From: Maxime Coquelin <maxime.coquelin@redhat.com>
To: dev@dpdk.org, chenbo.xia@intel.com, amorenoz@redhat.com,
david.marchand@redhat.com, olivier.matz@6wind.com,
bnemeth@redhat.com
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Subject: [dpdk-dev] [PATCH v3 3/4] net/virtio: allocate fake mbuf in Rx queue
Date: Mon, 15 Mar 2021 17:46:18 +0100 [thread overview]
Message-ID: <20210315164619.372575-4-maxime.coquelin@redhat.com> (raw)
In-Reply-To: <20210315164619.372575-1-maxime.coquelin@redhat.com>
While it is worth clarifying whether the fake mbuf
in virtnet_rx struct is really necessary, it is sure
that it heavily impacts cache usage by being part of
the struct. Indeed, it uses two cachelines, and
requires alignment on a cacheline.
Before this series, it means it took 120 bytes in
virtnet_rx struct:
struct virtnet_rx {
struct virtqueue * vq; /* 0 8 */
/* XXX 56 bytes hole, try to pack */
/* --- cacheline 1 boundary (64 bytes) --- */
struct rte_mbuf fake_mbuf __attribute__((__aligned__(64))); /* 64 128 */
/* --- cacheline 3 boundary (192 bytes) --- */
This patch allocates it using malloc in order to optimize
virtnet_rx cache usage and so virtqueue cache usage.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
---
drivers/net/virtio/virtio_ethdev.c | 13 +++++++++++++
drivers/net/virtio/virtio_rxtx.c | 9 +++------
drivers/net/virtio/virtio_rxtx.h | 2 +-
3 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c
index d5643733f7..fda6c141dd 100644
--- a/drivers/net/virtio/virtio_ethdev.c
+++ b/drivers/net/virtio/virtio_ethdev.c
@@ -435,6 +435,7 @@ virtio_init_queue(struct rte_eth_dev *dev, uint16_t queue_idx)
int queue_type = virtio_get_queue_type(hw, queue_idx);
int ret;
int numa_node = dev->device->numa_node;
+ struct rte_mbuf *fake_mbuf = NULL;
PMD_INIT_LOG(INFO, "setting up queue: %u on NUMA node %d",
queue_idx, numa_node);
@@ -550,10 +551,19 @@ virtio_init_queue(struct rte_eth_dev *dev, uint16_t queue_idx)
goto free_hdr_mz;
}
+ fake_mbuf = rte_zmalloc_socket("sw_ring", sizeof(*fake_mbuf),
+ RTE_CACHE_LINE_SIZE, numa_node);
+ if (!fake_mbuf) {
+ PMD_INIT_LOG(ERR, "can not allocate fake mbuf");
+ ret = -ENOMEM;
+ goto free_sw_ring;
+ }
+
vq->sw_ring = sw_ring;
rxvq = &vq->rxq;
rxvq->port_id = dev->data->port_id;
rxvq->mz = mz;
+ rxvq->fake_mbuf = fake_mbuf;
} else if (queue_type == VTNET_TQ) {
txvq = &vq->txq;
txvq->port_id = dev->data->port_id;
@@ -612,6 +622,8 @@ virtio_init_queue(struct rte_eth_dev *dev, uint16_t queue_idx)
clean_vq:
hw->cvq = NULL;
+ rte_free(fake_mbuf);
+free_sw_ring:
rte_free(sw_ring);
free_hdr_mz:
rte_memzone_free(hdr_mz);
@@ -641,6 +653,7 @@ virtio_free_queues(struct virtio_hw *hw)
queue_type = virtio_get_queue_type(hw, i);
if (queue_type == VTNET_RQ) {
+ free(vq->rxq.fake_mbuf);
rte_free(vq->sw_ring);
rte_memzone_free(vq->rxq.mz);
} else if (queue_type == VTNET_TQ) {
diff --git a/drivers/net/virtio/virtio_rxtx.c b/drivers/net/virtio/virtio_rxtx.c
index 32af8d3d11..8df913b0ba 100644
--- a/drivers/net/virtio/virtio_rxtx.c
+++ b/drivers/net/virtio/virtio_rxtx.c
@@ -703,12 +703,9 @@ virtio_dev_rx_queue_setup_finish(struct rte_eth_dev *dev, uint16_t queue_idx)
virtio_rxq_vec_setup(rxvq);
}
- memset(&rxvq->fake_mbuf, 0, sizeof(rxvq->fake_mbuf));
- for (desc_idx = 0; desc_idx < RTE_PMD_VIRTIO_RX_MAX_BURST;
- desc_idx++) {
- vq->sw_ring[vq->vq_nentries + desc_idx] =
- &rxvq->fake_mbuf;
- }
+ memset(rxvq->fake_mbuf, 0, sizeof(*rxvq->fake_mbuf));
+ for (desc_idx = 0; desc_idx < RTE_PMD_VIRTIO_RX_MAX_BURST; desc_idx++)
+ vq->sw_ring[vq->vq_nentries + desc_idx] = rxvq->fake_mbuf;
if (hw->use_vec_rx && !virtio_with_packed_queue(hw)) {
while (vq->vq_free_cnt >= RTE_VIRTIO_VPMD_RX_REARM_THRESH) {
diff --git a/drivers/net/virtio/virtio_rxtx.h b/drivers/net/virtio/virtio_rxtx.h
index 7f1036be6f..6ce5d67d15 100644
--- a/drivers/net/virtio/virtio_rxtx.h
+++ b/drivers/net/virtio/virtio_rxtx.h
@@ -19,7 +19,7 @@ struct virtnet_stats {
struct virtnet_rx {
/* dummy mbuf, for wraparound when processing RX ring. */
- struct rte_mbuf fake_mbuf;
+ struct rte_mbuf *fake_mbuf;
uint64_t mbuf_initializer; /**< value to init mbufs. */
struct rte_mempool *mpool; /**< mempool for mbuf allocation */
--
2.29.2
next prev parent reply other threads:[~2021-03-15 16:46 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-15 16:46 [dpdk-dev] [PATCH v3 0/4] net/virtio: make virtqueue struct cache-friendly Maxime Coquelin
2021-03-15 16:46 ` [dpdk-dev] [PATCH v3 1/4] net/virtio: remove reference to virtqueue in vrings Maxime Coquelin
2021-03-15 16:46 ` [dpdk-dev] [PATCH v3 2/4] net/virtio: improve queue init error path Maxime Coquelin
2021-03-15 16:46 ` Maxime Coquelin [this message]
2021-03-15 16:57 ` [dpdk-dev] [PATCH v3 3/4] net/virtio: allocate fake mbuf in Rx queue David Marchand
2021-03-15 17:02 ` Maxime Coquelin
2021-03-15 16:46 ` [dpdk-dev] [PATCH v3 4/4] net/virtio: pack virtqueue struct Maxime Coquelin
2021-03-15 16:59 ` [dpdk-dev] [PATCH v3 0/4] net/virtio: make virtqueue struct cache-friendly David Marchand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210315164619.372575-4-maxime.coquelin@redhat.com \
--to=maxime.coquelin@redhat.com \
--cc=amorenoz@redhat.com \
--cc=bnemeth@redhat.com \
--cc=chenbo.xia@intel.com \
--cc=david.marchand@redhat.com \
--cc=dev@dpdk.org \
--cc=olivier.matz@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).