From: Alexander Kozyrev <akozyrev@nvidia.com>
To: dev@dpdk.org
Cc: stable@dpdk.org, rasland@nvidia.com, viacheslavo@nvidia.com,
matan@nvidia.com
Subject: [dpdk-dev] [PATCH] net/mlx5: check FW miniCQE format capabilities
Date: Tue, 2 Feb 2021 02:07:37 +0000 [thread overview]
Message-ID: <20210202020737.31589-1-akozyrev@nvidia.com> (raw)
miniCQE formats for Flow Tag and L3/L4 Header compression are only
supported by Mellanox FW starting version 16.29.392. There is no
point to allow user to enable these formats if FW cannot provide them.
Check FW capabilities and deny user requests if the selected miniCQE
format is not supported by an underlying NIC.
Cc: stable@dpdk.org
Fixes: 54c2d46b16 ("net/mlx5: support flow tag and packet header miniCQEs")
Signed-off-by: Alexander Kozyrev <akozyrev@nvidia.com>
---
drivers/common/mlx5/mlx5_devx_cmds.c | 5 +++++
drivers/common/mlx5/mlx5_devx_cmds.h | 3 +++
drivers/common/mlx5/mlx5_prm.h | 5 ++++-
drivers/net/mlx5/linux/mlx5_os.c | 30 ++++++++++++++++++----------
4 files changed, 31 insertions(+), 12 deletions(-)
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.c b/drivers/common/mlx5/mlx5_devx_cmds.c
index b075af9f6d..cc70c794e7 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.c
+++ b/drivers/common/mlx5/mlx5_devx_cmds.c
@@ -744,6 +744,11 @@ mlx5_devx_cmd_query_hca_attr(void *ctx,
log_compress_mmo_size);
attr->log_max_mmo_decompress = MLX5_GET(cmd_hca_cap, hcattr,
log_decompress_mmo_size);
+ attr->cqe_compression = MLX5_GET(cmd_hca_cap, hcattr, cqe_compression);
+ attr->mini_cqe_resp_flow_tag = MLX5_GET(cmd_hca_cap, hcattr,
+ mini_cqe_resp_flow_tag);
+ attr->mini_cqe_resp_l3_l4_tag = MLX5_GET(cmd_hca_cap, hcattr,
+ mini_cqe_resp_l3_l4_tag);
if (attr->qos.sup) {
MLX5_SET(query_hca_cap_in, in, op_mod,
MLX5_GET_HCA_CAP_OP_MOD_QOS_CAP |
diff --git a/drivers/common/mlx5/mlx5_devx_cmds.h b/drivers/common/mlx5/mlx5_devx_cmds.h
index 3e2a0a24f9..9dcd917c39 100644
--- a/drivers/common/mlx5/mlx5_devx_cmds.h
+++ b/drivers/common/mlx5/mlx5_devx_cmds.h
@@ -126,6 +126,9 @@ struct mlx5_hca_attr {
uint32_t regexp_num_of_engines;
uint32_t log_max_ft_sampler_num:8;
uint32_t geneve_tlv_opt;
+ uint32_t cqe_compression:1;
+ uint32_t mini_cqe_resp_flow_tag:1;
+ uint32_t mini_cqe_resp_l3_l4_tag:1;
struct mlx5_hca_qos_attr qos;
struct mlx5_hca_vdpa_attr vdpa;
int log_max_qp_sz;
diff --git a/drivers/common/mlx5/mlx5_prm.h b/drivers/common/mlx5/mlx5_prm.h
index 751dda2537..de721aa177 100644
--- a/drivers/common/mlx5/mlx5_prm.h
+++ b/drivers/common/mlx5/mlx5_prm.h
@@ -1444,7 +1444,10 @@ struct mlx5_ifc_cmd_hca_cap_bits {
u8 max_geneve_tlv_options[0x8];
u8 reserved_at_568[0x3];
u8 max_geneve_tlv_option_data_len[0x5];
- u8 reserved_at_570[0x4c];
+ u8 reserved_at_570[0x49];
+ u8 mini_cqe_resp_l3_l4_tag[0x1];
+ u8 mini_cqe_resp_flow_tag[0x1];
+ u8 enhanced_cqe_compression[0x1];
u8 mini_cqe_resp_stride_index[0x1];
u8 cqe_128_always[0x1];
u8 cqe_compression_128[0x1];
diff --git a/drivers/net/mlx5/linux/mlx5_os.c b/drivers/net/mlx5/linux/mlx5_os.c
index 9b95b9fe31..79a4376f91 100644
--- a/drivers/net/mlx5/linux/mlx5_os.c
+++ b/drivers/net/mlx5/linux/mlx5_os.c
@@ -676,7 +676,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
int err = 0;
unsigned int hw_padding = 0;
unsigned int mps;
- unsigned int cqe_comp;
unsigned int tunnel_en = 0;
unsigned int mpls_en = 0;
unsigned int swp = 0;
@@ -868,12 +867,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
mprq_caps.max_single_wqe_log_num_of_strides;
}
#endif
- if (RTE_CACHE_LINE_SIZE == 128 &&
- !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP))
- cqe_comp = 0;
- else
- cqe_comp = 1;
- config->cqe_comp = cqe_comp;
#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
if (dv_attr.comp_mask & MLX5DV_CONTEXT_MASK_TUNNEL_OFFLOADS) {
tunnel_en = ((dv_attr.tunnel_offloads_caps &
@@ -1104,10 +1097,6 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
config->mps == MLX5_MPW_ENHANCED ? "enhanced " :
config->mps == MLX5_MPW ? "legacy " : "",
config->mps != MLX5_MPW_DISABLED ? "enabled" : "disabled");
- if (config->cqe_comp && !cqe_comp) {
- DRV_LOG(WARNING, "Rx CQE compression isn't supported");
- config->cqe_comp = 0;
- }
if (config->devx) {
err = mlx5_devx_cmd_query_hca_attr(sh->ctx, &config->hca_attr);
if (err) {
@@ -1206,6 +1195,25 @@ mlx5_dev_spawn(struct rte_device *dpdk_dev,
}
#endif
}
+ if (config->cqe_comp && RTE_CACHE_LINE_SIZE == 128 &&
+ !(dv_attr.flags & MLX5DV_CONTEXT_FLAGS_CQE_128B_COMP)) {
+ DRV_LOG(WARNING, "Rx CQE 128B compression is not supported");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_FTAG_STRIDX &&
+ (!config->devx || !config->hca_attr.mini_cqe_resp_flow_tag)) {
+ DRV_LOG(WARNING, "Flow Tag CQE compression"
+ " format isn't supported.");
+ config->cqe_comp = 0;
+ }
+ if (config->cqe_comp_fmt == MLX5_CQE_RESP_FORMAT_L34H_STRIDX &&
+ (!config->devx || !config->hca_attr.mini_cqe_resp_l3_l4_tag)) {
+ DRV_LOG(WARNING, "L3/L4 Header CQE compression"
+ " format isn't supported.");
+ config->cqe_comp = 0;
+ }
+ DRV_LOG(DEBUG, "Rx CQE compression is %ssupported",
+ config->cqe_comp ? "" : "not ");
if (config->tx_pp) {
DRV_LOG(DEBUG, "Timestamp counter frequency %u kHz",
config->hca_attr.dev_freq_khz);
--
2.24.1
next reply other threads:[~2021-02-02 2:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-02 2:07 Alexander Kozyrev [this message]
2021-02-02 9:46 ` Slava Ovsiienko
2021-02-03 11:20 ` Raslan Darawsheh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210202020737.31589-1-akozyrev@nvidia.com \
--to=akozyrev@nvidia.com \
--cc=dev@dpdk.org \
--cc=matan@nvidia.com \
--cc=rasland@nvidia.com \
--cc=stable@dpdk.org \
--cc=viacheslavo@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).