DPDK patches and discussions
 help / color / mirror / Atom feed
From: Lance Richardson <lance.richardson@broadcom.com>
To: Ajit Khaparde <ajit.khaparde@broadcom.com>,
	Somnath Kotur <somnath.kotur@broadcom.com>
Cc: dev@dpdk.org, stable@dpdk.org
Subject: [dpdk-dev] [PATCH v2] net/bnxt: fix cp ring size calculation
Date: Fri, 29 Jan 2021 13:07:09 -0500	[thread overview]
Message-ID: <20210129180709.101772-1-lance.richardson@broadcom.com> (raw)

[-- Attachment #1: Type: text/plain, Size: 4734 bytes --]

The size of the receive completion ring should be recalculated
when MTU is increased to a size that requires scattered receive
or when LRO is enabled. Move logic for this calculation from
the ring configuration path to the device start path.
   - Made size calculation dependent only on scattered_rx
     status.
   - Moved calculation of scattered_rx up in the initialization
     sequence.
   - Made LRO offload status part of scattered_rx calculation.

When the completion ring size is too small, completion overflows
can occur causing the ring to be disabled in hardware.

Fixes: 04067844a3e9 ("net/bnxt: reduce CQ queue size without aggregation ring")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
---
v2: Fixed conflict resolution mistake (two missing hunks).

 drivers/net/bnxt/bnxt_ethdev.c |  6 +++++-
 drivers/net/bnxt/bnxt_ring.c   | 22 ++++++++++++++++++++++
 drivers/net/bnxt/bnxt_rxr.c    | 15 +--------------
 3 files changed, 28 insertions(+), 15 deletions(-)

diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index ec88cb0046..ca779726ec 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -1143,6 +1143,9 @@ static int bnxt_scattered_rx(struct rte_eth_dev *eth_dev)
 	if (eth_dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_SCATTER)
 		return 1;
 
+	if (eth_dev->data->dev_conf.rxmode.offloads & DEV_RX_OFFLOAD_TCP_LRO)
+		return 1;
+
 	for (i = 0; i < eth_dev->data->nb_rx_queues; i++) {
 		struct bnxt_rx_queue *rxq = eth_dev->data->rx_queues[i];
 
@@ -1418,11 +1421,12 @@ static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
 
 	bnxt_enable_int(bp);
 
+	eth_dev->data->scattered_rx = bnxt_scattered_rx(eth_dev);
+
 	rc = bnxt_start_nic(bp);
 	if (rc)
 		goto error;
 
-	eth_dev->data->scattered_rx = bnxt_scattered_rx(eth_dev);
 	eth_dev->data->dev_started = 1;
 
 	bnxt_link_update_op(eth_dev, 1);
diff --git a/drivers/net/bnxt/bnxt_ring.c b/drivers/net/bnxt/bnxt_ring.c
index 4e513244a6..ba23c1fa03 100644
--- a/drivers/net/bnxt/bnxt_ring.c
+++ b/drivers/net/bnxt/bnxt_ring.c
@@ -583,6 +583,17 @@ int bnxt_alloc_hwrm_rx_ring(struct bnxt *bp, int queue_index)
 	struct bnxt_rx_ring_info *rxr = rxq->rx_ring;
 	int rc;
 
+	/*
+	 * Storage for the cp ring is allocated based on worst-case
+	 * usage, the actual size to be used by hw is computed here.
+	 */
+	cp_ring->ring_size = rxr->rx_ring_struct->ring_size * 2;
+
+	if (bp->eth_dev->data->scattered_rx)
+		cp_ring->ring_size *= AGG_RING_SIZE_FACTOR;
+
+	cp_ring->ring_mask = cp_ring->ring_size - 1;
+
 	rc = bnxt_alloc_cmpl_ring(bp, queue_index, cpr);
 	if (rc)
 		goto err_out;
@@ -693,6 +704,17 @@ int bnxt_alloc_hwrm_rings(struct bnxt *bp)
 		struct bnxt_ring *cp_ring = cpr->cp_ring_struct;
 		struct bnxt_rx_ring_info *rxr = rxq->rx_ring;
 
+		/*
+		 * Storage for the cp ring is allocated based on worst-case
+		 * usage, the actual size to be used by hw is computed here.
+		 */
+		cp_ring->ring_size = rxr->rx_ring_struct->ring_size * 2;
+
+		if (bp->eth_dev->data->scattered_rx)
+			cp_ring->ring_size *= AGG_RING_SIZE_FACTOR;
+
+		cp_ring->ring_mask = cp_ring->ring_size - 1;
+
 		if (bnxt_alloc_cmpl_ring(bp, i, cpr))
 			goto err_out;
 
diff --git a/drivers/net/bnxt/bnxt_rxr.c b/drivers/net/bnxt/bnxt_rxr.c
index 8c2781c968..4674f7cea2 100644
--- a/drivers/net/bnxt/bnxt_rxr.c
+++ b/drivers/net/bnxt/bnxt_rxr.c
@@ -1116,12 +1116,9 @@ void bnxt_free_rx_rings(struct bnxt *bp)
 
 int bnxt_init_rx_ring_struct(struct bnxt_rx_queue *rxq, unsigned int socket_id)
 {
-	struct rte_eth_dev *eth_dev = rxq->bp->eth_dev;
-	struct rte_eth_rxmode *rxmode;
 	struct bnxt_cp_ring_info *cpr;
 	struct bnxt_rx_ring_info *rxr;
 	struct bnxt_ring *ring;
-	bool use_agg_ring;
 
 	rxq->rx_buf_size = BNXT_MAX_PKT_LEN + sizeof(struct rte_mbuf);
 
@@ -1164,19 +1161,9 @@ int bnxt_init_rx_ring_struct(struct bnxt_rx_queue *rxq, unsigned int socket_id)
 		return -ENOMEM;
 	cpr->cp_ring_struct = ring;
 
-	rxmode = &eth_dev->data->dev_conf.rxmode;
-	use_agg_ring = (rxmode->offloads & DEV_RX_OFFLOAD_SCATTER) ||
-		       (rxmode->offloads & DEV_RX_OFFLOAD_TCP_LRO) ||
-		       (rxmode->max_rx_pkt_len >
-			 (uint32_t)(rte_pktmbuf_data_room_size(rxq->mb_pool) -
-				    RTE_PKTMBUF_HEADROOM));
-
 	/* Allocate two completion slots per entry in desc ring. */
 	ring->ring_size = rxr->rx_ring_struct->ring_size * 2;
-
-	/* Allocate additional slots if aggregation ring is in use. */
-	if (use_agg_ring)
-		ring->ring_size *= AGG_RING_SIZE_FACTOR;
+	ring->ring_size *= AGG_RING_SIZE_FACTOR;
 
 	ring->ring_size = rte_align32pow2(ring->ring_size);
 	ring->ring_mask = ring->ring_size - 1;
-- 
2.25.1


             reply	other threads:[~2021-01-29 18:07 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-29 18:07 Lance Richardson [this message]
2021-01-31  1:27 ` Ajit Khaparde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210129180709.101772-1-lance.richardson@broadcom.com \
    --to=lance.richardson@broadcom.com \
    --cc=ajit.khaparde@broadcom.com \
    --cc=dev@dpdk.org \
    --cc=somnath.kotur@broadcom.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).