DPDK patches and discussions
 help / color / mirror / Atom feed
From: Ivan Malov <ivan.malov@oktetlabs.ru>
To: dev@dpdk.org
Cc: stable@dpdk.org, Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
	Andy Moreton <amoreton@xilinx.com>,
	Igor Romanov <igor.romanov@oktetlabs.ru>,
	Robert Stonehouse <rstonehouse@solarflare.com>,
	Mark Spender <mspender@solarflare.com>,
	Andrew Lee <alee@solarflare.com>
Subject: [dpdk-dev] [PATCH] net/sfc: add 8000-series EF10 hardware TSO bug workaround
Date: Tue,  2 Feb 2021 18:23:45 +0300	[thread overview]
Message-ID: <20210202152345.2878-1-ivan.malov@oktetlabs.ru> (raw)

Innermost IP length and outer UDP datagram length must be
greater than or equal to the corresponding values derived
from the MSS; otherwise, the checksum offloads will break.

Fixes: c1ce2ba218f8 ("net/sfc: support tunnel TSO on EF10 native Tx datapath")
Fixes: 6bc985e41155 ("net/sfc: support TSO in EF10 Tx datapath")
Fixes: fec33d5bb3eb ("net/sfc: support firmware-assisted TSO")
Cc: stable@dpdk.org

Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
---
 drivers/net/sfc/sfc_ef10_tx.c | 19 +++++++++++++++++++
 drivers/net/sfc/sfc_tso.c     |  7 +++++++
 drivers/net/sfc/sfc_tso.h     | 30 ++++++++++++++++++++++++++++++
 3 files changed, 56 insertions(+)

diff --git a/drivers/net/sfc/sfc_ef10_tx.c b/drivers/net/sfc/sfc_ef10_tx.c
index 87fa40f3e..33d2d637c 100644
--- a/drivers/net/sfc/sfc_ef10_tx.c
+++ b/drivers/net/sfc/sfc_ef10_tx.c
@@ -481,6 +481,25 @@ sfc_ef10_xmit_tso_pkt(struct sfc_ef10_txq * const txq, struct rte_mbuf *m_seg,
 			needed_desc--;
 	}
 
+	/*
+	 * 8000-series EF10 hardware requires that innermost IP length
+	 * be greater than or equal to the value which each segment is
+	 * supposed to have; otherwise, TCP checksum will be incorrect.
+	 *
+	 * The same concern applies to outer UDP datagram length field.
+	 */
+	switch (m_seg->ol_flags & PKT_TX_TUNNEL_MASK) {
+	case PKT_TX_TUNNEL_VXLAN:
+		/* FALLTHROUGH */
+	case PKT_TX_TUNNEL_GENEVE:
+		sfc_tso_outer_udp_fix_len(first_m_seg, hdr_addr);
+		break;
+	default:
+		break;
+	}
+
+	sfc_tso_innermost_ip_fix_len(first_m_seg, hdr_addr, iph_off);
+
 	/*
 	 * Tx prepare has debug-only checks that offload flags are correctly
 	 * filled in in TSO mbuf. Use zero IPID if there is no IPv4 flag.
diff --git a/drivers/net/sfc/sfc_tso.c b/drivers/net/sfc/sfc_tso.c
index d6f111989..b090ef14d 100644
--- a/drivers/net/sfc/sfc_tso.c
+++ b/drivers/net/sfc/sfc_tso.c
@@ -140,6 +140,13 @@ sfc_efx_tso_do(struct sfc_efx_txq *txq, unsigned int idx,
 		tsoh = rte_pktmbuf_mtod(m, uint8_t *);
 	}
 
+	/*
+	 * 8000-series EF10 hardware requires that innermost IP length
+	 * be greater than or equal to the value which each segment is
+	 * supposed to have; otherwise, TCP checksum will be incorrect.
+	 */
+	sfc_tso_innermost_ip_fix_len(m, tsoh, nh_off);
+
 	/*
 	 * Handle IP header. Tx prepare has debug-only checks that offload flags
 	 * are correctly filled in in TSO mbuf. Use zero IPID if there is no
diff --git a/drivers/net/sfc/sfc_tso.h b/drivers/net/sfc/sfc_tso.h
index 8597c2868..361aa2219 100644
--- a/drivers/net/sfc/sfc_tso.h
+++ b/drivers/net/sfc/sfc_tso.h
@@ -38,6 +38,36 @@ sfc_tso_ip4_get_ipid(const uint8_t *pkt_hdrp, size_t ip_hdr_off)
 	return rte_be_to_cpu_16(ipid);
 }
 
+static inline void
+sfc_tso_outer_udp_fix_len(const struct rte_mbuf *m, uint8_t *tsoh)
+{
+	rte_be16_t len = rte_cpu_to_be_16(m->l2_len + m->l3_len + m->l4_len +
+					  m->tso_segsz);
+
+	rte_memcpy(tsoh + m->outer_l2_len + m->outer_l3_len +
+		   offsetof(struct rte_udp_hdr, dgram_len),
+		   &len, sizeof(len));
+}
+
+static inline void
+sfc_tso_innermost_ip_fix_len(const struct rte_mbuf *m, uint8_t *tsoh,
+			     size_t iph_ofst)
+{
+	size_t ip_payload_len = m->l4_len + m->tso_segsz;
+	size_t field_ofst;
+	rte_be16_t len;
+
+	if (m->ol_flags & PKT_TX_IPV4) {
+		field_ofst = offsetof(struct rte_ipv4_hdr, total_length);
+		len = rte_cpu_to_be_16(m->l3_len + ip_payload_len);
+	} else {
+		field_ofst = offsetof(struct rte_ipv6_hdr, payload_len);
+		len = rte_cpu_to_be_16(ip_payload_len);
+	}
+
+	rte_memcpy(tsoh + iph_ofst + field_ofst, &len, sizeof(len));
+}
+
 unsigned int sfc_tso_prepare_header(uint8_t *tsoh, size_t header_len,
 				    struct rte_mbuf **in_seg, size_t *in_off);
 
-- 
2.20.1


             reply	other threads:[~2021-02-02 15:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-02 15:23 Ivan Malov [this message]
2021-02-03 10:37 ` [dpdk-dev] [dpdk-stable] " Ferruh Yigit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210202152345.2878-1-ivan.malov@oktetlabs.ru \
    --to=ivan.malov@oktetlabs.ru \
    --cc=alee@solarflare.com \
    --cc=amoreton@xilinx.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=igor.romanov@oktetlabs.ru \
    --cc=mspender@solarflare.com \
    --cc=rstonehouse@solarflare.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).