DPDK patches and discussions
 help / color / mirror / Atom feed
From: Tejasree Kondoj <ktejasree@marvell.com>
To: Akhil Goyal <gakhil@marvell.com>,
	Radu Nicolau <radu.nicolau@intel.com>,
	Fiona Trahe <fiona.trahe@intel.com>,
	Fan Zhang <roy.fan.zhang@intel.com>,
	Arek Kusztal <arkadiuszx.kusztal@intel.com>
Cc: Tejasree Kondoj <ktejasree@marvell.com>,
	Anoob Joseph <anoobj@marvell.com>,
	Ankur Dwivedi <adwivedi@marvell.com>,
	Jerin Jacob <jerinj@marvell.com>, <dev@dpdk.org>
Subject: [dpdk-dev] [PATCH v2 1/2] common/cpt: support DIGEST_ENCRYPTED mode
Date: Wed, 24 Mar 2021 22:15:07 +0530	[thread overview]
Message-ID: <20210324164508.2847-2-ktejasree@marvell.com> (raw)
In-Reply-To: <20210324164508.2847-1-ktejasree@marvell.com>

Adding support for DIGEST_ENCRYPTED mode.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
---
 doc/guides/cryptodevs/features/octeontx.ini   |  1 +
 doc/guides/cryptodevs/features/octeontx2.ini  |  1 +
 doc/guides/rel_notes/release_21_05.rst        |  8 ++++
 drivers/common/cpt/cpt_mcode_defines.h        |  7 +++-
 drivers/common/cpt/cpt_ucode.h                | 42 +++++++++++++++----
 drivers/crypto/octeontx/otx_cryptodev_ops.c   | 11 +++--
 drivers/crypto/octeontx2/otx2_cryptodev.c     |  3 +-
 drivers/crypto/octeontx2/otx2_cryptodev_ops.c |  8 +++-
 8 files changed, 67 insertions(+), 14 deletions(-)

diff --git a/doc/guides/cryptodevs/features/octeontx.ini b/doc/guides/cryptodevs/features/octeontx.ini
index 10d94e3f7b..d9776a5788 100644
--- a/doc/guides/cryptodevs/features/octeontx.ini
+++ b/doc/guides/cryptodevs/features/octeontx.ini
@@ -13,6 +13,7 @@ OOP SGL In LB  Out     = Y
 OOP SGL In SGL Out     = Y
 OOP LB  In LB  Out     = Y
 RSA PRIV OP KEY QT     = Y
+Digest encrypted       = Y
 Symmetric sessionless  = Y
 
 ;
diff --git a/doc/guides/cryptodevs/features/octeontx2.ini b/doc/guides/cryptodevs/features/octeontx2.ini
index b0d50ce984..66c5fefde6 100644
--- a/doc/guides/cryptodevs/features/octeontx2.ini
+++ b/doc/guides/cryptodevs/features/octeontx2.ini
@@ -14,6 +14,7 @@ OOP SGL In LB  Out     = Y
 OOP SGL In SGL Out     = Y
 OOP LB  In LB  Out     = Y
 RSA PRIV OP KEY QT     = Y
+Digest encrypted       = Y
 Symmetric sessionless  = Y
 
 ;
diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst
index 8e686cc627..d1cb01e4ed 100644
--- a/doc/guides/rel_notes/release_21_05.rst
+++ b/doc/guides/rel_notes/release_21_05.rst
@@ -94,6 +94,14 @@ New Features
 
   * Added support for preferred busy polling.
 
+* **Updated the OCTEON TX crypto PMD.**
+
+  * Added support for DIGEST_ENCRYPTED mode in OCTEON TX crypto PMD.
+
+* **Updated the OCTEON TX2 crypto PMD.**
+
+  * Added support for DIGEST_ENCRYPTED mode in OCTEON TX2 crypto PMD.
+
 * **Updated testpmd.**
 
   * Added a command line option to configure forced speed for Ethernet port.
diff --git a/drivers/common/cpt/cpt_mcode_defines.h b/drivers/common/cpt/cpt_mcode_defines.h
index 56a745f419..624bdcf3cf 100644
--- a/drivers/common/cpt/cpt_mcode_defines.h
+++ b/drivers/common/cpt/cpt_mcode_defines.h
@@ -20,6 +20,9 @@
 #define CPT_MAJOR_OP_ZUC_SNOW3G	0x37
 #define CPT_MAJOR_OP_KASUMI	0x38
 #define CPT_MAJOR_OP_MISC	0x01
+#define CPT_HMAC_FIRST_BIT_POS	0x4
+#define CPT_FC_MINOR_OP_ENCRYPT	0x0
+#define CPT_FC_MINOR_OP_DECRYPT	0x1
 
 /* AE opcodes */
 #define CPT_MAJOR_OP_MODEX	0x03
@@ -314,8 +317,10 @@ struct cpt_ctx {
 	uint64_t hmac		:1;
 	uint64_t zsk_flags	:3;
 	uint64_t k_ecb		:1;
+	uint64_t auth_enc	:1;
+	uint64_t dec_auth	:1;
 	uint64_t snow3g		:2;
-	uint64_t rsvd		:21;
+	uint64_t rsvd		:19;
 	/* Below fields are accessed by hardware */
 	union {
 		mc_fc_context_t fctx;
diff --git a/drivers/common/cpt/cpt_ucode.h b/drivers/common/cpt/cpt_ucode.h
index 0536620710..ee6d49aae7 100644
--- a/drivers/common/cpt/cpt_ucode.h
+++ b/drivers/common/cpt/cpt_ucode.h
@@ -752,7 +752,9 @@ cpt_enc_hmac_prep(uint32_t flags,
 
 	/* Encryption */
 	vq_cmd_w0.s.opcode.major = CPT_MAJOR_OP_FC;
-	vq_cmd_w0.s.opcode.minor = 0;
+	vq_cmd_w0.s.opcode.minor = CPT_FC_MINOR_OP_ENCRYPT;
+	vq_cmd_w0.s.opcode.minor |= (cpt_ctx->auth_enc <<
+					CPT_HMAC_FIRST_BIT_POS);
 
 	if (hash_type == GMAC_TYPE) {
 		encr_offset = 0;
@@ -779,6 +781,9 @@ cpt_enc_hmac_prep(uint32_t flags,
 		outputlen = enc_dlen + mac_len;
 	}
 
+	if (cpt_ctx->auth_enc != 0)
+		outputlen = enc_dlen;
+
 	/* GP op header */
 	vq_cmd_w0.s.param1 = encr_data_len;
 	vq_cmd_w0.s.param2 = auth_data_len;
@@ -1112,7 +1117,9 @@ cpt_dec_hmac_prep(uint32_t flags,
 
 	/* Decryption */
 	vq_cmd_w0.s.opcode.major = CPT_MAJOR_OP_FC;
-	vq_cmd_w0.s.opcode.minor = 1;
+	vq_cmd_w0.s.opcode.minor = CPT_FC_MINOR_OP_DECRYPT;
+	vq_cmd_w0.s.opcode.minor |= (cpt_ctx->dec_auth <<
+					CPT_HMAC_FIRST_BIT_POS);
 
 	if (hash_type == GMAC_TYPE) {
 		encr_offset = 0;
@@ -1130,6 +1137,9 @@ cpt_dec_hmac_prep(uint32_t flags,
 		outputlen = enc_dlen;
 	}
 
+	if (cpt_ctx->dec_auth != 0)
+		outputlen = inputlen = enc_dlen;
+
 	vq_cmd_w0.s.param1 = encr_data_len;
 	vq_cmd_w0.s.param2 = auth_data_len;
 
@@ -2566,6 +2576,7 @@ fill_sess_cipher(struct rte_crypto_sym_xform *xform,
 		 struct cpt_sess_misc *sess)
 {
 	struct rte_crypto_cipher_xform *c_form;
+	struct cpt_ctx *ctx = SESS_PRIV(sess);
 	cipher_type_t enc_type = 0; /* NULL Cipher type */
 	uint32_t cipher_key_len = 0;
 	uint8_t zsk_flag = 0, aes_ctr = 0, is_null = 0;
@@ -2574,9 +2585,14 @@ fill_sess_cipher(struct rte_crypto_sym_xform *xform,
 
 	if (c_form->op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
 		sess->cpt_op |= CPT_OP_CIPHER_ENCRYPT;
-	else if (c_form->op == RTE_CRYPTO_CIPHER_OP_DECRYPT)
+	else if (c_form->op == RTE_CRYPTO_CIPHER_OP_DECRYPT) {
 		sess->cpt_op |= CPT_OP_CIPHER_DECRYPT;
-	else {
+		if (xform->next != NULL &&
+		    xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH) {
+			/* Perform decryption followed by auth verify */
+			ctx->dec_auth = 1;
+		}
+	} else {
 		CPT_LOG_DP_ERR("Unknown cipher operation\n");
 		return -1;
 	}
@@ -2667,10 +2683,18 @@ static __rte_always_inline int
 fill_sess_auth(struct rte_crypto_sym_xform *xform,
 	       struct cpt_sess_misc *sess)
 {
+	struct cpt_ctx *ctx = SESS_PRIV(sess);
 	struct rte_crypto_auth_xform *a_form;
 	auth_type_t auth_type = 0; /* NULL Auth type */
 	uint8_t zsk_flag = 0, aes_gcm = 0, is_null = 0;
 
+	if (xform->next != NULL &&
+	    xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
+	    xform->next->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) {
+		/* Perform auth followed by encryption */
+		ctx->auth_enc = 1;
+	}
+
 	a_form = &xform->auth;
 
 	if (a_form->op == RTE_CRYPTO_AUTH_OP_VERIFY)
@@ -2993,6 +3017,7 @@ fill_fc_params(struct rte_crypto_op *cop,
 {
 	uint32_t space = 0;
 	struct rte_crypto_sym_op *sym_op = cop->sym;
+	struct cpt_ctx *ctx = SESS_PRIV(sess_misc);
 	void *mdata = NULL;
 	uintptr_t *op;
 	uint32_t mc_hash_off;
@@ -3120,9 +3145,10 @@ fill_fc_params(struct rte_crypto_op *cop,
 				m = m_src;
 
 			/* hmac immediately following data is best case */
-			if (unlikely(rte_pktmbuf_mtod(m, uint8_t *) +
+			if (!ctx->dec_auth && !ctx->auth_enc &&
+				 (unlikely(rte_pktmbuf_mtod(m, uint8_t *) +
 			    mc_hash_off !=
-			     (uint8_t *)sym_op->auth.digest.data)) {
+			     (uint8_t *)sym_op->auth.digest.data))) {
 				flags |= VALID_MAC_BUF;
 				fc_params.mac_buf.size =
 					sess_misc->mac_len;
@@ -3137,7 +3163,9 @@ fill_fc_params(struct rte_crypto_op *cop,
 	fc_params.ctx_buf.vaddr = SESS_PRIV(sess_misc);
 	fc_params.ctx_buf.dma_addr = sess_misc->ctx_dma_addr;
 
-	if (unlikely(sess_misc->is_null || sess_misc->cpt_op == CPT_OP_DECODE))
+	if (!ctx->dec_auth &&
+		  unlikely(sess_misc->is_null ||
+		  sess_misc->cpt_op == CPT_OP_DECODE))
 		inplace = 0;
 
 	if (likely(!m_dst && inplace)) {
diff --git a/drivers/crypto/octeontx/otx_cryptodev_ops.c b/drivers/crypto/octeontx/otx_cryptodev_ops.c
index b74eb2694b..d75f4b5f81 100644
--- a/drivers/crypto/octeontx/otx_cryptodev_ops.c
+++ b/drivers/crypto/octeontx/otx_cryptodev_ops.c
@@ -205,12 +205,16 @@ sym_xform_verify(struct rte_crypto_sym_xform *xform)
 	if (xform->next) {
 		if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
 		    xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
-		    xform->next->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+		    xform->next->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT &&
+		    (xform->auth.algo != RTE_CRYPTO_AUTH_SHA1_HMAC ||
+		     xform->next->cipher.algo != RTE_CRYPTO_CIPHER_AES_CBC))
 			return -ENOTSUP;
 
 		if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
 		    xform->cipher.op == RTE_CRYPTO_CIPHER_OP_DECRYPT &&
-		    xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+		    xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
+		    (xform->cipher.algo != RTE_CRYPTO_CIPHER_AES_CBC ||
+		     xform->next->auth.algo != RTE_CRYPTO_AUTH_SHA1_HMAC))
 			return -ENOTSUP;
 
 		if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
@@ -1004,7 +1008,8 @@ otx_cpt_dev_create(struct rte_cryptodev *c_dev)
 				RTE_CRYPTODEV_FF_OOP_LB_IN_LB_OUT |
 				RTE_CRYPTODEV_FF_OOP_SGL_IN_LB_OUT |
 				RTE_CRYPTODEV_FF_OOP_SGL_IN_SGL_OUT |
-				RTE_CRYPTODEV_FF_SYM_SESSIONLESS;
+				RTE_CRYPTODEV_FF_SYM_SESSIONLESS |
+				RTE_CRYPTODEV_FF_DIGEST_ENCRYPTED;
 		break;
 	default:
 		/* Feature not supported. Abort */
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev.c b/drivers/crypto/octeontx2/otx2_cryptodev.c
index e0a559b663..7f45e57cce 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev.c
@@ -123,7 +123,8 @@ otx2_cpt_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
 			     RTE_CRYPTODEV_FF_ASYMMETRIC_CRYPTO |
 			     RTE_CRYPTODEV_FF_RSA_PRIV_OP_KEY_QT |
 			     RTE_CRYPTODEV_FF_SYM_SESSIONLESS |
-			     RTE_CRYPTODEV_FF_SECURITY;
+			     RTE_CRYPTODEV_FF_SECURITY |
+			     RTE_CRYPTODEV_FF_DIGEST_ENCRYPTED;
 
 	if (rte_eal_process_type() == RTE_PROC_SECONDARY)
 		otx2_cpt_set_enqdeq_fns(dev);
diff --git a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
index cec20b5c6d..fc4d5bac49 100644
--- a/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
+++ b/drivers/crypto/octeontx2/otx2_cryptodev_ops.c
@@ -322,12 +322,16 @@ sym_xform_verify(struct rte_crypto_sym_xform *xform)
 	if (xform->next) {
 		if (xform->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
 		    xform->next->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
-		    xform->next->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT)
+		    xform->next->cipher.op == RTE_CRYPTO_CIPHER_OP_ENCRYPT &&
+		    (xform->auth.algo != RTE_CRYPTO_AUTH_SHA1_HMAC ||
+		     xform->next->cipher.algo != RTE_CRYPTO_CIPHER_AES_CBC))
 			return -ENOTSUP;
 
 		if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
 		    xform->cipher.op == RTE_CRYPTO_CIPHER_OP_DECRYPT &&
-		    xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH)
+		    xform->next->type == RTE_CRYPTO_SYM_XFORM_AUTH &&
+		    (xform->cipher.algo != RTE_CRYPTO_CIPHER_AES_CBC ||
+		     xform->next->auth.algo != RTE_CRYPTO_AUTH_SHA1_HMAC))
 			return -ENOTSUP;
 
 		if (xform->type == RTE_CRYPTO_SYM_XFORM_CIPHER &&
-- 
2.27.0


  reply	other threads:[~2021-03-24 15:49 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-24 16:45 [dpdk-dev] [PATCH v2 0/2] support block cipher " Tejasree Kondoj
2021-03-24 16:45 ` Tejasree Kondoj [this message]
2021-03-31 19:44   ` [dpdk-dev] [PATCH v2 1/2] common/cpt: support " Akhil Goyal
2021-03-24 16:45 ` [dpdk-dev] [PATCH v2 2/2] test/crypto: support block cipher " Tejasree Kondoj
2021-03-31 19:46   ` Akhil Goyal
2021-04-05 18:26 ` [dpdk-dev] [PATCH v2 0/2] " Akhil Goyal

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210324164508.2847-2-ktejasree@marvell.com \
    --to=ktejasree@marvell.com \
    --cc=adwivedi@marvell.com \
    --cc=anoobj@marvell.com \
    --cc=arkadiuszx.kusztal@intel.com \
    --cc=dev@dpdk.org \
    --cc=fiona.trahe@intel.com \
    --cc=gakhil@marvell.com \
    --cc=jerinj@marvell.com \
    --cc=radu.nicolau@intel.com \
    --cc=roy.fan.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).