From: Murphy Yang <murphyx.yang@intel.com>
To: dev@dpdk.org
Cc: qiming.yang@intel.com, jia.guo@intel.com, beilei.xing@intel.com,
stevex.yang@intel.com, robinx.zhang@intel.com,
Murphy Yang <murphyx.yang@intel.com>
Subject: [dpdk-dev] [RFC] net/i40e: change the timing of FDIR input set configuration
Date: Mon, 15 Mar 2021 09:01:50 +0000 [thread overview]
Message-ID: <20210315090150.69239-1-murphyx.yang@intel.com> (raw)
The configuration of FDIR input set should not be set
during flow validate. It should be set when flow create.
Signed-off-by: Murphy Yang <murphyx.yang@intel.com>
---
drivers/net/i40e/i40e_ethdev.h | 1 +
drivers/net/i40e/i40e_fdir.c | 88 +++++++++++++++++++++++++++++++
drivers/net/i40e/i40e_flow.c | 95 +++-------------------------------
3 files changed, 96 insertions(+), 88 deletions(-)
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 1e8f5d3a87..c6ec071f44 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -631,6 +631,7 @@ struct i40e_fdir_flow_ext {
uint8_t raw_id;
uint8_t is_vf; /* 1 for VF, 0 for port dev */
uint16_t dst_id; /* VF ID, available when is_vf is 1*/
+ uint64_t input_set;
bool inner_ip; /* If there is inner ip */
enum i40e_fdir_ip_type iip_type; /* ip type for inner ip */
enum i40e_fdir_ip_type oip_type; /* ip type for outer ip */
diff --git a/drivers/net/i40e/i40e_fdir.c b/drivers/net/i40e/i40e_fdir.c
index c572d003cb..af0c00de04 100644
--- a/drivers/net/i40e/i40e_fdir.c
+++ b/drivers/net/i40e/i40e_fdir.c
@@ -1588,6 +1588,83 @@ i40e_flow_set_fdir_flex_msk(struct i40e_pf *pf,
pf->fdir.flex_mask_flag[pctype] = 1;
}
+static int
+i40e_flow_set_fdir_inset(struct i40e_pf *pf,
+ enum i40e_filter_pctype pctype,
+ uint64_t input_set)
+{
+ uint32_t mask_reg[I40E_INSET_MASK_NUM_REG] = {0};
+ struct i40e_hw *hw = I40E_PF_TO_HW(pf);
+ uint64_t inset_reg = 0;
+ int i, num;
+
+ /* Check if the input set is valid */
+ if (i40e_validate_input_set(pctype, RTE_ETH_FILTER_FDIR,
+ input_set) != 0) {
+ PMD_DRV_LOG(ERR, "Invalid input set");
+ return -EINVAL;
+ }
+
+ /* Check if the configuration is conflicted */
+ if (pf->fdir.inset_flag[pctype] &&
+ memcmp(&pf->fdir.input_set[pctype], &input_set, sizeof(uint64_t)))
+ return -1;
+
+ if (pf->fdir.inset_flag[pctype] &&
+ !memcmp(&pf->fdir.input_set[pctype], &input_set, sizeof(uint64_t)))
+ return 0;
+
+ num = i40e_generate_inset_mask_reg(input_set, mask_reg,
+ I40E_INSET_MASK_NUM_REG);
+ if (num < 0)
+ return -EINVAL;
+
+ if (pf->support_multi_driver) {
+ for (i = 0; i < num; i++)
+ if (i40e_read_rx_ctl(hw,
+ I40E_GLQF_FD_MSK(i, pctype)) !=
+ mask_reg[i]) {
+ PMD_DRV_LOG(ERR, "Input set setting is not"
+ " supported with"
+ " `support-multi-driver`"
+ " enabled!");
+ return -EPERM;
+ }
+ for (i = num; i < I40E_INSET_MASK_NUM_REG; i++)
+ if (i40e_read_rx_ctl(hw,
+ I40E_GLQF_FD_MSK(i, pctype)) != 0) {
+ PMD_DRV_LOG(ERR, "Input set setting is not"
+ " supported with"
+ " `support-multi-driver`"
+ " enabled!");
+ return -EPERM;
+ }
+
+ } else {
+ for (i = 0; i < num; i++)
+ i40e_check_write_reg(hw, I40E_GLQF_FD_MSK(i, pctype),
+ mask_reg[i]);
+ /*clear unused mask registers of the pctype */
+ for (i = num; i < I40E_INSET_MASK_NUM_REG; i++)
+ i40e_check_write_reg(hw,
+ I40E_GLQF_FD_MSK(i, pctype), 0);
+ }
+
+ inset_reg |= i40e_translate_input_set_reg(hw->mac.type, input_set);
+
+ i40e_check_write_reg(hw, I40E_PRTQF_FD_INSET(pctype, 0),
+ (uint32_t)(inset_reg & UINT32_MAX));
+ i40e_check_write_reg(hw, I40E_PRTQF_FD_INSET(pctype, 1),
+ (uint32_t)((inset_reg >>
+ I40E_32_BIT_WIDTH) & UINT32_MAX));
+
+ I40E_WRITE_FLUSH(hw);
+
+ pf->fdir.input_set[pctype] = input_set;
+ pf->fdir.inset_flag[pctype] = 1;
+ return 0;
+}
+
static inline unsigned char *
i40e_find_available_buffer(struct rte_eth_dev *dev)
{
@@ -1686,6 +1763,17 @@ i40e_flow_add_del_fdir_filter(struct rte_eth_dev *dev,
if (add) {
if (filter->input.flow_ext.is_flex_flow) {
+ ret = i40e_flow_set_fdir_inset(pf, pctype,
+ filter->input.flow_ext.input_set);
+ if (ret == -1) {
+ PMD_DRV_LOG(ERR, "Conflict with the"
+ " first rule's input set.");
+ return -EINVAL;
+ } else if (ret == -EINVAL) {
+ PMD_DRV_LOG(ERR, "Invalid pattern mask.");
+ return -EINVAL;
+ }
+
for (i = 0; i < filter->input.flow_ext.raw_id; i++) {
layer_idx = filter->input.flow_ext.layer_idx;
field_idx = layer_idx * I40E_MAX_FLXPLD_FIED + i;
diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c
index 3e514d5f38..d1d14c5ae3 100644
--- a/drivers/net/i40e/i40e_flow.c
+++ b/drivers/net/i40e/i40e_flow.c
@@ -2243,83 +2243,6 @@ i40e_flow_check_raw_item(const struct rte_flow_item *item,
return 0;
}
-static int
-i40e_flow_set_fdir_inset(struct i40e_pf *pf,
- enum i40e_filter_pctype pctype,
- uint64_t input_set)
-{
- struct i40e_hw *hw = I40E_PF_TO_HW(pf);
- uint64_t inset_reg = 0;
- uint32_t mask_reg[I40E_INSET_MASK_NUM_REG] = {0};
- int i, num;
-
- /* Check if the input set is valid */
- if (i40e_validate_input_set(pctype, RTE_ETH_FILTER_FDIR,
- input_set) != 0) {
- PMD_DRV_LOG(ERR, "Invalid input set");
- return -EINVAL;
- }
-
- /* Check if the configuration is conflicted */
- if (pf->fdir.inset_flag[pctype] &&
- memcmp(&pf->fdir.input_set[pctype], &input_set, sizeof(uint64_t)))
- return -1;
-
- if (pf->fdir.inset_flag[pctype] &&
- !memcmp(&pf->fdir.input_set[pctype], &input_set, sizeof(uint64_t)))
- return 0;
-
- num = i40e_generate_inset_mask_reg(input_set, mask_reg,
- I40E_INSET_MASK_NUM_REG);
- if (num < 0)
- return -EINVAL;
-
- if (pf->support_multi_driver) {
- for (i = 0; i < num; i++)
- if (i40e_read_rx_ctl(hw,
- I40E_GLQF_FD_MSK(i, pctype)) !=
- mask_reg[i]) {
- PMD_DRV_LOG(ERR, "Input set setting is not"
- " supported with"
- " `support-multi-driver`"
- " enabled!");
- return -EPERM;
- }
- for (i = num; i < I40E_INSET_MASK_NUM_REG; i++)
- if (i40e_read_rx_ctl(hw,
- I40E_GLQF_FD_MSK(i, pctype)) != 0) {
- PMD_DRV_LOG(ERR, "Input set setting is not"
- " supported with"
- " `support-multi-driver`"
- " enabled!");
- return -EPERM;
- }
-
- } else {
- for (i = 0; i < num; i++)
- i40e_check_write_reg(hw, I40E_GLQF_FD_MSK(i, pctype),
- mask_reg[i]);
- /*clear unused mask registers of the pctype */
- for (i = num; i < I40E_INSET_MASK_NUM_REG; i++)
- i40e_check_write_reg(hw,
- I40E_GLQF_FD_MSK(i, pctype), 0);
- }
-
- inset_reg |= i40e_translate_input_set_reg(hw->mac.type, input_set);
-
- i40e_check_write_reg(hw, I40E_PRTQF_FD_INSET(pctype, 0),
- (uint32_t)(inset_reg & UINT32_MAX));
- i40e_check_write_reg(hw, I40E_PRTQF_FD_INSET(pctype, 1),
- (uint32_t)((inset_reg >>
- I40E_32_BIT_WIDTH) & UINT32_MAX));
-
- I40E_WRITE_FLUSH(hw);
-
- pf->fdir.input_set[pctype] = input_set;
- pf->fdir.inset_flag[pctype] = 1;
- return 0;
-}
-
static uint8_t
i40e_flow_fdir_get_pctype_value(struct i40e_pf *pf,
enum rte_flow_item_type item_type,
@@ -3212,18 +3135,14 @@ i40e_flow_parse_fdir_pattern(struct rte_eth_dev *dev,
/* If customized pctype is not used, set fdir configuration.*/
if (!filter->input.flow_ext.customized_pctype) {
- ret = i40e_flow_set_fdir_inset(pf, pctype, input_set);
- if (ret == -1) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, item,
- "Conflict with the first rule's input set.");
- return -rte_errno;
- } else if (ret == -EINVAL) {
- rte_flow_error_set(error, EINVAL,
- RTE_FLOW_ERROR_TYPE_ITEM, item,
- "Invalid pattern mask.");
- return -rte_errno;
+ /* Check if the input set is valid */
+ if (i40e_validate_input_set(pctype, RTE_ETH_FILTER_FDIR,
+ input_set) != 0) {
+ PMD_DRV_LOG(ERR, "Invalid input set");
+ return -EINVAL;
}
+
+ filter->input.flow_ext.input_set = input_set;
}
filter->input.pctype = pctype;
--
2.17.1
next reply other threads:[~2021-03-15 9:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-15 9:01 Murphy Yang [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-11-10 8:35 Chenxu Di
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210315090150.69239-1-murphyx.yang@intel.com \
--to=murphyx.yang@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=jia.guo@intel.com \
--cc=qiming.yang@intel.com \
--cc=robinx.zhang@intel.com \
--cc=stevex.yang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).