From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v3 13/17] net/txgbe: support to update MTU on VF device
Date: Thu, 25 Feb 2021 16:08:57 +0800 [thread overview]
Message-ID: <20210225080901.3645291-14-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210225080901.3645291-1-jiawenwu@trustnetic.com>
Add MTU set operation for VF device.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/nics/features/txgbe_vf.ini | 1 +
drivers/net/txgbe/txgbe_ethdev_vf.c | 36 +++++++++++++++++++++++++++
2 files changed, 37 insertions(+)
diff --git a/doc/guides/nics/features/txgbe_vf.ini b/doc/guides/nics/features/txgbe_vf.ini
index ba1812e17..69304baa9 100644
--- a/doc/guides/nics/features/txgbe_vf.ini
+++ b/doc/guides/nics/features/txgbe_vf.ini
@@ -8,6 +8,7 @@ Link status = Y
Unicast MAC filter = Y
Multicast MAC filter = Y
Rx interrupt = Y
+MTU update = Y
Jumbo frame = Y
Scattered Rx = Y
LRO = Y
diff --git a/drivers/net/txgbe/txgbe_ethdev_vf.c b/drivers/net/txgbe/txgbe_ethdev_vf.c
index b9d55debf..aa1b46766 100644
--- a/drivers/net/txgbe/txgbe_ethdev_vf.c
+++ b/drivers/net/txgbe/txgbe_ethdev_vf.c
@@ -910,6 +910,41 @@ txgbevf_set_default_mac_addr(struct rte_eth_dev *dev,
return 0;
}
+static int
+txgbevf_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct txgbe_hw *hw;
+ uint32_t max_frame = mtu + RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+ struct rte_eth_rxmode *rx_conf = &dev->data->dev_conf.rxmode;
+
+ hw = TXGBE_DEV_HW(dev);
+
+ if (mtu < RTE_ETHER_MIN_MTU ||
+ max_frame > RTE_ETHER_MAX_JUMBO_FRAME_LEN)
+ return -EINVAL;
+
+ /* refuse mtu that requires the support of scattered packets when this
+ * feature has not been enabled before.
+ */
+ if (!(rx_conf->offloads & DEV_RX_OFFLOAD_SCATTER) &&
+ (max_frame + 2 * TXGBE_VLAN_TAG_SIZE >
+ dev->data->min_rx_buf_size - RTE_PKTMBUF_HEADROOM))
+ return -EINVAL;
+
+ /*
+ * When supported by the underlying PF driver, use the TXGBE_VF_SET_MTU
+ * request of the version 2.0 of the mailbox API.
+ * For now, use the TXGBE_VF_SET_LPE request of the version 1.0
+ * of the mailbox API.
+ */
+ if (txgbevf_rlpml_set_vf(hw, max_frame))
+ return -EINVAL;
+
+ /* update max frame size */
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame;
+ return 0;
+}
+
static int
txgbevf_dev_promiscuous_enable(struct rte_eth_dev *dev)
{
@@ -1073,6 +1108,7 @@ static const struct eth_dev_ops txgbevf_eth_dev_ops = {
.allmulticast_enable = txgbevf_dev_allmulticast_enable,
.allmulticast_disable = txgbevf_dev_allmulticast_disable,
.dev_infos_get = txgbevf_dev_info_get,
+ .mtu_set = txgbevf_dev_set_mtu,
.vlan_filter_set = txgbevf_vlan_filter_set,
.vlan_strip_queue_set = txgbevf_vlan_strip_queue_set,
.vlan_offload_set = txgbevf_vlan_offload_set,
--
2.27.0
next prev parent reply other threads:[~2021-02-25 8:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-25 8:08 [dpdk-dev] [PATCH v3 00/17] net/txgbe: add VF driver support Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 01/17] net/txgbe: add ethdev probe and remove for VF device Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 02/17] net/txgbe: add base code for VF driver Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 03/17] net/txgbe: support add and remove VF device MAC address Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 04/17] net/txgbe: get VF device information Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 05/17] net/txgbe: add interrupt operation for VF device Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 06/17] net/txgbe: get link status of " Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 07/17] net/txgbe: add Rx and Tx unit init for " Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 08/17] net/txgbe: add VF device stats and xstats get operation Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 09/17] net/txgbe: add VLAN handle support to VF driver Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 10/17] net/txgbe: add RSS support for VF device Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 11/17] net/txgbe: add VF device promiscuous and allmulticast mode Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 12/17] net/txgbe: support multicast MAC filter for VF driver Jiawen Wu
2021-02-25 8:08 ` Jiawen Wu [this message]
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 14/17] net/txgbe: support register dump on VF device Jiawen Wu
2021-02-25 8:08 ` [dpdk-dev] [PATCH v3 15/17] net/txgbe: start and stop " Jiawen Wu
2021-02-25 8:09 ` [dpdk-dev] [PATCH v3 16/17] net/txgbe: add some supports as PF driver implemented Jiawen Wu
2021-02-25 8:09 ` [dpdk-dev] [PATCH v3 17/17] doc: update release note for txgbe Jiawen Wu
2021-02-26 13:27 ` [dpdk-dev] [PATCH v3 00/17] net/txgbe: add VF driver support Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210225080901.3645291-14-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).