From: Jiawen Wu <jiawenwu@trustnetic.com>
To: dev@dpdk.org
Cc: Jiawen Wu <jiawenwu@trustnetic.com>
Subject: [dpdk-dev] [PATCH v2 5/7] net/txgbe/base: support to handle backplane AN73 flow
Date: Tue, 16 Mar 2021 18:51:47 +0800 [thread overview]
Message-ID: <20210316105149.110904-6-jiawenwu@trustnetic.com> (raw)
In-Reply-To: <20210316105149.110904-1-jiawenwu@trustnetic.com>
Suppot to handle the interrupt of auto-negotiation, improve the
link training process of connecting with other switches.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/base/txgbe_hw.c | 3 +
drivers/net/txgbe/base/txgbe_phy.c | 461 +++++++++++++++++++++++++++-
drivers/net/txgbe/base/txgbe_phy.h | 5 +
drivers/net/txgbe/base/txgbe_type.h | 9 +
4 files changed, 476 insertions(+), 2 deletions(-)
diff --git a/drivers/net/txgbe/base/txgbe_hw.c b/drivers/net/txgbe/base/txgbe_hw.c
index 521cb4650..9a82a329a 100644
--- a/drivers/net/txgbe/base/txgbe_hw.c
+++ b/drivers/net/txgbe/base/txgbe_hw.c
@@ -2574,6 +2574,9 @@ s32 txgbe_init_phy_raptor(struct txgbe_hw *hw)
txgbe_get_copper_link_capabilities;
}
+ if (phy->media_type == txgbe_media_type_backplane)
+ mac->kr_handle = txgbe_kr_handle;
+
/* Set necessary function pointers based on PHY type */
switch (hw->phy.type) {
case txgbe_phy_tn:
diff --git a/drivers/net/txgbe/base/txgbe_phy.c b/drivers/net/txgbe/base/txgbe_phy.c
index 33d3839ed..140857121 100644
--- a/drivers/net/txgbe/base/txgbe_phy.c
+++ b/drivers/net/txgbe/base/txgbe_phy.c
@@ -9,6 +9,17 @@
static void txgbe_i2c_start(struct txgbe_hw *hw);
static void txgbe_i2c_stop(struct txgbe_hw *hw);
+static s32 txgbe_handle_bp_flow(u32 link_mode, struct txgbe_hw *hw);
+static void txgbe_get_bp_ability(struct txgbe_backplane_ability *ability,
+ u32 link_partner, struct txgbe_hw *hw);
+static s32 txgbe_check_bp_ability(struct txgbe_backplane_ability *local_ability,
+ struct txgbe_backplane_ability *lp_ability, struct txgbe_hw *hw);
+static void txgbe_clear_bp_intr(u32 bit, u32 bit_high, struct txgbe_hw *hw);
+static s32 txgbe_enable_kr_training(struct txgbe_hw *hw);
+static s32 txgbe_disable_kr_training(struct txgbe_hw *hw, s32 post, s32 mode);
+static s32 txgbe_check_kr_training(struct txgbe_hw *hw);
+static void txgbe_read_phy_lane_tx_eq(u16 lane, struct txgbe_hw *hw,
+ s32 post, s32 mode);
static s32 txgbe_set_link_to_sfi(struct txgbe_hw *hw, u32 speed);
/**
@@ -1399,7 +1410,7 @@ static void txgbe_i2c_stop(struct txgbe_hw *hw)
wr32(hw, TXGBE_I2CENA, 0);
}
-static s32
+static void
txgbe_set_sgmii_an37_ability(struct txgbe_hw *hw)
{
u32 value;
@@ -1410,7 +1421,6 @@ txgbe_set_sgmii_an37_ability(struct txgbe_hw *hw)
value = rd32_epcs(hw, SR_MII_MMD_CTL);
value = (value & ~0x1200) | (0x1 << 12) | (0x1 << 9);
wr32_epcs(hw, SR_MII_MMD_CTL, value);
- return 0;
}
static s32
@@ -2294,3 +2304,450 @@ void txgbe_autoc_write(struct txgbe_hw *hw, u64 autoc)
mactxcfg | TXGBE_MACTXCFG_TXE);
}
+/**
+ * txgbe_kr_handle - Handle the interrupt of auto-negotiation
+ * @hw: pointer to hardware structure
+ */
+s32 txgbe_kr_handle(struct txgbe_hw *hw)
+{
+ u32 value;
+ s32 status = 0;
+
+ DEBUGFUNC("txgbe_kr_handle");
+
+ value = rd32_epcs(hw, VR_AN_INTR);
+ BP_LOG("AN INTERRUPT!! value: 0x%x\n", value);
+ if (!(value & VR_AN_INTR_PG_RCV)) {
+ wr32_epcs(hw, VR_AN_INTR, 0);
+ return status;
+ }
+
+ status = txgbe_handle_bp_flow(0, hw);
+
+ return status;
+}
+
+/**
+ * txgbe_handle_bp_flow - Handle backplane AN73 flow
+ * @hw: pointer to hardware structure
+ * @link_mode: local AN73 link mode
+ */
+static s32 txgbe_handle_bp_flow(u32 link_mode, struct txgbe_hw *hw)
+{
+ u32 value, i, lp_reg, ld_reg;
+ s32 status = 0;
+ struct txgbe_backplane_ability local_ability, lp_ability;
+
+ DEBUGFUNC("txgbe_handle_bp_flow");
+
+ local_ability.current_link_mode = link_mode;
+
+ /* 1. Get the local AN73 Base Page Ability */
+ BP_LOG("<1>. Get the local AN73 Base Page Ability ...\n");
+ txgbe_get_bp_ability(&local_ability, 0, hw);
+
+ /* 2. Check and clear the AN73 Interrupt Status */
+ BP_LOG("<2>. Check the AN73 Interrupt Status ...\n");
+ txgbe_clear_bp_intr(2, 0, hw);
+
+ /* 3.1. Get the link partner AN73 Base Page Ability */
+ BP_LOG("<3.1>. Get the link partner AN73 Base Page Ability ...\n");
+ txgbe_get_bp_ability(&lp_ability, 1, hw);
+
+ /* 3.2. Check the AN73 Link Ability with Link Partner */
+ BP_LOG("<3.2>. Check the AN73 Link Ability with Link Partner ...\n");
+ BP_LOG(" Local Link Ability: 0x%x\n", local_ability.link_ability);
+ BP_LOG(" Link Partner Link Ability: 0x%x\n", lp_ability.link_ability);
+
+ status = txgbe_check_bp_ability(&local_ability, &lp_ability, hw);
+
+ wr32_epcs(hw, SR_AN_CTRL, 0);
+ wr32_epcs(hw, VR_AN_KR_MODE_CL, 0);
+
+ /* 3.3. Check the FEC and KR Training for KR mode */
+ BP_LOG("<3.3>. Check the FEC for KR mode ...\n");
+ if ((local_ability.fec_ability & lp_ability.fec_ability) == 0x03) {
+ BP_LOG("Enable the Backplane KR FEC ...\n");
+ wr32_epcs(hw, SR_PMA_KR_FEC_CTRL, SR_PMA_KR_FEC_CTRL_EN);
+ } else {
+ BP_LOG("Backplane KR FEC is disabled.\n");
+ }
+
+ printf("Enter training.\n");
+ /* CL72 KR training on */
+ for (i = 0; i < 2; i++) {
+ /* 3.4. Check the CL72 KR Training for KR mode */
+ BP_LOG("<3.4>. Check the CL72 KR Training for KR mode ...\n");
+ BP_LOG("==================%d==================\n", i);
+ status = txgbe_enable_kr_training(hw);
+ BP_LOG("Check the Clause 72 KR Training status ...\n");
+ status |= txgbe_check_kr_training(hw);
+
+ lp_reg = rd32_epcs(hw, SR_PMA_KR_LP_CESTS);
+ lp_reg &= SR_PMA_KR_LP_CESTS_RR;
+ BP_LOG("SR PMA MMD 10GBASE-KR LP Coefficient Status Register: 0x%x\n",
+ lp_reg);
+ ld_reg = rd32_epcs(hw, SR_PMA_KR_LD_CESTS);
+ ld_reg &= SR_PMA_KR_LD_CESTS_RR;
+ BP_LOG("SR PMA MMD 10GBASE-KR LD Coefficient Status Register: 0x%x\n",
+ ld_reg);
+ if (hw->devarg.poll == 0 && status != 0)
+ lp_reg = SR_PMA_KR_LP_CESTS_RR;
+
+ if (lp_reg & ld_reg) {
+ BP_LOG("==================out==================\n");
+ status = txgbe_disable_kr_training(hw, 0, 0);
+ wr32_epcs(hw, SR_AN_CTRL, 0);
+ txgbe_clear_bp_intr(2, 0, hw);
+ txgbe_clear_bp_intr(1, 0, hw);
+ txgbe_clear_bp_intr(0, 0, hw);
+ for (i = 0; i < 10; i++) {
+ value = rd32_epcs(hw, SR_XS_PCS_KR_STS1);
+ if (value & SR_XS_PCS_KR_STS1_PLU) {
+ BP_LOG("\nINT_AN_INT_CMPLT =1, AN73 Done Success.\n");
+ wr32_epcs(hw, SR_AN_CTRL, 0);
+ return 0;
+ }
+ msec_delay(10);
+ }
+ msec_delay(1000);
+ txgbe_set_link_to_kr(hw, 0);
+
+ return 0;
+ }
+
+ status |= txgbe_disable_kr_training(hw, 0, 0);
+ }
+
+ txgbe_clear_bp_intr(2, 0, hw);
+ txgbe_clear_bp_intr(1, 0, hw);
+ txgbe_clear_bp_intr(0, 0, hw);
+
+ return status;
+}
+
+/**
+ * txgbe_get_bp_ability
+ * @hw: pointer to hardware structure
+ * @ability: pointer to blackplane ability structure
+ * @link_partner:
+ * 1: Get Link Partner Base Page
+ * 2: Get Link Partner Next Page
+ * (only get NXP Ability Register 1 at the moment)
+ * 0: Get Local Device Base Page
+ */
+static void txgbe_get_bp_ability(struct txgbe_backplane_ability *ability,
+ u32 link_partner, struct txgbe_hw *hw)
+{
+ u32 value = 0;
+
+ DEBUGFUNC("txgbe_get_bp_ability");
+
+ /* Link Partner Base Page */
+ if (link_partner == 1) {
+ /* Read the link partner AN73 Base Page Ability Registers */
+ BP_LOG("Read the link partner AN73 Base Page Ability Registers...\n");
+ value = rd32_epcs(hw, SR_AN_MMD_LP_ABL1);
+ BP_LOG("SR AN MMD LP Base Page Ability Register 1: 0x%x\n",
+ value);
+ ability->next_page = SR_MMD_LP_ABL1_ADV_NP(value);
+ BP_LOG(" Next Page (bit15): %d\n", ability->next_page);
+
+ value = rd32_epcs(hw, SR_AN_MMD_LP_ABL2);
+ BP_LOG("SR AN MMD LP Base Page Ability Register 2: 0x%x\n",
+ value);
+ ability->link_ability =
+ value & SR_AN_MMD_LP_ABL2_BP_TYPE_KR_KX4_KX;
+ BP_LOG(" Link Ability (bit[15:0]): 0x%x\n",
+ ability->link_ability);
+ BP_LOG(" (0x20- KX_ONLY, 0x40- KX4_ONLY, 0x60- KX4_KX\n");
+ BP_LOG(" 0x80- KR_ONLY, 0xA0- KR_KX, 0xC0- KR_KX4, 0xE0- KR_KX4_KX)\n");
+
+ value = rd32_epcs(hw, SR_AN_MMD_LP_ABL3);
+ BP_LOG("SR AN MMD LP Base Page Ability Register 3: 0x%x\n",
+ value);
+ BP_LOG(" FEC Request (bit15): %d\n", ((value >> 15) & 0x01));
+ BP_LOG(" FEC Enable (bit14): %d\n", ((value >> 14) & 0x01));
+ ability->fec_ability = SR_AN_MMD_LP_ABL3_FCE(value);
+ } else if (link_partner == 2) {
+ /* Read the link partner AN73 Next Page Ability Registers */
+ BP_LOG("\nRead the link partner AN73 Next Page Ability Registers...\n");
+ value = rd32_epcs(hw, SR_AN_LP_XNP_ABL1);
+ BP_LOG(" SR AN MMD LP XNP Ability Register 1: 0x%x\n", value);
+ ability->next_page = SR_AN_LP_XNP_ABL1_NP(value);
+ BP_LOG(" Next Page (bit15): %d\n", ability->next_page);
+ } else {
+ /* Read the local AN73 Base Page Ability Registers */
+ BP_LOG("Read the local AN73 Base Page Ability Registers...\n");
+ value = rd32_epcs(hw, SR_AN_MMD_ADV_REG1);
+ BP_LOG("SR AN MMD Advertisement Register 1: 0x%x\n", value);
+ ability->next_page = SR_AN_MMD_ADV_REG1_NP(value);
+ BP_LOG(" Next Page (bit15): %d\n", ability->next_page);
+
+ value = rd32_epcs(hw, SR_AN_MMD_ADV_REG2);
+ BP_LOG("SR AN MMD Advertisement Register 2: 0x%x\n", value);
+ ability->link_ability =
+ value & SR_AN_MMD_ADV_REG2_BP_TYPE_KR_KX4_KX;
+ BP_LOG(" Link Ability (bit[15:0]): 0x%x\n",
+ ability->link_ability);
+ BP_LOG(" (0x20- KX_ONLY, 0x40- KX4_ONLY, 0x60- KX4_KX\n");
+ BP_LOG(" 0x80- KR_ONLY, 0xA0- KR_KX, 0xC0- KR_KX4, 0xE0- KR_KX4_KX)\n");
+
+ value = rd32_epcs(hw, SR_AN_MMD_ADV_REG3);
+ BP_LOG("SR AN MMD Advertisement Register 3: 0x%x\n", value);
+ BP_LOG(" FEC Request (bit15): %d\n", ((value >> 15) & 0x01));
+ BP_LOG(" FEC Enable (bit14): %d\n", ((value >> 14) & 0x01));
+ ability->fec_ability = SR_AN_MMD_ADV_REG3_FCE(value);
+ }
+
+ BP_LOG("done.\n");
+}
+
+/**
+ * txgbe_check_bp_ability
+ * @hw: pointer to hardware structure
+ * @ability: pointer to blackplane ability structure
+ */
+static s32 txgbe_check_bp_ability(struct txgbe_backplane_ability *local_ability,
+ struct txgbe_backplane_ability *lp_ability, struct txgbe_hw *hw)
+{
+ u32 com_link_abi;
+ s32 ret = 0;
+
+ DEBUGFUNC("txgbe_check_bp_ability");
+
+ com_link_abi = local_ability->link_ability & lp_ability->link_ability;
+ BP_LOG("com_link_abi = 0x%x, local_ability = 0x%x, lp_ability = 0x%x\n",
+ com_link_abi, local_ability->link_ability,
+ lp_ability->link_ability);
+
+ if (!com_link_abi) {
+ BP_LOG("The Link Partner does not support any compatible speed mode.\n");
+ ret = -1;
+ } else if (com_link_abi & BP_TYPE_KR) {
+ if (local_ability->current_link_mode) {
+ BP_LOG("Link mode is not matched with Link Partner: [LINK_KR].\n");
+ BP_LOG("Set the local link mode to [LINK_KR] ...\n");
+ txgbe_set_link_to_kr(hw, 0);
+ ret = 1;
+ } else {
+ BP_LOG("Link mode is matched with Link Partner: [LINK_KR].\n");
+ ret = 0;
+ }
+ } else if (com_link_abi & BP_TYPE_KX4) {
+ if (local_ability->current_link_mode == 0x10) {
+ BP_LOG("Link mode is matched with Link Partner: [LINK_KX4].\n");
+ ret = 0;
+ } else {
+ BP_LOG("Link mode is not matched with Link Partner: [LINK_KX4].\n");
+ BP_LOG("Set the local link mode to [LINK_KX4] ...\n");
+ txgbe_set_link_to_kx4(hw, 1);
+ ret = 1;
+ }
+ } else if (com_link_abi & BP_TYPE_KX) {
+ if (local_ability->current_link_mode == 0x1) {
+ BP_LOG("Link mode is matched with Link Partner: [LINK_KX].\n");
+ ret = 0;
+ } else {
+ BP_LOG("Link mode is not matched with Link Partner: [LINK_KX].\n");
+ BP_LOG("Set the local link mode to [LINK_KX] ...\n");
+ txgbe_set_link_to_kx(hw, 1, 1);
+ ret = 1;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * txgbe_clear_bp_intr
+ * @hw: pointer to hardware structure
+ * @index: the bit will be cleared
+ * @index_high:
+ * index_high = 0: Only the index bit will be cleared
+ * index_high != 0: the [index_high, index] range will be cleared
+ */
+static void txgbe_clear_bp_intr(u32 bit, u32 bit_high, struct txgbe_hw *hw)
+{
+ u32 rdata = 0, wdata, i;
+
+ DEBUGFUNC("txgbe_clear_bp_intr");
+
+ rdata = rd32_epcs(hw, VR_AN_INTR);
+ BP_LOG("[Before clear]Read VR AN MMD Interrupt Register: 0x%x\n",
+ rdata);
+ BP_LOG("Interrupt: 0- AN_INT_CMPLT, 1- AN_INC_LINK, 2- AN_PG_RCV\n\n");
+
+ wdata = rdata;
+ if (bit_high) {
+ for (i = bit; i <= bit_high; i++)
+ wdata &= ~(1 << i);
+ } else {
+ wdata &= ~(1 << bit);
+ }
+
+ wr32_epcs(hw, VR_AN_INTR, wdata);
+
+ rdata = rd32_epcs(hw, VR_AN_INTR);
+ BP_LOG("[After clear]Read VR AN MMD Interrupt Register: 0x%x\n", rdata);
+}
+
+static s32 txgbe_enable_kr_training(struct txgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 value = 0;
+
+ DEBUGFUNC("txgbe_enable_kr_training");
+
+ BP_LOG("Enable Clause 72 KR Training ...\n");
+
+ if (CL72_KRTR_PRBS_MODE_EN != 0xFFFF) {
+ /* Set PRBS Timer Duration Control to maximum 6.7ms in
+ * VR_PMA_KRTR_PRBS_CTRL2 Register
+ */
+ value = CL72_KRTR_PRBS_MODE_EN;
+ wr32_epcs(hw, VR_PMA_KRTR_PRBS_CTRL2, value);
+ /* Set PRBS Timer Duration Control to maximum 6.7ms in
+ * VR_PMA_KRTR_PRBS_CTRL1 Register
+ */
+ wr32_epcs(hw, VR_PMA_KRTR_PRBS_CTRL1,
+ VR_PMA_KRTR_PRBS_TIME_LMT);
+ /* Enable PRBS Mode to determine KR Training Status by setting
+ * Bit 0 of VR_PMA_KRTR_PRBS_CTRL0 Register
+ */
+ value = VR_PMA_KRTR_PRBS_MODE_EN;
+ }
+#ifdef CL72_KRTR_PRBS31_EN
+ /* Enable PRBS Mode to determine KR Training Status by setting
+ * Bit 1 of VR_PMA_KRTR_PRBS_CTRL0 Register
+ */
+ value = VR_PMA_KRTR_PRBS31_EN;
+#endif
+ wr32_epcs(hw, VR_PMA_KRTR_PRBS_CTRL0, value);
+ /* Read PHY Lane0 TX EQ before Clause 72 KR Training. */
+ txgbe_read_phy_lane_tx_eq(0, hw, 0, 0);
+
+ /* Enable the Clause 72 start-up protocol
+ * by setting Bit 1 of SR_PMA_KR_PMD_CTRL Register.
+ * Restart the Clause 72 start-up protocol
+ * by setting Bit 0 of SR_PMA_KR_PMD_CTRL Register.
+ */
+ wr32_epcs(hw, SR_PMA_KR_PMD_CTRL,
+ SR_PMA_KR_PMD_CTRL_EN_TR | SR_PMA_KR_PMD_CTRL_RS_TR);
+
+ return status;
+}
+
+static s32 txgbe_disable_kr_training(struct txgbe_hw *hw, s32 post, s32 mode)
+{
+ s32 status = 0;
+
+ DEBUGFUNC("txgbe_disable_kr_training");
+
+ BP_LOG("Disable Clause 72 KR Training ...\n");
+ /* Read PHY Lane0 TX EQ before Clause 72 KR Training. */
+ txgbe_read_phy_lane_tx_eq(0, hw, post, mode);
+
+ wr32_epcs(hw, SR_PMA_KR_PMD_CTRL, SR_PMA_KR_PMD_CTRL_RS_TR);
+
+ return status;
+}
+
+static s32 txgbe_check_kr_training(struct txgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 value, test;
+ int i;
+ int times = hw->devarg.poll ? 35 : 20;
+
+ DEBUGFUNC("txgbe_check_kr_training");
+
+ for (i = 0; i < times; i++) {
+ value = rd32_epcs(hw, SR_PMA_KR_LP_CEU);
+ BP_LOG("SR PMA MMD 10GBASE-KR LP Coefficient Update Register: 0x%x\n",
+ value);
+ value = rd32_epcs(hw, SR_PMA_KR_LP_CESTS);
+ BP_LOG("SR PMA MMD 10GBASE-KR LP Coefficient Status Register: 0x%x\n",
+ value);
+ value = rd32_epcs(hw, SR_PMA_KR_LD_CEU);
+ BP_LOG("SR PMA MMD 10GBASE-KR LD Coefficient Update: 0x%x\n",
+ value);
+ value = rd32_epcs(hw, SR_PMA_KR_LD_CESTS);
+ BP_LOG("SR PMA MMD 10GBASE-KR LD Coefficient Status: 0x%x\n",
+ value);
+ value = rd32_epcs(hw, SR_PMA_KR_PMD_STS);
+ BP_LOG("SR PMA MMD 10GBASE-KR Status Register: 0x%x\n", value);
+ BP_LOG(" Training Failure (bit3): %d\n",
+ ((value >> 3) & 0x01));
+ BP_LOG(" Start-Up Protocol Status (bit2): %d\n",
+ ((value >> 2) & 0x01));
+ BP_LOG(" Frame Lock (bit1): %d\n",
+ ((value >> 1) & 0x01));
+ BP_LOG(" Receiver Status (bit0): %d\n",
+ ((value >> 0) & 0x01));
+
+ test = rd32_epcs(hw, SR_PMA_KR_LP_CESTS);
+ if (test & SR_PMA_KR_LP_CESTS_RR) {
+ BP_LOG("TEST Coefficient Status Register: 0x%x\n",
+ test);
+ status = 1;
+ }
+
+ if (value & SR_PMA_KR_PMD_STS_TR_FAIL) {
+ BP_LOG("Training is completed with failure.\n");
+ txgbe_read_phy_lane_tx_eq(0, hw, 0, 0);
+ return 0;
+ }
+
+ if (value & SR_PMA_KR_PMD_STS_RCV) {
+ BP_LOG("Receiver trained and ready to receive data.\n");
+ txgbe_read_phy_lane_tx_eq(0, hw, 0, 0);
+ return 0;
+ }
+
+ msec_delay(20);
+ }
+
+ BP_LOG("ERROR: Check Clause 72 KR Training Complete Timeout.\n");
+ return status;
+}
+
+static void txgbe_read_phy_lane_tx_eq(u16 lane, struct txgbe_hw *hw,
+ s32 post, s32 mode)
+{
+ u32 value = 0;
+ u32 addr;
+ u32 tx_main_cursor, tx_pre_cursor, tx_post_cursor, lmain;
+
+ DEBUGFUNC("txgbe_read_phy_lane_tx_eq");
+
+ addr = TXGBE_PHY_LANE0_TX_EQ_CTL1 | (lane << 8);
+ value = rd32_ephy(hw, addr);
+ BP_LOG("PHY LANE TX EQ Read Value: %x\n", lane);
+ tx_main_cursor = TXGBE_PHY_LANE0_TX_EQ_CTL1_MAIN(value);
+ BP_LOG("TX_MAIN_CURSOR: %x\n", tx_main_cursor);
+ UNREFERENCED_PARAMETER(tx_main_cursor);
+
+ addr = TXGBE_PHY_LANE0_TX_EQ_CTL2 | (lane << 8);
+ value = rd32_ephy(hw, addr);
+ tx_pre_cursor = value & TXGBE_PHY_LANE0_TX_EQ_CTL2_PRE;
+ tx_post_cursor = TXGBE_PHY_LANE0_TX_EQ_CTL2_POST(value);
+ BP_LOG("TX_PRE_CURSOR: %x\n", tx_pre_cursor);
+ BP_LOG("TX_POST_CURSOR: %x\n", tx_post_cursor);
+
+ if (mode == 1) {
+ lmain = 160 - tx_pre_cursor - tx_post_cursor;
+ if (lmain < 88)
+ lmain = 88;
+
+ if (post)
+ tx_post_cursor = post;
+
+ wr32_epcs(hw, TXGBE_PHY_EQ_INIT_CTL1, tx_post_cursor);
+ wr32_epcs(hw, TXGBE_PHY_EQ_INIT_CTL0,
+ tx_pre_cursor | (lmain << 8));
+ value = rd32_epcs(hw, TXGBE_PHY_TX_EQ_CTL1);
+ value &= ~TXGBE_PHY_TX_EQ_CTL1_DEF;
+ wr32_epcs(hw, TXGBE_PHY_TX_EQ_CTL1, value);
+ }
+}
diff --git a/drivers/net/txgbe/base/txgbe_phy.h b/drivers/net/txgbe/base/txgbe_phy.h
index b804d2406..ad4a915f8 100644
--- a/drivers/net/txgbe/base/txgbe_phy.h
+++ b/drivers/net/txgbe/base/txgbe_phy.h
@@ -396,6 +396,10 @@
#define TXGBE_MD_PORT_CTRL 0xF001
#define TXGBE_MD_PORT_CTRL_RESET MS16(14, 0x1)
+#ifndef CL72_KRTR_PRBS_MODE_EN
+#define CL72_KRTR_PRBS_MODE_EN 0xFFFF /* open kr prbs check */
+#endif
+
/******************************************************************************
* SFP I2C Registers:
******************************************************************************/
@@ -450,5 +454,6 @@ s32 txgbe_write_i2c_eeprom(struct txgbe_hw *hw, u8 byte_offset,
u8 eeprom_data);
u64 txgbe_autoc_read(struct txgbe_hw *hw);
void txgbe_autoc_write(struct txgbe_hw *hw, u64 value);
+s32 txgbe_kr_handle(struct txgbe_hw *hw);
#endif /* _TXGBE_PHY_H_ */
diff --git a/drivers/net/txgbe/base/txgbe_type.h b/drivers/net/txgbe/base/txgbe_type.h
index a50e7b154..a1fe7c467 100644
--- a/drivers/net/txgbe/base/txgbe_type.h
+++ b/drivers/net/txgbe/base/txgbe_type.h
@@ -600,6 +600,8 @@ struct txgbe_mac_info {
s32 (*dmac_config)(struct txgbe_hw *hw);
s32 (*setup_eee)(struct txgbe_hw *hw, bool enable_eee);
+ s32 (*kr_handle)(struct txgbe_hw *hw);
+
enum txgbe_mac_type type;
u8 addr[ETH_ADDR_LEN];
u8 perm_addr[ETH_ADDR_LEN];
@@ -811,6 +813,13 @@ struct txgbe_hw {
} qp_last[TXGBE_MAX_QP];
};
+struct txgbe_backplane_ability {
+ u32 next_page; /* Next Page (bit0) */
+ u32 link_ability; /* Link Ability (bit[7:0]) */
+ u32 fec_ability; /* FEC Request (bit1), FEC Enable (bit0) */
+ u32 current_link_mode; /* current link mode for local device */
+};
+
#include "txgbe_regs.h"
#include "txgbe_dummy.h"
--
2.27.0
next prev parent reply other threads:[~2021-03-16 10:52 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 10:51 [dpdk-dev] [PATCH v2 0/7] txgbe backplane AN training Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 1/7] net/txgbe: update device ID Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 2/7] net/txgbe: add device arguments Jiawen Wu
2021-03-24 10:59 ` Ferruh Yigit
2021-03-24 11:01 ` Ferruh Yigit
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 3/7] net/txgbe: move firmware version get function to base code Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 4/7] net/txgbe: update link setup process of backplane NICs Jiawen Wu
2021-03-16 10:51 ` Jiawen Wu [this message]
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 6/7] net/txgbe: handle AN interrupt and link update Jiawen Wu
2021-03-16 10:51 ` [dpdk-dev] [PATCH v2 7/7] net/txgbe: add FFE parameters for user debugging Jiawen Wu
2021-03-23 17:33 ` [dpdk-dev] [PATCH v2 0/7] txgbe backplane AN training Ferruh Yigit
2021-03-24 1:57 ` Jiawen Wu
2021-03-24 10:36 ` Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316105149.110904-6-jiawenwu@trustnetic.com \
--to=jiawenwu@trustnetic.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).