From: Nalla Pradeep <pnalla@marvell.com>
To: Nalla Pradeep <pnalla@marvell.com>,
Radha Mohan Chintakuntla <radhac@marvell.com>,
Veerasenareddy Burru <vburru@marvell.com>
Cc: <jerinj@marvell.com>, <sburla@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v6 11/12] net/octeontx_ep: receive data path function added
Date: Thu, 28 Jan 2021 16:16:38 -0800 [thread overview]
Message-ID: <20210129001640.1251-12-pnalla@marvell.com> (raw)
In-Reply-To: <20210128152220.214485-1-pnalla@marvell.com>
Function to deliver packets from DROQ to application is added. It also
fills DROQ with receive buffers timely such that device can fill them
with incoming packets.
Signed-off-by: Nalla Pradeep <pnalla@marvell.com>
---
drivers/net/octeontx_ep/otx_ep_common.h | 1 +
drivers/net/octeontx_ep/otx_ep_ethdev.c | 3 +
drivers/net/octeontx_ep/otx_ep_rxtx.c | 287 +++++++++++++++++++++++-
drivers/net/octeontx_ep/otx_ep_rxtx.h | 12 +-
4 files changed, 301 insertions(+), 2 deletions(-)
diff --git a/drivers/net/octeontx_ep/otx_ep_common.h b/drivers/net/octeontx_ep/otx_ep_common.h
index e0ce37ef4..e6618029c 100644
--- a/drivers/net/octeontx_ep/otx_ep_common.h
+++ b/drivers/net/octeontx_ep/otx_ep_common.h
@@ -21,6 +21,7 @@
#define SDP_OTX2_PKIND 57
#define OTX_EP_BUSY_LOOP_COUNT (10000)
#define OTX_EP_MAX_IOQS_PER_VF 8
+#define OTX_CUST_DATA_LEN 0
#define otx_ep_info(fmt, args...) \
rte_log(RTE_LOG_DEBUG, otx_net_ep_loginfo, \
diff --git a/drivers/net/octeontx_ep/otx_ep_ethdev.c b/drivers/net/octeontx_ep/otx_ep_ethdev.c
index f53c98132..1e4a206cd 100644
--- a/drivers/net/octeontx_ep/otx_ep_ethdev.c
+++ b/drivers/net/octeontx_ep/otx_ep_ethdev.c
@@ -136,6 +136,7 @@ otx_epdev_init(struct otx_ep_device *otx_epvf)
otx_epvf->fn_list.setup_device_regs(otx_epvf);
+ otx_epvf->eth_dev->rx_pkt_burst = &otx_ep_recv_pkts;
ethdev_queues = (uint32_t)(otx_epvf->sriov_info.rings_per_vf);
otx_epvf->max_rx_queues = ethdev_queues;
otx_epvf->max_tx_queues = ethdev_queues;
@@ -382,6 +383,8 @@ otx_ep_eth_dev_uninit(struct rte_eth_dev *eth_dev)
otx_epdev_exit(eth_dev);
eth_dev->dev_ops = NULL;
+ eth_dev->rx_pkt_burst = NULL;
+ eth_dev->tx_pkt_burst = NULL;
return 0;
}
diff --git a/drivers/net/octeontx_ep/otx_ep_rxtx.c b/drivers/net/octeontx_ep/otx_ep_rxtx.c
index f7fe5adcf..60c082bab 100644
--- a/drivers/net/octeontx_ep/otx_ep_rxtx.c
+++ b/drivers/net/octeontx_ep/otx_ep_rxtx.c
@@ -7,6 +7,8 @@
#include <rte_eal.h>
#include <rte_mempool.h>
#include <rte_mbuf.h>
+#include <rte_io.h>
+#include <rte_net.h>
#include <rte_ethdev_pci.h>
#include "otx_ep_common.h"
@@ -14,6 +16,10 @@
#include "otx2_ep_vf.h"
#include "otx_ep_rxtx.h"
+/* SDP_LENGTH_S specifies packet length and is of 8-byte size */
+#define INFO_SIZE 8
+#define DROQ_REFILL_THRESHOLD 16
+
static void
otx_ep_dmazone_free(const struct rte_memzone *mz)
{
@@ -240,7 +246,6 @@ otx_ep_droq_setup_ring_buffers(struct otx_ep_droq *droq)
if (buf == NULL) {
otx_ep_err("OQ buffer alloc failed\n");
droq->stats.rx_alloc_failure++;
- /* otx_ep_droq_destroy_ring_buffers(droq);*/
return -ENOMEM;
}
@@ -354,3 +359,283 @@ otx_ep_setup_oqs(struct otx_ep_device *otx_ep, int oq_no, int num_descs,
otx_ep_delete_oqs(otx_ep, oq_no);
return -ENOMEM;
}
+
+static uint32_t
+otx_ep_droq_refill(struct otx_ep_droq *droq)
+{
+ struct otx_ep_droq_desc *desc_ring;
+ struct otx_ep_droq_info *info;
+ struct rte_mbuf *buf = NULL;
+ uint32_t desc_refilled = 0;
+
+ desc_ring = droq->desc_ring;
+
+ while (droq->refill_count && (desc_refilled < droq->nb_desc)) {
+ /* If a valid buffer exists (happens if there is no dispatch),
+ * reuse the buffer, else allocate.
+ */
+ if (droq->recv_buf_list[droq->refill_idx] != NULL)
+ break;
+
+ buf = rte_pktmbuf_alloc(droq->mpool);
+ /* If a buffer could not be allocated, no point in
+ * continuing
+ */
+ if (buf == NULL) {
+ droq->stats.rx_alloc_failure++;
+ break;
+ }
+ info = rte_pktmbuf_mtod(buf, struct otx_ep_droq_info *);
+ memset(info, 0, sizeof(*info));
+
+ droq->recv_buf_list[droq->refill_idx] = buf;
+ desc_ring[droq->refill_idx].buffer_ptr =
+ rte_mbuf_data_iova_default(buf);
+
+
+ droq->refill_idx = otx_ep_incr_index(droq->refill_idx, 1,
+ droq->nb_desc);
+
+ desc_refilled++;
+ droq->refill_count--;
+ }
+
+ return desc_refilled;
+}
+
+static struct rte_mbuf *
+otx_ep_droq_read_packet(struct otx_ep_device *otx_ep,
+ struct otx_ep_droq *droq, int next_fetch)
+{
+ volatile struct otx_ep_droq_info *info;
+ struct rte_mbuf *droq_pkt2 = NULL;
+ struct rte_mbuf *droq_pkt = NULL;
+ struct rte_net_hdr_lens hdr_lens;
+ struct otx_ep_droq_info *info2;
+ uint64_t total_pkt_len;
+ uint32_t pkt_len = 0;
+ int next_idx;
+
+ droq_pkt = droq->recv_buf_list[droq->read_idx];
+ droq_pkt2 = droq->recv_buf_list[droq->read_idx];
+ info = rte_pktmbuf_mtod(droq_pkt, struct otx_ep_droq_info *);
+ /* make sure info is available */
+ rte_rmb();
+ if (unlikely(!info->length)) {
+ int retry = OTX_EP_MAX_DELAYED_PKT_RETRIES;
+ /* otx_ep_dbg("OCTEON DROQ[%d]: read_idx: %d; Data not ready "
+ * "yet, Retry; pending=%lu\n", droq->q_no, droq->read_idx,
+ * droq->pkts_pending);
+ */
+ droq->stats.pkts_delayed_data++;
+ while (retry && !info->length)
+ retry--;
+ if (!retry && !info->length) {
+ otx_ep_err("OCTEON DROQ[%d]: read_idx: %d; Retry failed !!\n",
+ droq->q_no, droq->read_idx);
+ /* May be zero length packet; drop it */
+ rte_pktmbuf_free(droq_pkt);
+ droq->recv_buf_list[droq->read_idx] = NULL;
+ droq->read_idx = otx_ep_incr_index(droq->read_idx, 1,
+ droq->nb_desc);
+ droq->stats.dropped_zlp++;
+ droq->refill_count++;
+ goto oq_read_fail;
+ }
+ }
+ if (next_fetch) {
+ next_idx = otx_ep_incr_index(droq->read_idx, 1, droq->nb_desc);
+ droq_pkt2 = droq->recv_buf_list[next_idx];
+ info2 = rte_pktmbuf_mtod(droq_pkt2, struct otx_ep_droq_info *);
+ rte_prefetch_non_temporal((const void *)info2);
+ }
+
+ info->length = rte_bswap64(info->length);
+ /* Deduce the actual data size */
+ total_pkt_len = info->length + INFO_SIZE;
+ if (total_pkt_len <= droq->buffer_size) {
+ info->length -= OTX_EP_RH_SIZE;
+ droq_pkt = droq->recv_buf_list[droq->read_idx];
+ if (likely(droq_pkt != NULL)) {
+ droq_pkt->data_off += OTX_EP_DROQ_INFO_SIZE;
+ /* otx_ep_dbg("OQ: pkt_len[%ld], buffer_size %d\n",
+ * (long)info->length, droq->buffer_size);
+ */
+ pkt_len = (uint32_t)info->length;
+ droq_pkt->pkt_len = pkt_len;
+ droq_pkt->data_len = pkt_len;
+ droq_pkt->port = otx_ep->port_id;
+ droq->recv_buf_list[droq->read_idx] = NULL;
+ droq->read_idx = otx_ep_incr_index(droq->read_idx, 1,
+ droq->nb_desc);
+ droq->refill_count++;
+ }
+ } else {
+ struct rte_mbuf *first_buf = NULL;
+ struct rte_mbuf *last_buf = NULL;
+
+ while (pkt_len < total_pkt_len) {
+ int cpy_len = 0;
+
+ cpy_len = ((pkt_len + droq->buffer_size) >
+ total_pkt_len)
+ ? ((uint32_t)total_pkt_len -
+ pkt_len)
+ : droq->buffer_size;
+
+ droq_pkt = droq->recv_buf_list[droq->read_idx];
+ droq->recv_buf_list[droq->read_idx] = NULL;
+
+ if (likely(droq_pkt != NULL)) {
+ /* Note the first seg */
+ if (!pkt_len)
+ first_buf = droq_pkt;
+
+ droq_pkt->port = otx_ep->port_id;
+ if (!pkt_len) {
+ droq_pkt->data_off +=
+ OTX_EP_DROQ_INFO_SIZE;
+ droq_pkt->pkt_len =
+ cpy_len - OTX_EP_DROQ_INFO_SIZE;
+ droq_pkt->data_len =
+ cpy_len - OTX_EP_DROQ_INFO_SIZE;
+ } else {
+ droq_pkt->pkt_len = cpy_len;
+ droq_pkt->data_len = cpy_len;
+ }
+
+ if (pkt_len) {
+ first_buf->nb_segs++;
+ first_buf->pkt_len += droq_pkt->pkt_len;
+ }
+
+ if (last_buf)
+ last_buf->next = droq_pkt;
+
+ last_buf = droq_pkt;
+ } else {
+ otx_ep_err("no buf\n");
+ }
+
+ pkt_len += cpy_len;
+ droq->read_idx = otx_ep_incr_index(droq->read_idx, 1,
+ droq->nb_desc);
+ droq->refill_count++;
+ }
+ droq_pkt = first_buf;
+ }
+ droq_pkt->packet_type = rte_net_get_ptype(droq_pkt, &hdr_lens,
+ RTE_PTYPE_ALL_MASK);
+ droq_pkt->l2_len = hdr_lens.l2_len;
+ droq_pkt->l3_len = hdr_lens.l3_len;
+ droq_pkt->l4_len = hdr_lens.l4_len;
+
+ if ((droq_pkt->pkt_len > (RTE_ETHER_MAX_LEN + OTX_CUST_DATA_LEN)) &&
+ !(otx_ep->rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME)) {
+ rte_pktmbuf_free(droq_pkt);
+ goto oq_read_fail;
+ }
+
+ if (droq_pkt->nb_segs > 1 &&
+ !(otx_ep->rx_offloads & DEV_RX_OFFLOAD_SCATTER)) {
+ rte_pktmbuf_free(droq_pkt);
+ goto oq_read_fail;
+ }
+
+ return droq_pkt;
+
+oq_read_fail:
+ return NULL;
+}
+
+static inline uint32_t
+otx_ep_check_droq_pkts(struct otx_ep_droq *droq)
+{
+ volatile uint64_t pkt_count;
+ uint32_t new_pkts;
+
+ /* Latest available OQ packets */
+ pkt_count = rte_read32(droq->pkts_sent_reg);
+ rte_write32(pkt_count, droq->pkts_sent_reg);
+ new_pkts = pkt_count;
+ droq->pkts_pending += new_pkts;
+ return new_pkts;
+}
+
+/* Check for response arrival from OCTEON TX2
+ * returns number of requests completed
+ */
+uint16_t
+otx_ep_recv_pkts(void *rx_queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t budget)
+{
+ struct otx_ep_droq *droq = rx_queue;
+ struct otx_ep_device *otx_ep;
+ struct rte_mbuf *oq_pkt;
+
+ uint32_t pkts = 0;
+ uint32_t new_pkts = 0;
+ int next_fetch;
+
+ otx_ep = droq->otx_ep_dev;
+
+ if (droq->pkts_pending > budget) {
+ new_pkts = budget;
+ } else {
+ new_pkts = droq->pkts_pending;
+ new_pkts += otx_ep_check_droq_pkts(droq);
+ if (new_pkts > budget)
+ new_pkts = budget;
+ }
+
+ if (!new_pkts)
+ goto update_credit; /* No pkts at this moment */
+
+ for (pkts = 0; pkts < new_pkts; pkts++) {
+ /* Push the received pkt to application */
+ next_fetch = (pkts == new_pkts - 1) ? 0 : 1;
+ oq_pkt = otx_ep_droq_read_packet(otx_ep, droq, next_fetch);
+ if (!oq_pkt) {
+ RTE_LOG_DP(ERR, PMD,
+ "DROQ read pkt failed pending %" PRIu64
+ "last_pkt_count %" PRIu64 "new_pkts %d.\n",
+ droq->pkts_pending, droq->last_pkt_count,
+ new_pkts);
+ droq->pkts_pending -= pkts;
+ droq->stats.rx_err++;
+ goto finish;
+ }
+ rx_pkts[pkts] = oq_pkt;
+ /* Stats */
+ droq->stats.pkts_received++;
+ droq->stats.bytes_received += oq_pkt->pkt_len;
+ }
+ droq->pkts_pending -= pkts;
+
+ /* Refill DROQ buffers */
+update_credit:
+ if (droq->refill_count >= DROQ_REFILL_THRESHOLD) {
+ int desc_refilled = otx_ep_droq_refill(droq);
+
+ /* Flush the droq descriptor data to memory to be sure
+ * that when we update the credits the data in memory is
+ * accurate.
+ */
+ rte_wmb();
+ rte_write32(desc_refilled, droq->pkts_credit_reg);
+ } else {
+ /*
+ * SDP output goes into DROP state when output doorbell count
+ * goes below drop count. When door bell count is written with
+ * a value greater than drop count SDP output should come out
+ * of DROP state. Due to a race condition this is not happening.
+ * Writing doorbell register with 0 again may make SDP output
+ * come out of this state.
+ */
+
+ rte_write32(0, droq->pkts_credit_reg);
+ }
+finish:
+ return pkts;
+}
diff --git a/drivers/net/octeontx_ep/otx_ep_rxtx.h b/drivers/net/octeontx_ep/otx_ep_rxtx.h
index 9779e96b6..d8b411459 100644
--- a/drivers/net/octeontx_ep/otx_ep_rxtx.h
+++ b/drivers/net/octeontx_ep/otx_ep_rxtx.h
@@ -7,4 +7,14 @@
#define OTX_EP_RXD_ALIGN 1
#define OTX_EP_TXD_ALIGN 1
-#endif
+#define OTX_EP_MAX_DELAYED_PKT_RETRIES 10000
+static inline uint32_t
+otx_ep_incr_index(uint32_t index, uint32_t count, uint32_t max)
+{
+ return ((index + count) & (max - 1));
+}
+uint16_t
+otx_ep_recv_pkts(void *rx_queue,
+ struct rte_mbuf **rx_pkts,
+ uint16_t budget);
+#endif /* _OTX_EP_RXTX_H_ */
--
2.17.1
next prev parent reply other threads:[~2021-01-29 0:18 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-18 9:35 [dpdk-dev] [PATCH v2 01/11] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 02/11] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-19 11:55 ` Jerin Jacob
2021-01-26 15:27 ` Ferruh Yigit
2021-01-27 11:45 ` [dpdk-dev] [EXT] " Pradeep Kumar Nalla
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 03/11] net/octeontx_ep: add device init and uninit Nalla Pradeep
2021-01-19 12:06 ` Jerin Jacob
2021-01-26 15:25 ` Ferruh Yigit
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 04/11] net/octeontx_ep: Added basic device setup Nalla Pradeep
2021-01-19 12:09 ` Jerin Jacob
2021-01-26 15:29 ` Ferruh Yigit
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 05/11] net/octeontx_ep: Add dev info get and configure Nalla Pradeep
2021-01-26 15:31 ` Ferruh Yigit
2021-01-28 7:03 ` [dpdk-dev] [EXT] " Pradeep Kumar Nalla
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 06/11] net/octeontx_ep: Added rxq setup and release Nalla Pradeep
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 07/11] net/octeontx_ep: Added tx queue " Nalla Pradeep
2021-01-18 9:35 ` [dpdk-dev] [PATCH v2 08/11] net/octeontx_ep: Setting up iq and oq registers Nalla Pradeep
2021-01-26 15:32 ` Ferruh Yigit
2021-01-18 9:36 ` [dpdk-dev] [PATCH v2 09/11] net/octeontx_ep: Added dev start and stop Nalla Pradeep
2021-01-26 15:32 ` Ferruh Yigit
2021-01-18 9:36 ` [dpdk-dev] [PATCH v2 10/11] net/octeontx_ep: Receive data path function added Nalla Pradeep
2021-01-26 15:33 ` Ferruh Yigit
2021-01-18 9:36 ` [dpdk-dev] [PATCH v2 11/11] net/octeontx_ep: Transmit " Nalla Pradeep
2021-01-26 15:35 ` Ferruh Yigit
2021-01-19 11:50 ` [dpdk-dev] [PATCH v2 01/11] net/octeontx_ep: add build and doc infrastructure Jerin Jacob
2021-01-26 15:09 ` Ferruh Yigit
2021-01-26 15:41 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 00/11] Octeon Tx/Tx2 Endpoint pmd Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 00/12] " Nalla Pradeep
2021-01-29 12:44 ` [dpdk-dev] [PATCH v7 " Nalla Pradeep
2021-01-29 14:08 ` Ferruh Yigit
2021-01-29 12:44 ` [dpdk-dev] [PATCH v7 01/12] raw/octeontx_ep: changed device id Nalla Pradeep
2021-02-11 0:58 ` Radha Mohan
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 02/12] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 03/12] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 04/12] net/octeontx_ep: add device init and uninit Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 05/12] net/octeontx_ep: added basic device setup Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 06/12] net/octeontx_ep: add dev info get and configure Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 07/12] net/octeontx_ep: added rxq setup and release Nalla Pradeep
2021-01-29 14:04 ` Ferruh Yigit
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 08/12] net/octeontx_ep: added tx queue " Nalla Pradeep
2021-01-29 14:04 ` Ferruh Yigit
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 09/12] net/octeontx_ep: setting up iq and oq registers Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 10/12] net/octeontx_ep: added dev start and stop Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 11/12] net/octeontx_ep: receive data path function added Nalla Pradeep
2021-01-29 12:45 ` [dpdk-dev] [PATCH v7 12/12] net/octeontx_ep: transmit " Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 01/12] raw/octeontx_ep: changed device id Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 02/12] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 03/12] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 04/12] net/octeontx_ep: add device init and uninit Nalla Pradeep
2021-01-29 9:19 ` Ferruh Yigit
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 05/12] net/octeontx_ep: added basic device setup Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 06/12] net/octeontx_ep: add dev info get and configure Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 07/12] net/octeontx_ep: added rxq setup and release Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 08/12] net/octeontx_ep: added tx queue " Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 09/12] net/octeontx_ep: setting up iq and oq registers Nalla Pradeep
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 10/12] net/octeontx_ep: added dev start and stop Nalla Pradeep
2021-01-29 0:16 ` Nalla Pradeep [this message]
2021-01-29 9:24 ` [dpdk-dev] [PATCH v6 11/12] net/octeontx_ep: receive data path function added Ferruh Yigit
2021-01-29 0:16 ` [dpdk-dev] [PATCH v6 12/12] net/octeontx_ep: transmit " Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 01/11] net/octeontx_ep: add build and doc infrastructure Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 02/11] net/octeontx_ep: add ethdev probe and remove Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 03/11] net/octeontx_ep: add device init and uninit Nalla Pradeep
2021-01-28 16:55 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 04/11] net/octeontx_ep: added basic device setup Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 05/11] net/octeontx_ep: add dev info get and configure Nalla Pradeep
2021-01-28 16:56 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 06/11] net/octeontx_ep: added rxq setup and release Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 07/11] net/octeontx_ep: added tx queue " Nalla Pradeep
2021-01-28 16:57 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 08/11] net/octeontx_ep: setting up iq and oq registers Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 09/11] net/octeontx_ep: added dev start and stop Nalla Pradeep
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 10/11] net/octeontx_ep: receive data path function added Nalla Pradeep
2021-01-28 16:58 ` Ferruh Yigit
2021-01-28 15:22 ` [dpdk-dev] [PATCH v5 11/11] net/octeontx_ep: transmit " Nalla Pradeep
2021-01-28 16:59 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210129001640.1251-12-pnalla@marvell.com \
--to=pnalla@marvell.com \
--cc=dev@dpdk.org \
--cc=jerinj@marvell.com \
--cc=radhac@marvell.com \
--cc=sburla@marvell.com \
--cc=vburru@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).