From: Nalla Pradeep <pnalla@marvell.com>
To: Nalla Pradeep <pnalla@marvell.com>,
Radha Mohan Chintakuntla <radhac@marvell.com>,
Veerasenareddy Burru <vburru@marvell.com>,
"Anatoly Burakov" <anatoly.burakov@intel.com>
Cc: <jerinj@marvell.com>, <sburla@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v4 03/11] net/octeontx_ep: add device init and uninit
Date: Tue, 26 Jan 2021 13:39:52 -0800 [thread overview]
Message-ID: <20210126214000.57909-3-pnalla@marvell.com> (raw)
In-Reply-To: <20210126214000.57909-1-pnalla@marvell.com>
Add basic init and uninit function which includes
initializing fields of ethdev private structure.
Signed-off-by: Nalla Pradeep <pnalla@marvell.com>
---
drivers/net/octeontx_ep/otx_ep_common.h | 22 ++++++-
drivers/net/octeontx_ep/otx_ep_ethdev.c | 88 +++++++++++++++++++++++--
2 files changed, 104 insertions(+), 6 deletions(-)
diff --git a/drivers/net/octeontx_ep/otx_ep_common.h b/drivers/net/octeontx_ep/otx_ep_common.h
index 35ea99a79..f84ab88db 100644
--- a/drivers/net/octeontx_ep/otx_ep_common.h
+++ b/drivers/net/octeontx_ep/otx_ep_common.h
@@ -4,11 +4,31 @@
#ifndef _OTX_EP_COMMON_H_
#define _OTX_EP_COMMON_H_
+#define otx_ep_printf(level, fmt, args...) \
+ rte_log(RTE_LOG_ ## level, RTE_LOGTYPE_PMD, \
+ fmt, ##args)
+
+#define otx_ep_info(fmt, args...) \
+ RTE_LOG(INFO, PMD, fmt "\n", ## args)
+
+#define otx_ep_err(fmt, args...) \
+ RTE_LOG(ERR, PMD, "%s():%u " fmt "\n", \
+ __func__, __LINE__, ## args)
+
+#define otx_ep_dbg(fmt, args...) \
+ rte_log(RTE_LOG_DEBUG, otx_net_ep_logtype, \
+ "%s():%u " fmt "\n", \
+ __func__, __LINE__, ##args)
+
/* OTX_EP EP VF device data structure */
struct otx_ep_device {
/* PCI device pointer */
struct rte_pci_device *pdev;
-
+ uint16_t chip_id;
struct rte_eth_dev *eth_dev;
+ int port_id;
+ /* Memory mapped h/w address */
+ uint8_t *hw_addr;
+ int port_configured;
};
#endif /* _OTX_EP_COMMON_H_ */
diff --git a/drivers/net/octeontx_ep/otx_ep_ethdev.c b/drivers/net/octeontx_ep/otx_ep_ethdev.c
index 461474be1..adb3ec2ee 100644
--- a/drivers/net/octeontx_ep/otx_ep_ethdev.c
+++ b/drivers/net/octeontx_ep/otx_ep_ethdev.c
@@ -10,20 +10,99 @@
#include "otx_ep_common.h"
#include "otx_ep_vf.h"
+#define OTX_EP_DEV(_eth_dev) ((_eth_dev)->data->dev_private)
+static int
+otx_ep_chip_specific_setup(struct otx_ep_device *otx_epvf)
+{
+ struct rte_pci_device *pdev = otx_epvf->pdev;
+ uint32_t dev_id = pdev->id.device_id;
+ int ret;
+
+ switch (dev_id) {
+ case PCI_DEVID_OCTEONTX_EP_VF:
+ otx_epvf->chip_id = dev_id;
+ break;
+ case PCI_DEVID_OCTEONTX2_EP_NET_VF:
+ case PCI_DEVID_CN98XX_EP_NET_VF:
+ otx_epvf->chip_id = dev_id;
+ break;
+ default:
+ otx_ep_err("Unsupported device\n");
+ ret = -EINVAL;
+ }
+
+ if (!ret)
+ otx_ep_info("OTX_EP dev_id[%d]\n", dev_id);
+
+ return ret;
+}
+
+/* OTX_EP VF device initialization */
+static int
+otx_epdev_init(struct otx_ep_device *otx_epvf)
+{
+ if (otx_ep_chip_specific_setup(otx_epvf)) {
+ otx_ep_err("Chip specific setup failed\n");
+ goto setup_fail;
+ }
+
+ return 0;
+
+setup_fail:
+ return -ENOMEM;
+}
+
static int
otx_ep_eth_dev_uninit(struct rte_eth_dev *eth_dev)
{
- RTE_SET_USED(eth_dev);
+ struct otx_ep_device *otx_epvf = OTX_EP_DEV(eth_dev);
+
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+ otx_epvf->port_configured = 0;
+
+ if (eth_dev->data->mac_addrs != NULL)
+ rte_free(eth_dev->data->mac_addrs);
- return -ENODEV;
+ return 0;
}
static int
otx_ep_eth_dev_init(struct rte_eth_dev *eth_dev)
{
- RTE_SET_USED(eth_dev);
+ struct rte_pci_device *pdev = RTE_ETH_DEV_TO_PCI(eth_dev);
+ struct otx_ep_device *otx_epvf = OTX_EP_DEV(eth_dev);
+ unsigned char vf_mac_addr[RTE_ETHER_ADDR_LEN];
- return -ENODEV;
+ /* Single process support */
+ if (rte_eal_process_type() != RTE_PROC_PRIMARY)
+ return 0;
+
+ rte_eth_copy_pci_info(eth_dev, pdev);
+
+ if (pdev->mem_resource[0].addr) {
+ otx_ep_info("OTX_EP BAR0 is mapped:\n");
+ } else {
+ otx_ep_err("OTX_EP: Failed to map device BARs\n");
+ otx_ep_err("BAR0 %p\n", pdev->mem_resource[0].addr);
+ return -ENODEV;
+ }
+ otx_epvf->eth_dev = eth_dev;
+ otx_epvf->port_id = eth_dev->data->port_id;
+ eth_dev->data->mac_addrs = rte_zmalloc("otx_ep", RTE_ETHER_ADDR_LEN, 0);
+ if (eth_dev->data->mac_addrs == NULL) {
+ otx_ep_err("MAC addresses memory allocation failed\n");
+ return -ENOMEM;
+ }
+ rte_eth_random_addr(vf_mac_addr);
+ memcpy(eth_dev->data->mac_addrs, vf_mac_addr, RTE_ETHER_ADDR_LEN);
+ otx_epvf->hw_addr = pdev->mem_resource[0].addr;
+ otx_epvf->pdev = pdev;
+
+ otx_epdev_init(otx_epvf);
+ otx_epvf->port_configured = 0;
+
+ return 0;
}
static int
@@ -42,7 +121,6 @@ otx_ep_eth_dev_pci_remove(struct rte_pci_device *pci_dev)
otx_ep_eth_dev_uninit);
}
-
/* Set of PCI devices this driver supports */
static const struct rte_pci_id pci_id_otx_ep_map[] = {
{ RTE_PCI_DEVICE(PCI_VENDOR_ID_CAVIUM, PCI_DEVID_OCTEONTX_EP_VF) },
--
2.17.1
next prev parent reply other threads:[~2021-01-26 21:41 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-26 21:39 [dpdk-dev] [PATCH v4 01/11] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-26 21:39 ` [dpdk-dev] [PATCH v4 02/11] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-26 21:39 ` Nalla Pradeep [this message]
2021-01-26 21:39 ` [dpdk-dev] [PATCH v4 04/11] net/octeontx_ep: Added basic device setup Nalla Pradeep
2021-01-26 21:39 ` [dpdk-dev] [PATCH v4 05/11] net/octeontx_ep: Add dev info get and configure Nalla Pradeep
2021-01-26 21:39 ` [dpdk-dev] [PATCH v4 06/11] net/octeontx_ep: Added rxq setup and release Nalla Pradeep
2021-01-26 21:39 ` [dpdk-dev] [PATCH v4 07/11] net/octeontx_ep: Added tx queue " Nalla Pradeep
2021-01-26 21:39 ` [dpdk-dev] [PATCH v4 08/11] net/octeontx_ep: Setting up iq and oq registers Nalla Pradeep
2021-01-26 21:39 ` [dpdk-dev] [PATCH v4 09/11] net/octeontx_ep: Added dev start and stop Nalla Pradeep
2021-01-26 21:39 ` [dpdk-dev] [PATCH v4 10/11] net/octeontx_ep: Receive data path function added Nalla Pradeep
2021-01-26 21:40 ` [dpdk-dev] [PATCH v4 11/11] net/octeontx_ep: Transmit " Nalla Pradeep
2021-01-27 10:56 ` [dpdk-dev] [PATCH v4 01/11] net/octeontx_ep: add build and doc infrastructure Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210126214000.57909-3-pnalla@marvell.com \
--to=pnalla@marvell.com \
--cc=anatoly.burakov@intel.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=radhac@marvell.com \
--cc=sburla@marvell.com \
--cc=vburru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).