From: Maxime Coquelin <maxime.coquelin@redhat.com>
To: dev@dpdk.org, chenbo.xia@intel.com, olivier.matz@6wind.com,
amorenoz@redhat.com, david.marchand@redhat.com
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Subject: [dpdk-dev] [PATCH v3 04/44] net/virtio: introduce Virtio bus type
Date: Mon, 25 Jan 2021 18:14:04 +0100 [thread overview]
Message-ID: <20210125171444.167241-5-maxime.coquelin@redhat.com> (raw)
In-Reply-To: <20210125171444.167241-1-maxime.coquelin@redhat.com>
This patch is preliminary work for introducing a bus layer
in Virtio PMD, in order to improve Virtio-user integration.
A new bus type is added to provide a unified way to distinguish
which bus type is used (PCI modern, PCI legacy or Virtio-user).
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
---
drivers/net/virtio/virtio_ethdev.c | 40 +++++++++++++------------
drivers/net/virtio/virtio_pci.c | 4 +--
drivers/net/virtio/virtio_pci.h | 9 +++++-
drivers/net/virtio/virtio_user_ethdev.c | 2 +-
4 files changed, 32 insertions(+), 23 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index 92a3d4efa5..0ba10c274a 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -592,9 +592,9 @@ virtio_init_queue(struct rte_eth_dev *dev, uint16_t vtpci_queue_idx)
* we use virtual address. And we need properly set _offset_, please see
* VIRTIO_MBUF_DATA_DMA_ADDR in virtqueue.h for more information.
*/
- if (!hw->virtio_user_dev)
+ if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY || hw->bus_type == VIRTIO_BUS_PCI_MODERN) {
vq->offset = offsetof(struct rte_mbuf, buf_iova);
- else {
+ } else if (hw->bus_type == VIRTIO_BUS_USER) {
vq->vq_ring_mem = (uintptr_t)mz->addr;
vq->offset = offsetof(struct rte_mbuf, buf_addr);
if (queue_type == VTNET_TQ)
@@ -746,13 +746,13 @@ virtio_dev_close(struct rte_eth_dev *dev)
virtio_free_queues(hw);
#ifdef RTE_VIRTIO_USER
- if (hw->virtio_user_dev)
+ if (hw->bus_type == VIRTIO_BUS_USER)
virtio_user_dev_uninit(hw->virtio_user_dev);
else
#endif
if (dev->device) {
rte_pci_unmap_device(RTE_ETH_DEV_TO_PCI(dev));
- if (!hw->modern)
+ if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY)
rte_pci_ioport_unmap(VTPCI_IO(hw));
}
@@ -1299,7 +1299,7 @@ virtio_intr_unmask(struct rte_eth_dev *dev)
if (rte_intr_ack(dev->intr_handle) < 0)
return -1;
- if (!hw->virtio_user_dev)
+ if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY || hw->bus_type == VIRTIO_BUS_PCI_MODERN)
hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
return 0;
@@ -1313,7 +1313,7 @@ virtio_intr_enable(struct rte_eth_dev *dev)
if (rte_intr_enable(dev->intr_handle) < 0)
return -1;
- if (!hw->virtio_user_dev)
+ if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY || hw->bus_type == VIRTIO_BUS_PCI_MODERN)
hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
return 0;
@@ -1327,7 +1327,7 @@ virtio_intr_disable(struct rte_eth_dev *dev)
if (rte_intr_disable(dev->intr_handle) < 0)
return -1;
- if (!hw->virtio_user_dev)
+ if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY || hw->bus_type == VIRTIO_BUS_PCI_MODERN)
hw->use_msix = vtpci_msix_detect(RTE_ETH_DEV_TO_PCI(dev));
return 0;
@@ -1368,13 +1368,13 @@ virtio_negotiate_features(struct virtio_hw *hw, uint64_t req_features)
PMD_INIT_LOG(DEBUG, "features after negotiate = %" PRIx64,
hw->guest_features);
- if (hw->modern && !vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) {
+ if (hw->bus_type == VIRTIO_BUS_PCI_MODERN && !vtpci_with_feature(hw, VIRTIO_F_VERSION_1)) {
PMD_INIT_LOG(ERR,
"VIRTIO_F_VERSION_1 features is not enabled.");
return -1;
}
- if (hw->modern || hw->virtio_user_dev) {
+ if (hw->bus_type == VIRTIO_BUS_PCI_MODERN || hw->bus_type == VIRTIO_BUS_USER) {
vtpci_set_status(hw, VIRTIO_CONFIG_STATUS_FEATURES_OK);
if (!(vtpci_get_status(hw) & VIRTIO_CONFIG_STATUS_FEATURES_OK)) {
PMD_INIT_LOG(ERR,
@@ -1709,7 +1709,7 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
hw->weak_barriers = !vtpci_with_feature(hw, VIRTIO_F_ORDER_PLATFORM);
- if (!hw->virtio_user_dev)
+ if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY || hw->bus_type == VIRTIO_BUS_PCI_MODERN)
pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
/* If host does not support both status and MSI-X then disable LSC */
@@ -1856,7 +1856,7 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features)
static int
virtio_remap_pci(struct rte_pci_device *pci_dev, struct virtio_hw *hw)
{
- if (hw->modern) {
+ if (hw->bus_type == VIRTIO_BUS_PCI_MODERN) {
/*
* We don't have to re-parse the PCI config space, since
* rte_pci_map_device() makes sure the mapped address
@@ -1872,7 +1872,7 @@ virtio_remap_pci(struct rte_pci_device *pci_dev, struct virtio_hw *hw)
PMD_INIT_LOG(DEBUG, "failed to map pci device!");
return -1;
}
- } else {
+ } else if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY) {
if (rte_pci_ioport_map(pci_dev, 0, VTPCI_IO(hw)) < 0)
return -1;
}
@@ -1884,14 +1884,16 @@ static void
virtio_set_vtpci_ops(struct virtio_hw *hw)
{
#ifdef RTE_VIRTIO_USER
- if (hw->virtio_user_dev)
+ if (hw->bus_type == VIRTIO_BUS_USER)
VTPCI_OPS(hw) = &virtio_user_ops;
else
#endif
- if (hw->modern)
+ if (hw->bus_type == VIRTIO_BUS_PCI_MODERN)
VTPCI_OPS(hw) = &modern_ops;
- else
+ else if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY)
VTPCI_OPS(hw) = &legacy_ops;
+
+ return;
}
/*
@@ -1919,7 +1921,7 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
eth_dev->rx_descriptor_done = virtio_dev_rx_queue_done;
if (rte_eal_process_type() == RTE_PROC_SECONDARY) {
- if (!hw->virtio_user_dev) {
+ if (hw->bus_type != VIRTIO_BUS_USER) {
ret = virtio_remap_pci(RTE_ETH_DEV_TO_PCI(eth_dev), hw);
if (ret)
return ret;
@@ -1950,7 +1952,7 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
/* For virtio_user case the hw->virtio_user_dev is populated by
* virtio_user_eth_dev_alloc() before eth_virtio_dev_init() is called.
*/
- if (!hw->virtio_user_dev) {
+ if (hw->bus_type != VIRTIO_BUS_USER) {
ret = vtpci_init(RTE_ETH_DEV_TO_PCI(eth_dev), hw);
if (ret)
goto err_vtpci_init;
@@ -1982,9 +1984,9 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev)
return 0;
err_virtio_init:
- if (!hw->virtio_user_dev) {
+ if (hw->bus_type == VIRTIO_BUS_PCI_MODERN || hw->bus_type == VIRTIO_BUS_PCI_LEGACY) {
rte_pci_unmap_device(RTE_ETH_DEV_TO_PCI(eth_dev));
- if (!hw->modern)
+ if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY)
rte_pci_ioport_unmap(VTPCI_IO(hw));
}
err_vtpci_init:
diff --git a/drivers/net/virtio/virtio_pci.c b/drivers/net/virtio/virtio_pci.c
index d6b950ee69..1692268f30 100644
--- a/drivers/net/virtio/virtio_pci.c
+++ b/drivers/net/virtio/virtio_pci.c
@@ -697,7 +697,7 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
if (virtio_read_caps(dev, hw) == 0) {
PMD_INIT_LOG(INFO, "modern virtio pci detected.");
virtio_hw_internal[hw->port_id].vtpci_ops = &modern_ops;
- hw->modern = 1;
+ hw->bus_type = VIRTIO_BUS_PCI_MODERN;
return 0;
}
@@ -716,7 +716,7 @@ vtpci_init(struct rte_pci_device *dev, struct virtio_hw *hw)
}
virtio_hw_internal[hw->port_id].vtpci_ops = &legacy_ops;
- hw->modern = 0;
+ hw->bus_type = VIRTIO_BUS_PCI_LEGACY;
return 0;
}
diff --git a/drivers/net/virtio/virtio_pci.h b/drivers/net/virtio/virtio_pci.h
index ab61e911b8..6388f0a74d 100644
--- a/drivers/net/virtio/virtio_pci.h
+++ b/drivers/net/virtio/virtio_pci.h
@@ -243,7 +243,15 @@ struct virtio_pci_ops {
struct virtio_net_config;
+enum virtio_bus_type {
+ VIRTIO_BUS_UNKNOWN,
+ VIRTIO_BUS_PCI_LEGACY,
+ VIRTIO_BUS_PCI_MODERN,
+ VIRTIO_BUS_USER,
+};
+
struct virtio_hw {
+ enum virtio_bus_type bus_type;
struct virtnet_ctl *cvq;
uint64_t req_guest_features;
uint64_t guest_features;
@@ -253,7 +261,6 @@ struct virtio_hw {
uint16_t vtnet_hdr_size;
uint8_t vlan_strip;
uint8_t use_msix;
- uint8_t modern;
uint8_t use_vec_rx;
uint8_t use_vec_tx;
uint8_t use_inorder_rx;
diff --git a/drivers/net/virtio/virtio_user_ethdev.c b/drivers/net/virtio/virtio_user_ethdev.c
index 7abba1f1ee..441721b6ca 100644
--- a/drivers/net/virtio/virtio_user_ethdev.c
+++ b/drivers/net/virtio/virtio_user_ethdev.c
@@ -629,7 +629,7 @@ virtio_user_eth_dev_alloc(struct rte_vdev_device *vdev)
* Here just pretend that we support msix.
*/
hw->use_msix = 1;
- hw->modern = 0;
+ hw->bus_type = VIRTIO_BUS_USER;
hw->use_vec_rx = 0;
hw->use_vec_tx = 0;
hw->use_inorder_rx = 0;
--
2.29.2
next prev parent reply other threads:[~2021-01-25 17:15 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-25 17:14 [dpdk-dev] [PATCH v3 00/44] net/virtio: Virtio PMD rework Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 01/44] bus/vdev: add helper to get vdev from ethdev Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 02/44] bus/vdev: add driver IOVA VA mode requirement Maxime Coquelin
2021-01-26 9:23 ` Xia, Chenbo
2021-01-26 9:24 ` Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 03/44] net/virtio: fix getting old status on reconnect Maxime Coquelin
2021-01-25 17:14 ` Maxime Coquelin [this message]
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 05/44] net/virtio: refactor virtio-user device Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 06/44] net/virtio: introduce PCI device metadata Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 07/44] net/virtio: move PCI device init in dedicated file Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 08/44] net/virtio: move PCI specific dev init to PCI ethdev init Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 09/44] net/virtio: move MSIX detection to PCI ethdev Maxime Coquelin
2021-01-26 5:53 ` Xia, Chenbo
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 10/44] net/virtio: force IOVA as VA mode for Virtio-user Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 11/44] net/virtio: store PCI type in Virtio device metadata Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 12/44] net/virtio: add callback for device closing Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 13/44] net/virtio: validate features at bus level Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 14/44] net/virtio: remove bus type enum Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 15/44] net/virtio: move PCI-specific fields to PCI device Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 16/44] net/virtio: pack virtio HW struct Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 17/44] net/virtio: move legacy IO to Virtio PCI Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 18/44] net/virtio: introduce generic virtio header Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 19/44] net/virtio: move features definition to generic header Maxime Coquelin
2021-01-26 5:55 ` Xia, Chenbo
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 20/44] net/virtio: move virtqueue defines in " Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 21/44] net/virtio: move config definitions to " Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 22/44] net/virtio: make interrupt handling more generic Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 23/44] net/virtio: move vring alignment to generic header Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 24/44] net/virtio: remove last PCI refs in non-PCI code Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 25/44] net/virtio: make Vhost-user request sender consistent Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 26/44] net/virtio: add Virtio-user ops to set owner Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 27/44] net/virtio: add Virtio-user features ops Maxime Coquelin
2021-01-26 5:58 ` Xia, Chenbo
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 28/44] net/virtio: add Virtio-user protocol " Maxime Coquelin
2021-01-26 6:09 ` Xia, Chenbo
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 29/44] net/virtio: add Virtio-user memory tables ops Maxime Coquelin
2021-01-26 6:09 ` Xia, Chenbo
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 30/44] net/virtio: add Virtio-user vring setting ops Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 31/44] net/virtio: add Virtio-user vring file ops Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 32/44] net/virtio: add Virtio-user vring address ops Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 33/44] net/virtio: add Virtio-user status ops Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 34/44] net/virtio: remove useless request ops Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 35/44] net/virtio: improve Virtio-user errors handling Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 36/44] net/virtio: move Vhost-user requests to Vhost-user backend Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 37/44] net/virtio: make server mode blocking Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 38/44] net/virtio: move protocol features to Vhost-user Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 39/44] net/virtio: introduce backend data Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 40/44] net/virtio: move Vhost-user specifics to its backend Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 41/44] net/virtio: move Vhost-kernel data " Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 42/44] net/virtio: move Vhost-vDPA " Maxime Coquelin
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 43/44] net/virtio: improve Vhost-user error logging Maxime Coquelin
2021-01-26 6:25 ` Xia, Chenbo
2021-01-25 17:14 ` [dpdk-dev] [PATCH v3 44/44] net/virtio: handle Virtio-user setup failure properly Maxime Coquelin
2021-01-26 6:36 ` Xia, Chenbo
2021-01-26 9:15 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210125171444.167241-5-maxime.coquelin@redhat.com \
--to=maxime.coquelin@redhat.com \
--cc=amorenoz@redhat.com \
--cc=chenbo.xia@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=olivier.matz@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).