16/35] net/mlx5/windows: support get pdn Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 17/35] net/mlx5/windows: support open device Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 18/35] net/mlx5/windows: initial probing implementation Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 19/35] net/mlx5/windws: spawn eth devices Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 20/35] net/mlx5/windows: support VF PCI address Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 21/35] net/mlx5/linux: wrap adjust flow priority with OS calls Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 22/35] net/mlx5/linux: add OS default miss flow action Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 23/35] net/mlx5/linux: fix add OS dest_devx_tir action Tal Shnaiderman
2020-12-28 12:32     ` Tal Shnaiderman [this message]
2021-01-08 14:38       ` [dpdk-dev] [PATCH v2 24/35] net/mlx5/windows: introduce flow support Ferruh Yigit
2021-01-08 14:55         ` Thomas Monjalon
2021-01-08 16:15           ` Ophir Munk
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 25/35] net/mlx5/windows: create flow matcher object Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 26/35] net/mlx5/windows: create flow action dest TIR object Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 27/35] net/mlx5/windows: create flow rule Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 28/35] net/mlx5: use HAVE_INFINIBAND_VERBS_H in shared code Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 29/35] net/mlx5: fix separating eth_dev_ops per OS Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 30/35] net/mlx5: define MLX5_NAMESIZE for device interface size Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 31/35] net/mlx5: use OS independent code in ASO feature Tal Shnaiderman
2020-12-28 12:32     ` [dpdk-dev] [PATCH v2 32/35] mlx5: use init function for ctx list mutex Tal Shnaiderman
2020-12-28 12:33     ` [dpdk-dev] [PATCH v2 33/35] mlx5: use OS function for dr_sync_domain Tal Shnaiderman
2020-12-28 12:33     ` [dpdk-dev] [PATCH v2 34/35] mlx5: do not fail on IPv6 broadcast flow creation failure Tal Shnaiderman
2020-12-28 12:33     ` [dpdk-dev] [PATCH v2 35/35] net/mlx5: fix warnings on comparison sign mismatch Tal Shnaiderman
2021-01-03  2:05     ` [dpdk-dev] [PATCH v2 00/35] mlx5 Windows support - part #6 Raslan Darawsheh
2020-12-17 17:30 ` [dpdk-dev] [PATCH 02/35] mlx5/windows: add mlx5 macros for fs name and path Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 03/35] common/mlx5: add rte compatibility header file Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 04/35] common/mlx5/windows: add DevX UAR getters Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 05/35] common/mlx5/windows: wrap event channel APIs with OS calls Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 06/35] net/mlx5/windows: add memory region callbacks Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 07/35] net/mlx5/windows: add stubs for MP requests Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 08/35] net/mlx5/windows: support get mac Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 09/35] net/mlx5/windows: add ethdev stub operations Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 10/35] net/mlx5/windows: support link update Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 11/35] net/mlx5/windows: support read clock Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 12/35] net/mlx5/windows: support get mtu Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 13/35] net/mlx5/windows: support get interface name Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 14/35] net/mlx5/windows: support device removed query Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 15/35] net/mlx5/windws: add VLAN stubs Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 16/35] net/mlx5/windows: support get pdn Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 17/35] net/mlx5/windows: support open device Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 18/35] net/mlx5/windows: initial probing implementation Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 19/35] net/mlx5/windws: spawn eth devices Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 20/35] net/mlx5/windows: support VF PCI address Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 21/35] net/mlx5/linux: wrap adjust flow priority with OS calls Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 22/35] net/mlx5/linux: add OS default miss flow action Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 23/35] net/mlx5/linux: fix add OS dest_devx_tir action Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 24/35] net/mlx5/windows: introduce flow support Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 25/35] net/mlx5/windows: create flow matcher object Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 26/35] net/mlx5/windows: create flow action dest TIR object Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 27/35] net/mlx5/windows: create flow rule Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 28/35] net/mlx5: use HAVE_INFINIBAND_VERBS_H in shared code Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 29/35] net/mlx5: fix separating eth_dev_ops per OS Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 30/35] net/mlx5: define MLX5_NAMESIZE for device interface size Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 31/35] net/mlx5: use OS independent code in ASO feature Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 32/35] mlx5: use init function for ctx list mutex Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 33/35] mlx5: use OS function for dr_sync_domain Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 34/35] mlx5: do not fail on IPv6 broadcast flow creation failure Tal Shnaiderman
2020-12-17 17:30 ` [dpdk-dev] [PATCH 35/35] net/mlx5: fix warnings on comparison sign mismatch Tal Shnaiderman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201228123302.3608-25-talshn@nvidia.com \
    --to=talshn@nvidia.com \
    --cc=dekelp@nvidia.com \
    --cc=dev@dpdk.org \
    --cc=matan@nvidia.com \
    --cc=ophirmu@nvidia.com \
    --cc=rasland@nvidia.com \
    --cc=thomas@monjalon.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git