From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v2 3/7] net/txgbe: move firmware version get function to base code
Date: Tue, 16 Mar 2021 18:51:45 +0800 [thread overview]
Message-ID: <20210316105149.110904-4-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210316105149.110904-1-jiawenwu@trustnetic.com>
Move firmware version get function to base code,
and store firmware version in PHY info.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/base/txgbe_dummy.h | 6 ++++++
drivers/net/txgbe/base/txgbe_hw.c | 4 ++++
drivers/net/txgbe/base/txgbe_phy.c | 12 ++++++++++++
drivers/net/txgbe/base/txgbe_phy.h | 1 +
drivers/net/txgbe/base/txgbe_type.h | 2 ++
drivers/net/txgbe/txgbe_ethdev.c | 5 +----
6 files changed, 26 insertions(+), 4 deletions(-)
diff --git a/drivers/net/txgbe/base/txgbe_dummy.h b/drivers/net/txgbe/base/txgbe_dummy.h
index c9f2e7893..b62501d65 100644
--- a/drivers/net/txgbe/base/txgbe_dummy.h
+++ b/drivers/net/txgbe/base/txgbe_dummy.h
@@ -424,6 +424,11 @@ static inline s32 txgbe_phy_check_link_dummy(struct txgbe_hw *TUP0, u32 *TUP1,
{
return TXGBE_ERR_OPS_DUMMY;
}
+static inline s32 txgbe_get_phy_fw_version_dummy(struct txgbe_hw *TUP0,
+ u32 *TUP1)
+{
+ return TXGBE_ERR_OPS_DUMMY;
+}
static inline s32 txgbe_phy_read_i2c_byte_dummy(struct txgbe_hw *TUP0, u8 TUP1,
u8 TUP2, u8 *TUP3)
{
@@ -628,6 +633,7 @@ static inline void txgbe_init_ops_dummy(struct txgbe_hw *hw)
hw->phy.setup_link = txgbe_phy_setup_link_dummy;
hw->phy.setup_link_speed = txgbe_phy_setup_link_speed_dummy;
hw->phy.check_link = txgbe_phy_check_link_dummy;
+ hw->phy.get_fw_version = txgbe_get_phy_fw_version_dummy;
hw->phy.read_i2c_byte = txgbe_phy_read_i2c_byte_dummy;
hw->phy.write_i2c_byte = txgbe_phy_write_i2c_byte_dummy;
hw->phy.read_i2c_sff8472 = txgbe_phy_read_i2c_sff8472_dummy;
diff --git a/drivers/net/txgbe/base/txgbe_hw.c b/drivers/net/txgbe/base/txgbe_hw.c
index 81efb6444..26562f50d 100644
--- a/drivers/net/txgbe/base/txgbe_hw.c
+++ b/drivers/net/txgbe/base/txgbe_hw.c
@@ -323,6 +323,9 @@ s32 txgbe_init_hw(struct txgbe_hw *hw)
DEBUGFUNC("txgbe_init_hw");
+ /* Get firmware version */
+ hw->phy.get_fw_version(hw, &hw->fw_version);
+
/* Reset the hardware */
status = hw->mac.reset_hw(hw);
if (status == 0 || status == TXGBE_ERR_SFP_NOT_PRESENT) {
@@ -2774,6 +2777,7 @@ s32 txgbe_init_ops_pf(struct txgbe_hw *hw)
phy->write_reg_mdi = txgbe_write_phy_reg_mdi;
phy->setup_link = txgbe_setup_phy_link;
phy->setup_link_speed = txgbe_setup_phy_link_speed;
+ phy->get_fw_version = txgbe_get_phy_fw_version;
phy->read_i2c_byte = txgbe_read_i2c_byte;
phy->write_i2c_byte = txgbe_write_i2c_byte;
phy->read_i2c_sff8472 = txgbe_read_i2c_sff8472;
diff --git a/drivers/net/txgbe/base/txgbe_phy.c b/drivers/net/txgbe/base/txgbe_phy.c
index 37c41099f..1ca6e35a4 100644
--- a/drivers/net/txgbe/base/txgbe_phy.c
+++ b/drivers/net/txgbe/base/txgbe_phy.c
@@ -558,6 +558,18 @@ s32 txgbe_setup_phy_link_speed(struct txgbe_hw *hw,
return 0;
}
+s32 txgbe_get_phy_fw_version(struct txgbe_hw *hw, u32 *fw_version)
+{
+ u16 eeprom_verh, eeprom_verl;
+
+ hw->rom.readw_sw(hw, TXGBE_EEPROM_VERSION_H, &eeprom_verh);
+ hw->rom.readw_sw(hw, TXGBE_EEPROM_VERSION_L, &eeprom_verl);
+
+ *fw_version = (eeprom_verh << 16) | eeprom_verl;
+
+ return 0;
+}
+
/**
* txgbe_get_copper_speeds_supported - Get copper link speeds from phy
* @hw: pointer to hardware structure
diff --git a/drivers/net/txgbe/base/txgbe_phy.h b/drivers/net/txgbe/base/txgbe_phy.h
index 5aec1d28f..4a5b90077 100644
--- a/drivers/net/txgbe/base/txgbe_phy.h
+++ b/drivers/net/txgbe/base/txgbe_phy.h
@@ -340,6 +340,7 @@ s32 txgbe_setup_phy_link(struct txgbe_hw *hw);
s32 txgbe_setup_phy_link_speed(struct txgbe_hw *hw,
u32 speed,
bool autoneg_wait_to_complete);
+s32 txgbe_get_phy_fw_version(struct txgbe_hw *hw, u32 *fw_version);
s32 txgbe_get_copper_link_capabilities(struct txgbe_hw *hw,
u32 *speed,
bool *autoneg);
diff --git a/drivers/net/txgbe/base/txgbe_type.h b/drivers/net/txgbe/base/txgbe_type.h
index 008fcb25b..89d68d81f 100644
--- a/drivers/net/txgbe/base/txgbe_type.h
+++ b/drivers/net/txgbe/base/txgbe_type.h
@@ -647,6 +647,7 @@ struct txgbe_phy_info {
s32 (*setup_link_speed)(struct txgbe_hw *hw, u32 speed,
bool autoneg_wait_to_complete);
s32 (*check_link)(struct txgbe_hw *hw, u32 *speed, bool *link_up);
+ s32 (*get_fw_version)(struct txgbe_hw *hw, u32 *fw_version);
s32 (*read_i2c_byte)(struct txgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data);
s32 (*write_i2c_byte)(struct txgbe_hw *hw, u8 byte_offset,
@@ -783,6 +784,7 @@ struct txgbe_hw {
u16 nb_rx_queues;
u16 nb_tx_queues;
+ u32 fw_version;
u32 mode;
enum txgbe_link_status {
TXGBE_LINK_STATUS_NONE = 0,
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index cc7270a1c..f951ecf4d 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -2570,14 +2570,11 @@ static int
txgbe_fw_version_get(struct rte_eth_dev *dev, char *fw_version, size_t fw_size)
{
struct txgbe_hw *hw = TXGBE_DEV_HW(dev);
- u16 eeprom_verh, eeprom_verl;
u32 etrack_id;
int ret;
- hw->rom.readw_sw(hw, TXGBE_EEPROM_VERSION_H, &eeprom_verh);
- hw->rom.readw_sw(hw, TXGBE_EEPROM_VERSION_L, &eeprom_verl);
+ hw->phy.get_fw_version(hw, &etrack_id);
- etrack_id = (eeprom_verh << 16) | eeprom_verl;
ret = snprintf(fw_version, fw_size, "0x%08x", etrack_id);
ret += 1; /* add the size of '\0' */
--
2.27.0
next prev parent reply other threads:[~2021-03-16 10:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 10:51 [dpdk-dev] [PATCH v2 0/7] txgbe backplane AN training Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 1/7] net/txgbe: update device ID Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 2/7] net/txgbe: add device arguments Jiawen Wu
2021-03-24 10:59 ` Ferruh Yigit
2021-03-24 11:01 ` Ferruh Yigit
2021-03-16 10:51 ` Jiawen Wu [this message]
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 4/7] net/txgbe: update link setup process of backplane NICs Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 5/7] net/txgbe/base: support to handle backplane AN73 flow Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 6/7] net/txgbe: handle AN interrupt and link update Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 7/7] net/txgbe: add FFE parameters for user debugging Jiawen Wu
2021-03-23 17:33 ` [dpdk-dev] [PATCH v2 0/7] txgbe backplane AN training Ferruh Yigit
2021-03-24 1:57 ` Jiawen Wu
2021-03-24 10:36 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316105149.110904-4-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).