From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: dev@dpdk.org
Cc: ferruh.yigit@intel.com, Apeksha Gupta <apeksha.gupta@nxp.com>
Subject: [dpdk-dev] [PATCH v3 11/23] net/dpaa2: dpdmux skip reset
Date: Wed, 24 Feb 2021 18:12:59 +0530 [thread overview]
Message-ID: <20210224124311.29799-12-hemant.agrawal@nxp.com> (raw)
In-Reply-To: <20210224124311.29799-1-hemant.agrawal@nxp.com>
From: Apeksha Gupta <apeksha.gupta@nxp.com>
This is require as the interface is shared with linux and we do not want
the dpdmux to be reset. rather the default interface to kernel shall
continue.
command dpdmux_set_resetable is used to skip DPDMUX reset.
By default the DPDMUX_RESET command will reset the DPDMUX completely,
dpdmux_set_resetable command will be ignored in old MC firmware.
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
drivers/net/dpaa2/dpaa2_mux.c | 26 +++++++++
drivers/net/dpaa2/mc/dpdmux.c | 84 +++++++++++++++++++++++++++
drivers/net/dpaa2/mc/fsl_dpdmux.h | 32 ++++++++++
drivers/net/dpaa2/mc/fsl_dpdmux_cmd.h | 22 ++++++-
4 files changed, 161 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dpaa2/dpaa2_mux.c b/drivers/net/dpaa2/dpaa2_mux.c
index b669a16fc1..1ff00ca8f7 100644
--- a/drivers/net/dpaa2/dpaa2_mux.c
+++ b/drivers/net/dpaa2/dpaa2_mux.c
@@ -264,6 +264,8 @@ dpaa2_create_dpdmux_device(int vdev_fd __rte_unused,
struct dpaa2_dpdmux_dev *dpdmux_dev;
struct dpdmux_attr attr;
int ret;
+ uint16_t maj_ver;
+ uint16_t min_ver;
PMD_INIT_FUNC_TRACE();
@@ -298,6 +300,30 @@ dpaa2_create_dpdmux_device(int vdev_fd __rte_unused,
goto init_err;
}
+ ret = dpdmux_get_api_version(&dpdmux_dev->dpdmux, CMD_PRI_LOW,
+ &maj_ver, &min_ver);
+ if (ret) {
+ DPAA2_PMD_ERR("setting version failed in %s",
+ __func__);
+ goto init_err;
+ }
+
+ /* The new dpdmux_set/get_resetable() API are available starting with
+ * DPDMUX_VER_MAJOR==6 and DPDMUX_VER_MINOR==6
+ */
+ if (maj_ver >= 6 && min_ver >= 6) {
+ ret = dpdmux_set_resetable(&dpdmux_dev->dpdmux, CMD_PRI_LOW,
+ dpdmux_dev->token,
+ DPDMUX_SKIP_DEFAULT_INTERFACE |
+ DPDMUX_SKIP_UNICAST_RULES |
+ DPDMUX_SKIP_MULTICAST_RULES);
+ if (ret) {
+ DPAA2_PMD_ERR("setting default interface failed in %s",
+ __func__);
+ goto init_err;
+ }
+ }
+
dpdmux_dev->dpdmux_id = dpdmux_id;
dpdmux_dev->num_ifs = attr.num_ifs;
diff --git a/drivers/net/dpaa2/mc/dpdmux.c b/drivers/net/dpaa2/mc/dpdmux.c
index 67d37ed4cd..57c811c70f 100644
--- a/drivers/net/dpaa2/mc/dpdmux.c
+++ b/drivers/net/dpaa2/mc/dpdmux.c
@@ -123,10 +123,12 @@ int dpdmux_create(struct fsl_mc_io *mc_io,
cmd_params->method = cfg->method;
cmd_params->manip = cfg->manip;
cmd_params->num_ifs = cpu_to_le16(cfg->num_ifs);
+ cmd_params->default_if = cpu_to_le16(cfg->default_if);
cmd_params->adv_max_dmat_entries =
cpu_to_le16(cfg->adv.max_dmat_entries);
cmd_params->adv_max_mc_groups = cpu_to_le16(cfg->adv.max_mc_groups);
cmd_params->adv_max_vlan_ids = cpu_to_le16(cfg->adv.max_vlan_ids);
+ cmd_params->mem_size = cpu_to_le16(cfg->adv.mem_size);
cmd_params->options = cpu_to_le64(cfg->adv.options);
/* send command to mc*/
@@ -278,6 +280,87 @@ int dpdmux_reset(struct fsl_mc_io *mc_io,
return mc_send_command(mc_io, &cmd);
}
+/**
+ * dpdmux_set_resetable() - Set overall resetable DPDMUX parameters.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPDMUX object
+ * @skip_reset_flags: By default all are 0.
+ * By setting 1 will deactivate the reset.
+ * The flags are:
+ * DPDMUX_SKIP_DEFAULT_INTERFACE 0x01
+ * DPDMUX_SKIP_UNICAST_RULES 0x02
+ * DPDMUX_SKIP_MULTICAST_RULES 0x04
+ *
+ * For example, by default, through DPDMUX_RESET the default
+ * interface will be restored with the one from create.
+ * By setting DPDMUX_SKIP_DEFAULT_INTERFACE flag,
+ * through DPDMUX_RESET the default interface will not be modified.
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpdmux_set_resetable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t skip_reset_flags)
+{
+ struct mc_command cmd = { 0 };
+ struct dpdmux_cmd_set_skip_reset_flags *cmd_params;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_SET_RESETABLE,
+ cmd_flags,
+ token);
+ cmd_params = (struct dpdmux_cmd_set_skip_reset_flags *)cmd.params;
+ dpdmux_set_field(cmd_params->skip_reset_flags,
+ SKIP_RESET_FLAGS,
+ skip_reset_flags);
+
+ /* send command to mc*/
+ return mc_send_command(mc_io, &cmd);
+}
+
+/**
+ * dpdmux_get_resetable() - Get overall resetable parameters.
+ * @mc_io: Pointer to MC portal's I/O object
+ * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_'
+ * @token: Token of DPDMUX object
+ * @skip_reset_flags: Get the reset flags.
+ *
+ * The flags are:
+ * DPDMUX_SKIP_DEFAULT_INTERFACE 0x01
+ * DPDMUX_SKIP_UNICAST_RULES 0x02
+ * DPDMUX_SKIP_MULTICAST_RULES 0x04
+ *
+ * Return: '0' on Success; Error code otherwise.
+ */
+int dpdmux_get_resetable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t *skip_reset_flags)
+{
+ struct mc_command cmd = { 0 };
+ struct dpdmux_rsp_get_skip_reset_flags *rsp_params;
+ int err;
+
+ /* prepare command */
+ cmd.header = mc_encode_cmd_header(DPDMUX_CMDID_GET_RESETABLE,
+ cmd_flags,
+ token);
+
+ /* send command to mc*/
+ err = mc_send_command(mc_io, &cmd);
+ if (err)
+ return err;
+
+ /* retrieve response parameters */
+ rsp_params = (struct dpdmux_rsp_get_skip_reset_flags *)cmd.params;
+ *skip_reset_flags = dpdmux_get_field(rsp_params->skip_reset_flags,
+ SKIP_RESET_FLAGS);
+
+ return 0;
+}
+
/**
* dpdmux_get_attributes() - Retrieve DPDMUX attributes
* @mc_io: Pointer to MC portal's I/O object
@@ -314,6 +397,7 @@ int dpdmux_get_attributes(struct fsl_mc_io *mc_io,
attr->manip = rsp_params->manip;
attr->num_ifs = le16_to_cpu(rsp_params->num_ifs);
attr->mem_size = le16_to_cpu(rsp_params->mem_size);
+ attr->default_if = le16_to_cpu(rsp_params->default_if);
return 0;
}
diff --git a/drivers/net/dpaa2/mc/fsl_dpdmux.h b/drivers/net/dpaa2/mc/fsl_dpdmux.h
index 2f167ee00c..dc067b81cd 100644
--- a/drivers/net/dpaa2/mc/fsl_dpdmux.h
+++ b/drivers/net/dpaa2/mc/fsl_dpdmux.h
@@ -79,6 +79,8 @@ enum dpdmux_method {
* @method: Defines the operation method for the DPDMUX address table
* @manip: Required manipulation operation
* @num_ifs: Number of interfaces (excluding the uplink interface)
+ * @default_if: Default interface number (different from uplink,
+ maximum value num_ifs)
* @adv: Advanced parameters; default is all zeros;
* use this structure to change default settings
* @adv.options: DPDMUX options - combination of 'DPDMUX_OPT_<X>' flags.
@@ -89,16 +91,20 @@ enum dpdmux_method {
* @adv.max_vlan_ids: Maximum vlan ids allowed in the system -
* relevant only case of working in mac+vlan method.
* 0 - indicates default 16 vlan ids.
+ * @adv.mem_size: Size of the memory used for internal buffers expressed as
+ * number of 256byte buffers.
*/
struct dpdmux_cfg {
enum dpdmux_method method;
enum dpdmux_manip manip;
uint16_t num_ifs;
+ uint16_t default_if;
struct {
uint64_t options;
uint16_t max_dmat_entries;
uint16_t max_mc_groups;
uint16_t max_vlan_ids;
+ uint16_t mem_size;
} adv;
};
@@ -130,6 +136,29 @@ int dpdmux_reset(struct fsl_mc_io *mc_io,
uint32_t cmd_flags,
uint16_t token);
+/**
+ *Setting 1 DPDMUX_RESET will not reset default interface
+ */
+#define DPDMUX_SKIP_DEFAULT_INTERFACE 0x01
+/**
+ *Setting 1 DPDMUX_RESET will not reset unicast rules
+ */
+#define DPDMUX_SKIP_UNICAST_RULES 0x02
+/**
+ *Setting 1 DPDMUX_RESET will not reset multicast rules
+ */
+#define DPDMUX_SKIP_MULTICAST_RULES 0x04
+
+int dpdmux_set_resetable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t skip_reset_flags);
+
+int dpdmux_get_resetable(struct fsl_mc_io *mc_io,
+ uint32_t cmd_flags,
+ uint16_t token,
+ uint8_t *skip_reset_flags);
+
/**
* struct dpdmux_attr - Structure representing DPDMUX attributes
* @id: DPDMUX object ID
@@ -138,6 +167,8 @@ int dpdmux_reset(struct fsl_mc_io *mc_io,
* @manip: DPDMUX manipulation type
* @num_ifs: Number of interfaces (excluding the uplink interface)
* @mem_size: DPDMUX frame storage memory size
+ * @default_if: Default interface number (different from uplink,
+ maximum value num_ifs)
*/
struct dpdmux_attr {
int id;
@@ -146,6 +177,7 @@ struct dpdmux_attr {
enum dpdmux_manip manip;
uint16_t num_ifs;
uint16_t mem_size;
+ uint16_t default_if;
};
int dpdmux_get_attributes(struct fsl_mc_io *mc_io,
diff --git a/drivers/net/dpaa2/mc/fsl_dpdmux_cmd.h b/drivers/net/dpaa2/mc/fsl_dpdmux_cmd.h
index b6b8c38c41..2444e9a2e5 100644
--- a/drivers/net/dpaa2/mc/fsl_dpdmux_cmd.h
+++ b/drivers/net/dpaa2/mc/fsl_dpdmux_cmd.h
@@ -55,6 +55,9 @@
#define DPDMUX_CMDID_IF_SET_DEFAULT DPDMUX_CMD(0x0b8)
#define DPDMUX_CMDID_IF_GET_DEFAULT DPDMUX_CMD(0x0b9)
+#define DPDMUX_CMDID_SET_RESETABLE DPDMUX_CMD(0x0ba)
+#define DPDMUX_CMDID_GET_RESETABLE DPDMUX_CMD(0x0bb)
+
#define DPDMUX_MASK(field) \
GENMASK(DPDMUX_##field##_SHIFT + DPDMUX_##field##_SIZE - 1, \
DPDMUX_##field##_SHIFT)
@@ -72,12 +75,13 @@ struct dpdmux_cmd_create {
uint8_t method;
uint8_t manip;
uint16_t num_ifs;
- uint32_t pad;
+ uint16_t default_if;
+ uint16_t pad;
uint16_t adv_max_dmat_entries;
uint16_t adv_max_mc_groups;
uint16_t adv_max_vlan_ids;
- uint16_t pad1;
+ uint16_t mem_size;
uint64_t options;
};
@@ -100,7 +104,7 @@ struct dpdmux_rsp_get_attr {
uint8_t manip;
uint16_t num_ifs;
uint16_t mem_size;
- uint16_t pad;
+ uint16_t default_if;
uint64_t pad1;
@@ -217,5 +221,17 @@ struct dpdmux_cmd_remove_custom_cls_entry {
uint64_t key_iova;
uint64_t mask_iova;
};
+
+#define DPDMUX_SKIP_RESET_FLAGS_SHIFT 0
+#define DPDMUX_SKIP_RESET_FLAGS_SIZE 3
+
+struct dpdmux_cmd_set_skip_reset_flags {
+ uint8_t skip_reset_flags;
+};
+
+struct dpdmux_rsp_get_skip_reset_flags {
+ uint8_t skip_reset_flags;
+};
+
#pragma pack(pop)
#endif /* _FSL_DPDMUX_CMD_H */
--
2.17.1
next prev parent reply other threads:[~2021-02-24 12:44 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-20 14:27 [dpdk-dev] [PATCH 0/7] NXP DPAAx ethernet PMD changes Hemant Agrawal
2021-01-20 14:27 ` [dpdk-dev] [PATCH 1/7] bus/fslmc: fix to use ci value for qbman 5.0 Hemant Agrawal
2021-02-02 11:36 ` Ferruh Yigit
2021-02-04 12:42 ` Hemant Agrawal
2021-01-20 14:27 ` [dpdk-dev] [PATCH 2/7] net/dpaa2: fix link get API implementation Hemant Agrawal
2021-01-20 14:27 ` [dpdk-dev] [PATCH 3/7] net/dpaa2: allocate SGT table from first segment Hemant Agrawal
2021-01-20 14:27 ` [dpdk-dev] [PATCH 4/7] net/dpaa2: support external buffers in Tx Hemant Agrawal
2021-01-20 14:27 ` [dpdk-dev] [PATCH 5/7] net/dpaa: " Hemant Agrawal
2021-01-20 14:27 ` [dpdk-dev] [PATCH 6/7] net/dpaa2: add traffic management driver Hemant Agrawal
2021-02-02 11:41 ` Ferruh Yigit
2021-02-04 10:47 ` Hemant Agrawal
2021-01-20 14:27 ` [dpdk-dev] [PATCH 7/7] net/dpaa2: add support to configure dpdmux max Rx frame len Hemant Agrawal
2021-02-02 11:38 ` Ferruh Yigit
2021-02-04 10:46 ` Hemant Agrawal
2021-01-20 14:27 ` [dpdk-dev] [PATCH 0/7] NXP DPAAx ethernet PMD changes Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 00/20] " Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 01/20] bus/fslmc: fix to use ci value for qbman 5.0 Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 02/20] bus/dpaa: fix statistics reading Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 03/20] net/dpaa2: fix link get API implementation Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 04/20] net/dpaa: " Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 05/20] net/dpaa2: allocate SGT table from first segment Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 06/20] net/dpaa2: support external buffers in Tx Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 07/20] net/dpaa: " Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 08/20] net/dpaa2: add traffic management driver Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 09/20] net/dpaa2: add support to configure dpdmux max Rx frame len Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 10/20] net/dpaa2: add support for raw pattern in dpdmux Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 11/20] net/dpaa2: dpdmux skip reset Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 12/20] net/dpaa2: support dpdmux to not drop parse err pkts Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 13/20] net/dpaa2: add device args for enable Tx confirmation Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 14/20] net/dpaa2: optionally enable error queues Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 15/20] mempool/dpaa2: support stats for secondary process Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 16/20] net/dpaa: do not release the cgr ranges Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 17/20] net/dpaa: prevent multiple mp config on an device Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 18/20] bus/dpaa: secondary process init support Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 19/20] bus/dpaa: support shared ethernet MAC interface Hemant Agrawal
2021-02-11 14:16 ` [dpdk-dev] [PATCH v2 20/20] bus/dpaa: enhance checks for bus and device detection Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 00/23] NXP DPAAx ethernet PMD changes Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 01/23] bus/fslmc: fix to use ci value for qbman 5.0 Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 02/23] bus/dpaa: fix statistics reading Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 03/23] net/dpaa2: fix link get API implementation Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 04/23] net/dpaa: " Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 05/23] net/dpaa2: allocate SGT table from first segment Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 06/23] net/dpaa2: support external buffers in Tx Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 07/23] net/dpaa: " Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 08/23] net/dpaa2: add traffic management driver Hemant Agrawal
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 09/23] net/dpaa2: add support to configure dpdmux max Rx frame len Hemant Agrawal
2021-02-24 17:22 ` Ferruh Yigit
2021-02-24 12:42 ` [dpdk-dev] [PATCH v3 10/23] net/dpaa2: add support for raw pattern in dpdmux Hemant Agrawal
2021-02-24 12:42 ` Hemant Agrawal [this message]
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 12/23] net/dpaa2: support dpdmux to not drop parse err pkts Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 13/23] net/dpaa2: add device args for enable Tx confirmation Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 14/23] net/dpaa2: optionally enable error queues Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 15/23] net/dpaa2: change Tx queue congestion settings Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 16/23] mempool/dpaa2: support stats for secondary process Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 17/23] net/dpaa: do not release the cgr ranges Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 18/23] net/dpaa: prevent multiple mp config on an device Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 19/23] bus/dpaa: secondary process init support Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 20/23] bus/dpaa: support shared ethernet MAC interface Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 21/23] bus/dpaa: enhance checks for bus and device detection Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 22/23] net/dpaa2: add Rx buf size support Hemant Agrawal
2021-02-24 12:43 ` [dpdk-dev] [PATCH v3 23/23] net/dpaa: " Hemant Agrawal
2021-02-24 17:23 ` [dpdk-dev] [PATCH v3 00/23] NXP DPAAx ethernet PMD changes Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210224124311.29799-12-hemant.agrawal@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=apeksha.gupta@nxp.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).