From: Liulingyu <lingyu.liu@intel.com>
To: dev@dpdk.org, qi.z.zhang@intel.com, beilei.xing@intel.com
Cc: Liulingyu <lingyu.liu@intel.com>
Subject: [dpdk-dev] [RFC v1] mbuf: support eCPRI hardware packet type
Date: Wed, 7 Apr 2021 14:18:42 +0000 [thread overview]
Message-ID: <20210407141842.483976-1-lingyu.liu@intel.com> (raw)
Add L2_ETHER_ECPRI and L4_UDP_TUNNEL_ECPRI in RTE_PTYPE.
Signed-off-by: Liulingyu <lingyu.liu@intel.com>
---
app/test-pmd/util.c | 25 ++++++++++++++++---------
lib/librte_mbuf/rte_mbuf_ptype.c | 2 ++
lib/librte_mbuf/rte_mbuf_ptype.h | 22 ++++++++++++++++++++++
3 files changed, 40 insertions(+), 9 deletions(-)
diff --git a/app/test-pmd/util.c b/app/test-pmd/util.c
index a9e431a8b2..494ebbf909 100644
--- a/app/test-pmd/util.c
+++ b/app/test-pmd/util.c
@@ -258,16 +258,23 @@ dump_pkt_burst(uint16_t port_id, uint16_t queue, struct rte_mbuf *pkts[],
udp_hdr = rte_pktmbuf_mtod_offset(mb,
struct rte_udp_hdr *,
l2_len + l3_len);
- l4_len = sizeof(struct rte_udp_hdr);
- vxlan_hdr = rte_pktmbuf_mtod_offset(mb,
- struct rte_vxlan_hdr *,
- l2_len + l3_len + l4_len);
udp_port = RTE_BE_TO_CPU_16(udp_hdr->dst_port);
- vx_vni = rte_be_to_cpu_32(vxlan_hdr->vx_vni);
- MKDUMPSTR(print_buf, buf_size, cur_len,
- " - VXLAN packet: packet type =%d, "
- "Destination UDP port =%d, VNI = %d",
- packet_type, udp_port, vx_vni >> 8);
+ l4_len = sizeof(struct rte_udp_hdr);
+ if (RTE_ETH_IS_ECPRI_HDR(packet_type)) {
+ MKDUMPSTR(print_buf, buf_size, cur_len,
+ " - eCPRI packet: packet type =%d, "
+ "Destination UDP port =%d",
+ packet_type, udp_port);
+ } else {
+ vxlan_hdr = rte_pktmbuf_mtod_offset(mb,
+ struct rte_vxlan_hdr *,
+ l2_len + l3_len + l4_len);
+ vx_vni = rte_be_to_cpu_32(vxlan_hdr->vx_vni);
+ MKDUMPSTR(print_buf, buf_size, cur_len,
+ " - VXLAN packet: packet type =%d, "
+ "Destination UDP port =%d, VNI = %d",
+ packet_type, udp_port, vx_vni >> 8);
+ }
}
}
MKDUMPSTR(print_buf, buf_size, cur_len,
diff --git a/lib/librte_mbuf/rte_mbuf_ptype.c b/lib/librte_mbuf/rte_mbuf_ptype.c
index d6f906b06c..2bf97c89c6 100644
--- a/lib/librte_mbuf/rte_mbuf_ptype.c
+++ b/lib/librte_mbuf/rte_mbuf_ptype.c
@@ -21,6 +21,7 @@ const char *rte_get_ptype_l2_name(uint32_t ptype)
case RTE_PTYPE_L2_ETHER_PPPOE: return "L2_ETHER_PPPOE";
case RTE_PTYPE_L2_ETHER_FCOE: return "L2_ETHER_FCOE";
case RTE_PTYPE_L2_ETHER_MPLS: return "L2_ETHER_MPLS";
+ case RTE_PTYPE_L2_ETHER_ECPRI: return "L2_ETHER_ECPRI";
default: return "L2_UNKNOWN";
}
}
@@ -71,6 +72,7 @@ const char *rte_get_ptype_tunnel_name(uint32_t ptype)
case RTE_PTYPE_TUNNEL_VXLAN_GPE: return "TUNNEL_VXLAN_GPE";
case RTE_PTYPE_TUNNEL_MPLS_IN_UDP: return "TUNNEL_MPLS_IN_UDP";
case RTE_PTYPE_TUNNEL_MPLS_IN_GRE: return "TUNNEL_MPLS_IN_GRE";
+ case RTE_PTYPE_TUNNEL_ECPRI: return "TUNNEL_ECPRI";
default: return "TUNNEL_UNKNOWN";
}
}
diff --git a/lib/librte_mbuf/rte_mbuf_ptype.h b/lib/librte_mbuf/rte_mbuf_ptype.h
index 17a2dd3576..3a647feffe 100644
--- a/lib/librte_mbuf/rte_mbuf_ptype.h
+++ b/lib/librte_mbuf/rte_mbuf_ptype.h
@@ -144,6 +144,13 @@ extern "C" {
* <'ether type'=[0x8847|0x8848]>
*/
#define RTE_PTYPE_L2_ETHER_MPLS 0x0000000a
+/**
+ * eCPRI (extend Common Public Radio Interface) packet type.
+ *
+ * Packet format:
+ * <'ether type'=[0xAEFE]>
+ */
+#define RTE_PTYPE_L2_ETHER_ECPRI 0x0000000b
/**
* Mask of layer 2 packet types.
* It is used for outer packet for tunneling cases.
@@ -491,6 +498,19 @@ extern "C" {
* | 'destination port'=6635>
*/
#define RTE_PTYPE_TUNNEL_MPLS_IN_UDP 0x0000d000
+/**
+ * ECPRI packet type.
+ *
+ * Packet format:
+ * <'ether type'=0xAEFE
+ * | 'version'=4, 'protocol'=17,
+ * | 'destination port'=5123>
+ * or,
+ * <'ether type'=0xAEFE>
+ * | 'version'=6, 'protocol'=17,
+ * | 'destination port'=5123>
+ */
+#define RTE_PTYPE_TUNNEL_ECPRI 0x0000e000
/**
* Mask of tunneling packet types.
*/
@@ -688,6 +708,8 @@ extern "C" {
RTE_PTYPE_INNER_L3_MASK | \
RTE_PTYPE_INNER_L4_MASK))
+/* Check if it is a ECPRI packet */
+#define RTE_ETH_IS_ECPRI_HDR(ptype) ((ptype) & RTE_PTYPE_TUNNEL_ECPRI)
/**
* Get the name of the l2 packet type
*
--
2.25.1
next reply other threads:[~2021-04-07 7:43 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-07 14:18 Liulingyu [this message]
2021-04-07 15:09 ` [dpdk-dev] [RFC v2] " Liulingyu
2021-04-07 15:24 ` Hemant Agrawal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210407141842.483976-1-lingyu.liu@intel.com \
--to=lingyu.liu@intel.com \
--cc=beilei.xing@intel.com \
--cc=dev@dpdk.org \
--cc=qi.z.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).